dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/3] dmaengine: bindings/edma: dma-channel-mask to array
@ 2019-09-26 11:19 Peter Ujfalusi
  2019-09-26 11:19 ` [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Peter Ujfalusi @ 2019-09-26 11:19 UTC (permalink / raw)
  To: vkoul, robh+dt; +Cc: dmaengine, linux-kernel, dan.j.williams, devicetree

Hi,

Changes since v2:
- Fix dma-common.yaml documentation patch and extend the description of the
  dma-channel-mask array
- The edma documentation now includes information on the dma-channel-mask array
  size for EDMAs with 32 or 64 channels

Changes since v1:
- Extend the common dma-channel-mask to uint32-array to be usable for
  controllers with more than 32 channels
- Use the dma-channel-mask instead custom property for available channels for
  EDMA.

The original patch was part of the EDMA multicore usage series.

Rob: I'm not sure if I got the dma-common.yaml update correctly...

EDMAs can have 32 or 64 channels depending on the SoC, the dma-channel-mask
needs to be an array to be usable for the driver.

Regards,
Peter
---
Peter Ujfalusi (3):
  dt-bindings: dmaengine: dma-common: Change dma-channel-mask to
    uint32-array
  dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
  dmaengine: ti: edma: Add support for handling reserved channels

 .../devicetree/bindings/dma/dma-common.yaml   |  9 ++-
 .../devicetree/bindings/dma/ti-edma.txt       |  8 +++
 drivers/dma/ti/edma.c                         | 59 +++++++++++++++++--
 3 files changed, 69 insertions(+), 7 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array
  2019-09-26 11:19 [PATCH v3 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
@ 2019-09-26 11:19 ` Peter Ujfalusi
  2019-09-27 20:25   ` Rob Herring
  2019-09-26 11:19 ` [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
  2019-09-26 11:19 ` [PATCH v3 3/3] dmaengine: ti: edma: Add support for handling reserved channels Peter Ujfalusi
  2 siblings, 1 reply; 7+ messages in thread
From: Peter Ujfalusi @ 2019-09-26 11:19 UTC (permalink / raw)
  To: vkoul, robh+dt; +Cc: dmaengine, linux-kernel, dan.j.williams, devicetree

Make the dma-channel-mask to be usable for controllers with more than 32
channels.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 Documentation/devicetree/bindings/dma/dma-common.yaml | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index ed0a49a6f020..4527f20301ff 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -25,11 +25,18 @@ properties:
       Used to provide DMA controller specific information.
 
   dma-channel-mask:
-    $ref: /schemas/types.yaml#definitions/uint32
     description:
       Bitmask of available DMA channels in ascending order that are
       not reserved by firmware and are available to the
       kernel. i.e. first channel corresponds to LSB.
+      The first item in the array is for channels 0-31, the second is for
+      channels 32-63, etc.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 1
+          # Should be enough
+          maxItems: 255
 
   dma-channels:
     $ref: /schemas/types.yaml#definitions/uint32
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
  2019-09-26 11:19 [PATCH v3 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
  2019-09-26 11:19 ` [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
@ 2019-09-26 11:19 ` Peter Ujfalusi
  2019-09-27 20:48   ` Rob Herring
  2019-09-26 11:19 ` [PATCH v3 3/3] dmaengine: ti: edma: Add support for handling reserved channels Peter Ujfalusi
  2 siblings, 1 reply; 7+ messages in thread
From: Peter Ujfalusi @ 2019-09-26 11:19 UTC (permalink / raw)
  To: vkoul, robh+dt; +Cc: dmaengine, linux-kernel, dan.j.williams, devicetree

Similarly to paRAM slots, channels can be used by other cores.

The common dma-channel-mask property can be used for specifying the
available channels.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 Documentation/devicetree/bindings/dma/ti-edma.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 4bbc94d829c8..014187088020 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -42,6 +42,11 @@ Optional properties:
 - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
 		the driver, they are allocated to be used by for example the
 		DSP. See example.
+- dma-channel-mask: Mask of usable channels.
+		Single uint32 for EDMA with 32 channels, array of two uint32 for
+		EDMA with 64 channels. See example and
+		Documentation/devicetree/bindings/dma/dma-common.yaml
+
 
 ------------------------------------------------------------------------------
 eDMA3 Transfer Controller
@@ -91,6 +96,9 @@ edma: edma@49000000 {
 	ti,edma-memcpy-channels = <20 21>;
 	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
 	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
+	/* The following channels are reserved: 35-44 */
+	dma-channel-mask = <0xffffffff>, /* Channel 0-31 */
+			   <0xffffe007>; /* Channel 32-63 */
 };
 
 edma_tptc0: tptc@49800000 {
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 3/3] dmaengine: ti: edma: Add support for handling reserved channels
  2019-09-26 11:19 [PATCH v3 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
  2019-09-26 11:19 ` [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
  2019-09-26 11:19 ` [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
@ 2019-09-26 11:19 ` Peter Ujfalusi
  2 siblings, 0 replies; 7+ messages in thread
From: Peter Ujfalusi @ 2019-09-26 11:19 UTC (permalink / raw)
  To: vkoul, robh+dt; +Cc: dmaengine, linux-kernel, dan.j.williams, devicetree

Like paRAM slots, channels could be used by other cores and in this case
we need to make sure that the driver do not alter these channels.

Handle the generic dma-channel-mask property to mark channels in a bitmap
which can not be used by Linux and convert the legacy rsv_chans if it is
provided by platform_data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti/edma.c | 59 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index ba7c4f07fcd6..03c9c6296006 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -260,6 +260,13 @@ struct edma_cc {
 	 */
 	unsigned long *slot_inuse;
 
+	/*
+	 * For tracking reserved channels used by DSP.
+	 * If the bit is cleared, the channel is allocated to be used by DSP
+	 * and Linux must not touch it.
+	 */
+	unsigned long *channels_mask;
+
 	struct dma_device		dma_slave;
 	struct dma_device		*dma_memcpy;
 	struct edma_chan		*slave_chans;
@@ -716,6 +723,12 @@ static int edma_alloc_channel(struct edma_chan *echan,
 	struct edma_cc *ecc = echan->ecc;
 	int channel = EDMA_CHAN_SLOT(echan->ch_num);
 
+	if (!test_bit(echan->ch_num, ecc->channels_mask)) {
+		dev_err(ecc->dev, "Channel%d is reserved, can not be used!\n",
+			echan->ch_num);
+		return -EINVAL;
+	}
+
 	/* ensure access through shadow region 0 */
 	edma_or_array2(ecc, EDMA_DRAE, 0, EDMA_REG_ARRAY_INDEX(channel),
 		       EDMA_CHANNEL_BIT(channel));
@@ -2250,7 +2263,7 @@ static int edma_probe(struct platform_device *pdev)
 	struct edma_soc_info	*info = pdev->dev.platform_data;
 	s8			(*queue_priority_mapping)[2];
 	int			i, off;
-	const s16		(*rsv_slots)[2];
+	const s16		(*reserved)[2];
 	const s16		(*xbar_chans)[2];
 	int			irq;
 	char			*irq_name;
@@ -2331,15 +2344,32 @@ static int edma_probe(struct platform_device *pdev)
 	if (!ecc->slot_inuse)
 		return -ENOMEM;
 
+	ecc->channels_mask = devm_kcalloc(dev,
+					   BITS_TO_LONGS(ecc->num_channels),
+					   sizeof(unsigned long), GFP_KERNEL);
+	if (!ecc->channels_mask)
+		return -ENOMEM;
+
+	/* Mark all channels available initially */
+	bitmap_fill(ecc->channels_mask, ecc->num_channels);
+
 	ecc->default_queue = info->default_queue;
 
 	if (info->rsv) {
 		/* Set the reserved slots in inuse list */
-		rsv_slots = info->rsv->rsv_slots;
-		if (rsv_slots) {
-			for (i = 0; rsv_slots[i][0] != -1; i++)
-				bitmap_set(ecc->slot_inuse, rsv_slots[i][0],
-					   rsv_slots[i][1]);
+		reserved = info->rsv->rsv_slots;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_set(ecc->slot_inuse, reserved[i][0],
+					   reserved[i][1]);
+		}
+
+		/* Clear channels not usable for Linux */
+		reserved = info->rsv->rsv_chans;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_clear(ecc->channels_mask, reserved[i][0],
+					     reserved[i][1]);
 		}
 	}
 
@@ -2399,6 +2429,7 @@ static int edma_probe(struct platform_device *pdev)
 
 	if (!ecc->legacy_mode) {
 		int lowest_priority = 0;
+		unsigned int array_max;
 		struct of_phandle_args tc_args;
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
@@ -2420,6 +2451,18 @@ static int edma_probe(struct platform_device *pdev)
 				info->default_queue = i;
 			}
 		}
+
+		/* See if we have optional dma-channel-mask array */
+		array_max = DIV_ROUND_UP(ecc->num_channels, BITS_PER_TYPE(u32));
+		ret = of_property_read_variable_u32_array(node,
+						"dma-channel-mask",
+						(u32 *)ecc->channels_mask,
+						1, array_max);
+		if (ret > 0 && ret != array_max)
+			dev_warn(dev, "dma-channel-mask is not complete.\n");
+		else if (ret == -EOVERFLOW || ret == -ENODATA)
+			dev_warn(dev,
+				 "dma-channel-mask is out of range or empty\n");
 	}
 
 	/* Event queue priority mapping */
@@ -2437,6 +2480,10 @@ static int edma_probe(struct platform_device *pdev)
 	edma_dma_init(ecc, legacy_mode);
 
 	for (i = 0; i < ecc->num_channels; i++) {
+		/* Do not touch reserved channels */
+		if (!test_bit(i, ecc->channels_mask))
+			continue;
+
 		/* Assign all channels to the default queue */
 		edma_assign_channel_eventq(&ecc->slave_chans[i],
 					   info->default_queue);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array
  2019-09-26 11:19 ` [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
@ 2019-09-27 20:25   ` Rob Herring
  0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2019-09-27 20:25 UTC (permalink / raw)
  To: Peter Ujfalusi; +Cc: vkoul, dmaengine, linux-kernel, dan.j.williams, devicetree

On Thu, Sep 26, 2019 at 02:19:52PM +0300, Peter Ujfalusi wrote:
> Make the dma-channel-mask to be usable for controllers with more than 32
> channels.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  Documentation/devicetree/bindings/dma/dma-common.yaml | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
> index ed0a49a6f020..4527f20301ff 100644
> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
> @@ -25,11 +25,18 @@ properties:
>        Used to provide DMA controller specific information.
>  
>    dma-channel-mask:
> -    $ref: /schemas/types.yaml#definitions/uint32
>      description:
>        Bitmask of available DMA channels in ascending order that are
>        not reserved by firmware and are available to the
>        kernel. i.e. first channel corresponds to LSB.
> +      The first item in the array is for channels 0-31, the second is for
> +      channels 32-63, etc.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +        items:
> +          minItems: 1
> +          # Should be enough
> +          maxItems: 255

'items' has to be a separate sub-schema from $ref to have any effect:

    allOf:
      - $ref: /schemas/types.yaml#/definitions/uint32-array                                                        
    items:
      minItems: 1
      # Should be enough
      maxItems: 255

Or (note the added '-'):

    allOf:                                                                                                            
      - $ref: /schemas/types.yaml#/definitions/uint32-array                                                           
      - items:                                                                                                            
          minItems: 1                                                                                                     
          # Should be enough                                                                                              
          maxItems: 255                                                                                                   

The first way is my preference.

Rob

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
  2019-09-26 11:19 ` [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
@ 2019-09-27 20:48   ` Rob Herring
  2019-09-30 10:55     ` Peter Ujfalusi
  0 siblings, 1 reply; 7+ messages in thread
From: Rob Herring @ 2019-09-27 20:48 UTC (permalink / raw)
  To: Peter Ujfalusi; +Cc: vkoul, dmaengine, linux-kernel, dan.j.williams, devicetree

On Thu, Sep 26, 2019 at 02:19:53PM +0300, Peter Ujfalusi wrote:
> Similarly to paRAM slots, channels can be used by other cores.
> 
> The common dma-channel-mask property can be used for specifying the
> available channels.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  Documentation/devicetree/bindings/dma/ti-edma.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 4bbc94d829c8..014187088020 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -42,6 +42,11 @@ Optional properties:
>  - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
>  		the driver, they are allocated to be used by for example the
>  		DSP. See example.
> +- dma-channel-mask: Mask of usable channels.
> +		Single uint32 for EDMA with 32 channels, array of two uint32 for
> +		EDMA with 64 channels. See example and
> +		Documentation/devicetree/bindings/dma/dma-common.yaml
> +
>  
>  ------------------------------------------------------------------------------
>  eDMA3 Transfer Controller
> @@ -91,6 +96,9 @@ edma: edma@49000000 {
>  	ti,edma-memcpy-channels = <20 21>;
>  	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
>  	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
> +	/* The following channels are reserved: 35-44 */
> +	dma-channel-mask = <0xffffffff>, /* Channel 0-31 */
> +			   <0xffffe007>; /* Channel 32-63 */

Doesn't matter yet, but you have a mismatch here with the schema. While 
the <> around each int or not doesn't matter for the dtb, it does for 
the schema.

dma-channel-mask = <0xffffffff>, <0xffffe007>;
minItems: 1
maxItems: 255

dma-channel-mask = <0xffffffff 0xffffe007>;
items:
  minItems: 1
  maxItems: 255

I think the latter case is slightly more logical here as you have 1 
thing (a mask). If had N of something (like interrupts), then the former 
makes sense. 

Rob

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
  2019-09-27 20:48   ` Rob Herring
@ 2019-09-30 10:55     ` Peter Ujfalusi
  0 siblings, 0 replies; 7+ messages in thread
From: Peter Ujfalusi @ 2019-09-30 10:55 UTC (permalink / raw)
  To: Rob Herring; +Cc: vkoul, dmaengine, linux-kernel, dan.j.williams, devicetree



On 27/09/2019 23.48, Rob Herring wrote:
> On Thu, Sep 26, 2019 at 02:19:53PM +0300, Peter Ujfalusi wrote:
>> Similarly to paRAM slots, channels can be used by other cores.
>>
>> The common dma-channel-mask property can be used for specifying the
>> available channels.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>>  Documentation/devicetree/bindings/dma/ti-edma.txt | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
>> index 4bbc94d829c8..014187088020 100644
>> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
>> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
>> @@ -42,6 +42,11 @@ Optional properties:
>>  - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
>>  		the driver, they are allocated to be used by for example the
>>  		DSP. See example.
>> +- dma-channel-mask: Mask of usable channels.
>> +		Single uint32 for EDMA with 32 channels, array of two uint32 for
>> +		EDMA with 64 channels. See example and
>> +		Documentation/devicetree/bindings/dma/dma-common.yaml
>> +
>>  
>>  ------------------------------------------------------------------------------
>>  eDMA3 Transfer Controller
>> @@ -91,6 +96,9 @@ edma: edma@49000000 {
>>  	ti,edma-memcpy-channels = <20 21>;
>>  	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
>>  	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
>> +	/* The following channels are reserved: 35-44 */
>> +	dma-channel-mask = <0xffffffff>, /* Channel 0-31 */
>> +			   <0xffffe007>; /* Channel 32-63 */
> 
> Doesn't matter yet, but you have a mismatch here with the schema. While 
> the <> around each int or not doesn't matter for the dtb, it does for 
> the schema.
> 
> dma-channel-mask = <0xffffffff>, <0xffffe007>;
> minItems: 1
> maxItems: 255
> 
> dma-channel-mask = <0xffffffff 0xffffe007>;
> items:
>   minItems: 1
>   maxItems: 255
> 
> I think the latter case is slightly more logical here as you have 1 
> thing (a mask). If had N of something (like interrupts), then the former 
> makes sense.

So, in dma-common.yaml:
    allOf:
      - $ref: /schemas/types.yaml#/definitions/uint32-array

    items:
      minItems: 1
      # Should be enough
      maxItems: 255

and here in the example:
	dma-channel-mask = <0xffffffff /* Channel 0-31 */
			    0xffffe007>; /* Channel 32-63 */

I'll send an updated series with these changes.

Thanks,
- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-26 11:19 [PATCH v3 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
2019-09-26 11:19 ` [PATCH v3 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
2019-09-27 20:25   ` Rob Herring
2019-09-26 11:19 ` [PATCH v3 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
2019-09-27 20:48   ` Rob Herring
2019-09-30 10:55     ` Peter Ujfalusi
2019-09-26 11:19 ` [PATCH v3 3/3] dmaengine: ti: edma: Add support for handling reserved channels Peter Ujfalusi

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org dmaengine@archiver.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/ public-inbox