From: Alex Riesen <alexander.riesen@cetitec.com> To: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>, <devel@driverdev.osuosl.org>, <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org> Subject: [PATCH v2 07/10] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM) Date: Thu, 19 Mar 2020 18:42:36 +0100 [thread overview] Message-ID: <c9ff553f804f178a247dca356306948e971432fb.1584639664.git.alexander.riesen@cetitec.com> (raw) In-Reply-To: <cover.1584639664.git.alexander.riesen@cetitec.com> As the driver has some support for the audio interface of the device, the bindings file should mention it. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com> --- .../devicetree/bindings/media/i2c/adv748x.txt | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 4f91686e54a6..7d6db052c294 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -2,7 +2,9 @@ The ADV7481 and ADV7482 are multi format video decoders with an integrated HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB -from three input sources HDMI, analog and TTL. +from three input sources HDMI, analog and TTL. There is also support for an +I2S compatible interface connected to the audio processor of the HDMI decoder. +The interface has TDM capability (8 slots, 32 bits, left or right justified). Required Properties: @@ -16,6 +18,8 @@ Required Properties: slave device on the I2C bus. The main address is mandatory, others are optional and remain at default values if not specified. + - #clock-cells: must be <0> if the I2S port is used + Optional Properties: - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or @@ -47,6 +51,7 @@ are numbered as follows. TTL sink 9 TXA source 10 TXB source 11 + I2S source 12 The digital output port nodes, when present, shall contain at least one endpoint. Each of those endpoints shall contain the data-lanes property as @@ -72,6 +77,7 @@ Example: #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; interrupt-parent = <&gpio6>; interrupt-names = "intrq1", "intrq2"; @@ -113,4 +119,12 @@ Example: remote-endpoint = <&csi20_in>; }; }; + + port@c { + reg = <12>; + + adv7482_i2s: endpoint { + remote-endpoint = <&i2s_in>; + }; + }; }; -- 2.25.1.25.g9ecbe7eb18
WARNING: multiple messages have this Message-ID (diff)
From: Alex Riesen <alexander.riesen@cetitec.com> To: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Mark Rutland <mark.rutland@arm.com>, devel@driverdev.osuosl.org, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Geert Uytterhoeven <geert@linux-m68k.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, Mauro Carvalho Chehab <mchehab@kernel.org>, linux-media@vger.kernel.org Subject: [PATCH v2 07/10] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM) Date: Thu, 19 Mar 2020 18:42:36 +0100 [thread overview] Message-ID: <c9ff553f804f178a247dca356306948e971432fb.1584639664.git.alexander.riesen@cetitec.com> (raw) In-Reply-To: <cover.1584639664.git.alexander.riesen@cetitec.com> As the driver has some support for the audio interface of the device, the bindings file should mention it. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com> --- .../devicetree/bindings/media/i2c/adv748x.txt | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 4f91686e54a6..7d6db052c294 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -2,7 +2,9 @@ The ADV7481 and ADV7482 are multi format video decoders with an integrated HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB -from three input sources HDMI, analog and TTL. +from three input sources HDMI, analog and TTL. There is also support for an +I2S compatible interface connected to the audio processor of the HDMI decoder. +The interface has TDM capability (8 slots, 32 bits, left or right justified). Required Properties: @@ -16,6 +18,8 @@ Required Properties: slave device on the I2C bus. The main address is mandatory, others are optional and remain at default values if not specified. + - #clock-cells: must be <0> if the I2S port is used + Optional Properties: - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or @@ -47,6 +51,7 @@ are numbered as follows. TTL sink 9 TXA source 10 TXB source 11 + I2S source 12 The digital output port nodes, when present, shall contain at least one endpoint. Each of those endpoints shall contain the data-lanes property as @@ -72,6 +77,7 @@ Example: #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; interrupt-parent = <&gpio6>; interrupt-names = "intrq1", "intrq2"; @@ -113,4 +119,12 @@ Example: remote-endpoint = <&csi20_in>; }; }; + + port@c { + reg = <12>; + + adv7482_i2s: endpoint { + remote-endpoint = <&i2s_in>; + }; + }; }; -- 2.25.1.25.g9ecbe7eb18 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2020-03-19 17:42 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-19 17:41 [PATCH v2 00/10] media: adv748x: add support for HDMI audio Alex Riesen 2020-03-19 17:41 ` Alex Riesen 2020-03-19 17:41 ` [PATCH v2 01/10] media: adv748x: fix end-of-line terminators in diagnostic statements Alex Riesen 2020-03-19 17:41 ` Alex Riesen 2020-03-19 18:03 ` Laurent Pinchart 2020-03-19 18:03 ` Laurent Pinchart 2020-03-19 17:41 ` [PATCH v2 02/10] media: adv748x: include everything adv748x.h needs into the file Alex Riesen 2020-03-19 17:41 ` Alex Riesen 2020-03-19 17:48 ` Laurent Pinchart 2020-03-19 17:48 ` Laurent Pinchart 2020-03-20 8:23 ` Alex Riesen 2020-03-20 8:23 ` Alex Riesen 2020-03-19 17:41 ` [PATCH v2 03/10] media: adv748x: reduce amount of code for bitwise modifications of device registers Alex Riesen 2020-03-19 17:41 ` Alex Riesen 2020-03-19 18:06 ` Laurent Pinchart 2020-03-19 18:06 ` Laurent Pinchart 2020-03-20 9:08 ` Alex Riesen 2020-03-20 9:08 ` Alex Riesen 2020-03-19 17:41 ` [PATCH v2 04/10] media: adv748x: add definitions for audio output related registers Alex Riesen 2020-03-19 17:41 ` Alex Riesen 2020-03-19 17:42 ` [PATCH v2 05/10] media: adv748x: add support for HDMI audio Alex Riesen 2020-03-19 17:42 ` Alex Riesen 2020-03-20 8:43 ` Geert Uytterhoeven 2020-03-20 8:43 ` Geert Uytterhoeven 2020-03-20 8:57 ` Alex Riesen 2020-03-20 8:57 ` Alex Riesen 2020-03-20 9:10 ` Geert Uytterhoeven 2020-03-20 9:10 ` Geert Uytterhoeven 2020-03-20 10:58 ` Alex Riesen 2020-03-20 10:58 ` Alex Riesen 2020-03-20 11:05 ` Geert Uytterhoeven 2020-03-20 11:05 ` Geert Uytterhoeven 2020-03-20 11:11 ` Alex Riesen 2020-03-20 11:11 ` Alex Riesen 2020-03-19 17:42 ` [PATCH v2 06/10] media: adv748x: only activate DAI if it is described in device tree Alex Riesen 2020-03-19 17:42 ` Alex Riesen 2020-03-19 17:42 ` Alex Riesen [this message] 2020-03-19 17:42 ` [PATCH v2 07/10] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM) Alex Riesen 2020-03-19 18:01 ` Laurent Pinchart 2020-03-19 18:01 ` Laurent Pinchart 2020-03-20 8:44 ` Alex Riesen 2020-03-20 8:44 ` Alex Riesen 2020-03-20 8:48 ` Geert Uytterhoeven 2020-03-20 8:48 ` Geert Uytterhoeven 2020-03-20 9:03 ` Alex Riesen 2020-03-20 9:03 ` Alex Riesen 2020-03-20 9:15 ` Geert Uytterhoeven 2020-03-20 9:15 ` Geert Uytterhoeven 2020-03-20 9:18 ` Alex Riesen 2020-03-20 9:18 ` Alex Riesen 2020-03-20 9:59 ` Laurent Pinchart 2020-03-20 9:59 ` Laurent Pinchart 2020-03-20 16:15 ` Alex Riesen 2020-03-20 16:15 ` Alex Riesen 2020-03-19 17:42 ` [PATCH v2 08/10] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC Alex Riesen 2020-03-19 17:42 ` Alex Riesen 2020-03-23 0:12 ` Kuninori Morimoto 2020-03-23 0:12 ` Kuninori Morimoto 2020-03-23 7:35 ` Alex Riesen 2020-03-23 7:35 ` Alex Riesen 2020-03-19 17:42 ` [PATCH v2 09/10] media: adv748x: add support for log_status ioctl Alex Riesen 2020-03-19 17:42 ` Alex Riesen 2020-03-19 17:43 ` [PATCH v2 10/10] media: adv748x: allow the HDMI sub-device to accept EDID Alex Riesen 2020-03-19 17:43 ` Alex Riesen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=c9ff553f804f178a247dca356306948e971432fb.1584639664.git.alexander.riesen@cetitec.com \ --to=alexander.riesen@cetitec.com \ --cc=devel@driverdev.osuosl.org \ --cc=devicetree@vger.kernel.org \ --cc=geert@linux-m68k.org \ --cc=hverkuil-cisco@xs4all.nl \ --cc=kieran.bingham@ideasonboard.com \ --cc=kuninori.morimoto.gx@renesas.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mchehab@kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.