[PATCH 1/2] ASoC: tas2770: Fix calling reset in probe

[PATCH 1/2] ASoC: tas2770: Fix calling reset in probe

[Dan Murphy]

tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 sound/soc/codecs/tas2770.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index c09851834395..03d7ad1885b8 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -575,6 +575,8 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 
 	tas2770->component = component;
 
+	tas2770_reset(tas2770);
+
 	return 0;
 }
 
@@ -771,8 +773,6 @@ static int tas2770_i2c_probe(struct i2c_client *client,
 	tas2770->channel_size = 0;
 	tas2770->slot_width = 0;
 
-	tas2770_reset(tas2770);
-
 	result = tas2770_register_codec(tas2770);
 	if (result)
 		dev_err(tas2770->dev, "Register codec failed.\n");
-- 
2.28.0

[PATCH 2/2] ASoC: tas2770: Add missing bias level power states

[Dan Murphy]

Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the
driver will return -EINVAL which is not correct as they are valid
states.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 sound/soc/codecs/tas2770.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 03d7ad1885b8..7c6f61946ab3 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -57,7 +57,12 @@ static int tas2770_set_bias_level(struct snd_soc_component *component,
 			TAS2770_PWR_CTRL_MASK,
 			TAS2770_PWR_CTRL_ACTIVE);
 		break;
-
+	case SND_SOC_BIAS_STANDBY:
+	case SND_SOC_BIAS_PREPARE:
+		snd_soc_component_update_bits(component,
+			TAS2770_PWR_CTRL,
+			TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_MUTE);
+		break;
 	case SND_SOC_BIAS_OFF:
 		snd_soc_component_update_bits(component,
 			TAS2770_PWR_CTRL,
-- 
2.28.0

Re: [PATCH 1/2] ASoC: tas2770: Fix calling reset in probe

[Dan Murphy]

All

On 9/18/20 11:18 AM, Dan Murphy wrote:
> tas2770_reset is called during i2c probe. The reset calls the
> snd_soc_component_write which depends on the tas2770->component being
> available. The component pointer is not set until codec_probe so move
> the reset to the codec_probe after the pointer is set.

I have been updating the tas2770 to add another device to the driver and 
I have quite a few unexpected patches on top of these.

I am not even sure how this driver is even working at the moment.

I will re-submit the complete set of patches as Mark pointed out in 
another email chain.

So please ignore these patches for now plus the DT binding patch.

Dan