Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
* Re: [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation
  2019-09-11 14:42 [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation Shengjiu Wang
@ 2019-09-11  6:31 ` Christophe Leroy
  2019-09-11 10:03 ` Mark Brown
  2019-09-11 14:42 ` [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver Shengjiu Wang
  2 siblings, 0 replies; 5+ messages in thread
From: Christophe Leroy @ 2019-09-11  6:31 UTC (permalink / raw)
  To: Shengjiu Wang, timur, nicoleotsuka, Xiubo.Lee, festevam,
	lgirdwood, broonie, perex, tiwai, alsa-devel, linuxppc-dev,
	linux-kernel, robh+dt, mark.rutland, devicetree

Hi Shengjiu,

Your mail is dated in the future, its time is 16:42 (GMT+2) whereas it 
is still the morning.

Please fix your clock or timezone for future mails.

Thanks
Christophe

Le 11/09/2019 à 16:42, Shengjiu Wang a écrit :
> Add the DT binding documentation for NXP MQS driver
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>   .../devicetree/bindings/sound/fsl,mqs.txt     | 20 +++++++++++++++++++
>   1 file changed, 20 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/sound/fsl,mqs.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
> new file mode 100644
> index 000000000000..a1dbe181204a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
> @@ -0,0 +1,20 @@
> +fsl,mqs audio CODEC
> +
> +Required properties:
> +
> +  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
> +		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
> +  - clocks : A list of phandles + clock-specifiers, one for each entry in
> +	     clock-names
> +  - clock-names : Must contain "mclk"
> +  - gpr : The gpr node.
> +
> +Example:
> +
> +mqs: mqs {
> +	compatible = "fsl,imx6sx-mqs";
> +	gpr = <&gpr>;
> +	clocks = <&clks IMX6SX_CLK_SAI1>;
> +	clock-names = "mclk";
> +	status = "disabled";
> +};
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation
  2019-09-11 14:42 [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation Shengjiu Wang
  2019-09-11  6:31 ` Christophe Leroy
@ 2019-09-11 10:03 ` Mark Brown
  2019-09-11 14:42 ` [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver Shengjiu Wang
  2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-09-11 10:03 UTC (permalink / raw)
  To: Shengjiu Wang
  Cc: mark.rutland, devicetree, alsa-devel, timur, Xiubo.Lee,
	linuxppc-dev, tiwai, lgirdwood, nicoleotsuka, robh+dt, festevam,
	linux-kernel

[-- Attachment #1.1: Type: text/plain, Size: 112 bytes --]

On Wed, Sep 11, 2019 at 10:42:38AM -0400, Shengjiu Wang wrote:

> +  - gpr : The gpr node.

What is a gpr node?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver
  2019-09-11 14:42 ` [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver Shengjiu Wang
@ 2019-09-11 10:12   ` Mark Brown
  0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-09-11 10:12 UTC (permalink / raw)
  To: Shengjiu Wang
  Cc: mark.rutland, devicetree, alsa-devel, timur, Xiubo.Lee,
	linuxppc-dev, tiwai, lgirdwood, nicoleotsuka, robh+dt, festevam,
	linux-kernel

[-- Attachment #1.1: Type: text/plain, Size: 1362 bytes --]

On Wed, Sep 11, 2019 at 10:42:39AM -0400, Shengjiu Wang wrote:

This looks good, a few minor comments below but nothing major -
it's mostly nits with the DT binding.

> --- /dev/null
> +++ b/sound/soc/fsl/fsl_mqs.c
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ALSA SoC IMX MQS driver
> + *
> + * Copyright (C) 2014-2019 Freescale Semiconductor, Inc.
> + *

Please make the entire comment block a C++ comment so things look
neater.

> +	/* On i.MX6sx the MQS control register is in GPR domain
> +	 * But in i.MX8QM/i.MX8QXP the control register is moved
> +	 * to its own domain.
> +	 */
> +	if (of_device_is_compatible(np, "fsl,imx8qm-mqs"))
> +		mqs_priv->use_gpr = false;
> +	else
> +		mqs_priv->use_gpr = true;

The GPR was listed as a required property in the binding document
but it is only needed here so the binding document should say
"required if compatible is...".

> +	} else {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		regs = devm_ioremap_resource(&pdev->dev, res);
> +		if (IS_ERR(regs))

You can use devm_platform_ioremap_resource() here.

> +		mqs_priv->ipg = devm_clk_get(&pdev->dev, "core");
> +		if (IS_ERR(mqs_priv->ipg)) {
> +			dev_err(&pdev->dev, "failed to get the clock: %ld\n",
> +				PTR_ERR(mqs_priv->ipg));
> +			goto out;
> +		}

The core clock wasn't listed in the bindings document.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation
@ 2019-09-11 14:42 Shengjiu Wang
  2019-09-11  6:31 ` Christophe Leroy
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Shengjiu Wang @ 2019-09-11 14:42 UTC (permalink / raw)
  To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
	perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
	mark.rutland, devicetree

Add the DT binding documentation for NXP MQS driver

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 .../devicetree/bindings/sound/fsl,mqs.txt     | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,mqs.txt

diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
new file mode 100644
index 000000000000..a1dbe181204a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -0,0 +1,20 @@
+fsl,mqs audio CODEC
+
+Required properties:
+
+  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
+		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
+  - clocks : A list of phandles + clock-specifiers, one for each entry in
+	     clock-names
+  - clock-names : Must contain "mclk"
+  - gpr : The gpr node.
+
+Example:
+
+mqs: mqs {
+	compatible = "fsl,imx6sx-mqs";
+	gpr = <&gpr>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "disabled";
+};
-- 
2.21.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver
  2019-09-11 14:42 [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation Shengjiu Wang
  2019-09-11  6:31 ` Christophe Leroy
  2019-09-11 10:03 ` Mark Brown
@ 2019-09-11 14:42 ` Shengjiu Wang
  2019-09-11 10:12   ` Mark Brown
  2 siblings, 1 reply; 5+ messages in thread
From: Shengjiu Wang @ 2019-09-11 14:42 UTC (permalink / raw)
  To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
	perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
	mark.rutland, devicetree

MQS (medium quality sound), is used to generate medium quality
audio via a standard digital output pin. It can be used to
connect stereo speakers or headphones simply via power amplifier
stages without an additional DAC chip. It only accepts 2-channel,
LSB-valid 16bit, MSB shift-out first, frame sync asserting with
the first bit of the frame, data shifted with the posedge of
bit clock, 44.1 kHz or 48 kHz signals from SAI1 in left justified
format; and it provides the SNR target as no more than 20dB for
the signals below 10 kHz. The signals above 10 kHz will have
worse THD+N values.

MQS provides only simple audio reproduction. No internal pop,
click or distortion artifact reduction methods are provided.

The MQS receives the audio data from the SAI1 Tx section.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/Kconfig   |  10 ++
 sound/soc/fsl/Makefile  |   2 +
 sound/soc/fsl/fsl_mqs.c | 336 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 348 insertions(+)
 create mode 100644 sound/soc/fsl/fsl_mqs.c

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index aa99c008a925..65e8cd4be930 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -25,6 +25,16 @@ config SND_SOC_FSL_SAI
 	  This option is only useful for out-of-tree drivers since
 	  in-tree drivers select it automatically.
 
+config SND_SOC_FSL_MQS
+	tristate "Medium Quality Sound (MQS) module support"
+	depends on SND_SOC_FSL_SAI
+	select REGMAP_MMIO
+	help
+	  Say Y if you want to add Medium Quality Sound (MQS)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
 config SND_SOC_FSL_AUDMIX
 	tristate "Audio Mixer (AUDMIX) module support"
 	select REGMAP_MMIO
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index c0dd04422fe9..8cde88c72d93 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -23,6 +23,7 @@ snd-soc-fsl-esai-objs := fsl_esai.o
 snd-soc-fsl-micfil-objs := fsl_micfil.o
 snd-soc-fsl-utils-objs := fsl_utils.o
 snd-soc-fsl-dma-objs := fsl_dma.o
+snd-soc-fsl-mqs-objs := fsl_mqs.o
 
 obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
 obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
@@ -33,6 +34,7 @@ obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o
 obj-$(CONFIG_SND_SOC_FSL_ESAI) += snd-soc-fsl-esai.o
 obj-$(CONFIG_SND_SOC_FSL_MICFIL) += snd-soc-fsl-micfil.o
 obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
+obj-$(CONFIG_SND_SOC_FSL_MQS) += snd-soc-fsl-mqs.o
 obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
 
 # MPC5200 Platform Support
diff --git a/sound/soc/fsl/fsl_mqs.c b/sound/soc/fsl/fsl_mqs.c
new file mode 100644
index 000000000000..d164f5da3460
--- /dev/null
+++ b/sound/soc/fsl/fsl_mqs.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALSA SoC IMX MQS driver
+ *
+ * Copyright (C) 2014-2019 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+
+#define REG_MQS_CTRL		0x00
+
+#define MQS_EN_MASK			(0x1 << 28)
+#define MQS_EN_SHIFT			(28)
+#define MQS_SW_RST_MASK			(0x1 << 24)
+#define MQS_SW_RST_SHIFT		(24)
+#define MQS_OVERSAMPLE_MASK		(0x1 << 20)
+#define MQS_OVERSAMPLE_SHIFT		(20)
+#define MQS_CLK_DIV_MASK		(0xFF << 0)
+#define MQS_CLK_DIV_SHIFT		(0)
+
+/* codec private data */
+struct fsl_mqs {
+	struct regmap *regmap;
+	struct clk *mclk;
+	struct clk *ipg;
+
+	unsigned int reg_iomuxc_gpr2;
+	unsigned int reg_mqs_ctrl;
+	bool use_gpr;
+};
+
+#define FSL_MQS_RATES	(SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
+#define FSL_MQS_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+
+static int fsl_mqs_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct fsl_mqs *mqs_priv = snd_soc_component_get_drvdata(component);
+	unsigned long mclk_rate;
+	int div, res;
+	int bclk, lrclk;
+
+	mclk_rate = clk_get_rate(mqs_priv->mclk);
+	bclk = snd_soc_params_to_bclk(params);
+	lrclk = params_rate(params);
+
+	/*
+	 * mclk_rate / (oversample(32,64) * FS * 2 * divider ) = repeat_rate;
+	 * if repeat_rate is 8, mqs can achieve better quality.
+	 * oversample rate is fix to 32 currently.
+	 */
+	div = mclk_rate / (32 * lrclk * 2 * 8);
+	res = mclk_rate % (32 * lrclk * 2 * 8);
+
+	if (res == 0 && div > 0 && div <= 256) {
+		if (mqs_priv->use_gpr) {
+			regmap_update_bits(mqs_priv->regmap, IOMUXC_GPR2,
+					   IMX6SX_GPR2_MQS_CLK_DIV_MASK,
+					   (div - 1) << IMX6SX_GPR2_MQS_CLK_DIV_SHIFT);
+			regmap_update_bits(mqs_priv->regmap, IOMUXC_GPR2,
+					   IMX6SX_GPR2_MQS_OVERSAMPLE_MASK, 0);
+		} else {
+			regmap_update_bits(mqs_priv->regmap, REG_MQS_CTRL,
+					   MQS_CLK_DIV_MASK,
+					   (div - 1) << MQS_CLK_DIV_SHIFT);
+			regmap_update_bits(mqs_priv->regmap, REG_MQS_CTRL,
+					   MQS_OVERSAMPLE_MASK, 0);
+		}
+	} else {
+		dev_err(component->dev, "can't get proper divider\n");
+	}
+
+	return 0;
+}
+
+static int fsl_mqs_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	/* Only LEFT_J & SLAVE mode is supported. */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fsl_mqs_startup(struct snd_pcm_substream *substream,
+			   struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct fsl_mqs *mqs_priv = snd_soc_component_get_drvdata(component);
+
+	if (mqs_priv->use_gpr)
+		regmap_update_bits(mqs_priv->regmap, IOMUXC_GPR2,
+				   IMX6SX_GPR2_MQS_EN_MASK,
+				   1 << IMX6SX_GPR2_MQS_EN_SHIFT);
+	else
+		regmap_update_bits(mqs_priv->regmap, REG_MQS_CTRL,
+				   MQS_EN_MASK,
+				   1 << MQS_EN_SHIFT);
+	return 0;
+}
+
+static void fsl_mqs_shutdown(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct fsl_mqs *mqs_priv = snd_soc_component_get_drvdata(component);
+
+	if (mqs_priv->use_gpr)
+		regmap_update_bits(mqs_priv->regmap, IOMUXC_GPR2,
+				   IMX6SX_GPR2_MQS_EN_MASK, 0);
+	else
+		regmap_update_bits(mqs_priv->regmap, REG_MQS_CTRL,
+				   MQS_EN_MASK, 0);
+}
+
+const static struct snd_soc_component_driver soc_codec_fsl_mqs = {
+	.idle_bias_on = 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct snd_soc_dai_ops fsl_mqs_dai_ops = {
+	.startup = fsl_mqs_startup,
+	.shutdown = fsl_mqs_shutdown,
+	.hw_params = fsl_mqs_hw_params,
+	.set_fmt = fsl_mqs_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver fsl_mqs_dai = {
+	.name		= "fsl-mqs-dai",
+	.playback	= {
+		.stream_name	= "Playback",
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= FSL_MQS_RATES,
+		.formats	= FSL_MQS_FORMATS,
+	},
+	.ops = &fsl_mqs_dai_ops,
+};
+
+static const struct regmap_config fsl_mqs_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = REG_MQS_CTRL,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int fsl_mqs_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *gpr_np = 0;
+	struct fsl_mqs *mqs_priv;
+	struct resource *res;
+	void __iomem *regs;
+	int ret = 0;
+
+	mqs_priv = devm_kzalloc(&pdev->dev, sizeof(*mqs_priv), GFP_KERNEL);
+	if (!mqs_priv)
+		return -ENOMEM;
+
+	/* On i.MX6sx the MQS control register is in GPR domain
+	 * But in i.MX8QM/i.MX8QXP the control register is moved
+	 * to its own domain.
+	 */
+	if (of_device_is_compatible(np, "fsl,imx8qm-mqs"))
+		mqs_priv->use_gpr = false;
+	else
+		mqs_priv->use_gpr = true;
+
+	if (mqs_priv->use_gpr) {
+		gpr_np = of_parse_phandle(np, "gpr", 0);
+		if (IS_ERR(gpr_np)) {
+			dev_err(&pdev->dev, "failed to get gpr node by phandle\n");
+			ret = PTR_ERR(gpr_np);
+			goto out;
+		}
+
+		mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
+		if (IS_ERR(mqs_priv->regmap)) {
+			dev_err(&pdev->dev, "failed to get gpr regmap\n");
+			ret = PTR_ERR(mqs_priv->regmap);
+			goto out;
+		}
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		regs = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(regs))
+			return PTR_ERR(regs);
+
+		mqs_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+							     "core",
+							     regs,
+							     &fsl_mqs_regmap_config);
+		if (IS_ERR(mqs_priv->regmap)) {
+			dev_err(&pdev->dev, "failed to init regmap: %ld\n",
+				PTR_ERR(mqs_priv->regmap));
+			return PTR_ERR(mqs_priv->regmap);
+		}
+
+		mqs_priv->ipg = devm_clk_get(&pdev->dev, "core");
+		if (IS_ERR(mqs_priv->ipg)) {
+			dev_err(&pdev->dev, "failed to get the clock: %ld\n",
+				PTR_ERR(mqs_priv->ipg));
+			goto out;
+		}
+	}
+
+	mqs_priv->mclk = devm_clk_get(&pdev->dev, "mclk");
+	if (IS_ERR(mqs_priv->mclk)) {
+		dev_err(&pdev->dev, "failed to get the clock: %ld\n",
+			PTR_ERR(mqs_priv->mclk));
+		goto out;
+	}
+
+	dev_set_drvdata(&pdev->dev, mqs_priv);
+	pm_runtime_enable(&pdev->dev);
+
+	return devm_snd_soc_register_component(&pdev->dev, &soc_codec_fsl_mqs,
+			&fsl_mqs_dai, 1);
+out:
+	if (!IS_ERR(gpr_np))
+		of_node_put(gpr_np);
+
+	return ret;
+}
+
+static int fsl_mqs_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsl_mqs_runtime_resume(struct device *dev)
+{
+	struct fsl_mqs *mqs_priv = dev_get_drvdata(dev);
+
+	if (mqs_priv->ipg)
+		clk_prepare_enable(mqs_priv->ipg);
+
+	if (mqs_priv->mclk)
+		clk_prepare_enable(mqs_priv->mclk);
+
+	if (mqs_priv->use_gpr)
+		regmap_write(mqs_priv->regmap, IOMUXC_GPR2,
+			     mqs_priv->reg_iomuxc_gpr2);
+	else
+		regmap_write(mqs_priv->regmap, REG_MQS_CTRL,
+			     mqs_priv->reg_mqs_ctrl);
+	return 0;
+}
+
+static int fsl_mqs_runtime_suspend(struct device *dev)
+{
+	struct fsl_mqs *mqs_priv = dev_get_drvdata(dev);
+
+	if (mqs_priv->use_gpr)
+		regmap_read(mqs_priv->regmap, IOMUXC_GPR2,
+			    &mqs_priv->reg_iomuxc_gpr2);
+	else
+		regmap_read(mqs_priv->regmap, REG_MQS_CTRL,
+			    &mqs_priv->reg_mqs_ctrl);
+
+	if (mqs_priv->mclk)
+		clk_disable_unprepare(mqs_priv->mclk);
+
+	if (mqs_priv->ipg)
+		clk_disable_unprepare(mqs_priv->ipg);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops fsl_mqs_pm_ops = {
+	SET_RUNTIME_PM_OPS(fsl_mqs_runtime_suspend,
+			   fsl_mqs_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static const struct of_device_id fsl_mqs_dt_ids[] = {
+	{ .compatible = "fsl,imx8qm-mqs", },
+	{ .compatible = "fsl,imx6sx-mqs", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsl_mqs_dt_ids);
+
+static struct platform_driver fsl_mqs_driver = {
+	.probe		= fsl_mqs_probe,
+	.remove		= fsl_mqs_remove,
+	.driver		= {
+		.name	= "fsl-mqs",
+		.of_match_table = fsl_mqs_dt_ids,
+		.pm = &fsl_mqs_pm_ops,
+	},
+};
+
+module_platform_driver(fsl_mqs_driver);
+
+MODULE_AUTHOR("Shengjiu Wang <Shengjiu.Wang@nxp.com>");
+MODULE_DESCRIPTION("MQS codec driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform: fsl-mqs");
-- 
2.21.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-11 14:42 [alsa-devel] [PATCH 1/2] ASoC: fsl_mqs: add DT binding documentation Shengjiu Wang
2019-09-11  6:31 ` Christophe Leroy
2019-09-11 10:03 ` Mark Brown
2019-09-11 14:42 ` [alsa-devel] [PATCH 2/2] ASoC: fsl_mqs: Add MQS component driver Shengjiu Wang
2019-09-11 10:12   ` Mark Brown

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org alsa-devel@archiver.kernel.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox