From: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
To: Jeff King <peff@peff.net>
Cc: Junio C Hamano <gitster@pobox.com>,
Michael Haggerty <mhagger@alum.mit.edu>,
git@vger.kernel.org
Subject: Re: push.default: current vs upstream
Date: Thu, 12 Apr 2012 10:59:06 +0200 [thread overview]
Message-ID: <vpqfwc9wckl.fsf@bauges.imag.fr> (raw)
In-Reply-To: <20120412081407.GE31122@sigill.intra.peff.net> (Jeff King's message of "Thu, 12 Apr 2012 04:14:07 -0400")
Jeff King <peff@peff.net> writes:
> Then the rule is not really "act only if upstream and current would do
> the same thing".
Right. That would be closer to "fail with explicit error when where to
push is not clear enough".
> On the one hand, I think what you are suggesting is reasonable in most
> cases. On the other hand, what if the lack of upstream is because the
> user failed to configure it properly? Then it could be surprising.
>
> I don't have a strong opinion either way.
No strong opinion either, but I wanted to raise the point to make sure
we agree.
With your patch, "git push" fails with
fatal: The current branch branch-name has no upstream branch.
To push the current branch and set the remote as upstream, use
git push --set-upstream origin branch-name
so it's not really bad: the suggestion guides the user to a situation
where the next "git push" will succeed unambiguously. As a side effect,
the next "git pull" will fetch from the same branch, which is probably
what the user wants if he hasn't explicitely configured an upstream
branch yet.
--
Matthieu Moy
http://www-verimag.imag.fr/~moy/
next prev parent reply other threads:[~2012-04-12 8:59 UTC|newest]
Thread overview: 152+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-28 19:47 [ANNOUNCE] Git 1.7.10-rc3 Junio C Hamano
2012-03-29 9:52 ` Jeff King
2012-03-29 21:22 ` Junio C Hamano
2012-03-29 22:11 ` Jeff King
2012-03-30 1:54 ` Junio C Hamano
2012-03-30 7:13 ` push.default: current vs upstream Jeff King
2012-03-30 20:25 ` Junio C Hamano
2012-03-30 21:01 ` Jeff King
2012-03-30 21:28 ` Junio C Hamano
2012-03-30 21:53 ` Jeff King
2012-03-30 22:15 ` Junio C Hamano
2012-03-30 22:20 ` Jeff King
2012-03-30 23:12 ` Junio C Hamano
2012-03-31 22:49 ` Nathan Gray
2012-03-31 23:48 ` Seth Robertson
2012-04-01 2:22 ` Junio C Hamano
2012-04-01 5:58 ` Nathan Gray
2012-04-02 7:40 ` Matthieu Moy
2012-04-02 16:48 ` Junio C Hamano
2012-04-02 17:20 ` Matthieu Moy
2012-04-02 18:40 ` Junio C Hamano
2012-04-02 18:58 ` Matthieu Moy
2012-04-02 19:47 ` Junio C Hamano
2012-04-02 20:40 ` Matthieu Moy
2012-04-02 20:50 ` Junio C Hamano
2012-04-02 21:02 ` demerphq
2012-04-02 21:16 ` Matthieu Moy
2012-04-04 7:57 ` demerphq
2012-04-05 13:13 ` Jeff King
2012-04-05 16:46 ` Matthieu Moy
2012-04-06 7:15 ` Jeff King
2012-04-06 7:44 ` Matthieu Moy
2012-04-06 8:00 ` Jeff King
2012-04-06 17:41 ` Junio C Hamano
2012-04-06 18:01 ` Jehan Bing
2012-04-07 7:49 ` Michael Haggerty
2012-04-07 7:51 ` Jeff King
2012-04-07 8:40 ` Andrew Sayers
2012-04-12 7:11 ` Jeff King
2012-04-12 15:04 ` Junio C Hamano
2012-04-12 21:16 ` Andrew Sayers
2012-04-12 21:33 ` Junio C Hamano
2012-04-12 22:11 ` Jeff King
2012-04-12 22:59 ` Philip Oakley
2012-04-13 19:31 ` Junio C Hamano
2012-04-17 20:13 ` Andrew Sayers
2012-04-08 4:43 ` Junio C Hamano
2012-04-11 16:17 ` Matthieu Moy
2012-04-11 16:44 ` Junio C Hamano
2012-04-12 7:55 ` Jeff King
2012-04-12 8:09 ` Matthieu Moy
2012-04-12 8:14 ` Jeff King
2012-04-12 8:59 ` Matthieu Moy [this message]
2012-04-12 15:56 ` Junio C Hamano
2012-04-19 16:06 ` Junio C Hamano
2012-04-19 20:38 ` Matthieu Moy
2012-04-19 21:02 ` Junio C Hamano
2012-04-19 22:57 ` [RFC/PATCH 0/3] push.default upcomming change Matthieu Moy
2012-04-19 22:57 ` [PATCH 1/3] push: introduce new push.default mode "simple" Matthieu Moy
2012-04-19 23:46 ` Jeff King
2012-04-20 14:52 ` Matthieu Moy
2012-04-20 14:59 ` [PATCH 0/4 v2] push.default upcomming change Matthieu Moy
2012-04-20 14:59 ` [PATCH 1/4] Documentation: explain push.default option a bit more Matthieu Moy
2012-04-20 20:13 ` Jeff King
2012-04-20 21:28 ` Junio C Hamano
2012-04-21 3:51 ` Michael Haggerty
2012-04-21 4:08 ` Junio C Hamano
2012-04-21 5:01 ` Michael Haggerty
2012-04-21 5:42 ` Junio C Hamano
2012-04-20 14:59 ` [PATCH 2/4] push: introduce new push.default mode "simple" Matthieu Moy
2012-04-20 20:33 ` Jeff King
2012-04-22 16:24 ` Zbigniew Jędrzejewski-Szmek
2012-04-20 21:42 ` Junio C Hamano
2012-04-23 8:38 ` Matthieu Moy
2012-04-20 14:59 ` [PATCH 3/4] t5570: use explicit push refspec Matthieu Moy
2012-04-20 14:59 ` [PATCH 4/4] push: start warning upcoming default change for push.default Matthieu Moy
2012-04-20 20:35 ` [PATCH 0/4 v2] push.default upcomming change Jeff King
2012-04-22 11:05 ` Matthieu Moy
2012-04-23 2:50 ` Junio C Hamano
2012-04-23 8:37 ` [PATCH 0/7 v3] " Matthieu Moy
2012-04-23 8:37 ` [PATCH 1/7] Documentation: explain push.default option a bit more Matthieu Moy
2012-04-23 15:20 ` Junio C Hamano
2012-04-23 19:00 ` Philip Oakley
2012-04-23 19:11 ` Junio C Hamano
2012-04-23 21:01 ` Philip Oakley
2012-04-23 8:37 ` [PATCH 2/7] Undocument deprecated alias 'push.default=tracking' Matthieu Moy
2012-04-23 15:21 ` Junio C Hamano
2013-01-31 17:10 ` Ævar Arnfjörð Bjarmason
2013-01-31 17:35 ` Junio C Hamano
2013-01-31 19:07 ` Jonathan Nieder
2013-01-31 19:11 ` Jonathan Nieder
2013-01-31 19:58 ` Junio C Hamano
2013-01-31 19:41 ` Junio C Hamano
2013-01-31 19:57 ` Jonathan Nieder
2013-01-31 20:01 ` Junio C Hamano
2013-01-31 20:11 ` Jonathan Nieder
2013-01-31 20:42 ` Junio C Hamano
2013-01-31 20:44 ` Junio C Hamano
2013-01-31 20:04 ` Jonathan Nieder
2013-01-31 20:08 ` Matthieu Moy
2013-01-31 20:21 ` Junio C Hamano
2013-01-31 20:50 ` Junio C Hamano
2013-01-31 21:00 ` Jonathan Nieder
2013-02-01 1:15 ` Junio C Hamano
2013-01-31 21:08 ` Jonathan Nieder
2013-01-31 20:41 ` Philip Oakley
2012-04-23 8:38 ` [PATCH 3/7] t5528-push-default.sh: add helper functions Matthieu Moy
2012-04-23 15:36 ` Junio C Hamano
2012-04-23 16:02 ` Matthieu Moy
2012-04-23 16:16 ` Junio C Hamano
2012-04-23 16:20 ` Matthieu Moy
2012-04-23 16:57 ` Matthieu Moy
2012-04-23 17:09 ` Junio C Hamano
2012-04-23 16:42 ` Junio C Hamano
2012-04-23 16:45 ` [PATCH 2/3] fixup! " Junio C Hamano
2012-04-23 16:48 ` [PATCH 3/3] push: suggested updates to push configuration documentation Junio C Hamano
2012-04-23 8:38 ` [PATCH 4/7] push: introduce new push.default mode "simple" Matthieu Moy
2012-04-23 10:32 ` Michael Haggerty
2012-04-23 11:20 ` Matthieu Moy
2012-04-23 15:52 ` Junio C Hamano
2012-04-23 16:09 ` Matthieu Moy
2012-04-23 8:38 ` [PATCH 5/7] t5570: use explicit push refspec Matthieu Moy
2012-04-23 8:38 ` [PATCH 6/7] push: document the future default change for push.default (matching -> simple) Matthieu Moy
2012-04-23 8:38 ` [PATCH 7/7] push: start warning upcoming default change for push.default Matthieu Moy
2012-04-24 7:49 ` [PATCH 0/7 v4] push.default upcomming change Matthieu Moy
2012-04-24 7:50 ` [PATCH 1/7] Documentation: explain push.default option a bit more Matthieu Moy
2012-04-24 7:50 ` [PATCH 2/7] Undocument deprecated alias 'push.default=tracking' Matthieu Moy
2012-04-24 7:50 ` [PATCH 3/7] t5528-push-default.sh: add helper functions Matthieu Moy
2012-04-24 7:50 ` [PATCH 4/7] push: introduce new push.default mode "simple" Matthieu Moy
2012-04-25 1:53 ` Junio C Hamano
2012-04-25 11:01 ` Matthieu Moy
2012-04-24 7:50 ` [PATCH 5/7] t5570: use explicit push refspec Matthieu Moy
2012-04-24 7:50 ` [PATCH 6/7] push: document the future default change for push.default (matching -> simple) Matthieu Moy
2012-04-24 7:50 ` [PATCH 7/7] push: start warning upcoming default change for push.default Matthieu Moy
2012-04-24 19:28 ` [PATCH 0/7 v4] push.default upcomming change Junio C Hamano
2012-04-19 22:57 ` [PATCH 2/3] t5570: use explicit push refspec Matthieu Moy
2012-04-19 22:57 ` [PATCH 3/3] push: start warning upcoming default change for push.default Matthieu Moy
2012-04-26 5:44 ` [PATCH] t5541: warning message is given even with --quiet Junio C Hamano
2012-04-26 6:31 ` Matthieu Moy
2012-04-11 2:08 ` [RFC/PATCH] Give better 'pull' advice when pushing non-ff updates to current branch Christopher Tiwald
2012-04-06 11:38 ` push.default: current vs upstream Dmitry Potapov
2012-04-06 13:36 ` demerphq
2012-04-06 18:03 ` Dmitry Potapov
2012-04-06 18:48 ` demerphq
2012-04-06 19:38 ` Dmitry Potapov
2012-03-30 23:07 ` Junio C Hamano
2012-04-03 20:59 ` Jeff King
2012-04-03 21:04 ` Jeff King
2012-04-03 22:29 ` Junio C Hamano
2012-04-03 23:23 ` Junio C Hamano
2012-04-05 12:45 ` Jeff King
2012-04-08 12:52 ` Felipe Contreras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=vpqfwc9wckl.fsf@bauges.imag.fr \
--to=matthieu.moy@grenoble-inp.fr \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=mhagger@alum.mit.edu \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.