BPF Archive on lore.kernel.org
 help / color / Atom feed
From: Jesper Dangaard Brouer <brouer@redhat.com>
To: bpf@vger.kernel.org
Cc: Jesper Dangaard Brouer <brouer@redhat.com>,
	netdev@vger.kernel.org, Daniel Borkmann <borkmann@iogearbox.net>,
	Alexei Starovoitov <alexei.starovoitov@gmail.com>,
	maze@google.com, lmb@cloudflare.com, shaun@tigera.io,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	marek@cloudflare.com, John Fastabend <john.fastabend@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>,
	eyal.birger@gmail.com, colrack@gmail.com
Subject: [PATCH bpf-next V11 4/7] bpf: add BPF-helper for MTU checking
Date: Tue, 12 Jan 2021 18:45:20 +0100
Message-ID: <161047352084.4003084.16468571234023057969.stgit@firesoul> (raw)
In-Reply-To: <161047346644.4003084.2653117664787086168.stgit@firesoul>

This BPF-helper bpf_check_mtu() works for both XDP and TC-BPF programs.

The SKB object is complex and the skb->len value (accessible from
BPF-prog) also include the length of any extra GRO/GSO segments, but
without taking into account that these GRO/GSO segments get added
transport (L4) and network (L3) headers before being transmitted. Thus,
this BPF-helper is created such that the BPF-programmer don't need to
handle these details in the BPF-prog.

The API is designed to help the BPF-programmer, that want to do packet
context size changes, which involves other helpers. These other helpers
usually does a delta size adjustment. This helper also support a delta
size (len_diff), which allow BPF-programmer to reuse arguments needed by
these other helpers, and perform the MTU check prior to doing any actual
size adjustment of the packet context.

It is on purpose, that we allow the len adjustment to become a negative
result, that will pass the MTU check. This might seem weird, but it's not
this helpers responsibility to "catch" wrong len_diff adjustments. Other
helpers will take care of these checks, if BPF-programmer chooses to do
actual size adjustment.

V9:
- Use dev->hard_header_len (instead of ETH_HLEN)
- Annotate with unlikely req from Daniel
- Fix logic error using skb_gso_validate_network_len from Daniel

V6:
- Took John's advice and dropped BPF_MTU_CHK_RELAX
- Returned MTU is kept at L3-level (like fib_lookup)

V4: Lot of changes
 - ifindex 0 now use current netdev for MTU lookup
 - rename helper from bpf_mtu_check to bpf_check_mtu
 - fix bug for GSO pkt length (as skb->len is total len)
 - remove __bpf_len_adj_positive, simply allow negative len adj

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
 include/uapi/linux/bpf.h       |   67 ++++++++++++++++++++++
 net/core/filter.c              |  122 ++++++++++++++++++++++++++++++++++++++++
 tools/include/uapi/linux/bpf.h |   67 ++++++++++++++++++++++
 3 files changed, 256 insertions(+)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 649586d656b6..fa2e99351758 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -3833,6 +3833,61 @@ union bpf_attr {
  *	Return
  *		A pointer to a struct socket on success or NULL if the file is
  *		not a socket.
+ *
+ * int bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
+ *	Description
+ *		Check ctx packet size against MTU of net device (based on
+ *		*ifindex*).  This helper will likely be used in combination with
+ *		helpers that adjust/change the packet size.  The argument
+ *		*len_diff* can be used for querying with a planned size
+ *		change. This allows to check MTU prior to changing packet ctx.
+ *
+ *		Specifying *ifindex* zero means the MTU check is performed
+ *		against the current net device.  This is practical if this isn't
+ *		used prior to redirect.
+ *
+ *		The Linux kernel route table can configure MTUs on a more
+ *		specific per route level, which is not provided by this helper.
+ *		For route level MTU checks use the **bpf_fib_lookup**\ ()
+ *		helper.
+ *
+ *		*ctx* is either **struct xdp_md** for XDP programs or
+ *		**struct sk_buff** for tc cls_act programs.
+ *
+ *		The *flags* argument can be a combination of one or more of the
+ *		following values:
+ *
+ *		**BPF_MTU_CHK_SEGS**
+ *			This flag will only works for *ctx* **struct sk_buff**.
+ *			If packet context contains extra packet segment buffers
+ *			(often knows as GSO skb), then MTU check is harder to
+ *			check at this point, because in transmit path it is
+ *			possible for the skb packet to get re-segmented
+ *			(depending on net device features).  This could still be
+ *			a MTU violation, so this flag enables performing MTU
+ *			check against segments, with a different violation
+ *			return code to tell it apart. Check cannot use len_diff.
+ *
+ *		On return *mtu_len* pointer contains the MTU value of the net
+ *		device.  Remember the net device configured MTU is the L3 size,
+ *		which is returned here and XDP and TX length operate at L2.
+ *		Helper take this into account for you, but remember when using
+ *		MTU value in your BPF-code.  On input *mtu_len* must be a valid
+ *		pointer and be initialized (to zero), else verifier will reject
+ *		BPF program.
+ *
+ *	Return
+ *		* 0 on success, and populate MTU value in *mtu_len* pointer.
+ *
+ *		* < 0 if any input argument is invalid (*mtu_len* not updated)
+ *
+ *		MTU violations return positive values, but also populate MTU
+ *		value in *mtu_len* pointer, as this can be needed for
+ *		implementing PMTU handing:
+ *
+ *		* **BPF_MTU_CHK_RET_FRAG_NEEDED**
+ *		* **BPF_MTU_CHK_RET_SEGS_TOOBIG**
+ *
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3998,6 +4053,7 @@ union bpf_attr {
 	FN(ktime_get_coarse_ns),	\
 	FN(ima_inode_hash),		\
 	FN(sock_from_file),		\
+	FN(check_mtu),			\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -5030,6 +5086,17 @@ struct bpf_redir_neigh {
 	};
 };
 
+/* bpf_check_mtu flags*/
+enum  bpf_check_mtu_flags {
+	BPF_MTU_CHK_SEGS  = (1U << 0),
+};
+
+enum bpf_check_mtu_ret {
+	BPF_MTU_CHK_RET_SUCCESS,      /* check and lookup successful */
+	BPF_MTU_CHK_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_MTU_CHK_RET_SEGS_TOOBIG,  /* GSO re-segmentation needed to fwd */
+};
+
 enum bpf_task_fd_type {
 	BPF_FD_TYPE_RAW_TRACEPOINT,	/* tp name */
 	BPF_FD_TYPE_TRACEPOINT,		/* tp name */
diff --git a/net/core/filter.c b/net/core/filter.c
index db59ab55572c..3f2e593244ca 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -5604,6 +5604,124 @@ static const struct bpf_func_proto bpf_skb_fib_lookup_proto = {
 	.arg4_type	= ARG_ANYTHING,
 };
 
+static struct net_device *__dev_via_ifindex(struct net_device *dev_curr,
+					    u32 ifindex)
+{
+	struct net *netns = dev_net(dev_curr);
+
+	/* Non-redirect use-cases can use ifindex=0 and save ifindex lookup */
+	if (ifindex == 0)
+		return dev_curr;
+
+	return dev_get_by_index_rcu(netns, ifindex);
+}
+
+BPF_CALL_5(bpf_skb_check_mtu, struct sk_buff *, skb,
+	   u32, ifindex, u32 *, mtu_len, s32, len_diff, u64, flags)
+{
+	int ret = BPF_MTU_CHK_RET_FRAG_NEEDED;
+	struct net_device *dev = skb->dev;
+	int skb_len, dev_len;
+	int mtu;
+
+	if (unlikely(flags & ~(BPF_MTU_CHK_SEGS)))
+		return -EINVAL;
+
+	dev = __dev_via_ifindex(dev, ifindex);
+	if (unlikely(!dev))
+		return -ENODEV;
+
+	mtu = READ_ONCE(dev->mtu);
+
+	dev_len = mtu + dev->hard_header_len;
+	skb_len = skb->len + len_diff; /* minus result pass check */
+	if (skb_len <= dev_len) {
+		ret = BPF_MTU_CHK_RET_SUCCESS;
+		goto out;
+	}
+	/* At this point, skb->len exceed MTU, but as it include length of all
+	 * segments, it can still be below MTU.  The SKB can possibly get
+	 * re-segmented in transmit path (see validate_xmit_skb).  Thus, user
+	 * must choose if segs are to be MTU checked.  Last SKB "headlen" is
+	 * checked against MTU.
+	 */
+	if (skb_is_gso(skb)) {
+		ret = BPF_MTU_CHK_RET_SUCCESS;
+
+		if (!(flags & BPF_MTU_CHK_SEGS))
+			goto out;
+
+		if (!skb_gso_validate_network_len(skb, mtu)) {
+			ret = BPF_MTU_CHK_RET_SEGS_TOOBIG;
+			goto out;
+		}
+
+		skb_len = skb_headlen(skb) + len_diff;
+		if (skb_len > dev_len) {
+			ret = BPF_MTU_CHK_RET_FRAG_NEEDED;
+			goto out;
+		}
+	}
+out:
+	/* BPF verifier guarantees valid pointer */
+	*mtu_len = mtu;
+
+	return ret;
+}
+
+BPF_CALL_5(bpf_xdp_check_mtu, struct xdp_buff *, xdp,
+	   u32, ifindex, u32 *, mtu_len, s32, len_diff, u64, flags)
+{
+	struct net_device *dev = xdp->rxq->dev;
+	int xdp_len = xdp->data_end - xdp->data;
+	int ret = BPF_MTU_CHK_RET_SUCCESS;
+	int mtu, dev_len;
+
+	/* XDP variant doesn't support multi-buffer segment check (yet) */
+	if (unlikely(flags))
+		return -EINVAL;
+
+	dev = __dev_via_ifindex(dev, ifindex);
+	if (unlikely(!dev))
+		return -ENODEV;
+
+	mtu = READ_ONCE(dev->mtu);
+
+	/* Add L2-header as dev MTU is L3 size */
+	dev_len = mtu + dev->hard_header_len;
+
+	xdp_len += len_diff; /* minus result pass check */
+	if (xdp_len > dev_len)
+		ret = BPF_MTU_CHK_RET_FRAG_NEEDED;
+
+	/* BPF verifier guarantees valid pointer */
+	*mtu_len = mtu;
+
+	return ret;
+}
+
+static const struct bpf_func_proto bpf_skb_check_mtu_proto = {
+	.func		= bpf_skb_check_mtu,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type      = ARG_PTR_TO_CTX,
+	.arg2_type      = ARG_ANYTHING,
+	.arg3_type      = ARG_PTR_TO_INT,
+	.arg4_type      = ARG_ANYTHING,
+	.arg5_type      = ARG_ANYTHING,
+};
+
+static const struct bpf_func_proto bpf_xdp_check_mtu_proto = {
+	.func		= bpf_xdp_check_mtu,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type      = ARG_PTR_TO_CTX,
+	.arg2_type      = ARG_ANYTHING,
+	.arg3_type      = ARG_PTR_TO_INT,
+	.arg4_type      = ARG_ANYTHING,
+	.arg5_type      = ARG_ANYTHING,
+};
+
 #if IS_ENABLED(CONFIG_IPV6_SEG6_BPF)
 static int bpf_push_seg6_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
 {
@@ -7173,6 +7291,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_get_socket_uid_proto;
 	case BPF_FUNC_fib_lookup:
 		return &bpf_skb_fib_lookup_proto;
+	case BPF_FUNC_check_mtu:
+		return &bpf_skb_check_mtu_proto;
 	case BPF_FUNC_sk_fullsock:
 		return &bpf_sk_fullsock_proto;
 	case BPF_FUNC_sk_storage_get:
@@ -7242,6 +7362,8 @@ xdp_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_xdp_adjust_tail_proto;
 	case BPF_FUNC_fib_lookup:
 		return &bpf_xdp_fib_lookup_proto;
+	case BPF_FUNC_check_mtu:
+		return &bpf_xdp_check_mtu_proto;
 #ifdef CONFIG_INET
 	case BPF_FUNC_sk_lookup_udp:
 		return &bpf_xdp_sk_lookup_udp_proto;
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 649586d656b6..fa2e99351758 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -3833,6 +3833,61 @@ union bpf_attr {
  *	Return
  *		A pointer to a struct socket on success or NULL if the file is
  *		not a socket.
+ *
+ * int bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
+ *	Description
+ *		Check ctx packet size against MTU of net device (based on
+ *		*ifindex*).  This helper will likely be used in combination with
+ *		helpers that adjust/change the packet size.  The argument
+ *		*len_diff* can be used for querying with a planned size
+ *		change. This allows to check MTU prior to changing packet ctx.
+ *
+ *		Specifying *ifindex* zero means the MTU check is performed
+ *		against the current net device.  This is practical if this isn't
+ *		used prior to redirect.
+ *
+ *		The Linux kernel route table can configure MTUs on a more
+ *		specific per route level, which is not provided by this helper.
+ *		For route level MTU checks use the **bpf_fib_lookup**\ ()
+ *		helper.
+ *
+ *		*ctx* is either **struct xdp_md** for XDP programs or
+ *		**struct sk_buff** for tc cls_act programs.
+ *
+ *		The *flags* argument can be a combination of one or more of the
+ *		following values:
+ *
+ *		**BPF_MTU_CHK_SEGS**
+ *			This flag will only works for *ctx* **struct sk_buff**.
+ *			If packet context contains extra packet segment buffers
+ *			(often knows as GSO skb), then MTU check is harder to
+ *			check at this point, because in transmit path it is
+ *			possible for the skb packet to get re-segmented
+ *			(depending on net device features).  This could still be
+ *			a MTU violation, so this flag enables performing MTU
+ *			check against segments, with a different violation
+ *			return code to tell it apart. Check cannot use len_diff.
+ *
+ *		On return *mtu_len* pointer contains the MTU value of the net
+ *		device.  Remember the net device configured MTU is the L3 size,
+ *		which is returned here and XDP and TX length operate at L2.
+ *		Helper take this into account for you, but remember when using
+ *		MTU value in your BPF-code.  On input *mtu_len* must be a valid
+ *		pointer and be initialized (to zero), else verifier will reject
+ *		BPF program.
+ *
+ *	Return
+ *		* 0 on success, and populate MTU value in *mtu_len* pointer.
+ *
+ *		* < 0 if any input argument is invalid (*mtu_len* not updated)
+ *
+ *		MTU violations return positive values, but also populate MTU
+ *		value in *mtu_len* pointer, as this can be needed for
+ *		implementing PMTU handing:
+ *
+ *		* **BPF_MTU_CHK_RET_FRAG_NEEDED**
+ *		* **BPF_MTU_CHK_RET_SEGS_TOOBIG**
+ *
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3998,6 +4053,7 @@ union bpf_attr {
 	FN(ktime_get_coarse_ns),	\
 	FN(ima_inode_hash),		\
 	FN(sock_from_file),		\
+	FN(check_mtu),			\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -5030,6 +5086,17 @@ struct bpf_redir_neigh {
 	};
 };
 
+/* bpf_check_mtu flags*/
+enum  bpf_check_mtu_flags {
+	BPF_MTU_CHK_SEGS  = (1U << 0),
+};
+
+enum bpf_check_mtu_ret {
+	BPF_MTU_CHK_RET_SUCCESS,      /* check and lookup successful */
+	BPF_MTU_CHK_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_MTU_CHK_RET_SEGS_TOOBIG,  /* GSO re-segmentation needed to fwd */
+};
+
 enum bpf_task_fd_type {
 	BPF_FD_TYPE_RAW_TRACEPOINT,	/* tp name */
 	BPF_FD_TYPE_TRACEPOINT,		/* tp name */



  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-12 17:45 [PATCH bpf-next V11 0/7] bpf: New approach for BPF MTU handling Jesper Dangaard Brouer
2021-01-12 17:45 ` [PATCH bpf-next V11 1/7] bpf: Remove MTU check in __bpf_skb_max_len Jesper Dangaard Brouer
2021-01-14  8:18   ` John Fastabend
2021-01-12 17:45 ` [PATCH bpf-next V11 2/7] bpf: fix bpf_fib_lookup helper MTU check for SKB ctx Jesper Dangaard Brouer
2021-01-12 17:45 ` [PATCH bpf-next V11 3/7] bpf: bpf_fib_lookup return MTU value as output when looked up Jesper Dangaard Brouer
2021-01-12 17:45 ` Jesper Dangaard Brouer [this message]
2021-01-12 19:23   ` [PATCH bpf-next V11 4/7] bpf: add BPF-helper for MTU checking Andrii Nakryiko
2021-01-14 14:52     ` Jesper Dangaard Brouer
2021-01-14 15:33       ` Yonghong Song
2021-01-13 23:07   ` Daniel Borkmann
2021-01-14 14:36     ` Jesper Dangaard Brouer
2021-01-14 22:28       ` Daniel Borkmann
2021-01-18 11:04         ` Jesper Dangaard Brouer
2021-01-12 17:45 ` [PATCH bpf-next V11 5/7] bpf: drop MTU check when doing TC-BPF redirect to ingress Jesper Dangaard Brouer
2021-01-14  9:03   ` John Fastabend
2021-01-14 16:14     ` Jesper Dangaard Brouer
2021-01-12 17:45 ` [PATCH bpf-next V11 6/7] selftests/bpf: use bpf_check_mtu in selftest test_cls_redirect Jesper Dangaard Brouer
2021-01-12 17:45 ` [PATCH bpf-next V11 7/7] bpf/selftests: tests using bpf_check_mtu BPF-helper Jesper Dangaard Brouer
2021-01-12 19:29   ` Andrii Nakryiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=161047352084.4003084.16468571234023057969.stgit@firesoul \
    --to=brouer@redhat.com \
    --cc=alexei.starovoitov@gmail.com \
    --cc=borkmann@iogearbox.net \
    --cc=bpf@vger.kernel.org \
    --cc=colrack@gmail.com \
    --cc=eyal.birger@gmail.com \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=lmb@cloudflare.com \
    --cc=lorenzo@kernel.org \
    --cc=marek@cloudflare.com \
    --cc=maze@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=shaun@tigera.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

BPF Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/bpf/0 bpf/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 bpf bpf/ https://lore.kernel.org/bpf \
		bpf@vger.kernel.org
	public-inbox-index bpf

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.bpf


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git