* Backwards 11ac
@ 2016-10-30 20:50 James Cloos
2016-10-30 23:43 ` Sebastian Gottschall
0 siblings, 1 reply; 4+ messages in thread
From: James Cloos @ 2016-10-30 20:50 UTC (permalink / raw)
To: linux-wireless
I recently received my turris omnia and put it into operation yesterday.
(It is only doing wireless; I have a different box for my main router.)
All of the machines on the wlan show backwards transfer speeds; they
upload reasonable fast but downloads are in the kbit/s range.
That applies to the both the 11ac-capable machines and the 11n-on-2.4
machines.
Luci's status/overview page shows 'Bitrate: 6 Mbit/s' for the ath10k and
'Bitrate: 61.5 Mbit/s' for the ath9k.
(The two wireless cards in it are:
01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
)
Googling has not helped me figure out how to get propper bandwidth.
All of the search results were about wan links, not about wlan links.
What should I look at to diagnose this?
-JimC
--
James Cloos <cloos@jhcloos.com> OpenPGP: 0x997A9F17ED7DAEA6
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Backwards 11ac
2016-10-30 20:50 Backwards 11ac James Cloos
@ 2016-10-30 23:43 ` Sebastian Gottschall
2016-10-31 18:35 ` James Cloos
0 siblings, 1 reply; 4+ messages in thread
From: Sebastian Gottschall @ 2016-10-30 23:43 UTC (permalink / raw)
To: James Cloos, linux-wireless
ath10k cannot show tx rates right now in a easy way. since tx rate
handling is done by the cards own firmware and not by the mac80211
wireless stack
Sebastian
Am 30.10.2016 um 21:50 schrieb James Cloos:
> I recently received my turris omnia and put it into operation yesterday.
>
> (It is only doing wireless; I have a different box for my main router.)
>
> All of the machines on the wlan show backwards transfer speeds; they
> upload reasonable fast but downloads are in the kbit/s range.
>
> That applies to the both the 11ac-capable machines and the 11n-on-2.4
> machines.
>
> Luci's status/overview page shows 'Bitrate: 6 Mbit/s' for the ath10k and
> 'Bitrate: 61.5 Mbit/s' for the ath9k.
>
> (The two wireless cards in it are:
>
> 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
> 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
> )
>
> Googling has not helped me figure out how to get propper bandwidth.
> All of the search results were about wan links, not about wlan links.
>
> What should I look at to diagnose this?
>
> -JimC
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Berliner Ring 101, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-31 21:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-30 20:50 Backwards 11ac James Cloos
2016-10-30 23:43 ` Sebastian Gottschall
2016-10-31 18:35 ` James Cloos
[not found] ` <89dd7bd2-f6de-ea90-79ee-65d73d264522@dd-wrt.com>
2016-10-31 21:02 ` James Cloos
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.