From: Florian Fainelli <f.fainelli@gmail.com> To: Ray Jui <ray.jui@broadcom.com>, Wolfram Sang <wsa@the-dreams.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Subject: Re: [PATCH v5 0/8] iProc I2C slave mode and NIC mode Date: Fri, 22 Mar 2019 09:40:36 -0700 [thread overview] Message-ID: <c06896b8-d3dc-2d3e-1d12-b2f2c2a09410@gmail.com> (raw) In-Reply-To: <5c5ed177-0e9e-6271-518c-6956a7a6c554@broadcom.com> On 2/22/19 12:04 PM, Ray Jui wrote: > Hi Wolfram, > > Rob has reviewed all DT binding related changes from this patch series. > Could you please help to review the I2C driver related changes when you > have time? Wolfram, did you queue those patches yet? The dt-binding patch has been reviewed by Rob, therefore I am going to queue up patch 8 for the ARM SoC pull request for 5.2. Let me know if that does not align with when you plan on sending the i2c changes, thanks! > > Thanks, > > Ray > > On 2/14/2019 9:57 AM, Ray Jui wrote: >> This patch series adds the following support to the iProc I2C driver: >> - Increase maximum read transfer size to 255 bytes >> - I2C slave mode >> - Polling mode >> - NIC I2C mode >> >> This patch series is based on kernel v5.0-rc3 and available at: >> https://github.com/Broadcom/arm64-linux.git >> branch: i2c-slave-v5 >> >> Changes from v4: >> - Add more detailed explanations in the device tree binding document >> changes, to address Rob's review comments >> >> Changes from v3: >> - Various minor fixes on commit messages and commits >> - Rebased to v5.0-rc3 >> >> Changes from v2: >> - Address Ray's review comments. >> >> Changes from v1: >> - Rebased to Linux v5.0.0-rc2 >> >> Ray Jui (1): >> dt-bindings: i2c: iproc: make 'interrupts' optional >> >> Rayagonda Kokatanur (5): >> i2c: iproc: add polling support >> i2c: iproc: use wrapper for read/write access >> dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string >> i2c: iproc: add NIC I2C support >> arm64: dts: Stingray: Add NIC i2c device node >> >> Shreesha Rajashekar (2): >> i2c: iproc: Extend I2C read up to 255 bytes >> i2c: iproc: Add slave mode support >> >> .../bindings/i2c/brcm,iproc-i2c.txt | 17 +- >> .../boot/dts/broadcom/stingray/stingray.dtsi | 18 + >> drivers/i2c/busses/Kconfig | 1 + >> drivers/i2c/busses/i2c-bcm-iproc.c | 758 +++++++++++++++--- >> 4 files changed, 663 insertions(+), 131 deletions(-) >> -- Florian
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com> To: Ray Jui <ray.jui@broadcom.com>, Wolfram Sang <wsa@the-dreams.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v5 0/8] iProc I2C slave mode and NIC mode Date: Fri, 22 Mar 2019 09:40:36 -0700 [thread overview] Message-ID: <c06896b8-d3dc-2d3e-1d12-b2f2c2a09410@gmail.com> (raw) In-Reply-To: <5c5ed177-0e9e-6271-518c-6956a7a6c554@broadcom.com> On 2/22/19 12:04 PM, Ray Jui wrote: > Hi Wolfram, > > Rob has reviewed all DT binding related changes from this patch series. > Could you please help to review the I2C driver related changes when you > have time? Wolfram, did you queue those patches yet? The dt-binding patch has been reviewed by Rob, therefore I am going to queue up patch 8 for the ARM SoC pull request for 5.2. Let me know if that does not align with when you plan on sending the i2c changes, thanks! > > Thanks, > > Ray > > On 2/14/2019 9:57 AM, Ray Jui wrote: >> This patch series adds the following support to the iProc I2C driver: >> - Increase maximum read transfer size to 255 bytes >> - I2C slave mode >> - Polling mode >> - NIC I2C mode >> >> This patch series is based on kernel v5.0-rc3 and available at: >> https://github.com/Broadcom/arm64-linux.git >> branch: i2c-slave-v5 >> >> Changes from v4: >> - Add more detailed explanations in the device tree binding document >> changes, to address Rob's review comments >> >> Changes from v3: >> - Various minor fixes on commit messages and commits >> - Rebased to v5.0-rc3 >> >> Changes from v2: >> - Address Ray's review comments. >> >> Changes from v1: >> - Rebased to Linux v5.0.0-rc2 >> >> Ray Jui (1): >> dt-bindings: i2c: iproc: make 'interrupts' optional >> >> Rayagonda Kokatanur (5): >> i2c: iproc: add polling support >> i2c: iproc: use wrapper for read/write access >> dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string >> i2c: iproc: add NIC I2C support >> arm64: dts: Stingray: Add NIC i2c device node >> >> Shreesha Rajashekar (2): >> i2c: iproc: Extend I2C read up to 255 bytes >> i2c: iproc: Add slave mode support >> >> .../bindings/i2c/brcm,iproc-i2c.txt | 17 +- >> .../boot/dts/broadcom/stingray/stingray.dtsi | 18 + >> drivers/i2c/busses/Kconfig | 1 + >> drivers/i2c/busses/i2c-bcm-iproc.c | 758 +++++++++++++++--- >> 4 files changed, 663 insertions(+), 131 deletions(-) >> -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-22 16:40 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-14 17:57 [PATCH v5 0/8] iProc I2C slave mode and NIC mode Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 1/8] i2c: iproc: Extend I2C read up to 255 bytes Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-03-27 22:17 ` Wolfram Sang 2019-03-27 22:17 ` Wolfram Sang 2019-04-01 21:35 ` Ray Jui 2019-04-01 21:35 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 2/8] i2c: iproc: Add slave mode support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-03-27 22:14 ` Wolfram Sang 2019-03-27 22:14 ` Wolfram Sang 2019-03-27 22:41 ` Wolfram Sang 2019-03-27 22:41 ` Wolfram Sang 2019-04-01 21:33 ` Ray Jui 2019-04-01 21:33 ` Ray Jui 2019-04-02 8:24 ` Rayagonda Kokatanur 2019-04-02 8:24 ` Rayagonda Kokatanur 2019-04-02 9:01 ` Wolfram Sang 2019-04-02 9:01 ` Wolfram Sang 2019-02-14 17:57 ` [PATCH v5 3/8] dt-bindings: i2c: iproc: make 'interrupts' optional Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 22:25 ` Rob Herring 2019-02-14 22:25 ` Rob Herring 2019-02-14 22:25 ` Rob Herring 2019-02-14 17:57 ` [PATCH v5 4/8] i2c: iproc: add polling support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 5/8] i2c: iproc: use wrapper for read/write access Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string Ray Jui 2019-02-14 17:57 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Ray Jui 2019-02-14 22:26 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Rob Herring 2019-02-14 22:26 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Rob Herring 2019-02-14 22:26 ` Rob Herring 2019-03-27 22:24 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Wolfram Sang 2019-03-27 22:24 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Wolfram Sang 2019-04-01 21:43 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Ray Jui 2019-04-01 21:43 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Ray Jui 2019-04-02 10:17 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Wolfram Sang 2019-04-02 10:17 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Wolfram Sang 2019-02-14 17:57 ` [PATCH v5 7/8] i2c: iproc: add NIC I2C support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-04-02 10:27 ` Wolfram Sang 2019-04-02 10:27 ` Wolfram Sang 2019-04-02 17:57 ` Ray Jui 2019-04-02 17:57 ` Ray Jui 2019-04-03 1:10 ` Ray Jui 2019-04-03 1:10 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 8/8] arm64: dts: Stingray: Add NIC i2c device node Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-22 20:04 ` [PATCH v5 0/8] iProc I2C slave mode and NIC mode Ray Jui 2019-02-22 20:04 ` Ray Jui 2019-03-22 16:40 ` Florian Fainelli [this message] 2019-03-22 16:40 ` Florian Fainelli 2019-03-27 22:27 ` Wolfram Sang 2019-03-27 22:27 ` Wolfram Sang 2019-04-01 21:44 ` Ray Jui 2019-04-01 21:44 ` Ray Jui
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=c06896b8-d3dc-2d3e-1d12-b2f2c2a09410@gmail.com \ --to=f.fainelli@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=ray.jui@broadcom.com \ --cc=rayagonda.kokatanur@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.