From: Anshuman Khandual <anshuman.khandual@arm.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
linux-mm@kvack.org, akpm@linux-foundation.org
Cc: mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 08/16] debug_vm_pgtable/set_pmd: Don't use set_pmd_at to update an existing pmd entry
Date: Wed, 12 Aug 2020 18:16:04 +0530 [thread overview]
Message-ID: <b6d72a0a-3ded-016a-67fe-fe704818a0d5@arm.com> (raw)
In-Reply-To: <20200812063358.369514-8-aneesh.kumar@linux.ibm.com>
On 08/12/2020 12:03 PM, Aneesh Kumar K.V wrote:
> set_pmd_at() should not be used to set a pte entry at locations that
> already holds a valid pte entry. Architectures like ppc64 don't do TLB
> invalidate in set_pmd_at() and hence expect it to be used to set locations
> that are not a valid PTE.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/debug_vm_pgtable.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
> index cd609a212dd4..60bf876081b8 100644
> --- a/mm/debug_vm_pgtable.c
> +++ b/mm/debug_vm_pgtable.c
> @@ -164,8 +164,6 @@ static void __init pmd_advanced_tests(struct mm_struct *mm,
> pmd = READ_ONCE(*pmdp);
> WARN_ON(pmd_write(pmd));
>
> - pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> - set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_huge_get_and_clear(mm, vaddr, pmdp);
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!pmd_none(pmd));
> @@ -180,12 +178,11 @@ static void __init pmd_advanced_tests(struct mm_struct *mm,
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!(pmd_write(pmd) && pmd_dirty(pmd)));
>
> - pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> - set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_huge_get_and_clear_full(vma, vaddr, pmdp, 1);
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!pmd_none(pmd));
>
> + pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> pmd = pmd_mkyoung(pmd);
> set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_test_and_clear_young(vma, vaddr, pmdp);
>
Very similar to [PATCH 3/16] wrt set_pte_at(), please fold it.
WARNING: multiple messages have this Message-ID (diff)
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
linux-mm@kvack.org, akpm@linux-foundation.org
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 08/16] debug_vm_pgtable/set_pmd: Don't use set_pmd_at to update an existing pmd entry
Date: Wed, 12 Aug 2020 18:16:04 +0530 [thread overview]
Message-ID: <b6d72a0a-3ded-016a-67fe-fe704818a0d5@arm.com> (raw)
In-Reply-To: <20200812063358.369514-8-aneesh.kumar@linux.ibm.com>
On 08/12/2020 12:03 PM, Aneesh Kumar K.V wrote:
> set_pmd_at() should not be used to set a pte entry at locations that
> already holds a valid pte entry. Architectures like ppc64 don't do TLB
> invalidate in set_pmd_at() and hence expect it to be used to set locations
> that are not a valid PTE.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
> mm/debug_vm_pgtable.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
> index cd609a212dd4..60bf876081b8 100644
> --- a/mm/debug_vm_pgtable.c
> +++ b/mm/debug_vm_pgtable.c
> @@ -164,8 +164,6 @@ static void __init pmd_advanced_tests(struct mm_struct *mm,
> pmd = READ_ONCE(*pmdp);
> WARN_ON(pmd_write(pmd));
>
> - pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> - set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_huge_get_and_clear(mm, vaddr, pmdp);
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!pmd_none(pmd));
> @@ -180,12 +178,11 @@ static void __init pmd_advanced_tests(struct mm_struct *mm,
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!(pmd_write(pmd) && pmd_dirty(pmd)));
>
> - pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> - set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_huge_get_and_clear_full(vma, vaddr, pmdp, 1);
> pmd = READ_ONCE(*pmdp);
> WARN_ON(!pmd_none(pmd));
>
> + pmd = pmd_mkhuge(pfn_pmd(pfn, prot));
> pmd = pmd_mkyoung(pmd);
> set_pmd_at(mm, vaddr, pmdp, pmd);
> pmdp_test_and_clear_young(vma, vaddr, pmdp);
>
Very similar to [PATCH 3/16] wrt set_pte_at(), please fold it.
next prev parent reply other threads:[~2020-08-12 12:46 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-12 6:33 [PATCH 01/16] powerpc/mm: Add DEBUG_VM WARN for pmd_clear Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 02/16] debug_vm_pgtable/ppc64: Avoid setting top bits in radom value Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 6:40 ` Christophe Leroy
2020-08-12 6:43 ` Aneesh Kumar K.V
2020-08-12 8:12 ` Anshuman Khandual
2020-08-12 8:12 ` Anshuman Khandual
2020-08-12 8:25 ` Aneesh Kumar K.V
2020-08-12 8:25 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 03/16] debug_vm_pgtable/set_pte: Don't use set_pte_at to update an existing pte entry Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 9:12 ` Anshuman Khandual
2020-08-12 9:12 ` Anshuman Khandual
2020-08-12 9:22 ` Aneesh Kumar K.V
2020-08-12 9:22 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 04/16] debug_vm_pgtables/hugevmap: Use the arch helper to identify huge vmap support Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 10:30 ` Anshuman Khandual
2020-08-12 10:30 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 05/16] debug_vm_pgtable/savedwrite: Enable savedwrite test with CONFIG_NUMA_BALANCING Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 11:24 ` Anshuman Khandual
2020-08-12 11:24 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 06/16] debug_vm_pgtable/THP: Mark the pte entry huge before using set_pmd_at Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 07/16] debug_vm_pgtable/THP: Mark the pte entry huge before using set_pud_at Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 11:49 ` Anshuman Khandual
2020-08-12 11:49 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 08/16] debug_vm_pgtable/set_pmd: Don't use set_pmd_at to update an existing pmd entry Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 12:46 ` Anshuman Khandual [this message]
2020-08-12 12:46 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 09/16] debug_vm_pgtable/set_pud: Don't use set_pud_at to update an existing pud entry Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 12:46 ` Anshuman Khandual
2020-08-12 12:46 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 10/16] debug_vm_pgtable/thp: Use page table depost/withdraw with THP Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-13 5:25 ` Anshuman Khandual
2020-08-13 5:25 ` Anshuman Khandual
2020-08-13 6:38 ` Aneesh Kumar K.V
2020-08-13 6:38 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 11/16] debug_vm_pgtable/locks: Move non page table modifying test together Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 12/16] debug_vm_pgtable/locks: Take correct page table lock Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 13/16] debug_vm_pgtable/pmd_clear: Don't use pmd/pud_clear on pte entries Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-13 5:27 ` Anshuman Khandual
2020-08-13 5:27 ` Anshuman Khandual
2020-08-13 8:45 ` Aneesh Kumar K.V
2020-08-13 8:45 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 14/16] debug_vm_pgtable/hugetlb: Disable hugetlb test on ppc64 Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 13:03 ` Anshuman Khandual
2020-08-12 13:03 ` Anshuman Khandual
2020-08-12 13:16 ` Aneesh Kumar K.V
2020-08-12 13:16 ` Aneesh Kumar K.V
2020-08-12 13:34 ` Anshuman Khandual
2020-08-12 13:34 ` Anshuman Khandual
2020-08-12 13:52 ` Aneesh Kumar K.V
2020-08-12 13:52 ` Aneesh Kumar K.V
2020-08-14 8:43 ` Anshuman Khandual
2020-08-14 8:43 ` Anshuman Khandual
2020-08-19 6:54 ` Aneesh Kumar K.V
2020-08-19 6:54 ` Aneesh Kumar K.V
2020-08-12 6:33 ` [PATCH 15/16] debug_vm_pgtable/savedwrite: Use savedwrite test with protnone ptes Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-12 13:06 ` Anshuman Khandual
2020-08-12 13:06 ` Anshuman Khandual
2020-08-12 6:33 ` [PATCH 16/16] debug_vm_pgtable/ppc64: Add a variant of pfn_pte/pmd Aneesh Kumar K.V
2020-08-12 6:33 ` Aneesh Kumar K.V
2020-08-13 5:30 ` Anshuman Khandual
2020-08-13 5:30 ` Anshuman Khandual
2020-08-13 6:37 ` Aneesh Kumar K.V
2020-08-13 6:37 ` Aneesh Kumar K.V
2020-08-14 8:29 ` Anshuman Khandual
2020-08-14 8:29 ` Anshuman Khandual
2020-08-12 7:46 ` [PATCH 01/16] powerpc/mm: Add DEBUG_VM WARN for pmd_clear Anshuman Khandual
2020-08-12 7:46 ` Anshuman Khandual
2020-08-12 8:27 ` Aneesh Kumar K.V
2020-08-12 8:27 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b6d72a0a-3ded-016a-67fe-fe704818a0d5@arm.com \
--to=anshuman.khandual@arm.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.