* [PATCH 00/13] lpfc new hardware patches for 12.0.0.0
@ 2018-01-26 19:31 James Smart
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
` (12 more replies)
0 siblings, 13 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart
This patch set adds support for Broadcom's new G7 product that
supports G4G FC.
The patches were cut against the Martin's 4.16/scsi-queue tree.
The patches are dependent (layered on top of) the lpfc 11.4.0.7
patchset that was recently posted. See:
https://www.spinics.net/lists/linux-scsi/msg116956.html
James Smart (13):
lpfc: Rework lpfc to allow different sli4 cq and eq handlers
lpfc: Rework sli4 doorbell infrastructure
lpfc: Add SLI-4 if_type=6 support to the code base
lpfc: Add push-to-adapter support to sli4
lpfc: Add PCI Ids for if_type=6 hardware
lpfc: Add 64G link speed support
lpfc: Add if_type=6 support for cycling valid bits
lpfc: Enable fw download on if_type=6 devices
lpfc: Add embedded data pointers for enhanced performance
lpfc: Fix nvme embedded io length on new hardware
lpfc: Work around NVME cmd iu SGL type
lpfc: update driver version to 12.0.0.0
lpfc: Update 12.0.0.0 modified files for 2018 Copyright
drivers/scsi/lpfc/lpfc.h | 20 +-
drivers/scsi/lpfc/lpfc_attr.c | 85 +++++--
drivers/scsi/lpfc/lpfc_bsg.c | 6 +-
drivers/scsi/lpfc/lpfc_ct.c | 7 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 22 +-
drivers/scsi/lpfc/lpfc_debugfs.h | 13 +-
drivers/scsi/lpfc/lpfc_els.c | 5 +
drivers/scsi/lpfc/lpfc_hbadisc.c | 1 +
drivers/scsi/lpfc/lpfc_hw.h | 15 +-
drivers/scsi/lpfc/lpfc_hw4.h | 115 ++++++++-
drivers/scsi/lpfc/lpfc_ids.h | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 245 +++++++++++++++---
drivers/scsi/lpfc/lpfc_mbox.c | 4 +
drivers/scsi/lpfc/lpfc_nvme.c | 69 +++--
drivers/scsi/lpfc/lpfc_nvmet.c | 24 ++
drivers/scsi/lpfc/lpfc_scsi.c | 8 +-
drivers/scsi/lpfc/lpfc_sli.c | 535 +++++++++++++++++++++++++++++----------
drivers/scsi/lpfc/lpfc_sli4.h | 30 ++-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
19 files changed, 960 insertions(+), 250 deletions(-)
--
2.13.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
@ 2018-01-26 19:31 ` James Smart
2018-02-07 0:26 ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 02/13] lpfc: Rework sli4 doorbell infrastructure James Smart
` (11 subsequent siblings)
12 siblings, 1 reply; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Up until now, an SLI-4 device had no variance in the way it handled
its EQs and CQs. With newer hardware, there are now differences in
doorbells and some differences in how entries are valid.
Prepare the code for new hardwre by creating a sli4-based callout
table that can be set based on if_type.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_init.c | 7 +++++
drivers/scsi/lpfc/lpfc_sli.c | 63 ++++++++++++++++++++++---------------------
drivers/scsi/lpfc/lpfc_sli4.h | 5 ++++
3 files changed, 44 insertions(+), 31 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 04a77c308836..fc26c4b58d6b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9540,6 +9540,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
}
+ /* Set up the EQ/CQ register handeling functions now */
+ if (if_type <= LPFC_SLI_INTF_IF_TYPE_2) {
+ phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr;
+ phba->sli4_hba.sli4_eq_release = lpfc_sli4_eq_release;
+ phba->sli4_hba.sli4_cq_release = lpfc_sli4_cq_release;
+ }
+
return 0;
out_iounmap_all:
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e97d080e9f65..f91caae6489a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -299,7 +299,7 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
* @q: The Event Queue to disable interrupts
*
**/
-static inline void
+inline void
lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
{
struct lpfc_register doorbell;
@@ -5302,41 +5302,42 @@ static void
lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
{
int qidx;
+ struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
- lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
- lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
- if (phba->sli4_hba.nvmels_cq)
- lpfc_sli4_cq_release(phba->sli4_hba.nvmels_cq,
+ sli4_hba->sli4_cq_release(sli4_hba->mbx_cq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_cq_release(sli4_hba->els_cq, LPFC_QUEUE_REARM);
+ if (sli4_hba->nvmels_cq)
+ sli4_hba->sli4_cq_release(sli4_hba->nvmels_cq,
LPFC_QUEUE_REARM);
- if (phba->sli4_hba.fcp_cq)
+ if (sli4_hba->fcp_cq)
for (qidx = 0; qidx < phba->cfg_fcp_io_channel; qidx++)
- lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[qidx],
+ sli4_hba->sli4_cq_release(sli4_hba->fcp_cq[qidx],
LPFC_QUEUE_REARM);
- if (phba->sli4_hba.nvme_cq)
+ if (sli4_hba->nvme_cq)
for (qidx = 0; qidx < phba->cfg_nvme_io_channel; qidx++)
- lpfc_sli4_cq_release(phba->sli4_hba.nvme_cq[qidx],
+ sli4_hba->sli4_cq_release(sli4_hba->nvme_cq[qidx],
LPFC_QUEUE_REARM);
if (phba->cfg_fof)
- lpfc_sli4_cq_release(phba->sli4_hba.oas_cq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_cq_release(sli4_hba->oas_cq, LPFC_QUEUE_REARM);
- if (phba->sli4_hba.hba_eq)
+ if (sli4_hba->hba_eq)
for (qidx = 0; qidx < phba->io_channel_irqs; qidx++)
- lpfc_sli4_eq_release(phba->sli4_hba.hba_eq[qidx],
- LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(sli4_hba->hba_eq[qidx],
+ LPFC_QUEUE_REARM);
if (phba->nvmet_support) {
for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++) {
- lpfc_sli4_cq_release(
- phba->sli4_hba.nvmet_cqset[qidx],
+ sli4_hba->sli4_cq_release(
+ sli4_hba->nvmet_cqset[qidx],
LPFC_QUEUE_REARM);
}
}
if (phba->cfg_fof)
- lpfc_sli4_eq_release(phba->sli4_hba.fof_eq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(sli4_hba->fof_eq, LPFC_QUEUE_REARM);
}
/**
@@ -7270,7 +7271,7 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
bool
lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
{
-
+ struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
uint32_t eqidx;
struct lpfc_queue *fpeq = NULL;
struct lpfc_eqe *eqe;
@@ -7281,11 +7282,11 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Find the eq associated with the mcq */
- if (phba->sli4_hba.hba_eq)
+ if (sli4_hba->hba_eq)
for (eqidx = 0; eqidx < phba->io_channel_irqs; eqidx++)
- if (phba->sli4_hba.hba_eq[eqidx]->queue_id ==
- phba->sli4_hba.mbx_cq->assoc_qid) {
- fpeq = phba->sli4_hba.hba_eq[eqidx];
+ if (sli4_hba->hba_eq[eqidx]->queue_id ==
+ sli4_hba->mbx_cq->assoc_qid) {
+ fpeq = sli4_hba->hba_eq[eqidx];
break;
}
if (!fpeq)
@@ -7293,7 +7294,7 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Turn off interrupts from this EQ */
- lpfc_sli4_eq_clr_intr(fpeq);
+ sli4_hba->sli4_eq_clr_intr(fpeq);
/* Check to see if a mbox completion is pending */
@@ -7314,7 +7315,7 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
/* Always clear and re-arm the EQ */
- lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+ sli4_hba->sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
return mbox_pending;
@@ -9494,7 +9495,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
fpeq = phba->sli4_hba.hba_eq[idx];
/* Turn off interrupts from this EQ */
- lpfc_sli4_eq_clr_intr(fpeq);
+ phba->sli4_hba.sli4_eq_clr_intr(fpeq);
/*
* Process all the events on FCP EQ
@@ -9506,7 +9507,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
}
/* Always clear and re-arm the EQ */
- lpfc_sli4_eq_release(fpeq,
+ phba->sli4_hba.sli4_eq_release(fpeq,
LPFC_QUEUE_REARM);
}
atomic_inc(&hba_eq_hdl->hba_eq_in_use);
@@ -13136,7 +13137,7 @@ lpfc_sli4_sp_process_cq(struct work_struct *work)
"(x%x), type (%d)\n", cq->queue_id, cq->type);
/* In any case, flash and re-arm the RCQ */
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_cq_release(cq, LPFC_QUEUE_REARM);
/* wake up worker thread if there are works to be done */
if (workposted)
@@ -13568,7 +13569,7 @@ lpfc_sli4_hba_process_cq(struct work_struct *work)
"queue fcpcqid=%d\n", cq->queue_id);
/* In any case, flash and re-arm the CQ */
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_cq_release(cq, LPFC_QUEUE_REARM);
/* wake up worker thread if there are works to be done */
if (workposted)
@@ -13585,7 +13586,7 @@ lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
;
/* Clear and re-arm the EQ */
- lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(eq, LPFC_QUEUE_REARM);
}
@@ -13733,7 +13734,7 @@ lpfc_sli4_fof_intr_handler(int irq, void *dev_id)
}
}
/* Always clear and re-arm the fast-path EQ */
- lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(eq, LPFC_QUEUE_REARM);
return IRQ_HANDLED;
}
@@ -13791,7 +13792,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
if (lpfc_fcp_look_ahead) {
if (atomic_dec_and_test(&hba_eq_hdl->hba_eq_in_use))
- lpfc_sli4_eq_clr_intr(fpeq);
+ phba->sli4_hba.sli4_eq_clr_intr(fpeq);
else {
atomic_inc(&hba_eq_hdl->hba_eq_in_use);
return IRQ_NONE;
@@ -13826,7 +13827,7 @@ lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
fpeq->EQ_max_eqe = ecount;
/* Always clear and re-arm the fast-path EQ */
- lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+ phba->sli4_hba.sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
if (unlikely(ecount == 0)) {
fpeq->EQ_no_entry++;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 4545c1fdcb55..0c0cbe296fed 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -582,6 +582,10 @@ struct lpfc_sli4_hba {
struct lpfc_bbscn_params bbscn_params;
struct lpfc_hba_eq_hdl *hba_eq_hdl; /* HBA per-WQ handle */
+ void (*sli4_eq_clr_intr)(struct lpfc_queue *q);
+ uint32_t (*sli4_eq_release)(struct lpfc_queue *q, bool arm);
+ uint32_t (*sli4_cq_release)(struct lpfc_queue *q, bool arm);
+
/* Pointers to the constructed SLI4 queues */
struct lpfc_queue **hba_eq; /* Event queues for HBA */
struct lpfc_queue **fcp_cq; /* Fast-path FCP compl queue */
@@ -848,6 +852,7 @@ void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
int lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba);
int lpfc_sli4_init_vpi(struct lpfc_vport *);
+inline void lpfc_sli4_eq_clr_intr(struct lpfc_queue *);
uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 02/13] lpfc: Rework sli4 doorbell infrastructure
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 03/13] lpfc: Add SLI-4 if_type=6 support to the code base James Smart
` (10 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Up until now, all SLI-4 devices had the same doorbells at the same
bar locations. With newer hardware, there are now independent EQ and
CQ doorbells and the bar locations differ.
Prepare the code for new hardwre by separating the eq/cq doorbell into
separate components. The components can be set based on if_type.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_debugfs.c | 20 ++++++++++++++------
drivers/scsi/lpfc/lpfc_debugfs.h | 11 ++++++-----
drivers/scsi/lpfc/lpfc_init.c | 9 ++++++---
drivers/scsi/lpfc/lpfc_sli.c | 8 ++++----
drivers/scsi/lpfc/lpfc_sli4.h | 3 ++-
5 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 17ea3bb04266..308303d501cf 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -3944,10 +3944,15 @@ lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
return 0;
switch (drbregid) {
- case LPFC_DRB_EQCQ:
- len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
- "EQCQ-DRB-REG: 0x%08x\n",
- readl(phba->sli4_hba.EQCQDBregaddr));
+ case LPFC_DRB_EQ:
+ len += snprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "EQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.EQDBregaddr));
+ break;
+ case LPFC_DRB_CQ:
+ len += snprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE - len,
+ "CQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.CQDBregaddr));
break;
case LPFC_DRB_MQ:
len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
@@ -4086,8 +4091,11 @@ lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
switch (drb_reg_id) {
- case LPFC_DRB_EQCQ:
- drb_reg = phba->sli4_hba.EQCQDBregaddr;
+ case LPFC_DRB_EQ:
+ drb_reg = phba->sli4_hba.EQDBregaddr;
+ break;
+ case LPFC_DRB_CQ:
+ drb_reg = phba->sli4_hba.CQDBregaddr;
break;
case LPFC_DRB_MQ:
drb_reg = phba->sli4_hba.MQDBregaddr;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index c4edd87bfc65..12fbf498a7ce 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -126,12 +126,13 @@
#define LPFC_DRB_ACC_WR_CMD_ARG 2
#define LPFC_DRB_ACC_BUF_SIZE 256
-#define LPFC_DRB_EQCQ 1
-#define LPFC_DRB_MQ 2
-#define LPFC_DRB_WQ 3
-#define LPFC_DRB_RQ 4
+#define LPFC_DRB_EQ 1
+#define LPFC_DRB_CQ 2
+#define LPFC_DRB_MQ 3
+#define LPFC_DRB_WQ 4
+#define LPFC_DRB_RQ 5
-#define LPFC_DRB_MAX 4
+#define LPFC_DRB_MAX 5
#define IDIAG_DRBACC_REGID_INDX 0
#define IDIAG_DRBACC_VALUE_INDX 1
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index fc26c4b58d6b..9a6ece7f7748 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7430,8 +7430,9 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
phba->sli4_hba.WQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p +
LPFC_ULP0_WQ_DOORBELL;
- phba->sli4_hba.EQCQDBregaddr =
+ phba->sli4_hba.CQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
phba->sli4_hba.MQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
phba->sli4_hba.BMBXregaddr =
@@ -7488,8 +7489,10 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE +
LPFC_ULP0_WQ_DOORBELL);
- phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
- vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.CQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE +
+ LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f91caae6489a..f4db7d486431 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -310,7 +310,7 @@ lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
}
/**
@@ -360,10 +360,10 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
/* PCI read to flush PCI pipeline on re-arming for INTx mode */
if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
- readl(q->phba->sli4_hba.EQCQDBregaddr);
+ readl(q->phba->sli4_hba.EQDBregaddr);
return released;
}
@@ -453,7 +453,7 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
(q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
- writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
return released;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 0c0cbe296fed..e2f06c92c4dd 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -569,7 +569,8 @@ struct lpfc_sli4_hba {
/* IF type 0, BAR 0 and if type 2, BAR 0 doorbell register memory map */
void __iomem *RQDBregaddr; /* RQ_DOORBELL register */
void __iomem *WQDBregaddr; /* WQ_DOORBELL register */
- void __iomem *EQCQDBregaddr; /* EQCQ_DOORBELL register */
+ void __iomem *CQDBregaddr; /* CQ_DOORBELL register */
+ void __iomem *EQDBregaddr; /* EQ_DOORBELL register */
void __iomem *MQDBregaddr; /* MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* BootStrap MBX register */
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 03/13] lpfc: Add SLI-4 if_type=6 support to the code base
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
2018-01-26 19:31 ` [PATCH 02/13] lpfc: Rework sli4 doorbell infrastructure James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 04/13] lpfc: Add push-to-adapter support to sli4 James Smart
` (9 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
New hardware supports a SLI-4 interface, but with a new if_type
variant of 6.
If_type=6 has a different PCI BAR map, separate EQ/CQ doorbells,
and some changes in doorbell formats.
Add the changes for the if_type into headers, adapter initialization
and control flows. Add new eq and cq handlers.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_bsg.c | 4 +-
drivers/scsi/lpfc/lpfc_hw4.h | 54 ++++++++++++++++++-
drivers/scsi/lpfc/lpfc_init.c | 120 +++++++++++++++++++++++++++++++++++-------
drivers/scsi/lpfc/lpfc_sli.c | 120 ++++++++++++++++++++++++++++++++++++++++--
drivers/scsi/lpfc/lpfc_sli4.h | 3 ++
5 files changed, 275 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index d89816222b23..8b33b652226b 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -3867,7 +3867,7 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
"ext_buf_cnt:%d\n", ext_buf_cnt);
} else {
/* sanity check on interface type for support */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2) {
rc = -ENODEV;
goto job_error;
@@ -4053,7 +4053,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
"ext_buf_cnt:%d\n", ext_buf_cnt);
} else {
/* sanity check on interface type for support */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
return -ENODEV;
/* nemb_tp == nemb_hbd */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 8685d26e6929..93fd9fd10a0f 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -84,6 +84,7 @@ struct lpfc_sli_intf {
#define LPFC_SLI_INTF_IF_TYPE_0 0
#define LPFC_SLI_INTF_IF_TYPE_1 1
#define LPFC_SLI_INTF_IF_TYPE_2 2
+#define LPFC_SLI_INTF_IF_TYPE_6 6
#define lpfc_sli_intf_sli_family_SHIFT 8
#define lpfc_sli_intf_sli_family_MASK 0x0000000F
#define lpfc_sli_intf_sli_family_WORD word0
@@ -731,11 +732,13 @@ struct lpfc_register {
* register sets depending on the UCNA Port's reported if_type
* value. For UCNA ports running SLI4 and if_type 0, they reside in
* BAR4. For UCNA ports running SLI4 and if_type 2, they reside in
- * BAR0. The offsets are the same so the driver must account for
- * any base address difference.
+ * BAR0. For FC ports running SLI4 and if_type 6, they reside in
+ * BAR2. The offsets and base address are different, so the driver
+ * has to compute the register addresses accordingly
*/
#define LPFC_ULP0_RQ_DOORBELL 0x00A0
#define LPFC_ULP1_RQ_DOORBELL 0x00C0
+#define LPFC_IF6_RQ_DOORBELL 0x0080
#define lpfc_rq_db_list_fm_num_posted_SHIFT 24
#define lpfc_rq_db_list_fm_num_posted_MASK 0x00FF
#define lpfc_rq_db_list_fm_num_posted_WORD word0
@@ -770,6 +773,20 @@ struct lpfc_register {
#define lpfc_wq_db_ring_fm_id_MASK 0xFFFF
#define lpfc_wq_db_ring_fm_id_WORD word0
+#define LPFC_IF6_WQ_DOORBELL 0x0040
+#define lpfc_if6_wq_db_list_fm_num_posted_SHIFT 24
+#define lpfc_if6_wq_db_list_fm_num_posted_MASK 0x00FF
+#define lpfc_if6_wq_db_list_fm_num_posted_WORD word0
+#define lpfc_if6_wq_db_list_fm_dpp_SHIFT 23
+#define lpfc_if6_wq_db_list_fm_dpp_MASK 0x0001
+#define lpfc_if6_wq_db_list_fm_dpp_WORD word0
+#define lpfc_if6_wq_db_list_fm_dpp_id_SHIFT 16
+#define lpfc_if6_wq_db_list_fm_dpp_id_MASK 0x001F
+#define lpfc_if6_wq_db_list_fm_dpp_id_WORD word0
+#define lpfc_if6_wq_db_list_fm_id_SHIFT 0
+#define lpfc_if6_wq_db_list_fm_id_MASK 0xFFFF
+#define lpfc_if6_wq_db_list_fm_id_WORD word0
+
#define LPFC_EQCQ_DOORBELL 0x0120
#define lpfc_eqcq_doorbell_se_SHIFT 31
#define lpfc_eqcq_doorbell_se_MASK 0x0001
@@ -805,6 +822,38 @@ struct lpfc_register {
#define LPFC_CQID_HI_FIELD_SHIFT 10
#define LPFC_EQID_HI_FIELD_SHIFT 9
+#define LPFC_IF6_CQ_DOORBELL 0x00C0
+#define lpfc_if6_cq_doorbell_se_SHIFT 31
+#define lpfc_if6_cq_doorbell_se_MASK 0x0001
+#define lpfc_if6_cq_doorbell_se_WORD word0
+#define LPFC_IF6_CQ_SOLICIT_ENABLE_OFF 0
+#define LPFC_IF6_CQ_SOLICIT_ENABLE_ON 1
+#define lpfc_if6_cq_doorbell_arm_SHIFT 29
+#define lpfc_if6_cq_doorbell_arm_MASK 0x0001
+#define lpfc_if6_cq_doorbell_arm_WORD word0
+#define lpfc_if6_cq_doorbell_num_released_SHIFT 16
+#define lpfc_if6_cq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_if6_cq_doorbell_num_released_WORD word0
+#define lpfc_if6_cq_doorbell_cqid_SHIFT 0
+#define lpfc_if6_cq_doorbell_cqid_MASK 0xFFFF
+#define lpfc_if6_cq_doorbell_cqid_WORD word0
+
+#define LPFC_IF6_EQ_DOORBELL 0x0120
+#define lpfc_if6_eq_doorbell_io_SHIFT 31
+#define lpfc_if6_eq_doorbell_io_MASK 0x0001
+#define lpfc_if6_eq_doorbell_io_WORD word0
+#define LPFC_IF6_EQ_INTR_OVERRIDE_OFF 0
+#define LPFC_IF6_EQ_INTR_OVERRIDE_ON 1
+#define lpfc_if6_eq_doorbell_arm_SHIFT 29
+#define lpfc_if6_eq_doorbell_arm_MASK 0x0001
+#define lpfc_if6_eq_doorbell_arm_WORD word0
+#define lpfc_if6_eq_doorbell_num_released_SHIFT 16
+#define lpfc_if6_eq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_if6_eq_doorbell_num_released_WORD word0
+#define lpfc_if6_eq_doorbell_eqid_SHIFT 0
+#define lpfc_if6_eq_doorbell_eqid_MASK 0x0FFF
+#define lpfc_if6_eq_doorbell_eqid_WORD word0
+
#define LPFC_BMBX 0x0160
#define lpfc_bmbx_addr_SHIFT 2
#define lpfc_bmbx_addr_MASK 0x3FFFFFFF
@@ -817,6 +866,7 @@ struct lpfc_register {
#define lpfc_bmbx_rdy_WORD word0
#define LPFC_MQ_DOORBELL 0x0140
+#define LPFC_IF6_MQ_DOORBELL 0x0160
#define lpfc_mq_doorbell_num_posted_SHIFT 16
#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
#define lpfc_mq_doorbell_num_posted_WORD word0
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 9a6ece7f7748..4e19a5c45fed 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1761,7 +1761,7 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
int rc;
uint32_t intr_mode;
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2) {
/*
* On error status condition, driver need to wait for port
@@ -1892,6 +1892,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
pci_rd_rc1 = lpfc_readl(
phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0);
@@ -6018,7 +6019,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
return -ENOMEM;
/* IF Type 2 ports get initialized now. */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2) {
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc)) {
@@ -7348,6 +7349,7 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
/* Final checks. The port status should be clean. */
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
®_data.word0) ||
@@ -7438,6 +7440,28 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
phba->sli4_hba.BMBXregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.u.if_type2.EQDregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_EQ_DELAY_OFFSET;
+ phba->sli4_hba.u.if_type2.ERR1regaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER1_OFFSET;
+ phba->sli4_hba.u.if_type2.ERR2regaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER2_OFFSET;
+ phba->sli4_hba.u.if_type2.CTRLregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_CTL_OFFSET;
+ phba->sli4_hba.u.if_type2.STATUSregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_STA_OFFSET;
+ phba->sli4_hba.PSMPHRregaddr =
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_SEM_OFFSET;
+ phba->sli4_hba.BMBXregaddr =
+ phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
+ break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
@@ -7451,20 +7475,43 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
* lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
- * memory map.
+ * This routine is invoked to set up SLI4 BAR1 register memory map.
**/
static void
-lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
{
- phba->sli4_hba.PSMPHRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_SLIPORT_IF0_SMPHR;
- phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_ISR0;
- phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_IMR0;
- phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
- LPFC_HST_ISCR0;
+ switch (if_type) {
+ case LPFC_SLI_INTF_IF_TYPE_0:
+ phba->sli4_hba.PSMPHRregaddr =
+ phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_SLIPORT_IF0_SMPHR;
+ phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISR0;
+ phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_IMR0;
+ phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISCR0;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.RQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_RQ_DOORBELL;
+ phba->sli4_hba.WQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_WQ_DOORBELL;
+ phba->sli4_hba.CQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_CQ_DOORBELL;
+ phba->sli4_hba.EQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_EQ_DOORBELL;
+ phba->sli4_hba.MQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
+ LPFC_IF6_MQ_DOORBELL;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_1:
+ default:
+ dev_err(&phba->pcidev->dev,
+ "FATAL - unsupported SLI4 interface type - %d\n",
+ if_type);
+ break;
+ }
}
/**
@@ -7729,7 +7776,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
/* Update link speed if forced link speed is supported */
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
forced_link_speed =
bf_get(lpfc_mbx_rd_conf_link_speed, rd_config);
if (forced_link_speed) {
@@ -7789,7 +7836,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->cfg_hba_queue_depth = length;
}
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
goto read_cfg_out;
@@ -7903,6 +7950,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
}
mempool_free(mboxq, phba->mbox_mem_pool);
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
case LPFC_SLI_INTF_IF_TYPE_2:
case LPFC_SLI_INTF_IF_TYPE_1:
default:
@@ -9314,6 +9362,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
wait:
/*
* Poll the Port Status Register and wait for RDY for
@@ -9469,7 +9518,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
} else {
phba->pci_bar0_map = pci_resource_start(pdev, 1);
bar0map_len = pci_resource_len(pdev, 1);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
dev_printk(KERN_ERR, &pdev->dev,
"FATAL - No BAR0 mapping for SLI4, if_type 2\n");
goto out;
@@ -9506,13 +9555,32 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
phba->pci_bar2_memmap_p =
phba->sli4_hba.ctrl_regs_memmap_p;
- lpfc_sli4_bar1_register_memmap(phba);
+ lpfc_sli4_bar1_register_memmap(phba, if_type);
} else {
error = -ENOMEM;
goto out_iounmap_conf;
}
}
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
+ (pci_resource_start(pdev, PCI_64BIT_BAR2))) {
+ /*
+ * Map SLI4 if type 6 HBA Doorbell Register base to a kernel
+ * virtual address and setup the registers.
+ */
+ phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2);
+ bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
+ phba->sli4_hba.drbl_regs_memmap_p =
+ ioremap(phba->pci_bar1_map, bar1map_len);
+ if (!phba->sli4_hba.drbl_regs_memmap_p) {
+ dev_err(&pdev->dev,
+ "ioremap failed for SLI4 HBA doorbell registers.\n");
+ goto out_iounmap_conf;
+ }
+ phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
+ lpfc_sli4_bar1_register_memmap(phba, if_type);
+ }
+
if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
if (pci_resource_start(pdev, PCI_64BIT_BAR4)) {
/*
@@ -9544,10 +9612,20 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
/* Set up the EQ/CQ register handeling functions now */
- if (if_type <= LPFC_SLI_INTF_IF_TYPE_2) {
+ switch (if_type) {
+ case LPFC_SLI_INTF_IF_TYPE_0:
+ case LPFC_SLI_INTF_IF_TYPE_2:
phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr;
phba->sli4_hba.sli4_eq_release = lpfc_sli4_eq_release;
phba->sli4_hba.sli4_cq_release = lpfc_sli4_cq_release;
+ break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_if6_eq_clr_intr;
+ phba->sli4_hba.sli4_eq_release = lpfc_sli4_if6_eq_release;
+ phba->sli4_hba.sli4_cq_release = lpfc_sli4_if6_cq_release;
+ break;
+ default:
+ break;
}
return 0;
@@ -9584,6 +9662,10 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
case LPFC_SLI_INTF_IF_TYPE_2:
iounmap(phba->sli4_hba.conf_regs_memmap_p);
break;
+ case LPFC_SLI_INTF_IF_TYPE_6:
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+ break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
@@ -11288,7 +11370,7 @@ lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
const struct firmware *fw;
/* Only supported on SLI4 interface type 2 for now */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2)
return -EPERM;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f4db7d486431..3bff1f9c5df7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -314,6 +314,25 @@ lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
}
/**
+ * lpfc_sli4_if6_eq_clr_intr - Turn off interrupts from this EQ
+ * @q: The Event Queue to disable interrupts
+ *
+ **/
+inline void
+lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q)
+{
+ struct lpfc_register doorbell;
+
+ doorbell.word0 = 0;
+ bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+ bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+ (q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+}
+
+/**
* lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
* @q: The Event Queue that the host has completed processing for.
* @arm: Indicates whether the host wants to arms this CQ.
@@ -368,6 +387,55 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
}
/**
+ * lpfc_sli4_if6_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_eqe *temp_eqe;
+ struct lpfc_register doorbell;
+
+ /* sanity check on queue memory */
+ if (unlikely(!q))
+ return 0;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_if6_eq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_if6_eq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_if6_eq_doorbell_eqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+ /* PCI read to flush PCI pipeline on re-arming for INTx mode */
+ if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+ readl(q->phba->sli4_hba.EQDBregaddr);
+ return released;
+}
+
+/**
* lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
* @q: The Completion Queue to get the first valid CQE from
*
@@ -458,6 +526,51 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
}
/**
+ * lpfc_sli4_if6_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_if6_cq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_cqe *temp_qe;
+ struct lpfc_register doorbell;
+
+ /* sanity check on queue memory */
+ if (unlikely(!q))
+ return 0;
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_if6_cq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_if6_cq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_if6_cq_doorbell_cqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
+ return released;
+}
+
+/**
* lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
* @q: The Header Receive Queue to operate on.
* @wqe: The Receive Queue Entry to put on the Receive queue.
@@ -2331,7 +2444,7 @@ lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
if (pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) {
if (phba->sli_rev == LPFC_SLI_REV4 &&
(bf_get(lpfc_sli_intf_if_type,
- &phba->sli4_hba.sli_intf) ==
+ &phba->sli4_hba.sli_intf) >=
LPFC_SLI_INTF_IF_TYPE_2)) {
if (ndlp) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
@@ -8792,7 +8905,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
iocbq->context2)->virt);
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
*pcmd == ELS_CMD_FDISC ||
@@ -9089,7 +9202,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
if (iocbq->vport->fc_flag & FC_PT2PT) {
bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
@@ -11673,6 +11786,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
+ case LPFC_SLI_INTF_IF_TYPE_6:
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0) ||
lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index e2f06c92c4dd..33838b4b28d9 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -856,6 +856,9 @@ int lpfc_sli4_init_vpi(struct lpfc_vport *);
inline void lpfc_sli4_eq_clr_intr(struct lpfc_queue *);
uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+inline void lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q);
+uint32_t lpfc_sli4_if6_cq_release(struct lpfc_queue *q, bool arm);
+uint32_t lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm);
void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
int lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *, uint16_t);
int lpfc_sli4_fcf_rr_read_fcf_rec(struct lpfc_hba *, uint16_t);
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 04/13] lpfc: Add push-to-adapter support to sli4
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (2 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 03/13] lpfc: Add SLI-4 if_type=6 support to the code base James Smart
@ 2018-01-26 19:31 ` James Smart
2018-02-07 0:27 ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 05/13] lpfc: Add PCI Ids for if_type=6 hardware James Smart
` (8 subsequent siblings)
12 siblings, 1 reply; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
New if_type=6 adapters support and additional BAR that provides
apertures to allow direct WQE to adapter push support - termed
Direct Packet Push (DPP). WQ creation differs slightly to ask for
a WQ to be DPP-ized. When submitting a WQE to a DPP WQ, it is
submitted to the host memory for the WQ normally, but is also
written by the host cpu directly to a BAR aperture. Write buffer
coalescing in hardware is (hopefully) turned on, enabling single
pci write operation support. The doorbell is thing rung to indicate
the WQE is available and was pushed to the aperture.
This patch:
- Updates the WQ Create commands for the DPP options
- Adds the bar mapping for if_type=6 DPP bar
- Adds the WQE pushing to the DDP aperture received from WQ create
- Adds a new module parameter to disable DPP operation if desired.
Default is enabled.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc.h | 3 +-
drivers/scsi/lpfc/lpfc_attr.c | 10 ++
drivers/scsi/lpfc/lpfc_hw4.h | 31 ++++++
drivers/scsi/lpfc/lpfc_init.c | 18 ++++
drivers/scsi/lpfc/lpfc_sli.c | 234 +++++++++++++++++++++++++++---------------
drivers/scsi/lpfc/lpfc_sli4.h | 16 ++-
6 files changed, 225 insertions(+), 87 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9698b9635058..86ffb9756e65 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -840,7 +840,8 @@ struct lpfc_hba {
uint32_t cfg_enable_SmartSAN;
uint32_t cfg_enable_mds_diags;
uint32_t cfg_enable_fc4_type;
- uint32_t cfg_enable_bbcr; /*Enable BB Credit Recovery*/
+ uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
+ uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
uint32_t cfg_xri_split;
#define LPFC_ENABLE_FCP 1
#define LPFC_ENABLE_NVME 2
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 70bd25666243..705c42e724c2 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5204,6 +5204,14 @@ LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
*/
LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
+/*
+ * lpfc_enable_dpp: Enable DPP on G7
+ * 0 = DPP on G7 disabled
+ * 1 = DPP on G7 enabled (default)
+ * Value range is [0,1]. Default value is 1.
+ */
+LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
+
struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_nvme_info,
&dev_attr_bg_info,
@@ -5312,6 +5320,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_xlane_supported,
&dev_attr_lpfc_enable_mds_diags,
&dev_attr_lpfc_enable_bbcr,
+ &dev_attr_lpfc_enable_dpp,
NULL,
};
@@ -6324,6 +6333,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel);
lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
+ lpfc_enable_dpp_init(phba, lpfc_enable_dpp);
if (phba->sli_rev != LPFC_SLI_REV4) {
/* NVME only supported on SLI4 */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 93fd9fd10a0f..60ccff6fa8b0 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1372,6 +1372,15 @@ struct lpfc_mbx_wq_create {
#define lpfc_mbx_wq_create_page_size_MASK 0x000000FF
#define lpfc_mbx_wq_create_page_size_WORD word1
#define LPFC_WQ_PAGE_SIZE_4096 0x1
+#define lpfc_mbx_wq_create_dpp_req_SHIFT 15
+#define lpfc_mbx_wq_create_dpp_req_MASK 0x00000001
+#define lpfc_mbx_wq_create_dpp_req_WORD word1
+#define lpfc_mbx_wq_create_doe_SHIFT 14
+#define lpfc_mbx_wq_create_doe_MASK 0x00000001
+#define lpfc_mbx_wq_create_doe_WORD word1
+#define lpfc_mbx_wq_create_toe_SHIFT 13
+#define lpfc_mbx_wq_create_toe_MASK 0x00000001
+#define lpfc_mbx_wq_create_toe_WORD word1
#define lpfc_mbx_wq_create_wqe_size_SHIFT 8
#define lpfc_mbx_wq_create_wqe_size_MASK 0x0000000F
#define lpfc_mbx_wq_create_wqe_size_WORD word1
@@ -1400,6 +1409,28 @@ struct lpfc_mbx_wq_create {
#define lpfc_mbx_wq_create_db_format_MASK 0x0000FFFF
#define lpfc_mbx_wq_create_db_format_WORD word2
} response;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_dpp_rsp_SHIFT 31
+#define lpfc_mbx_wq_create_dpp_rsp_MASK 0x00000001
+#define lpfc_mbx_wq_create_dpp_rsp_WORD word0
+#define lpfc_mbx_wq_create_v1_q_id_SHIFT 0
+#define lpfc_mbx_wq_create_v1_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_v1_q_id_WORD word0
+ uint32_t word1;
+#define lpfc_mbx_wq_create_v1_bar_set_SHIFT 0
+#define lpfc_mbx_wq_create_v1_bar_set_MASK 0x0000000F
+#define lpfc_mbx_wq_create_v1_bar_set_WORD word1
+ uint32_t doorbell_offset;
+ uint32_t word3;
+#define lpfc_mbx_wq_create_dpp_id_SHIFT 16
+#define lpfc_mbx_wq_create_dpp_id_MASK 0x0000001F
+#define lpfc_mbx_wq_create_dpp_id_WORD word3
+#define lpfc_mbx_wq_create_dpp_bar_SHIFT 0
+#define lpfc_mbx_wq_create_dpp_bar_MASK 0x0000000F
+#define lpfc_mbx_wq_create_dpp_bar_WORD word3
+ uint32_t dpp_offset;
+ } response_1;
} u;
};
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 4e19a5c45fed..0b8381876ed8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9611,6 +9611,24 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
}
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
+ (pci_resource_start(pdev, PCI_64BIT_BAR4))) {
+ /*
+ * Map SLI4 if type 6 HBA DPP Register base to a kernel
+ * virtual address and setup the registers.
+ */
+ phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
+ bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
+ phba->sli4_hba.dpp_regs_memmap_p =
+ ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->sli4_hba.dpp_regs_memmap_p) {
+ dev_err(&pdev->dev,
+ "ioremap failed for SLI4 HBA dpp registers.\n");
+ goto out_iounmap_ctrl;
+ }
+ phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
+ }
+
/* Set up the EQ/CQ register handeling functions now */
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3bff1f9c5df7..1b07e61fb7bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -35,6 +35,9 @@
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
#include <linux/aer.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include <linux/nvme-fc-driver.h>
@@ -112,6 +115,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
struct lpfc_register doorbell;
uint32_t host_index;
uint32_t idx;
+ uint32_t i = 0;
+ uint8_t *tmp;
/* sanity check on queue memory */
if (unlikely(!q))
@@ -133,7 +138,18 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
- /* ensure WQE bcopy flushed before doorbell write */
+ if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+ /* write to DPP aperture taking advatage of Combined Writes */
+ tmp = (uint8_t *)wqe;
+#ifdef CONFIG_64BIT
+ for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
+ writeq(*((uint64_t *)(tmp + i)), q->dpp_regaddr + i);
+#else
+ for (i = 0; i < q->entry_size; i += sizeof(uint32_t))
+ writel(*((uint32_t *)(tmp + i)), q->dpp_regaddr + i);
+#endif
+ }
+ /* ensure WQE bcopy and DPP flushed before doorbell write */
wmb();
/* Update the host index before invoking device */
@@ -144,9 +160,18 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
/* Ring Doorbell */
doorbell.word0 = 0;
if (q->db_format == LPFC_DB_LIST_FORMAT) {
- bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
- bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
- bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+ if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+ bf_set(lpfc_if6_wq_db_list_fm_num_posted, &doorbell, 1);
+ bf_set(lpfc_if6_wq_db_list_fm_dpp, &doorbell, 1);
+ bf_set(lpfc_if6_wq_db_list_fm_dpp_id, &doorbell,
+ q->dpp_id);
+ bf_set(lpfc_if6_wq_db_list_fm_id, &doorbell,
+ q->queue_id);
+ } else {
+ bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
+ bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
+ bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+ }
} else if (q->db_format == LPFC_DB_RING_FORMAT) {
bf_set(lpfc_wq_db_ring_fm_num_posted, &doorbell, 1);
bf_set(lpfc_wq_db_ring_fm_id, &doorbell, q->queue_id);
@@ -15023,6 +15048,9 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
void __iomem *bar_memmap_p;
uint32_t db_offset;
uint16_t pci_barset;
+ uint8_t dpp_barset;
+ uint32_t dpp_offset;
+ unsigned long pg_addr;
uint8_t wq_create_version;
/* sanity check on queue memory */
@@ -15056,38 +15084,13 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
else
wq_create_version = LPFC_Q_CREATE_VERSION_0;
- switch (wq_create_version) {
- case LPFC_Q_CREATE_VERSION_0:
- switch (wq->entry_size) {
- default:
- case 64:
- /* Nothing to do, version 0 ONLY supports 64 byte */
- page = wq_create->u.request.page;
- break;
- case 128:
- if (!(phba->sli4_hba.pc_sli4_params.wqsize &
- LPFC_WQ_SZ128_SUPPORT)) {
- status = -ERANGE;
- goto out;
- }
- /* If we get here the HBA MUST also support V1 and
- * we MUST use it
- */
- bf_set(lpfc_mbox_hdr_version, &shdr->request,
- LPFC_Q_CREATE_VERSION_1);
- bf_set(lpfc_mbx_wq_create_wqe_count,
- &wq_create->u.request_1, wq->entry_count);
- bf_set(lpfc_mbx_wq_create_wqe_size,
- &wq_create->u.request_1,
- LPFC_WQ_WQE_SIZE_128);
- bf_set(lpfc_mbx_wq_create_page_size,
- &wq_create->u.request_1,
- LPFC_WQ_PAGE_SIZE_4096);
- page = wq_create->u.request_1.page;
- break;
- }
- break;
+ if (phba->sli4_hba.pc_sli4_params.wqsize & LPFC_WQ_SZ128_SUPPORT)
+ wq_create_version = LPFC_Q_CREATE_VERSION_1;
+ else
+ wq_create_version = LPFC_Q_CREATE_VERSION_0;
+
+ switch (wq_create_version) {
case LPFC_Q_CREATE_VERSION_1:
bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
wq->entry_count);
@@ -15102,24 +15105,21 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
LPFC_WQ_WQE_SIZE_64);
break;
case 128:
- if (!(phba->sli4_hba.pc_sli4_params.wqsize &
- LPFC_WQ_SZ128_SUPPORT)) {
- status = -ERANGE;
- goto out;
- }
bf_set(lpfc_mbx_wq_create_wqe_size,
&wq_create->u.request_1,
LPFC_WQ_WQE_SIZE_128);
break;
}
+ /* Request DPP by default */
+ bf_set(lpfc_mbx_wq_create_dpp_req, &wq_create->u.request_1, 1);
bf_set(lpfc_mbx_wq_create_page_size,
&wq_create->u.request_1,
(wq->page_size / SLI4_PAGE_SIZE));
page = wq_create->u.request_1.page;
break;
default:
- status = -ERANGE;
- goto out;
+ page = wq_create->u.request.page;
+ break;
}
list_for_each_entry(dmabuf, &wq->page_list, list) {
@@ -15143,52 +15143,120 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
status = -ENXIO;
goto out;
}
- wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+
+ if (wq_create_version == LPFC_Q_CREATE_VERSION_0)
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id,
+ &wq_create->u.response);
+ else
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_v1_q_id,
+ &wq_create->u.response_1);
+
if (wq->queue_id == 0xFFFF) {
status = -ENXIO;
goto out;
}
- if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
- wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
- &wq_create->u.response);
- if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
- (wq->db_format != LPFC_DB_RING_FORMAT)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3265 WQ[%d] doorbell format not "
- "supported: x%x\n", wq->queue_id,
- wq->db_format);
- status = -EINVAL;
- goto out;
- }
- pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
- &wq_create->u.response);
- bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba, pci_barset);
- if (!bar_memmap_p) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3263 WQ[%d] failed to memmap pci "
- "barset:x%x\n", wq->queue_id,
- pci_barset);
- status = -ENOMEM;
- goto out;
- }
- db_offset = wq_create->u.response.doorbell_offset;
- if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
- (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3252 WQ[%d] doorbell offset not "
- "supported: x%x\n", wq->queue_id,
- db_offset);
- status = -EINVAL;
- goto out;
- }
- wq->db_regaddr = bar_memmap_p + db_offset;
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "3264 WQ[%d]: barset:x%x, offset:x%x, "
- "format:x%x\n", wq->queue_id, pci_barset,
- db_offset, wq->db_format);
+
+ wq->db_format = LPFC_DB_LIST_FORMAT;
+ if (wq_create_version == LPFC_Q_CREATE_VERSION_0) {
+ if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
+ wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
+ &wq_create->u.response);
+ if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
+ (wq->db_format != LPFC_DB_RING_FORMAT)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3265 WQ[%d] doorbell format "
+ "not supported: x%x\n",
+ wq->queue_id, wq->db_format);
+ status = -EINVAL;
+ goto out;
+ }
+ pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
+ &wq_create->u.response);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ pci_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3263 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, pci_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ db_offset = wq_create->u.response.doorbell_offset;
+ if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
+ (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3252 WQ[%d] doorbell offset "
+ "not supported: x%x\n",
+ wq->queue_id, db_offset);
+ status = -EINVAL;
+ goto out;
+ }
+ wq->db_regaddr = bar_memmap_p + db_offset;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3264 WQ[%d]: barset:x%x, offset:x%x, "
+ "format:x%x\n", wq->queue_id,
+ pci_barset, db_offset, wq->db_format);
+ } else
+ wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
} else {
- wq->db_format = LPFC_DB_LIST_FORMAT;
- wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
+ /* Check if DPP was honored by the firmware */
+ wq->dpp_enable = bf_get(lpfc_mbx_wq_create_dpp_rsp,
+ &wq_create->u.response_1);
+ if (wq->dpp_enable) {
+ pci_barset = bf_get(lpfc_mbx_wq_create_v1_bar_set,
+ &wq_create->u.response_1);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ pci_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3267 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, pci_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ db_offset = wq_create->u.response_1.doorbell_offset;
+ wq->db_regaddr = bar_memmap_p + db_offset;
+ wq->dpp_id = bf_get(lpfc_mbx_wq_create_dpp_id,
+ &wq_create->u.response_1);
+ dpp_barset = bf_get(lpfc_mbx_wq_create_dpp_bar,
+ &wq_create->u.response_1);
+ bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+ dpp_barset);
+ if (!bar_memmap_p) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3268 WQ[%d] failed to memmap "
+ "pci barset:x%x\n",
+ wq->queue_id, dpp_barset);
+ status = -ENOMEM;
+ goto out;
+ }
+ dpp_offset = wq_create->u.response_1.dpp_offset;
+ wq->dpp_regaddr = bar_memmap_p + dpp_offset;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3271 WQ[%d]: barset:x%x, offset:x%x, "
+ "dpp_id:x%x dpp_barset:x%x "
+ "dpp_offset:x%x\n",
+ wq->queue_id, pci_barset, db_offset,
+ wq->dpp_id, dpp_barset, dpp_offset);
+
+ /* Enable combined writes for DPP aperture */
+ pg_addr = (unsigned long)(wq->dpp_regaddr) & PAGE_MASK;
+#ifdef CONFIG_X86
+ rc = set_memory_wc(pg_addr, 1);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3272 Cannot setup Combined "
+ "Write on WQ[%d] - disable DPP\n",
+ wq->queue_id);
+ phba->cfg_enable_dpp = 0;
+ }
+#else
+ phba->cfg_enable_dpp = 0;
+#endif
+ } else
+ wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
}
wq->pring = kzalloc(sizeof(struct lpfc_sli_ring), GFP_KERNEL);
if (wq->pring == NULL) {
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 33838b4b28d9..708167b309bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -180,6 +180,10 @@ struct lpfc_queue {
uint8_t q_flag;
#define HBA_NVMET_WQFULL 0x1 /* We hit WQ Full condition for NVMET */
void __iomem *db_regaddr;
+ uint16_t dpp_enable;
+ uint16_t dpp_id;
+ void __iomem *dpp_regaddr;
+
/* For q stats */
uint32_t q_cnt_1;
uint32_t q_cnt_2;
@@ -524,11 +528,17 @@ struct lpfc_vector_map_info {
/* SLI4 HBA data structure entries */
struct lpfc_sli4_hba {
void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR0, config space registers */
+ * config space registers
+ */
void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR1, control registers */
+ * control registers
+ */
void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
- PCI BAR2, doorbell registers */
+ * doorbell registers
+ */
+ void __iomem *dpp_regs_memmap_p; /* Kernel memory mapped address for
+ * dpp registers
+ */
union {
struct {
/* IF Type 0, BAR 0 PCI cfg space reg mem map */
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 05/13] lpfc: Add PCI Ids for if_type=6 hardware
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (3 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 04/13] lpfc: Add push-to-adapter support to sli4 James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 06/13] lpfc: Add 64G link speed support James Smart
` (7 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Add PCI ids for the new G7 adapter
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_hw.h | 1 +
drivers/scsi/lpfc/lpfc_ids.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index bdc1f184f67a..d07d2fcbea34 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1580,6 +1580,7 @@ struct lpfc_fdmi_reg_portattr {
#define PCI_DEVICE_ID_LANCER_FCOE 0xe260
#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268
#define PCI_DEVICE_ID_LANCER_G6_FC 0xe300
+#define PCI_DEVICE_ID_LANCER_G7_FC 0xf400
#define PCI_DEVICE_ID_SAT_SMB 0xf011
#define PCI_DEVICE_ID_SAT_MID 0xf015
#define PCI_DEVICE_ID_RFLY 0xf095
diff --git a/drivers/scsi/lpfc/lpfc_ids.h b/drivers/scsi/lpfc/lpfc_ids.h
index 0ba3733eb36d..329c8d28869c 100644
--- a/drivers/scsi/lpfc/lpfc_ids.h
+++ b/drivers/scsi/lpfc/lpfc_ids.h
@@ -116,6 +116,8 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G6_FC,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G7_FC,
+ PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK_VF,
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 06/13] lpfc: Add 64G link speed support
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (4 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 05/13] lpfc: Add PCI Ids for if_type=6 hardware James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-29 11:45 ` Steffen Maier
2018-01-26 19:31 ` [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits James Smart
` (6 subsequent siblings)
12 siblings, 1 reply; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
The G7 adapter supports 64G link speeds. Add support to the driver.
In addition, a small cleanup to replace the odd bitmap logic with
a switch case.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc.h | 14 +++------
drivers/scsi/lpfc/lpfc_attr.c | 61 ++++++++++++++++++++++++++++------------
drivers/scsi/lpfc/lpfc_ct.c | 5 ++++
drivers/scsi/lpfc/lpfc_els.c | 5 ++++
drivers/scsi/lpfc/lpfc_hbadisc.c | 1 +
drivers/scsi/lpfc/lpfc_hw.h | 12 ++++++++
drivers/scsi/lpfc/lpfc_hw4.h | 3 ++
drivers/scsi/lpfc/lpfc_init.c | 17 +++++++++--
drivers/scsi/lpfc/lpfc_mbox.c | 4 +++
9 files changed, 92 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 86ffb9756e65..7aad4a717f13 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -544,16 +544,10 @@ struct unsol_rcv_ct_ctx {
#define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
#define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
#define LPFC_USER_LINK_SPEED_32G 32 /* 32 Gigabaud */
-#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_32G
-#define LPFC_USER_LINK_SPEED_BITMAP ((1ULL << LPFC_USER_LINK_SPEED_32G) | \
- (1 << LPFC_USER_LINK_SPEED_16G) | \
- (1 << LPFC_USER_LINK_SPEED_10G) | \
- (1 << LPFC_USER_LINK_SPEED_8G) | \
- (1 << LPFC_USER_LINK_SPEED_4G) | \
- (1 << LPFC_USER_LINK_SPEED_2G) | \
- (1 << LPFC_USER_LINK_SPEED_1G) | \
- (1 << LPFC_USER_LINK_SPEED_AUTO))
-#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32"
+#define LPFC_USER_LINK_SPEED_64G 64 /* 64 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_64G
+
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
enum nemb_type {
nemb_mse = 1,
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 705c42e724c2..ec080de4e7a7 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4126,23 +4126,32 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) ||
- ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb))) {
+ ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2879 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported by this port.\n",
val);
return -EINVAL;
}
- if (val == LPFC_USER_LINK_SPEED_16G &&
- phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+ if (val >= LPFC_USER_LINK_SPEED_16G &&
+ phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3112 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported in loop mode.\n",
val);
return -EINVAL;
}
- if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
- (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
+
+ switch (val) {
+ case LPFC_USER_LINK_SPEED_AUTO:
+ case LPFC_USER_LINK_SPEED_1G:
+ case LPFC_USER_LINK_SPEED_2G:
+ case LPFC_USER_LINK_SPEED_4G:
+ case LPFC_USER_LINK_SPEED_8G:
+ case LPFC_USER_LINK_SPEED_16G:
+ case LPFC_USER_LINK_SPEED_32G:
+ case LPFC_USER_LINK_SPEED_64G:
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
if (nolip)
@@ -4152,13 +4161,17 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
if (err) {
phba->cfg_link_speed = prev_val;
return -EINVAL;
- } else
- return strlen(buf);
+ }
+ return strlen(buf);
+ default:
+ break;
}
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0469 lpfc_link_speed attribute cannot be set to %d, "
- "allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val);
+ "0469 lpfc_link_speed attribute cannot be set to %d, "
+ "allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val);
return -EINVAL;
+
}
static int lpfc_link_speed = 0;
@@ -4185,24 +4198,33 @@ lpfc_param_show(link_speed)
static int
lpfc_link_speed_init(struct lpfc_hba *phba, int val)
{
- if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
+ if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3111 lpfc_link_speed of %d cannot "
"support loop mode, setting topology to default.\n",
val);
phba->cfg_topology = 0;
}
- if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
- (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
+
+ switch (val) {
+ case LPFC_USER_LINK_SPEED_AUTO:
+ case LPFC_USER_LINK_SPEED_1G:
+ case LPFC_USER_LINK_SPEED_2G:
+ case LPFC_USER_LINK_SPEED_4G:
+ case LPFC_USER_LINK_SPEED_8G:
+ case LPFC_USER_LINK_SPEED_16G:
+ case LPFC_USER_LINK_SPEED_32G:
+ case LPFC_USER_LINK_SPEED_64G:
phba->cfg_link_speed = val;
return 0;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0405 lpfc_link_speed attribute cannot "
+ "be set to %d, allowed values are "
+ "["LPFC_LINK_SPEED_STRING"]\n", val);
+ phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
+ return -EINVAL;
}
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0405 lpfc_link_speed attribute cannot "
- "be set to %d, allowed values are "
- "["LPFC_LINK_SPEED_STRING"]\n", val);
- phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
- return -EINVAL;
}
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
@@ -5734,6 +5756,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
case LPFC_LINK_SPEED_32GHZ:
fc_host_speed(shost) = FC_PORTSPEED_32GBIT;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_64GBIT;
+ break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 9d20d2c208c7..03a7e13a049d 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -2130,6 +2130,8 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
ae->un.AttrInt = 0;
if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ if (phba->lmt & LMT_64Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_64GFC;
if (phba->lmt & LMT_32Gb)
ae->un.AttrInt |= HBA_PORTSPEED_32GFC;
if (phba->lmt & LMT_16Gb)
@@ -2201,6 +2203,9 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
case LPFC_LINK_SPEED_32GHZ:
ae->un.AttrInt = HBA_PORTSPEED_32GFC;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_64GFC;
+ break;
default:
ae->un.AttrInt = HBA_PORTSPEED_UNKNOWN;
break;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ba896554a14f..09e4eb9fbc69 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5270,6 +5270,9 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
case LPFC_LINK_SPEED_32GHZ:
rdp_speed = RDP_PS_32GB;
break;
+ case LPFC_LINK_SPEED_64GHZ:
+ rdp_speed = RDP_PS_64GB;
+ break;
default:
rdp_speed = RDP_PS_UNKNOWN;
break;
@@ -5277,6 +5280,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
desc->info.port_speed.speed = cpu_to_be16(rdp_speed);
+ if (phba->lmt & LMT_64Gb)
+ rdp_cap |= RDP_PS_64GB;
if (phba->lmt & LMT_32Gb)
rdp_cap |= RDP_PS_32GB;
if (phba->lmt & LMT_16Gb)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index f5bbac3cadbb..7855afa13568 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -3084,6 +3084,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
case LPFC_LINK_SPEED_10GHZ:
case LPFC_LINK_SPEED_16GHZ:
case LPFC_LINK_SPEED_32GHZ:
+ case LPFC_LINK_SPEED_64GHZ:
break;
default:
phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index d07d2fcbea34..b91b429fe2df 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1177,6 +1177,9 @@ struct fc_rdp_link_error_status_desc {
#define RDP_PS_8GB 0x0800
#define RDP_PS_16GB 0x0400
#define RDP_PS_32GB 0x0200
+#define RDP_PS_64GB 0x0100
+#define RDP_PS_128GB 0x0080
+#define RDP_PS_256GB 0x0040
#define RDP_CAP_USER_CONFIGURED 0x0002
#define RDP_CAP_UNKNOWN 0x0001
@@ -2258,6 +2261,9 @@ typedef struct {
#define LINK_SPEED_10G 0x10 /* 10 Gigabaud */
#define LINK_SPEED_16G 0x11 /* 16 Gigabaud */
#define LINK_SPEED_32G 0x14 /* 32 Gigabaud */
+#define LINK_SPEED_64G 0x17 /* 64 Gigabaud */
+#define LINK_SPEED_128G 0x1A /* 128 Gigabaud */
+#define LINK_SPEED_256G 0x1D /* 256 Gigabaud */
} INIT_LINK_VAR;
@@ -2442,6 +2448,9 @@ typedef struct {
#define LMT_10Gb 0x100
#define LMT_16Gb 0x200
#define LMT_32Gb 0x400
+#define LMT_64Gb 0x800
+#define LMT_128Gb 0x1000
+#define LMT_256Gb 0x2000
uint32_t rsvd2;
uint32_t rsvd3;
uint32_t max_xri;
@@ -2966,6 +2975,9 @@ struct lpfc_mbx_read_top {
#define LPFC_LINK_SPEED_10GHZ 0x40
#define LPFC_LINK_SPEED_16GHZ 0x80
#define LPFC_LINK_SPEED_32GHZ 0x90
+#define LPFC_LINK_SPEED_64GHZ 0xA0
+#define LPFC_LINK_SPEED_128GHZ 0xB0
+#define LPFC_LINK_SPEED_2568GHZ 0xC0
};
/* Structure for MB Command CLEAR_LA (22) */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 60ccff6fa8b0..0c33510fe75c 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3961,6 +3961,9 @@ struct lpfc_acqe_fc_la {
#define LPFC_FC_LA_SPEED_10G 0xA
#define LPFC_FC_LA_SPEED_16G 0x10
#define LPFC_FC_LA_SPEED_32G 0x20
+#define LPFC_FC_LA_SPEED_64G 0x21
+#define LPFC_FC_LA_SPEED_128G 0x22
+#define LPFC_FC_LA_SPEED_256G 0x23
#define lpfc_acqe_fc_la_topology_SHIFT 16
#define lpfc_acqe_fc_la_topology_MASK 0x000000FF
#define lpfc_acqe_fc_la_topology_WORD word0
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b8381876ed8..c38d57353edf 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -731,7 +731,9 @@ lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) &&
!(phba->lmt & LMT_16Gb)) ||
((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) &&
- !(phba->lmt & LMT_32Gb))) {
+ !(phba->lmt & LMT_32Gb)) ||
+ ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_64G) &&
+ !(phba->lmt & LMT_64Gb))) {
/* Reset link speed to auto */
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1302 Invalid speed for this board:%d "
@@ -2274,7 +2276,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
&& descp && descp[0] != '\0')
return;
- if (phba->lmt & LMT_32Gb)
+ if (phba->lmt & LMT_64Gb)
+ max_speed = 64;
+ else if (phba->lmt & LMT_32Gb)
max_speed = 32;
else if (phba->lmt & LMT_16Gb)
max_speed = 16;
@@ -4109,6 +4113,8 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
sizeof fc_host_symbolic_name(shost));
fc_host_supported_speeds(shost) = 0;
+ if (phba->lmt & LMT_64Gb)
+ fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT;
if (phba->lmt & LMT_32Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT;
if (phba->lmt & LMT_16Gb)
@@ -4445,6 +4451,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
case LPFC_FC_LA_SPEED_32G:
port_speed = 32000;
break;
+ case LPFC_FC_LA_SPEED_64G:
+ port_speed = 64000;
+ break;
default:
port_speed = 0;
}
@@ -7811,6 +7820,10 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->cfg_link_speed =
LPFC_USER_LINK_SPEED_32G;
break;
+ case LINK_SPEED_64G:
+ phba->cfg_link_speed =
+ LPFC_USER_LINK_SPEED_64G;
+ break;
case 0xffff:
phba->cfg_link_speed =
LPFC_USER_LINK_SPEED_AUTO;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 7313ceb0f23b..47c02da11f01 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -557,6 +557,10 @@ lpfc_init_link(struct lpfc_hba * phba,
mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
mb->un.varInitLnk.link_speed = LINK_SPEED_32G;
break;
+ case LPFC_USER_LINK_SPEED_64G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_64G;
+ break;
case LPFC_USER_LINK_SPEED_AUTO:
default:
mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (5 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 06/13] lpfc: Add 64G link speed support James Smart
@ 2018-01-26 19:31 ` James Smart
2018-02-07 0:28 ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 08/13] lpfc: Enable fw download on if_type=6 devices James Smart
` (5 subsequent siblings)
12 siblings, 1 reply; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Traditional SLI4 required the driver to clear Valid bits on
EQEs and CQEs after consuming them.
The new if_type=6 hardware will cycle the value for what is
valid on each queue itteration. The driver no longer has to
touch the valid bits. This also means all the cpu cache
dirtying and perhaps flush/refill's done by the hardware
in accessng the EQ/CQ elements is eliminated.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_hw4.h | 18 ++++++++--
drivers/scsi/lpfc/lpfc_init.c | 11 +++++++
drivers/scsi/lpfc/lpfc_sli.c | 77 +++++++++++++++++++++++++++++++++++--------
drivers/scsi/lpfc/lpfc_sli4.h | 3 ++
4 files changed, 92 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 0c33510fe75c..dba724e1f5ee 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1040,6 +1040,9 @@ struct eq_context {
#define lpfc_eq_context_valid_SHIFT 29
#define lpfc_eq_context_valid_MASK 0x00000001
#define lpfc_eq_context_valid_WORD word0
+#define lpfc_eq_context_autovalid_SHIFT 28
+#define lpfc_eq_context_autovalid_MASK 0x00000001
+#define lpfc_eq_context_autovalid_WORD word0
uint32_t word1;
#define lpfc_eq_context_count_SHIFT 26
#define lpfc_eq_context_count_MASK 0x00000003
@@ -1173,6 +1176,9 @@ struct cq_context {
#define LPFC_CQ_CNT_512 0x1
#define LPFC_CQ_CNT_1024 0x2
#define LPFC_CQ_CNT_WORD7 0x3
+#define lpfc_cq_context_autovalid_SHIFT 15
+#define lpfc_cq_context_autovalid_MASK 0x00000001
+#define lpfc_cq_context_autovalid_WORD word0
uint32_t word1;
#define lpfc_cq_eq_id_SHIFT 22 /* Version 0 Only */
#define lpfc_cq_eq_id_MASK 0x000000FF
@@ -1231,9 +1237,9 @@ struct lpfc_mbx_cq_create_set {
#define lpfc_mbx_cq_create_set_cqe_size_SHIFT 25
#define lpfc_mbx_cq_create_set_cqe_size_MASK 0x00000003
#define lpfc_mbx_cq_create_set_cqe_size_WORD word1
-#define lpfc_mbx_cq_create_set_auto_SHIFT 15
-#define lpfc_mbx_cq_create_set_auto_MASK 0x0000001
-#define lpfc_mbx_cq_create_set_auto_WORD word1
+#define lpfc_mbx_cq_create_set_autovalid_SHIFT 15
+#define lpfc_mbx_cq_create_set_autovalid_MASK 0x0000001
+#define lpfc_mbx_cq_create_set_autovalid_WORD word1
#define lpfc_mbx_cq_create_set_nodelay_SHIFT 14
#define lpfc_mbx_cq_create_set_nodelay_MASK 0x00000001
#define lpfc_mbx_cq_create_set_nodelay_WORD word1
@@ -3288,6 +3294,9 @@ struct lpfc_sli4_parameters {
#define cfg_sli_hint_2_MASK 0x0000001f
#define cfg_sli_hint_2_WORD word1
uint32_t word2;
+#define cfg_eqav_SHIFT 31
+#define cfg_eqav_MASK 0x00000001
+#define cfg_eqav_WORD word2
uint32_t word3;
uint32_t word4;
#define cfg_cqv_SHIFT 14
@@ -3296,6 +3305,9 @@ struct lpfc_sli4_parameters {
#define cfg_cqpsize_SHIFT 16
#define cfg_cqpsize_MASK 0x000000ff
#define cfg_cqpsize_WORD word4
+#define cfg_cqav_SHIFT 31
+#define cfg_cqav_MASK 0x00000001
+#define cfg_cqav_WORD word4
uint32_t word5;
uint32_t word6;
#define cfg_mqv_SHIFT 14
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index c38d57353edf..ad51bfcd929b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8060,6 +8060,7 @@ lpfc_alloc_nvme_wq_cq(struct lpfc_hba *phba, int wqidx)
wqidx);
return 1;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvme_cq[wqidx] = qdesc;
qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
@@ -8097,6 +8098,7 @@ lpfc_alloc_fcp_wq_cq(struct lpfc_hba *phba, int wqidx)
"0499 Failed allocate fast-path FCP CQ (%d)\n", wqidx);
return 1;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.fcp_cq[wqidx] = qdesc;
/* Create Fast Path FCP WQs */
@@ -8290,6 +8292,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0497 Failed allocate EQ (%d)\n", idx);
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.hba_eq[idx] = qdesc;
}
@@ -8315,6 +8318,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"CQ Set (%d)\n", idx);
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvmet_cqset[idx] = qdesc;
}
}
@@ -8332,6 +8336,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0500 Failed allocate slow-path mailbox CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.mbx_cq = qdesc;
/* Create slow-path ELS Complete Queue */
@@ -8343,6 +8348,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"0501 Failed allocate slow-path ELS CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.els_cq = qdesc;
@@ -8388,6 +8394,7 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
"6079 Failed allocate NVME LS CQ\n");
goto out_error;
}
+ qdesc->qe_valid = 1;
phba->sli4_hba.nvmels_cq = qdesc;
/* Create NVME LS Work Queue */
@@ -10566,6 +10573,8 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
+ sli4_params->eqav = bf_get(cfg_eqav, mbx_sli4_parameters);
+ sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters);
sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters);
sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
mbx_sli4_parameters);
@@ -12384,6 +12393,7 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
if (!qdesc)
goto out_error;
+ qdesc->qe_valid = 1;
phba->sli4_hba.fof_eq = qdesc;
if (phba->cfg_fof) {
@@ -12402,6 +12412,7 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
if (!qdesc)
goto out_error;
+ qdesc->qe_valid = 1;
phba->sli4_hba.oas_cq = qdesc;
/* Create OAS WQ */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1b07e61fb7bd..a5d6d8eddd2b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -288,16 +288,18 @@ lpfc_sli4_mq_release(struct lpfc_queue *q)
static struct lpfc_eqe *
lpfc_sli4_eq_get(struct lpfc_queue *q)
{
+ struct lpfc_hba *phba;
struct lpfc_eqe *eqe;
uint32_t idx;
/* sanity check on queue memory */
if (unlikely(!q))
return NULL;
+ phba = q->phba;
eqe = q->qe[q->hba_index].eqe;
/* If the next EQE is not valid then we are done */
- if (!bf_get_le32(lpfc_eqe_valid, eqe))
+ if (bf_get_le32(lpfc_eqe_valid, eqe) != q->qe_valid)
return NULL;
/* If the host has not yet processed the next entry then we are done */
idx = ((q->hba_index + 1) % q->entry_count);
@@ -305,6 +307,10 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
return NULL;
q->hba_index = idx;
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.eqav && !q->hba_index)
+ q->qe_valid = (q->qe_valid) ? 0 : 1;
+
/*
* insert barrier for instruction interlock : data from the hardware
@@ -376,17 +382,21 @@ uint32_t
lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_eqe *temp_eqe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_eqe = q->qe[q->host_index].eqe;
- bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.eqav) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -430,17 +440,21 @@ uint32_t
lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_eqe *temp_eqe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_eqe = q->qe[q->host_index].eqe;
- bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.eqav) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set_le32(lpfc_eqe_valid, temp_eqe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -472,23 +486,28 @@ lpfc_sli4_if6_eq_release(struct lpfc_queue *q, bool arm)
static struct lpfc_cqe *
lpfc_sli4_cq_get(struct lpfc_queue *q)
{
+ struct lpfc_hba *phba;
struct lpfc_cqe *cqe;
uint32_t idx;
/* sanity check on queue memory */
if (unlikely(!q))
return NULL;
+ phba = q->phba;
+ cqe = q->qe[q->hba_index].cqe;
/* If the next CQE is not valid then we are done */
- if (!bf_get_le32(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+ if (bf_get_le32(lpfc_cqe_valid, cqe) != q->qe_valid)
return NULL;
/* If the host has not yet processed the next entry then we are done */
idx = ((q->hba_index + 1) % q->entry_count);
if (idx == q->host_index)
return NULL;
- cqe = q->qe[q->hba_index].cqe;
q->hba_index = idx;
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.cqav && !q->hba_index)
+ q->qe_valid = (q->qe_valid) ? 0 : 1;
/*
* insert barrier for instruction interlock : data from the hardware
@@ -521,16 +540,21 @@ uint32_t
lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_cqe *temp_qe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
+
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_qe = q->qe[q->host_index].cqe;
- bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.cqav) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -569,16 +593,21 @@ uint32_t
lpfc_sli4_if6_cq_release(struct lpfc_queue *q, bool arm)
{
uint32_t released = 0;
+ struct lpfc_hba *phba;
struct lpfc_cqe *temp_qe;
struct lpfc_register doorbell;
/* sanity check on queue memory */
if (unlikely(!q))
return 0;
+ phba = q->phba;
+
/* while there are valid entries */
while (q->hba_index != q->host_index) {
- temp_qe = q->qe[q->host_index].cqe;
- bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ if (!phba->sli4_hba.pc_sli4_params.cqav) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set_le32(lpfc_cqe_valid, temp_qe, 0);
+ }
released++;
q->host_index = ((q->host_index + 1) % q->entry_count);
}
@@ -7372,6 +7401,7 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
struct lpfc_queue *mcq;
struct lpfc_mcqe *mcqe;
bool pending_completions = false;
+ uint8_t qe_valid;
if (unlikely(!phba) || (phba->sli_rev != LPFC_SLI_REV4))
return false;
@@ -7380,7 +7410,8 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
mcq = phba->sli4_hba.mbx_cq;
idx = mcq->hba_index;
- while (bf_get_le32(lpfc_cqe_valid, mcq->qe[idx].cqe)) {
+ qe_valid = mcq->qe_valid;
+ while (bf_get_le32(lpfc_cqe_valid, mcq->qe[idx].cqe) == qe_valid) {
mcqe = (struct lpfc_mcqe *)mcq->qe[idx].cqe;
if (bf_get_le32(lpfc_trailer_completed, mcqe) &&
(!bf_get_le32(lpfc_trailer_async, mcqe))) {
@@ -7390,6 +7421,10 @@ lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
idx = (idx + 1) % mcq->entry_count;
if (mcq->hba_index == idx)
break;
+
+ /* if the index wrapped around, toggle the valid bit */
+ if (phba->sli4_hba.pc_sli4_params.cqav && !idx)
+ qe_valid = (qe_valid) ? 0 : 1;
}
return pending_completions;
@@ -8263,7 +8298,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
} else if (flag == MBX_POLL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2542 Try to issue mailbox command "
- "x%x (x%x/x%x) synchronously ahead of async"
+ "x%x (x%x/x%x) synchronously ahead of async "
"mailbox command queue: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
@@ -14340,11 +14375,21 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
LPFC_MBOX_OPCODE_EQ_CREATE,
length, LPFC_SLI4_MBX_EMBED);
eq_create = &mbox->u.mqe.un.eq_create;
+ shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
eq->page_count);
bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
LPFC_EQE_SIZE);
bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+
+ /* Use version 2 of CREATE_EQ if eqav is set */
+ if (phba->sli4_hba.pc_sli4_params.eqav) {
+ bf_set(lpfc_mbox_hdr_version, &shdr->request,
+ LPFC_Q_CREATE_VERSION_2);
+ bf_set(lpfc_eq_context_autovalid, &eq_create->u.request.context,
+ phba->sli4_hba.pc_sli4_params.eqav);
+ }
+
/* don't setup delay multiplier using EQ_CREATE */
dmult = 0;
bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
@@ -14389,7 +14434,6 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (shdr_status || shdr_add_status || rc) {
@@ -14472,6 +14516,8 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
(cq->page_size / SLI4_PAGE_SIZE));
bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
eq->queue_id);
+ bf_set(lpfc_cq_context_autovalid, &cq_create->u.request.context,
+ phba->sli4_hba.pc_sli4_params.cqav);
} else {
bf_set(lpfc_cq_eq_id, &cq_create->u.request.context,
eq->queue_id);
@@ -14643,6 +14689,9 @@ lpfc_cq_create_set(struct lpfc_hba *phba, struct lpfc_queue **cqp,
&cq_set->u.request, 0);
bf_set(lpfc_mbx_cq_create_set_num_cq,
&cq_set->u.request, numcq);
+ bf_set(lpfc_mbx_cq_create_set_autovalid,
+ &cq_set->u.request,
+ phba->sli4_hba.pc_sli4_params.cqav);
switch (cq->entry_count) {
case 2048:
case 4096:
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 708167b309bd..cf64aca82bd0 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -216,6 +216,7 @@ struct lpfc_queue {
struct work_struct spwork;
uint64_t isr_timestamp;
+ uint8_t qe_valid;
struct lpfc_queue *assoc_qp;
union sli4_qe qe[1]; /* array to index entries (must be last) */
};
@@ -486,6 +487,8 @@ struct lpfc_pc_sli4_params {
uint8_t mqv;
uint8_t wqv;
uint8_t rqv;
+ uint8_t eqav;
+ uint8_t cqav;
uint8_t wqsize;
#define LPFC_WQ_SZ64_SUPPORT 1
#define LPFC_WQ_SZ128_SUPPORT 2
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 08/13] lpfc: Enable fw download on if_type=6 devices
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (6 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 09/13] lpfc: Add embedded data pointers for enhanced performance James Smart
` (4 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Current code is very explicit in what it allows to be downloaded.
The driver checking prevented G7 firmware download. The driver
checking is unnecessary as the device will validate what it receives.
Revise the firmware download interface checking.
Added a little debug support in case there is still a failure.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_hw4.h | 5 +----
drivers/scsi/lpfc/lpfc_init.c | 44 ++++++++++++++++++++++++++++++-------------
drivers/scsi/lpfc/lpfc_sli.c | 1 +
3 files changed, 33 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index dba724e1f5ee..be8227dfa086 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -2241,6 +2241,7 @@ struct lpfc_mbx_redisc_fcf_tbl {
* command.
*/
#define ADD_STATUS_OPERATION_ALREADY_ACTIVE 0x67
+#define ADD_STATUS_FW_NOT_SUPPORTED 0xEB
struct lpfc_mbx_sli4_config {
struct mbox_header header;
@@ -4603,10 +4604,6 @@ union lpfc_wqe128 {
struct gen_req64_wqe gen_req;
};
-#define LPFC_GROUP_OJECT_MAGIC_G5 0xfeaa0001
-#define LPFC_GROUP_OJECT_MAGIC_G6 0xfeaa0003
-#define LPFC_FILE_TYPE_GROUP 0xf7
-#define LPFC_FILE_ID_GROUP 0xa2
struct lpfc_grp_hdr {
uint32_t size;
uint32_t magic_number;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ad51bfcd929b..0e05f802bfaa 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11294,6 +11294,27 @@ lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba)
}
+static void
+lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
+ uint32_t magic_number, uint32_t ftype, uint32_t fid, uint32_t fsize,
+ const struct firmware *fw)
+{
+ if (offset == ADD_STATUS_FW_NOT_SUPPORTED)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3030 This firmware version is not supported on "
+ "this HBA model. Device:%x Magic:%x Type:%x "
+ "ID:%x Size %d %zd\n",
+ phba->pcidev->device, magic_number, ftype, fid,
+ fsize, fw->size);
+ else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3022 FW Download failed. Device:%x Magic:%x Type:%x "
+ "ID:%x Size %d %zd\n",
+ phba->pcidev->device, magic_number, ftype, fid,
+ fsize, fw->size);
+}
+
+
/**
* lpfc_write_firmware - attempt to write a firmware image to the port
* @fw: pointer to firmware image returned from request_firmware.
@@ -11321,20 +11342,10 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
magic_number = be32_to_cpu(image->magic_number);
ftype = bf_get_be32(lpfc_grp_hdr_file_type, image);
- fid = bf_get_be32(lpfc_grp_hdr_id, image),
+ fid = bf_get_be32(lpfc_grp_hdr_id, image);
fsize = be32_to_cpu(image->size);
INIT_LIST_HEAD(&dma_buffer_list);
- if ((magic_number != LPFC_GROUP_OJECT_MAGIC_G5 &&
- magic_number != LPFC_GROUP_OJECT_MAGIC_G6) ||
- ftype != LPFC_FILE_TYPE_GROUP || fsize != fw->size) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3022 Invalid FW image found. "
- "Magic:%x Type:%x ID:%x Size %d %zd\n",
- magic_number, ftype, fid, fsize, fw->size);
- rc = -EINVAL;
- goto release_out;
- }
lpfc_decode_firmware_rev(phba, fwrev, 1);
if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -11375,11 +11386,18 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
}
rc = lpfc_wr_object(phba, &dma_buffer_list,
(fw->size - offset), &offset);
- if (rc)
+ if (rc) {
+ lpfc_log_write_firmware_error(phba, offset,
+ magic_number, ftype, fid, fsize, fw);
goto release_out;
+ }
}
rc = offset;
- }
+ } else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3029 Skipped Firmware update, Current "
+ "Version:%s New Version:%s\n",
+ fwrev, image->revision);
release_out:
list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a5d6d8eddd2b..01691a5351bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -18876,6 +18876,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
+ *offset = shdr_add_status;
} else
*offset += wr_object->u.response.actual_write_length;
return rc;
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 09/13] lpfc: Add embedded data pointers for enhanced performance
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (7 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 08/13] lpfc: Enable fw download on if_type=6 devices James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 10/13] lpfc: Fix nvme embedded io length on new hardware James Smart
` (3 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
The current driver isn't taking advantage of a performance hint whereby
the initial data buffer descriptor can be placed in the WQE as well as
the SGL.
Add the logic to detect support for the feature and to use it when
supported.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc.h | 2 ++
drivers/scsi/lpfc/lpfc_hw4.h | 3 +++
drivers/scsi/lpfc/lpfc_init.c | 21 +++++++++++++++++++++
drivers/scsi/lpfc/lpfc_nvme.c | 18 ++++++++++++++++++
drivers/scsi/lpfc/lpfc_nvmet.c | 24 ++++++++++++++++++++++++
drivers/scsi/lpfc/lpfc_scsi.c | 8 ++++++--
drivers/scsi/lpfc/lpfc_sli.c | 25 +++++++++++++++++++++----
7 files changed, 95 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 7aad4a717f13..9136a59b1c5b 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -840,6 +840,8 @@ struct lpfc_hba {
#define LPFC_ENABLE_FCP 1
#define LPFC_ENABLE_NVME 2
#define LPFC_ENABLE_BOTH 3
+ uint32_t nvme_embed_pbde;
+ uint32_t fcp_embed_pbde;
uint32_t io_channel_irqs; /* number of irqs for io channels */
struct nvmet_fc_target_port *targetport;
lpfc_vpd_t vpd; /* vital product data */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index be8227dfa086..ed5e870c58c3 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -4226,6 +4226,9 @@ struct wqe_common {
#define wqe_irsp_SHIFT 4
#define wqe_irsp_MASK 0x00000001
#define wqe_irsp_WORD word11
+#define wqe_pbde_SHIFT 5
+#define wqe_pbde_MASK 0x00000001
+#define wqe_pbde_WORD word11
#define wqe_sup_SHIFT 6
#define wqe_sup_MASK 0x00000001
#define wqe_sup_WORD word11
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0e05f802bfaa..b04fd30e9de0 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -10605,6 +10605,19 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
}
+ /* Only embed PBDE for if_type 6 */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_6) {
+ phba->fcp_embed_pbde = 1;
+ phba->nvme_embed_pbde = 1;
+ }
+
+ /* PBDE support requires xib be set */
+ if (!bf_get(cfg_xib, mbx_sli4_parameters)) {
+ phba->fcp_embed_pbde = 0;
+ phba->nvme_embed_pbde = 0;
+ }
+
/*
* To support Suppress Response feature we must satisfy 3 conditions.
* lpfc_suppress_rsp module parameter must be set (default).
@@ -10636,6 +10649,14 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
else
phba->fcp_embed_io = 0;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
+ "6422 XIB %d: FCP %d %d "
+ "NVME %d %d %d\n",
+ bf_get(cfg_xib, mbx_sli4_parameters),
+ phba->fcp_embed_pbde, phba->fcp_embed_io,
+ phba->nvme_support, phba->nvme_embed_pbde,
+ phba->cfg_suppress_rsp);
+
if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) &&
(bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) &&
(sli4_params->wqsize & LPFC_WQ_SZ128_SUPPORT))
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 527e63c1f1ac..63e2d64da68f 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1167,6 +1167,7 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
struct scatterlist *data_sg;
struct sli4_sge *first_data_sgl;
+ struct ulp_bde64 *bde;
dma_addr_t physaddr;
uint32_t num_bde = 0;
uint32_t dma_len;
@@ -1234,7 +1235,24 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
data_sg = sg_next(data_sg);
sgl++;
}
+ if (phba->nvme_embed_pbde) {
+ /* Use PBDE support for first SGL only, offset == 0 */
+ /* Words 13-15 */
+ bde = (struct ulp_bde64 *)
+ &wqe->words[13];
+ bde->addrLow = first_data_sgl->addr_lo;
+ bde->addrHigh = first_data_sgl->addr_hi;
+ bde->tus.f.bdeSize =
+ le32_to_cpu(first_data_sgl->sge_len);
+ bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bde->tus.w = cpu_to_le32(bde->tus.w);
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 1);
+ } else
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
+
} else {
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
+
/* For this clause to be valid, the payload_length
* and sg_cnt must zero.
*/
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index a332a6638b1b..f025933397cf 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -2150,9 +2150,11 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
struct lpfc_iocbq *nvmewqe;
struct scatterlist *sgel;
union lpfc_wqe128 *wqe;
+ struct ulp_bde64 *bde;
uint32_t *txrdy;
dma_addr_t physaddr;
int i, cnt;
+ int do_pbde;
int xc = 1;
if (!lpfc_is_link_up(phba)) {
@@ -2243,6 +2245,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
/* Word 7 */
bf_set(wqe_pu, &wqe->fcp_tsend.wqe_com, 1);
bf_set(wqe_cmnd, &wqe->fcp_tsend.wqe_com, CMD_FCP_TSEND64_WQE);
+ do_pbde = 0;
/* Word 8 */
wqe->fcp_tsend.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2355,6 +2358,10 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_ar, &wqe->fcp_treceive.wqe_com, 0);
bf_set(wqe_cmnd, &wqe->fcp_treceive.wqe_com,
CMD_FCP_TRECEIVE64_WQE);
+ if (phba->nvme_embed_pbde)
+ do_pbde = 1;
+ else
+ do_pbde = 0;
/* Word 8 */
wqe->fcp_treceive.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2438,6 +2445,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(wqe_pu, &wqe->fcp_trsp.wqe_com, 0);
bf_set(wqe_ag, &wqe->fcp_trsp.wqe_com, 1);
bf_set(wqe_cmnd, &wqe->fcp_trsp.wqe_com, CMD_FCP_TRSP64_WQE);
+ do_pbde = 0;
/* Word 8 */
wqe->fcp_trsp.wqe_com.abort_tag = nvmewqe->iotag;
@@ -2508,9 +2516,25 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba *phba,
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(cnt);
+ if (do_pbde && (i == 0)) {
+ bde = (struct ulp_bde64 *)&wqe->words[13];
+ memset(bde, 0, sizeof(struct ulp_bde64));
+ /* Words 13-15 (PBDE)*/
+ bde->addrLow = sgl->addr_lo;
+ bde->addrHigh = sgl->addr_hi;
+ bde->tus.f.bdeSize =
+ le32_to_cpu(sgl->sge_len);
+ bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bde->tus.w = cpu_to_le32(bde->tus.w);
+ }
sgl++;
ctxp->offset += cnt;
}
+
+ if (do_pbde)
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 1);
+ else
+ bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
ctxp->state = LPFC_NVMET_STE_DATA;
ctxp->entry_cnt++;
return nvmewqe;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c595046a521b..fb81e8a8fb1c 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3304,8 +3304,12 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
dma_offset += dma_len;
sgl++;
}
- /* setup the performance hint (first data BDE) if enabled */
- if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
+ /*
+ * Setup the first Payload BDE. For FCoE we just key off
+ * Performance Hints, for FC we utilize fcp_embed_pbde.
+ */
+ if ((phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) ||
+ phba->fcp_embed_pbde) {
bde = (struct ulp_bde64 *)
&(iocb_cmd->unsli3.sli3Words[5]);
bde->addrLow = first_data_sgl->addr_lo;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 01691a5351bd..3b92dfb2ee33 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6963,10 +6963,15 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
"0378 No support for fcpi mode.\n");
ftr_rsp++;
}
- if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
- phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
- else
- phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
+
+ /* Performance Hints are ONLY for FCoE */
+ if (phba->hba_flag & HBA_FCOE_MODE) {
+ if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
+ phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
+ else
+ phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
+ }
+
/*
* If the port cannot support the host's requested features
* then turn off the global config parameters to disable the
@@ -9068,6 +9073,12 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
}
/* Note, word 10 is already initialized to 0 */
+ /* Don't set PBDE for Perf hints, just fcp_embed_pbde */
+ if (phba->fcp_embed_pbde)
+ bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 1);
+ else
+ bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 0);
+
if (phba->fcp_embed_io) {
struct lpfc_scsi_buf *lpfc_cmd;
struct sli4_sge *sgl;
@@ -9127,6 +9138,12 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
}
/* Note, word 10 is already initialized to 0 */
+ /* Don't set PBDE for Perf hints, just fcp_embed_pbde */
+ if (phba->fcp_embed_pbde)
+ bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 1);
+ else
+ bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 0);
+
if (phba->fcp_embed_io) {
struct lpfc_scsi_buf *lpfc_cmd;
struct sli4_sge *sgl;
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 10/13] lpfc: Fix nvme embedded io length on new hardware
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (8 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 09/13] lpfc: Add embedded data pointers for enhanced performance James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 11/13] lpfc: Work around NVME cmd iu SGL type James Smart
` (2 subsequent siblings)
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Newer hardware more strictly enforces buffer lenghts, causing an
mis-set value to be identified. Older hardware won't catch it.
The difference is benign on old hardware.
Set the right embedded buffer length for nvme ios.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_nvme.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 63e2d64da68f..d3eaa6d59179 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -655,7 +655,7 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
/* Word 0-2 - NVME CMND IU (embedded payload) */
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
- wqe->generic.bde.tus.f.bdeSize = 60;
+ wqe->generic.bde.tus.f.bdeSize = 56;
wqe->generic.bde.addrHigh = 0;
wqe->generic.bde.addrLow = 64; /* Word 16 */
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 11/13] lpfc: Work around NVME cmd iu SGL type
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (9 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 10/13] lpfc: Fix nvme embedded io length on new hardware James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 12/13] lpfc: update driver version to 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 13/13] lpfc: Update 12.0.0.0 modified files for 2018 Copyright James Smart
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
The hardware offload for NVME commands was created when the
FC-NVME standard was setting SGL Descriptor Type to SGL Data
Block Descriptor (0h) and SGL Descriptor Sub Type to Address (0h).
A late change in NVMe-over-Fabrics obsoleted these values, creating
a transport SGL descriptor type with new values to go into these
fields.
For initial hardware support, in order to be compliant to the spec,
use host-supplied cmd IU buffers instead of the adapter generated
values. Later hardware will correct this.
Add a module parameter to override this offload disablement if looking
for lowest latency. This is reasonable as nothing in FC-NVME uses
the SQE SGL values.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 14 ++++++++++++
drivers/scsi/lpfc/lpfc_hw4.h | 1 +
drivers/scsi/lpfc/lpfc_init.c | 4 ++--
drivers/scsi/lpfc/lpfc_nvme.c | 51 ++++++++++++++++++++++++++++++-------------
drivers/scsi/lpfc/lpfc_sli.c | 15 +++++++++++++
6 files changed, 69 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9136a59b1c5b..6c0d351c0d0d 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -782,6 +782,7 @@ struct lpfc_hba {
uint32_t cfg_fcp_io_channel;
uint32_t cfg_suppress_rsp;
uint32_t cfg_nvme_oas;
+ uint32_t cfg_nvme_embed_cmd;
uint32_t cfg_nvme_io_channel;
uint32_t cfg_nvmet_mrq;
uint32_t cfg_enable_nvmet;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ec080de4e7a7..86d241642d03 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5059,6 +5059,18 @@ LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
"Use OAS bit on NVME IOs");
/*
+ * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs
+ *
+ * 0 = Put NVME Command in SGL
+ * 1 = Embed NVME Command in WQE (unless G7)
+ * 2 = Embed NVME Command in WQE (force)
+ *
+ * Value range is [0,2]. Default value is 1.
+ */
+LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,
+ "Embed NVME Command in WQE");
+
+/*
* lpfc_fcp_io_channel: Set the number of FCP IO channels the driver
* will advertise it supports to the SCSI layer. This also will map to
* the number of WQs the driver will create.
@@ -5299,6 +5311,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_task_mgmt_tmo,
&dev_attr_lpfc_use_msi,
&dev_attr_lpfc_nvme_oas,
+ &dev_attr_lpfc_nvme_embed_cmd,
&dev_attr_lpfc_auto_imax,
&dev_attr_lpfc_fcp_imax,
&dev_attr_lpfc_fcp_cpu_map,
@@ -6323,6 +6336,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
lpfc_use_msi_init(phba, lpfc_use_msi);
lpfc_nvme_oas_init(phba, lpfc_nvme_oas);
+ lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd);
lpfc_auto_imax_init(phba, lpfc_auto_imax);
lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index ed5e870c58c3..37c547b4bc78 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -2678,6 +2678,7 @@ struct lpfc_mbx_read_rev {
#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
#define lpfc_mbx_rd_rev_vpd_WORD word1
uint32_t first_hw_rev;
+#define LPFC_G7_ASIC_1 0xd
uint32_t second_hw_rev;
uint32_t word4_rsvd;
uint32_t third_hw_rev;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b04fd30e9de0..d7659dff9df4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -10651,11 +10651,11 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
"6422 XIB %d: FCP %d %d "
- "NVME %d %d %d\n",
+ "NVME %d %d %d %d\n",
bf_get(cfg_xib, mbx_sli4_parameters),
phba->fcp_embed_pbde, phba->fcp_embed_io,
phba->nvme_support, phba->nvme_embed_pbde,
- phba->cfg_suppress_rsp);
+ phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);
if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) &&
(bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) &&
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index d3eaa6d59179..c094683b14b5 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -617,11 +617,21 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
struct lpfc_nvme_buf *lpfc_ncmd,
struct nvmefc_fcp_req *nCmd)
{
+ struct lpfc_hba *phba = vport->phba;
struct sli4_sge *sgl;
union lpfc_wqe128 *wqe;
uint32_t *wptr, *dptr;
/*
+ * Get a local pointer to the built-in wqe and correct
+ * the cmd size to match NVME's 96 bytes and fix
+ * the dma address.
+ */
+
+ /* 128 byte wqe support here */
+ wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
+
+ /*
* Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
* match NVME. NVME sends 96 bytes. Also, use the
* nvme commands command and response dma addresses
@@ -630,6 +640,25 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
*/
sgl = lpfc_ncmd->nvme_sgl;
sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
+ if (phba->cfg_nvme_embed_cmd) {
+ sgl->addr_hi = 0;
+ sgl->addr_lo = 0;
+
+ /* Word 0-2 - NVME CMND IU (embedded payload) */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ wqe->generic.bde.tus.f.bdeSize = 56;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 64; /* Word 16 */
+ } else {
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->cmddma));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->cmddma));
+
+ /* Word 0-2 - NVME CMND IU Inline BDE */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ wqe->generic.bde.tus.f.bdeSize = nCmd->cmdlen;
+ wqe->generic.bde.addrHigh = sgl->addr_hi;
+ wqe->generic.bde.addrLow = sgl->addr_lo;
+ }
sgl++;
@@ -644,27 +673,19 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(nCmd->rsplen);
- /*
- * Get a local pointer to the built-in wqe and correct
- * the cmd size to match NVME's 96 bytes and fix
- * the dma address.
- */
-
- /* 128 byte wqe support here */
- wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
-
- /* Word 0-2 - NVME CMND IU (embedded payload) */
- wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
- wqe->generic.bde.tus.f.bdeSize = 56;
- wqe->generic.bde.addrHigh = 0;
- wqe->generic.bde.addrLow = 64; /* Word 16 */
-
/* Word 3 */
bf_set(payload_offset_len, &wqe->fcp_icmd,
(nCmd->rsplen + nCmd->cmdlen));
/* Word 10 */
bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
+
+ if (!phba->cfg_nvme_embed_cmd) {
+ bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 0);
+ return;
+ }
+ bf_set(wqe_dbde, &wqe->generic.wqe_com, 0);
bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
/*
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3b92dfb2ee33..1091b52afeee 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6885,6 +6885,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
/* Save information as VPD data */
phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
phba->vpd.rev.smRev = mqe->un.read_rev.second_hw_rev;
+
+ /*
+ * This is because first G7 ASIC doesn't support the standard
+ * 0x5a NVME cmd descriptor type/subtype
+ */
+ if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_6) &&
+ (phba->vpd.rev.biuRev == LPFC_G7_ASIC_1) &&
+ (phba->vpd.rev.smRev == 0) &&
+ (phba->cfg_nvme_embed_cmd == 1))
+ phba->cfg_nvme_embed_cmd = 0;
+
phba->vpd.rev.endecRev = mqe->un.read_rev.third_hw_rev;
phba->vpd.rev.fcphHigh = bf_get(lpfc_mbx_rd_rev_fcph_high,
&mqe->un.read_rev);
@@ -9101,6 +9113,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
wqe128->generic.bde.addrLow = 88; /* Word 22 */
bf_set(wqe_wqes, &wqe128->fcp_iwrite.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe128->fcp_iwrite.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
ptr = &wqe128->words[22];
@@ -9166,6 +9179,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
wqe128->generic.bde.addrLow = 88; /* Word 22 */
bf_set(wqe_wqes, &wqe128->fcp_iread.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe128->fcp_iread.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
ptr = &wqe128->words[22];
@@ -9224,6 +9238,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
wqe128->generic.bde.addrLow = 88; /* Word 22 */
bf_set(wqe_wqes, &wqe128->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_dbde, &wqe128->fcp_icmd.wqe_com, 0);
/* Word 22-29 FCP CMND Payload */
ptr = &wqe128->words[22];
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 12/13] lpfc: update driver version to 12.0.0.0
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (10 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 11/13] lpfc: Work around NVME cmd iu SGL type James Smart
@ 2018-01-26 19:31 ` James Smart
2018-01-26 19:31 ` [PATCH 13/13] lpfc: Update 12.0.0.0 modified files for 2018 Copyright James Smart
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Update the driver version to 12.0.0.0
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_version.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 3b04ecb17a38..830dc36ab028 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -20,7 +20,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.4.0.7"
+#define LPFC_DRIVER_VERSION "12.0.0.0"
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 13/13] lpfc: Update 12.0.0.0 modified files for 2018 Copyright
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
` (11 preceding siblings ...)
2018-01-26 19:31 ` [PATCH 12/13] lpfc: update driver version to 12.0.0.0 James Smart
@ 2018-01-26 19:31 ` James Smart
12 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-26 19:31 UTC (permalink / raw)
To: linux-scsi; +Cc: James Smart, Dick Kennedy, James Smart
Updated Copyright in files updated 12.0.0.0
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_bsg.c | 2 +-
drivers/scsi/lpfc/lpfc_ct.c | 2 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 2 +-
drivers/scsi/lpfc/lpfc_debugfs.h | 2 +-
drivers/scsi/lpfc/lpfc_hw.h | 2 +-
drivers/scsi/lpfc/lpfc_ids.h | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 8b33b652226b..0f174ca80f67 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2009-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 03a7e13a049d..ebe8ac1b88e7 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 308303d501cf..fb0dc2aeed91 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2007-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 12fbf498a7ce..f32eaeb2225a 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2007-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index b91b429fe2df..2ebcf707bb3c 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
diff --git a/drivers/scsi/lpfc/lpfc_ids.h b/drivers/scsi/lpfc/lpfc_ids.h
index 329c8d28869c..07ee34017d88 100644
--- a/drivers/scsi/lpfc/lpfc_ids.h
+++ b/drivers/scsi/lpfc/lpfc_ids.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
--
2.13.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] lpfc: Add 64G link speed support
2018-01-26 19:31 ` [PATCH 06/13] lpfc: Add 64G link speed support James Smart
@ 2018-01-29 11:45 ` Steffen Maier
2018-01-29 18:32 ` James Smart
0 siblings, 1 reply; 20+ messages in thread
From: Steffen Maier @ 2018-01-29 11:45 UTC (permalink / raw)
To: James Smart, linux-scsi; +Cc: Dick Kennedy, James Smart
On 01/26/2018 08:31 PM, James Smart wrote:
> The G7 adapter supports 64G link speeds. Add support to the driver.
>
> In addition, a small cleanup to replace the odd bitmap logic with
> a switch case.
>
> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
> Signed-off-by: James Smart <james.smart@broadcom.com>
> ---
> 9 files changed, 92 insertions(+), 30 deletions(-)
> diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
> index d07d2fcbea34..b91b429fe2df 100644
> --- a/drivers/scsi/lpfc/lpfc_hw.h
> +++ b/drivers/scsi/lpfc/lpfc_hw.h
> @@ -2966,6 +2975,9 @@ struct lpfc_mbx_read_top {
> #define LPFC_LINK_SPEED_10GHZ 0x40
> #define LPFC_LINK_SPEED_16GHZ 0x80
> #define LPFC_LINK_SPEED_32GHZ 0x90
> +#define LPFC_LINK_SPEED_64GHZ 0xA0
> +#define LPFC_LINK_SPEED_128GHZ 0xB0
> +#define LPFC_LINK_SPEED_2568GHZ 0xC0
^
typo? 2568 => 256
The new 128 and 256 definitions do not seem to be used in this patch set?
--
Mit freundlichen Grüßen / Kind regards
Steffen Maier
Linux on z Systems Development
IBM Deutschland Research & Development GmbH
Vorsitzende des Aufsichtsrats: Martina Koederitz
Geschaeftsfuehrung: Dirk Wittkopp
Sitz der Gesellschaft: Boeblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 06/13] lpfc: Add 64G link speed support
2018-01-29 11:45 ` Steffen Maier
@ 2018-01-29 18:32 ` James Smart
0 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-01-29 18:32 UTC (permalink / raw)
To: Steffen Maier, James Smart, linux-scsi; +Cc: Dick Kennedy
On 1/29/2018 3:45 AM, Steffen Maier wrote:
> @@ -2966,6 +2975,9 @@ struct lpfc_mbx_read_top {
>> #define LPFC_LINK_SPEED_10GHZ 0x40
>> #define LPFC_LINK_SPEED_16GHZ 0x80
>> #define LPFC_LINK_SPEED_32GHZ 0x90
>> +#define LPFC_LINK_SPEED_64GHZ 0xA0
>> +#define LPFC_LINK_SPEED_128GHZ 0xB0
>> +#define LPFC_LINK_SPEED_2568GHZ 0xC0
> ^
> typo? 2568 => 256
>
> The new 128 and 256 definitions do not seem to be used in this patch set?
>
Yep. And not used yet. I'll fix in a repost. For the repost, I'll wait
until the other patches have a review.
-- james
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
@ 2018-02-07 0:26 ` Martin K. Petersen
2018-02-07 2:01 ` James Smart
0 siblings, 1 reply; 20+ messages in thread
From: Martin K. Petersen @ 2018-02-07 0:26 UTC (permalink / raw)
To: James Smart; +Cc: linux-scsi, Dick Kennedy, James Smart
James,
I was on the verge of applying this as well but saw that you intended a
re-spin. Found a few typos while poring over these patches:
> Prepare the code for new hardwre by creating a sli4-based callout
hardware
> table that can be set based on if_type.
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 04/13] lpfc: Add push-to-adapter support to sli4
2018-01-26 19:31 ` [PATCH 04/13] lpfc: Add push-to-adapter support to sli4 James Smart
@ 2018-02-07 0:27 ` Martin K. Petersen
0 siblings, 0 replies; 20+ messages in thread
From: Martin K. Petersen @ 2018-02-07 0:27 UTC (permalink / raw)
To: James Smart; +Cc: linux-scsi, Dick Kennedy, James Smart
James,
> New if_type=6 adapters support and additional BAR that provides
s/and/an/
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits
2018-01-26 19:31 ` [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits James Smart
@ 2018-02-07 0:28 ` Martin K. Petersen
0 siblings, 0 replies; 20+ messages in thread
From: Martin K. Petersen @ 2018-02-07 0:28 UTC (permalink / raw)
To: James Smart; +Cc: linux-scsi, Dick Kennedy, James Smart
James,
> in accessng the EQ/CQ elements is eliminated.
accessing
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers
2018-02-07 0:26 ` Martin K. Petersen
@ 2018-02-07 2:01 ` James Smart
0 siblings, 0 replies; 20+ messages in thread
From: James Smart @ 2018-02-07 2:01 UTC (permalink / raw)
To: Martin K. Petersen; +Cc: linux-scsi, Dick Kennedy, James Smart
On 2/6/2018 4:26 PM, Martin K. Petersen wrote:
>
> James,
>
> I was on the verge of applying this as well but saw that you intended a
> re-spin. Found a few typos while poring over these patches:
>
>> Prepare the code for new hardwre by creating a sli4-based callout
>
> hardware
>
>> table that can be set based on if_type.
>
ok - I'll correct what's been pointed out and repost. Thanks
-- james
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2018-02-07 2:01 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
2018-02-07 0:26 ` Martin K. Petersen
2018-02-07 2:01 ` James Smart
2018-01-26 19:31 ` [PATCH 02/13] lpfc: Rework sli4 doorbell infrastructure James Smart
2018-01-26 19:31 ` [PATCH 03/13] lpfc: Add SLI-4 if_type=6 support to the code base James Smart
2018-01-26 19:31 ` [PATCH 04/13] lpfc: Add push-to-adapter support to sli4 James Smart
2018-02-07 0:27 ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 05/13] lpfc: Add PCI Ids for if_type=6 hardware James Smart
2018-01-26 19:31 ` [PATCH 06/13] lpfc: Add 64G link speed support James Smart
2018-01-29 11:45 ` Steffen Maier
2018-01-29 18:32 ` James Smart
2018-01-26 19:31 ` [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits James Smart
2018-02-07 0:28 ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 08/13] lpfc: Enable fw download on if_type=6 devices James Smart
2018-01-26 19:31 ` [PATCH 09/13] lpfc: Add embedded data pointers for enhanced performance James Smart
2018-01-26 19:31 ` [PATCH 10/13] lpfc: Fix nvme embedded io length on new hardware James Smart
2018-01-26 19:31 ` [PATCH 11/13] lpfc: Work around NVME cmd iu SGL type James Smart
2018-01-26 19:31 ` [PATCH 12/13] lpfc: update driver version to 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 13/13] lpfc: Update 12.0.0.0 modified files for 2018 Copyright James Smart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.