[PATCH AUTOSEL 4.19 308/671] dmaengine: axi-dmac: Don't check the number of frames for alignment

[PATCH AUTOSEL 4.19 308/671] dmaengine: axi-dmac: Don't check the number of frames for alignment

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 648865a79d8ee3d1aa64aab5eb2a9d12eeed14f9 ]

In 2D transfers (for the AXI DMAC), the number of frames (numf) represents
Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful
for video transfers where screen resolutions ( X * Y ) are typically
aligned for X, but not for Y.

There is no requirement for Y_LENGTH to be aligned to the bus-width (or
anything), and this is also true for AXI DMAC.

Checking the Y_LENGTH for alignment causes false errors when initiating DMA
transfers. This change fixes this by checking only that the Y_LENGTH is
non-zero.

Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dma-axi-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index 15b2453d2647..b2c755b74bea 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -486,7 +486,7 @@ static struct dma_async_tx_descriptor *axi_dmac_prep_interleaved(
 
 	if (chan->hw_2d) {
 		if (!axi_dmac_check_len(chan, xt->sgl[0].size) ||
-		    !axi_dmac_check_len(chan, xt->numf))
+		    xt->numf == 0)
 			return NULL;
 		if (xt->sgl[0].size + dst_icg > chan->max_length ||
 		    xt->sgl[0].size + src_icg > chan->max_length)
-- 
2.20.1

[PATCH AUTOSEL 4.19 334/671] dmaengine: tegra210-adma: restore channel status

[Sasha Levin]

From: Sameer Pujar <spujar@nvidia.com>

[ Upstream commit f33e7bb3eb922618612a90f0a828c790e8880773 ]

Status of ADMA channel registers is not saved and restored during system
suspend. During active playback if system enters suspend, this results in
wrong state of channel registers during system resume and playback fails
to resume properly. Fix this by saving following channel registers in
runtime suspend and restore during runtime resume.
 * ADMA_CH_LOWER_SRC_ADDR
 * ADMA_CH_LOWER_TRG_ADDR
 * ADMA_CH_FIFO_CTRL
 * ADMA_CH_CONFIG
 * ADMA_CH_CTRL
 * ADMA_CH_CMD
 * ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback
or capture needs to be resumed. Hence above changes work fine for system
suspend case.

Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra210-adma.c | 46 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 09b6756366c3..ac2a6b800db3 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -98,6 +98,7 @@ struct tegra_adma_chan_regs {
 	unsigned int src_addr;
 	unsigned int trg_addr;
 	unsigned int fifo_ctrl;
+	unsigned int cmd;
 	unsigned int tc;
 };
 
@@ -127,6 +128,7 @@ struct tegra_adma_chan {
 	enum dma_transfer_direction	sreq_dir;
 	unsigned int			sreq_index;
 	bool				sreq_reserved;
+	struct tegra_adma_chan_regs	ch_regs;
 
 	/* Transfer count and position info */
 	unsigned int			tx_buf_count;
@@ -635,8 +637,30 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
 static int tegra_adma_runtime_suspend(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int i;
 
 	tdma->global_cmd = tdma_read(tdma, ADMA_GLOBAL_CMD);
+	if (!tdma->global_cmd)
+		goto clk_disable;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		ch_reg->cmd = tdma_ch_read(tdc, ADMA_CH_CMD);
+		/* skip if channel is not active */
+		if (!ch_reg->cmd)
+			continue;
+		ch_reg->tc = tdma_ch_read(tdc, ADMA_CH_TC);
+		ch_reg->src_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_SRC_ADDR);
+		ch_reg->trg_addr = tdma_ch_read(tdc, ADMA_CH_LOWER_TRG_ADDR);
+		ch_reg->ctrl = tdma_ch_read(tdc, ADMA_CH_CTRL);
+		ch_reg->fifo_ctrl = tdma_ch_read(tdc, ADMA_CH_FIFO_CTRL);
+		ch_reg->config = tdma_ch_read(tdc, ADMA_CH_CONFIG);
+	}
+
+clk_disable:
 	clk_disable_unprepare(tdma->ahub_clk);
 
 	return 0;
@@ -645,7 +669,9 @@ static int tegra_adma_runtime_suspend(struct device *dev)
 static int tegra_adma_runtime_resume(struct device *dev)
 {
 	struct tegra_adma *tdma = dev_get_drvdata(dev);
-	int ret;
+	struct tegra_adma_chan_regs *ch_reg;
+	struct tegra_adma_chan *tdc;
+	int ret, i;
 
 	ret = clk_prepare_enable(tdma->ahub_clk);
 	if (ret) {
@@ -654,6 +680,24 @@ static int tegra_adma_runtime_resume(struct device *dev)
 	}
 	tdma_write(tdma, ADMA_GLOBAL_CMD, tdma->global_cmd);
 
+	if (!tdma->global_cmd)
+		return 0;
+
+	for (i = 0; i < tdma->nr_channels; i++) {
+		tdc = &tdma->channels[i];
+		ch_reg = &tdc->ch_regs;
+		/* skip if channel was not active earlier */
+		if (!ch_reg->cmd)
+			continue;
+		tdma_ch_write(tdc, ADMA_CH_TC, ch_reg->tc);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_SRC_ADDR, ch_reg->src_addr);
+		tdma_ch_write(tdc, ADMA_CH_LOWER_TRG_ADDR, ch_reg->trg_addr);
+		tdma_ch_write(tdc, ADMA_CH_CTRL, ch_reg->ctrl);
+		tdma_ch_write(tdc, ADMA_CH_FIFO_CTRL, ch_reg->fifo_ctrl);
+		tdma_ch_write(tdc, ADMA_CH_CONFIG, ch_reg->config);
+		tdma_ch_write(tdc, ADMA_CH_CMD, ch_reg->cmd);
+	}
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 367/671] dmaengine: tegra210-adma: Fix crash during probe

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit b53611fb1ce9b1786bd18205473e0c1d6bfa8934 ]

Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")
added support to save and restore the DMA channel registers when runtime
suspending the ADMA. This change is causing the kernel to crash when
probing the ADMA, if the device is probed deferred when looking up the
channel interrupts. The crash occurs because not all of the channel base
addresses have been setup at this point and in the clean-up path of the
probe, pm_runtime_suspend() is called invoking its callback which
expects all the channel base addresses to be initialised.

Although this could be fixed by simply checking for a NULL address, on
further review of the driver it seems more appropriate that we only call
pm_runtime_get_sync() after all the channel interrupts and base
addresses have been configured. Therefore, fix this crash by moving the
calls to pm_runtime_enable(), pm_runtime_get_sync() and
tegra_adma_init() after the DMA channels have been initialised.

Fixes: f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra210-adma.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index ac2a6b800db3..4f4733d831a1 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -744,16 +744,6 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		return PTR_ERR(tdma->ahub_clk);
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
-		goto rpm_disable;
-
-	ret = tegra_adma_init(tdma);
-	if (ret)
-		goto rpm_put;
-
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < tdma->nr_channels; i++) {
 		struct tegra_adma_chan *tdc = &tdma->channels[i];
@@ -771,6 +761,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		tdc->tdma = tdma;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto rpm_disable;
+
+	ret = tegra_adma_init(tdma);
+	if (ret)
+		goto rpm_put;
+
 	dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
@@ -812,13 +812,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 dma_remove:
 	dma_async_device_unregister(&tdma->dma_dev);
-irq_dispose:
-	while (--i >= 0)
-		irq_dispose_mapping(tdma->channels[i].irq);
 rpm_put:
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
+irq_dispose:
+	while (--i >= 0)
+		irq_dispose_mapping(tdma->channels[i].irq);
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 433/671] dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit c24a5c735f87d0549060de31367c095e8810b895 ]

The commit

  080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")

has been mistakenly submitted. The further investigations show that
the original code does better job since the memory side transfer size
has never been configured by DMA users.

As per latest revision of documentation: "Channel minimum transfer size
(CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and
minimum value that can be programmed is 1."

This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16.

Fixes: 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/hsu/hsu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/hsu/hsu.c b/drivers/dma/hsu/hsu.c
index 202ffa9f7611..18f155a974db 100644
--- a/drivers/dma/hsu/hsu.c
+++ b/drivers/dma/hsu/hsu.c
@@ -64,10 +64,10 @@ static void hsu_dma_chan_start(struct hsu_dma_chan *hsuc)
 
 	if (hsuc->direction == DMA_MEM_TO_DEV) {
 		bsr = config->dst_maxburst;
-		mtsr = config->src_addr_width;
+		mtsr = config->dst_addr_width;
 	} else if (hsuc->direction == DMA_DEV_TO_MEM) {
 		bsr = config->src_maxburst;
-		mtsr = config->dst_addr_width;
+		mtsr = config->src_addr_width;
 	}
 
 	hsu_chan_disable(hsuc);
-- 
2.20.1

[PATCH AUTOSEL 4.19 501/671] dmaengine: dw: platform: Switch to acpi_dma_controller_register()

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit e7b8514e4d68bec21fc6385fa0a66797ddc34ac9 ]

There is a possibility to have registered ACPI DMA controller
while it has been gone already.

To avoid the potential crash, move to non-managed
acpi_dma_controller_register().

Fixes: 42c91ee71d6d ("dw_dmac: add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190820131546.75744-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dw/platform.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index c299ff181bb6..62218ea0894c 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -87,13 +87,20 @@ static void dw_dma_acpi_controller_register(struct dw_dma *dw)
 	dma_cap_set(DMA_SLAVE, info->dma_cap);
 	info->filter_fn = dw_dma_acpi_filter;
 
-	ret = devm_acpi_dma_controller_register(dev, acpi_dma_simple_xlate,
-						info);
+	ret = acpi_dma_controller_register(dev, acpi_dma_simple_xlate, info);
 	if (ret)
 		dev_err(dev, "could not register acpi_dma_controller\n");
 }
+
+static void dw_dma_acpi_controller_free(struct dw_dma *dw)
+{
+	struct device *dev = dw->dma.dev;
+
+	acpi_dma_controller_free(dev);
+}
 #else /* !CONFIG_ACPI */
 static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {}
+static inline void dw_dma_acpi_controller_free(struct dw_dma *dw) {}
 #endif /* !CONFIG_ACPI */
 
 #ifdef CONFIG_OF
@@ -249,6 +256,9 @@ static int dw_remove(struct platform_device *pdev)
 {
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
+	if (ACPI_HANDLE(&pdev->dev))
+		dw_dma_acpi_controller_free(chip->dw);
+
 	if (pdev->dev.of_node)
 		of_dma_controller_free(pdev->dev.of_node);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 597/671] dmaengine: imx-sdma: fix size check for sdma script_number

[Sasha Levin]

From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ]

Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3
(41) exceed the size of structure sdma_script_start_addrs(40),
thus cause memory corrupt such as slob block header so that kernel
trap into while() loop forever in slob_free(). Please refer to below
code piece in imx-sdma.c:
for (i = 0; i < sdma->script_number; i++)
	if (addr_arr[i] > 0)
		saddr_arr[i] = addr_arr[i]; /* memory corrupt here */
That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add
support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3
(38->41 3 scripts added) not align with script number added in
sdma_script_start_addrs(2 scripts).

Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware")
Cc: stable@vger.kernel
Link: https://www.spinics.net/lists/arm-kernel/msg754895.html
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Jurgen Lambrecht <J.Lambrecht@TELEVIC.com>
Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com
[vkoul: update the patch title]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-sdma.c                     | 8 ++++++++
 include/linux/platform_data/dma-imx-sdma.h | 3 +++
 2 files changed, 11 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3f5a01cb4ab4..ceb82e74f5b4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1662,6 +1662,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	if (!sdma->script_number)
 		sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
 
+	if (sdma->script_number > sizeof(struct sdma_script_start_addrs)
+				  / sizeof(s32)) {
+		dev_err(sdma->dev,
+			"SDMA script number %d not match with firmware.\n",
+			sdma->script_number);
+		return;
+	}
+
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53cef0bd..30e676b36b24 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,7 +51,10 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
+	s32 mcu_2_zqspi_addr;
+	/* End of v4 array */
 };
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.19 609/671] ioat: ioat_alloc_ring() failure handling.

[Sasha Levin]

From: "Alexander.Barabash@dell.com" <Alexander.Barabash@dell.com>

[ Upstream commit b0b5ce1010ffc50015eaec72b0028aaae3f526bb ]

If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring
allocation must not proceed.

Until now, if the first call to dma_alloc_coherent() in
ioat_alloc_ring() returned NULL, the processing could proceed, failing
with NULL-pointer dereferencing further down the line.

Signed-off-by: Alexander Barabash <alexander.barabash@dell.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ioat/dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 23fb2fa04000..b94cece58b98 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -388,10 +388,11 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 		descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
 						 SZ_2M, &descs->hw, flags);
-		if (!descs->virt && (i > 0)) {
+		if (!descs->virt) {
 			int idx;
 
 			for (idx = 0; idx < i; idx++) {
+				descs = &ioat_chan->descs[idx];
 				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
 						  descs->virt, descs->hw);
 				descs->virt = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 657/671] dmaengine: ti: edma: fix missed failure handling

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 340049d453682a9fe8d91fe794dd091730f4bb25 ]

When devm_kcalloc fails, it forgets to call edma_free_slot.
Replace direct return with failure handler to fix it.

Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 982631d4e1f8..44158fa85973 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2345,8 +2345,10 @@ static int edma_probe(struct platform_device *pdev)
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
 					    sizeof(*ecc->tc_list), GFP_KERNEL);
-		if (!ecc->tc_list)
-			return -ENOMEM;
+		if (!ecc->tc_list) {
+			ret = -ENOMEM;
+			goto err_reg1;
+		}
 
 		for (i = 0;; i++) {
 			ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
-- 
2.20.1