* Re: [REGRESSION] kbl-r5514-5663-max hdmi no longer working [not found] <CAJD_bPKQdtaExvVEKxhQ47G-ZXDA=k+gzhMJRHLBe=mysPnuKA@mail.gmail.com> @ 2023-03-13 17:32 ` Linux regression tracking (Thorsten Leemhuis) 2023-03-23 12:39 ` Thorsten Leemhuis 0 siblings, 1 reply; 2+ messages in thread From: Linux regression tracking (Thorsten Leemhuis) @ 2023-03-13 17:32 UTC (permalink / raw) To: Pierre-Louis Bossart Cc: Jason Montleon, stable, Linux regressions mailing list, Mark Brown, Alsa-devel, Takashi Iwai, Bard Liao [adding a push of people and lists to the recipients that dealt with the culprit; leaving the stable list in CC for now, even if this is a mainline issue (apart from the backport of the culprit to 5.10.y Takashi asked for a while ago)] On 13.03.23 17:34, Jason Montleon wrote: > It looks like HDMI audio stopped working in 5.17-rc1. I ran a bisect > which points to 636110411ca726f19ef8e87b0be51bb9a4cdef06. FWIW, that's "ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio" from Pierre-Louis Bossart. > I built > 5.17.14 with it reverted and it restored HDMI output, but it doesn't > revert cleanly from 5.18 onward. > >>From what I can tell it looks like -ENOTSUPP is returned from > snd_soc_dai_set_stream for hdmi1 and hdmi2 now. I'm not sure if that's > expected, but I made the following change and I have working HDMI > audio now. https://gist.github.com/jmontleon/4780154c309f956d97ca9a304a00da3f Thanks for the report and the patch. I CCed the relevant people for this. [TLDR For the rest of the mail: : I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.] To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot: #regzbot ^introduced 636110411ca726f19ef8e87b0be51bb9a4cdef06 #regzbot title alsa/asoc: kbl-r5514-5663-max hdmi stopped working #regzbot ignore-activity This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail. Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr That page also explains what to do if mails like this annoy you. ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [REGRESSION] kbl-r5514-5663-max hdmi no longer working 2023-03-13 17:32 ` [REGRESSION] kbl-r5514-5663-max hdmi no longer working Linux regression tracking (Thorsten Leemhuis) @ 2023-03-23 12:39 ` Thorsten Leemhuis 0 siblings, 0 replies; 2+ messages in thread From: Thorsten Leemhuis @ 2023-03-23 12:39 UTC (permalink / raw) To: Pierre-Louis Bossart Cc: Jason Montleon, stable, Linux regressions mailing list, Mark Brown, Alsa-devel, Takashi Iwai, Bard Liao On 13.03.23 18:32, Linux regression tracking (Thorsten Leemhuis) wrote: > [adding a push of people and lists to the recipients that dealt with the > culprit; leaving the stable list in CC for now, even if this is a > mainline issue (apart from the backport of the culprit to 5.10.y Takashi > asked for a while ago)] > > On 13.03.23 17:34, Jason Montleon wrote: >> It looks like HDMI audio stopped working in 5.17-rc1. I ran a bisect >> which points to 636110411ca726f19ef8e87b0be51bb9a4cdef06. > > FWIW, that's "ASoC: Intel/SOF: use set_stream() instead of > set_tdm_slots() for HDAudio" from Pierre-Louis Bossart. Pierre-Louis Bossart, did you find time to look into this? Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr If I did something stupid, please tell me, as explained on that page. #regzbot poke >> I built >> 5.17.14 with it reverted and it restored HDMI output, but it doesn't >> revert cleanly from 5.18 onward. >> >> >From what I can tell it looks like -ENOTSUPP is returned from >> snd_soc_dai_set_stream for hdmi1 and hdmi2 now. I'm not sure if that's >> expected, but I made the following change and I have working HDMI >> audio now. https://gist.github.com/jmontleon/4780154c309f956d97ca9a304a00da3f > > Thanks for the report and the patch. I CCed the relevant people for this. > > [TLDR For the rest of the mail: : I'm adding this report to the list of > tracked Linux kernel regressions; the text you find below is based on a > few templates paragraphs you might have encountered already in similar > form. See link in footer if these mails annoy you.] > > To be sure the issue doesn't fall through the cracks unnoticed, I'm > adding it to regzbot, the Linux kernel regression tracking bot: > > #regzbot ^introduced 636110411ca726f19ef8e87b0be51bb9a4cdef06 > #regzbot title alsa/asoc: kbl-r5514-5663-max hdmi stopped working > #regzbot ignore-activity > > This isn't a regression? This issue or a fix for it are already > discussed somewhere else? It was fixed already? You want to clarify when > the regression started to happen? Or point out I got the title or > something else totally wrong? Then just reply and tell me -- ideally > while also telling regzbot about it, as explained by the page listed in > the footer of this mail. > > Developers: When fixing the issue, remember to add 'Link:' tags pointing > to the report (the parent of this mail). See page linked in footer for > details. > > Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) > -- > Everything you wanna know about Linux kernel regression tracking: > https://linux-regtracking.leemhuis.info/about/#tldr > That page also explains what to do if mails like this annoy you. ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-03-23 12:41 UTC | newest] Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CAJD_bPKQdtaExvVEKxhQ47G-ZXDA=k+gzhMJRHLBe=mysPnuKA@mail.gmail.com> 2023-03-13 17:32 ` [REGRESSION] kbl-r5514-5663-max hdmi no longer working Linux regression tracking (Thorsten Leemhuis) 2023-03-23 12:39 ` Thorsten Leemhuis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).