All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stafford Horne <shorne@gmail.com>
To: QEMU Development <qemu-devel@nongnu.org>
Cc: Richard Henderson <rth@twiddle.net>,
	Openrisc <openrisc@lists.librecores.org>,
	Stafford Horne <shorne@gmail.com>
Subject: [Qemu-devel] [PATCH 4/5] openrisc: Initial SMP support
Date: Wed, 23 Aug 2017 14:57:12 +0900	[thread overview]
Message-ID: <b12db1e3daefa777fe0025c71ac30a816a126653.1503467674.git.shorne@gmail.com> (raw)
In-Reply-To: <cover.1503467674.git.shorne@gmail.com>
In-Reply-To: <cover.1503467674.git.shorne@gmail.com>

Wire in ompic and add basic support for SMP.  The OpenRISC is special in
that interrupts for devices are routed to each core's PIC.  This is
achieved using the qemu_irq_split utility, but this currently limits
OpenRISC to 2 cores.

This models the reference architecture described in the OpenRISC spec
1.2 proposal.

  https://github.com/stffrdhrn/doc/raw/arch-1.2-proposal/openrisc-arch-1.2-rev0.pdf

The changes to the intialization of the sim include:

CPU Reset
 o Reset each cpu to the bootstrap PC rather than only a single cpu as
   done before.
 o During Kernel loading the bootstrap PC is saved in a static global.

Network Initialization
 o Connect the interrupt to each CPU
 o Use more simple sysbus_mmio_map() rather than memory_region_add_subregion()

Sim Initialization
 o Initialize the pic and tick timer per cpu
 o Wire in the OMPIC if SMP is enabled
 o Wire the serial irq to each CPU using qemu_irq_split()

Signed-off-by: Stafford Horne <shorne@gmail.com>
---
 hw/openrisc/openrisc_sim.c | 84 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 61 insertions(+), 23 deletions(-)

diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c
index 44a657753d..f06a3e111b 100644
--- a/hw/openrisc/openrisc_sim.c
+++ b/hw/openrisc/openrisc_sim.c
@@ -35,36 +35,60 @@
 
 #define KERNEL_LOAD_ADDR 0x100
 
+static struct openrisc_boot_info {
+    uint32_t bootstrap_pc;
+} boot_info;
+
 static void main_cpu_reset(void *opaque)
 {
     OpenRISCCPU *cpu = opaque;
+    CPUState *cs = CPU(cpu);
 
     cpu_reset(CPU(cpu));
+
+    cpu_set_pc(cs, boot_info.bootstrap_pc);
 }
 
-static void openrisc_sim_net_init(MemoryRegion *address_space,
-                                  hwaddr base,
-                                  hwaddr descriptors,
-                                  qemu_irq irq, NICInfo *nd)
+static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
+                                  int num_cpus, qemu_irq **cpu_irqs,
+                                  int irq_pin, NICInfo *nd)
 {
     DeviceState *dev;
     SysBusDevice *s;
+    int i;
 
     dev = qdev_create(NULL, "open_eth");
     qdev_set_nic_properties(dev, nd);
     qdev_init_nofail(dev);
 
     s = SYS_BUS_DEVICE(dev);
-    sysbus_connect_irq(s, 0, irq);
-    memory_region_add_subregion(address_space, base,
-                                sysbus_mmio_get_region(s, 0));
-    memory_region_add_subregion(address_space, descriptors,
-                                sysbus_mmio_get_region(s, 1));
+    for (i = 0; i < num_cpus; i++) {
+        sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]);
+    }
+    sysbus_mmio_map(s, 0, base);
+    sysbus_mmio_map(s, 1, descriptors);
 }
 
-static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
-                                     const char *kernel_filename,
-                                     OpenRISCCPU *cpu)
+static void openrisc_sim_ompic_init(hwaddr base, int num_cpus,
+                                    qemu_irq **cpu_irqs, int irq_pin)
+{
+    DeviceState *dev;
+    SysBusDevice *s;
+    int i;
+
+    dev = qdev_create(NULL, "or1k-ompic");
+    qdev_prop_set_uint32(dev, "num-cpus", num_cpus);
+    qdev_init_nofail(dev);
+
+    s = SYS_BUS_DEVICE(dev);
+    for (i = 0; i < num_cpus; i++) {
+        sysbus_connect_irq(s, i, cpu_irqs[i][irq_pin]);
+    }
+    sysbus_mmio_map(s, 0, base);
+}
+
+static void openrisc_load_kernel(ram_addr_t ram_size,
+                                 const char *kernel_filename)
 {
     long kernel_size;
     uint64_t elf_entry;
@@ -83,6 +107,9 @@ static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
             kernel_size = load_image_targphys(kernel_filename,
                                               KERNEL_LOAD_ADDR,
                                               ram_size - KERNEL_LOAD_ADDR);
+        }
+
+        if (entry <= 0) {
             entry = KERNEL_LOAD_ADDR;
         }
 
@@ -91,7 +118,7 @@ static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
                     kernel_filename);
             exit(1);
         }
-        cpu->env.pc = entry;
+        boot_info.bootstrap_pc = entry;
     }
 }
 
@@ -102,6 +129,8 @@ static void openrisc_sim_init(MachineState *machine)
     const char *kernel_filename = machine->kernel_filename;
     OpenRISCCPU *cpu = NULL;
     MemoryRegion *ram;
+    qemu_irq *cpu_irqs[2];
+    qemu_irq serial_irq;
     int n;
 
     if (!cpu_model) {
@@ -117,33 +146,42 @@ static void openrisc_sim_init(MachineState *machine)
             fprintf(stderr, "Unable to find CPU definition!\n");
             exit(1);
         }
+        cpu_openrisc_pic_init(cpu);
+        cpu_irqs[n] = (qemu_irq *) cpu->env.irq;
+
+        cpu_openrisc_clock_init(cpu);
+
         qemu_register_reset(main_cpu_reset, cpu);
-        main_cpu_reset(cpu);
     }
 
     ram = g_malloc(sizeof(*ram));
     memory_region_init_ram(ram, NULL, "openrisc.ram", ram_size, &error_fatal);
     memory_region_add_subregion(get_system_memory(), 0, ram);
 
-    cpu_openrisc_pic_init(cpu);
-    cpu_openrisc_clock_init(cpu);
+    if (nd_table[0].used) {
+        openrisc_sim_net_init(0x92000000, 0x92000400, smp_cpus,
+                              cpu_irqs, 4, nd_table);
+    }
 
-    serial_mm_init(get_system_memory(), 0x90000000, 0, cpu->env.irq[2],
-                   115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
+    if (smp_cpus > 1) {
+        openrisc_sim_ompic_init(0x98000000, smp_cpus, cpu_irqs, 1);
 
-    if (nd_table[0].used) {
-        openrisc_sim_net_init(get_system_memory(), 0x92000000,
-                              0x92000400, cpu->env.irq[4], nd_table);
+        serial_irq = qemu_irq_split(cpu_irqs[0][2], cpu_irqs[1][2]);
+    } else {
+        serial_irq = cpu_irqs[0][2];
     }
 
-    cpu_openrisc_load_kernel(ram_size, kernel_filename, cpu);
+    serial_mm_init(get_system_memory(), 0x90000000, 0, serial_irq,
+                   115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
+
+    openrisc_load_kernel(ram_size, kernel_filename);
 }
 
 static void openrisc_sim_machine_init(MachineClass *mc)
 {
     mc->desc = "or1k simulation";
     mc->init = openrisc_sim_init;
-    mc->max_cpus = 1;
+    mc->max_cpus = 2;
     mc->is_default = 1;
 }
 
-- 
2.13.5

WARNING: multiple messages have this Message-ID (diff)
From: Stafford Horne <shorne@gmail.com>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [PATCH 4/5] openrisc: Initial SMP support
Date: Wed, 23 Aug 2017 14:57:12 +0900	[thread overview]
Message-ID: <b12db1e3daefa777fe0025c71ac30a816a126653.1503467674.git.shorne@gmail.com> (raw)
In-Reply-To: <cover.1503467674.git.shorne@gmail.com>

Wire in ompic and add basic support for SMP.  The OpenRISC is special in
that interrupts for devices are routed to each core's PIC.  This is
achieved using the qemu_irq_split utility, but this currently limits
OpenRISC to 2 cores.

This models the reference architecture described in the OpenRISC spec
1.2 proposal.

  https://github.com/stffrdhrn/doc/raw/arch-1.2-proposal/openrisc-arch-1.2-rev0.pdf

The changes to the intialization of the sim include:

CPU Reset
 o Reset each cpu to the bootstrap PC rather than only a single cpu as
   done before.
 o During Kernel loading the bootstrap PC is saved in a static global.

Network Initialization
 o Connect the interrupt to each CPU
 o Use more simple sysbus_mmio_map() rather than memory_region_add_subregion()

Sim Initialization
 o Initialize the pic and tick timer per cpu
 o Wire in the OMPIC if SMP is enabled
 o Wire the serial irq to each CPU using qemu_irq_split()

Signed-off-by: Stafford Horne <shorne@gmail.com>
---
 hw/openrisc/openrisc_sim.c | 84 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 61 insertions(+), 23 deletions(-)

diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c
index 44a657753d..f06a3e111b 100644
--- a/hw/openrisc/openrisc_sim.c
+++ b/hw/openrisc/openrisc_sim.c
@@ -35,36 +35,60 @@
 
 #define KERNEL_LOAD_ADDR 0x100
 
+static struct openrisc_boot_info {
+    uint32_t bootstrap_pc;
+} boot_info;
+
 static void main_cpu_reset(void *opaque)
 {
     OpenRISCCPU *cpu = opaque;
+    CPUState *cs = CPU(cpu);
 
     cpu_reset(CPU(cpu));
+
+    cpu_set_pc(cs, boot_info.bootstrap_pc);
 }
 
-static void openrisc_sim_net_init(MemoryRegion *address_space,
-                                  hwaddr base,
-                                  hwaddr descriptors,
-                                  qemu_irq irq, NICInfo *nd)
+static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
+                                  int num_cpus, qemu_irq **cpu_irqs,
+                                  int irq_pin, NICInfo *nd)
 {
     DeviceState *dev;
     SysBusDevice *s;
+    int i;
 
     dev = qdev_create(NULL, "open_eth");
     qdev_set_nic_properties(dev, nd);
     qdev_init_nofail(dev);
 
     s = SYS_BUS_DEVICE(dev);
-    sysbus_connect_irq(s, 0, irq);
-    memory_region_add_subregion(address_space, base,
-                                sysbus_mmio_get_region(s, 0));
-    memory_region_add_subregion(address_space, descriptors,
-                                sysbus_mmio_get_region(s, 1));
+    for (i = 0; i < num_cpus; i++) {
+        sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]);
+    }
+    sysbus_mmio_map(s, 0, base);
+    sysbus_mmio_map(s, 1, descriptors);
 }
 
-static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
-                                     const char *kernel_filename,
-                                     OpenRISCCPU *cpu)
+static void openrisc_sim_ompic_init(hwaddr base, int num_cpus,
+                                    qemu_irq **cpu_irqs, int irq_pin)
+{
+    DeviceState *dev;
+    SysBusDevice *s;
+    int i;
+
+    dev = qdev_create(NULL, "or1k-ompic");
+    qdev_prop_set_uint32(dev, "num-cpus", num_cpus);
+    qdev_init_nofail(dev);
+
+    s = SYS_BUS_DEVICE(dev);
+    for (i = 0; i < num_cpus; i++) {
+        sysbus_connect_irq(s, i, cpu_irqs[i][irq_pin]);
+    }
+    sysbus_mmio_map(s, 0, base);
+}
+
+static void openrisc_load_kernel(ram_addr_t ram_size,
+                                 const char *kernel_filename)
 {
     long kernel_size;
     uint64_t elf_entry;
@@ -83,6 +107,9 @@ static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
             kernel_size = load_image_targphys(kernel_filename,
                                               KERNEL_LOAD_ADDR,
                                               ram_size - KERNEL_LOAD_ADDR);
+        }
+
+        if (entry <= 0) {
             entry = KERNEL_LOAD_ADDR;
         }
 
@@ -91,7 +118,7 @@ static void cpu_openrisc_load_kernel(ram_addr_t ram_size,
                     kernel_filename);
             exit(1);
         }
-        cpu->env.pc = entry;
+        boot_info.bootstrap_pc = entry;
     }
 }
 
@@ -102,6 +129,8 @@ static void openrisc_sim_init(MachineState *machine)
     const char *kernel_filename = machine->kernel_filename;
     OpenRISCCPU *cpu = NULL;
     MemoryRegion *ram;
+    qemu_irq *cpu_irqs[2];
+    qemu_irq serial_irq;
     int n;
 
     if (!cpu_model) {
@@ -117,33 +146,42 @@ static void openrisc_sim_init(MachineState *machine)
             fprintf(stderr, "Unable to find CPU definition!\n");
             exit(1);
         }
+        cpu_openrisc_pic_init(cpu);
+        cpu_irqs[n] = (qemu_irq *) cpu->env.irq;
+
+        cpu_openrisc_clock_init(cpu);
+
         qemu_register_reset(main_cpu_reset, cpu);
-        main_cpu_reset(cpu);
     }
 
     ram = g_malloc(sizeof(*ram));
     memory_region_init_ram(ram, NULL, "openrisc.ram", ram_size, &error_fatal);
     memory_region_add_subregion(get_system_memory(), 0, ram);
 
-    cpu_openrisc_pic_init(cpu);
-    cpu_openrisc_clock_init(cpu);
+    if (nd_table[0].used) {
+        openrisc_sim_net_init(0x92000000, 0x92000400, smp_cpus,
+                              cpu_irqs, 4, nd_table);
+    }
 
-    serial_mm_init(get_system_memory(), 0x90000000, 0, cpu->env.irq[2],
-                   115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
+    if (smp_cpus > 1) {
+        openrisc_sim_ompic_init(0x98000000, smp_cpus, cpu_irqs, 1);
 
-    if (nd_table[0].used) {
-        openrisc_sim_net_init(get_system_memory(), 0x92000000,
-                              0x92000400, cpu->env.irq[4], nd_table);
+        serial_irq = qemu_irq_split(cpu_irqs[0][2], cpu_irqs[1][2]);
+    } else {
+        serial_irq = cpu_irqs[0][2];
     }
 
-    cpu_openrisc_load_kernel(ram_size, kernel_filename, cpu);
+    serial_mm_init(get_system_memory(), 0x90000000, 0, serial_irq,
+                   115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
+
+    openrisc_load_kernel(ram_size, kernel_filename);
 }
 
 static void openrisc_sim_machine_init(MachineClass *mc)
 {
     mc->desc = "or1k simulation";
     mc->init = openrisc_sim_init;
-    mc->max_cpus = 1;
+    mc->max_cpus = 2;
     mc->is_default = 1;
 }
 
-- 
2.13.5


  parent reply	other threads:[~2017-08-23  5:58 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-23  5:57 [Qemu-devel] [PATCH 0/5] OpenRISC SMP Support Stafford Horne
2017-08-23  5:57 ` [OpenRISC] " Stafford Horne
2017-08-23  5:57 ` [Qemu-devel] [PATCH 1/5] openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) Stafford Horne
2017-08-23  5:57   ` [OpenRISC] " Stafford Horne
2017-10-12 20:48   ` [Qemu-devel] " Richard Henderson
2017-10-12 20:48     ` [OpenRISC] " Richard Henderson
2017-08-23  5:57 ` [Qemu-devel] [PATCH 2/5] target/openrisc: Make coreid and numcores configurable in state Stafford Horne
2017-08-23  5:57   ` [OpenRISC] " Stafford Horne
2017-10-12 20:48   ` [Qemu-devel] " Richard Henderson
2017-10-12 20:48     ` [OpenRISC] " Richard Henderson
2017-08-23  5:57 ` [Qemu-devel] [PATCH 3/5] openrisc/cputimer: Perparation for Multicore Stafford Horne
2017-08-23  5:57   ` [OpenRISC] " Stafford Horne
2017-10-12 20:50   ` [Qemu-devel] " Richard Henderson
2017-10-12 20:50     ` [OpenRISC] " Richard Henderson
2017-08-23  5:57 ` Stafford Horne [this message]
2017-08-23  5:57   ` [OpenRISC] [PATCH 4/5] openrisc: Initial SMP support Stafford Horne
2017-10-12 21:28   ` [Qemu-devel] " Richard Henderson
2017-10-12 21:28     ` [OpenRISC] " Richard Henderson
2017-08-23  5:57 ` [Qemu-devel] [PATCH 5/5] openrisc: Only kick cpu on timeout, not on update Stafford Horne
2017-08-23  5:57   ` [OpenRISC] " Stafford Horne
2017-10-12 21:28   ` [Qemu-devel] " Richard Henderson
2017-10-12 21:28     ` [OpenRISC] " Richard Henderson
2017-10-07  0:21 ` [Qemu-devel] [PATCH 0/5] OpenRISC SMP Support Stafford Horne
2017-10-07  0:21   ` [OpenRISC] " Stafford Horne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b12db1e3daefa777fe0025c71ac30a816a126653.1503467674.git.shorne@gmail.com \
    --to=shorne@gmail.com \
    --cc=openrisc@lists.librecores.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.