dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
  2021-07-14 10:20 ` [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script Robin Gong
@ 2021-07-14  8:17   ` Lucas Stach
  0 siblings, 0 replies; 18+ messages in thread
From: Lucas Stach @ 2021-07-14  8:17 UTC (permalink / raw)
  To: Robin Gong, vkoul, mark.rutland, broonie, robh+dt,
	catalin.marinas, will.deacon, shawnguo, festevam, s.hauer,
	martin.fuzzey, u.kleine-koenig, dan.j.williams,
	matthias.schiffer, frieder.schrempf, m.felsch, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Am Mittwoch, dem 14.07.2021 um 18:20 +0800 schrieb Robin Gong:
> Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
> is ram script and it's loaded or not, so that could prevent meaningless
> following malloc dma descriptor and bd allocate in sdma_transfer_init(),
> otherwise memory may be consumed out potentially without free in case
> that spi fallback into pio while dma transfer failed by sdma firmware not
> ready(next ERR009165 patch depends on sdma RAM scripts/firmware).
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> Acked-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/dma/imx-sdma.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 665ccbf..d366198 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -435,6 +435,7 @@ struct sdma_channel {
>  	enum dma_status			status;
>  	struct imx_dma_data		data;
>  	struct work_struct		terminate_worker;
> +	bool				is_ram_script;
>  };
>  
>  #define IMX_DMA_SG_LOOP		BIT(0)
> @@ -498,6 +499,7 @@ struct sdma_engine {
>  	struct sdma_buffer_descriptor	*bd0;
>  	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
>  	bool				clk_ratio;
> +	bool                            fw_loaded;
>  };
>  
>  static int sdma_config_write(struct dma_chan *chan,
> @@ -918,6 +920,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  	sdmac->pc_to_device = 0;
>  	sdmac->device_to_device = 0;
>  	sdmac->pc_to_pc = 0;
> +	sdmac->is_ram_script = false;
>  
>  	switch (peripheral_type) {
>  	case IMX_DMATYPE_MEMORY:
> @@ -953,6 +956,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  	case IMX_DMATYPE_SSI_DUAL:
>  		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
>  		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
> +		sdmac->is_ram_script = true;
>  		break;
>  	case IMX_DMATYPE_SSI_SP:
>  	case IMX_DMATYPE_MMC:
> @@ -967,6 +971,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  		per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
>  		emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
>  		per_2_per = sdma->script_addrs->per_2_per_addr;
> +		sdmac->is_ram_script = true;
>  		break;
>  	case IMX_DMATYPE_ASRC_SP:
>  		per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
> @@ -1363,6 +1368,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
>  {
>  	struct sdma_desc *desc;
>  
> +	if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
> +		dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
> +		goto err_out;
> +	}
> +
>  	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
>  	if (!desc)
>  		goto err_out;
> @@ -1792,6 +1802,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
>  
>  	sdma_add_scripts(sdma, addr);
>  
> +	sdma->fw_loaded = true;
> +
>  	dev_info(sdma->dev, "loaded firmware %d.%d\n",
>  			header->version_major,
>  			header->version_minor);



^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  2021-07-14 10:20 ` [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 " Robin Gong
@ 2021-07-14  8:17   ` Lucas Stach
  0 siblings, 0 replies; 18+ messages in thread
From: Lucas Stach @ 2021-07-14  8:17 UTC (permalink / raw)
  To: Robin Gong, vkoul, mark.rutland, broonie, robh+dt,
	catalin.marinas, will.deacon, shawnguo, festevam, s.hauer,
	martin.fuzzey, u.kleine-koenig, dan.j.williams,
	matthias.schiffer, frieder.schrempf, m.felsch, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Am Mittwoch, dem 14.07.2021 um 18:20 +0800 schrieb Robin Gong:
> ECSPI issue fixed from i.mx6ul at hardware level, no need
> ERR009165 anymore on those chips such as i.mx8mq.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> Acked-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/dma/imx-sdma.c | 26 ++++++++++++++++++++++++--
>  1 file changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 5969df8..cfcd413 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -476,6 +476,13 @@ struct sdma_driver_data {
>  	int num_events;
>  	struct sdma_script_start_addrs	*script_addrs;
>  	bool check_ratio;
> +	/*
> +	 * ecspi ERR009165 fixed should be done in sdma script
> +	 * and it has been fixed in soc from i.mx6ul.
> +	 * please get more information from the below link:
> +	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
> +	 */
> +	bool ecspi_fixed;
>  };
>  
>  struct sdma_engine {
> @@ -596,6 +603,13 @@ static struct sdma_driver_data sdma_imx6q = {
>  	.script_addrs = &sdma_script_imx6q,
>  };
>  
> +static struct sdma_driver_data sdma_imx6ul = {
> +	.chnenbl0 = SDMA_CHNENBL0_IMX35,
> +	.num_events = 48,
> +	.script_addrs = &sdma_script_imx6q,
> +	.ecspi_fixed = true,
> +};
> +
>  static struct sdma_script_start_addrs sdma_script_imx7d = {
>  	.ap_2_ap_addr = 644,
>  	.uart_2_mcu_addr = 819,
> @@ -629,6 +643,7 @@ static const struct of_device_id sdma_dt_ids[] = {
>  	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
>  	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
>  	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
> +	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
>  	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
>  	{ /* sentinel */ }
>  };
> @@ -948,8 +963,15 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>  		break;
>  	case IMX_DMATYPE_CSPI:
>  		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
> -		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
> -		sdmac->is_ram_script = true;
> +
> +		/* Use rom script mcu_2_app if ERR009165 fixed */
> +		if (sdmac->sdma->drvdata->ecspi_fixed) {
> +			emi_2_per = sdma->script_addrs->mcu_2_app_addr;
> +		} else {
> +			emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
> +			sdmac->is_ram_script = true;
> +		}
> +
>  		break;
>  	case IMX_DMATYPE_EXT:
>  	case IMX_DMATYPE_SSI:



^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
@ 2021-07-14  9:05 ` Lucas Stach
  2021-07-20 12:22   ` Vinod Koul
  2021-07-14 10:20 ` [PATCH v16 01/12] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Robin Gong
                   ` (12 subsequent siblings)
  13 siblings, 1 reply; 18+ messages in thread
From: Lucas Stach @ 2021-07-14  9:05 UTC (permalink / raw)
  To: Robin Gong, vkoul, broonie, shawnguo
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel, mark.rutland, robh+dt,
	catalin.marinas, will.deacon, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, xiaoning.wang

Hi Vinod, Mark, Shawn,

with this revision I think this series is ready to be picked up, at
least I couldn't spot any blockers anymore.

How would you like to deal with this? While the complete series is
needed to fix the issues and restore proper DMA functionality on
unaffected SoCs, there are no dependencies between the patches
targeting different subsystems.
Do you prefer to pick dma/spi/dt patches from this series in your
respective trees, or do you want the whole series to go through the imx
tree? AFAICS all dma and spi patches are already acked, so taking them
through one tree would be possible, I think.

Regards,
Lucas

Am Mittwoch, dem 14.07.2021 um 18:20 +0800 schrieb Robin Gong:
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
> or not.
> The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
> 
> PS:
>    Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
> 
> v2:
>   1.Add commit log for reverted patches.
>   2.Add comment for 'ecspi_fixed' in sdma driver.
>   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>     rather than remove.
> v3:
>   1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
>     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
>     Correct dts related dts patch in v2.
>   2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
>     in spi-imx driver to state ERR009165 fixed or not.
>   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
>     errata workaroud, thus improve performance as possible.
> v4:
>   1.Add Ack tag from Mark and Vinod
>   2.Remove checking 'event_id1' zero as 'event_id0'.
> v5:
>   1.Add the last patch for compatible with the current uart driver which
>     using rom script, so both uart ram script and rom script supported
>     in latest firmware, by default uart rom script used. UART driver
>     will be broken without this patch.
> v6:
>   1.Resend after rebase the latest next branch.
>   2.Remove below No.13~No.15 patches of v5 because they were mergered.
>   	ARM: dts: imx6ul: add dma support on ecspi
>   	ARM: dts: imx6sll: correct sdma compatible
>   	arm64: defconfig: Enable SDMA on i.mx8mq/8mm
>   3.Revert "dmaengine: imx-sdma: fix context cache" since
>     'context_loaded' removed.
> v7:
>   1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context
>     cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine
>     to load context only once" so that no building waring during comes out
>     during bisect.
>   2.Address Sascha's comments, including eliminating any i.mx6sx in this
>     series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking
>     care SMC bit for PIO.
>   3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
>    'spi: imx: add new i.mx6ul compatible name in binding doc'
> v8:
>   1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge
>     it into 04/13 of v7
>   2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any
>     ecspi function broken even if sdma firmware not updated.
>   3.merge 'tx.dst_maxburst' changes in the two continous patches into one
>     patch to avoid confusion.
>   4.fix typo 'duplicated'.
> v9:
>   1. add "spi: imx: add dma_sync_sg_for_device after fallback from dma"
>      to fix the potential issue brought by commit bcd8e7761ec9("spi: imx:
>      fallback to PIO if dma setup failure") which is the only one patch
>      of v8 merged. Thanks Matthias for reporting:
>      https://lore.kernel.org/linux-arm-kernel/5d246dd81607bb6e5cb9af86ad4e53f7a7a99c50.camel@ew.tq-group.com/
>   2. remove 05/13 of v8 "spi: imx:fallback to PIO if dma setup failure"
>      since it's been merged.
> v10:
>   1. remove 01/13 "spi: imx: add dma_sync_sg_for_device after fallback from dma"
>      since there is another independent patch merged:
>      -- commit 809b1b04df898 ("spi: introduce fallback to pio")
>   2. add "dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script" which
>      is used to fix the potential dma_alloc_coherent() failure while this
>      patchset applied but sdma firmware may not be ready for long time.
>   3. burst size change back from fifo size to normal wml to align with nxp
>      internal tree which has been test for years. Overnight with loopback
>      test with spidev failed with fifo size, but pass with wml(half of fifo
>      size).Seems the whole fifo size fed may cause rxfifo overflow during
>      tx shift out while rx shift in.
>      "spi: imx: remove ERR009165 workaround on i.mx6ul"
>   4. remove 12/13 'dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm'
>      since below two similar patches merged:
>      -- commit 25962e1a7f1d ("dmaengine: imx-sdma: Fix the event id check to
>      include RX event for UART6")
>      -- commit 2f57b8d57673 ("dmaengine: imx-sdma: Fix: Remove 'always true'
>      comparison")
> v11:
>   1. change dev_err() to dev_warn_once() in case sdma firmware not loaded to
>      eliminate meaningless duplicate log print.
> v12:
>   1. take care uart_2_mcu_addr/uartsh_2_mcu_addr since such rom scripts are
>      now located in the bottom part of sdma_script_start_addrs which are beyond
>      the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1. Reported by Frieder as below:
>      https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2263544.html
> v13:
>   1. rebase with latest linux-next.
>   2. remove 09/12 'spi: imx: add new i.mx6ul compatible name in binding doc'
>      since it's been converted to yaml already.
>   3. add 'Fixes', 'Cc: stable@vger.kernel.org' and 'Test-by' tags for 03,04
>      since they are confirmed fix by Richard Leitner:
>      https://lkml.org/lkml/2020/8/17/39
>      https://www.spinics.net/lists/dmaengine/msg23489.html
>   4. fix potential descriptor free unexpected on the next transfer before
>      the last channel terminated:
>      https://www.spinics.net/lists/dmaengine/msg23400.html
> v14:
>   1. rebase with latest linux-next.
> 
> v15:
>   1. reuse IMX51_ECSPI type instead of new IMX6UL_ECSPI driver.
>   2. use mcu_2_app rom script directly instead of ram script on i.mx6ul.
> 
> v16:
>   1. move 'sdmac->is_ram_script = false' from sdma_config_write() to
>      sdma_get_pc() for addressing Lucas's concern.
> 
> Robin Gong (12):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove duplicated sdma_load_context
>   dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
>   dmaengine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dma: imx-sdma: add i.mx6ul compatible name
>   dmaengine: imx-sdma: add uart rom script
>   dmaengine: imx-sdma: add terminated list for freed descriptor in
>     worker
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  1 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
>  drivers/dma/imx-sdma.c                             | 93 ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 41 ++++++++--
>  5 files changed, 111 insertions(+), 34 deletions(-)
> 



^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family
@ 2021-07-14 10:20 Robin Gong
  2021-07-14  9:05 ` Lucas Stach
                   ` (13 more replies)
  0 siblings, 14 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
exist on all legacy i.mx6/7 soc family before i.mx6ul.
NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
or not.
The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
   Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1.Add commit log for reverted patches.
  2.Add comment for 'ecspi_fixed' in sdma driver.
  3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
    rather than remove.
v3:
  1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
    /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
    Correct dts related dts patch in v2.
  2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
    in spi-imx driver to state ERR009165 fixed or not.
  3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
    errata workaroud, thus improve performance as possible.
v4:
  1.Add Ack tag from Mark and Vinod
  2.Remove checking 'event_id1' zero as 'event_id0'.
v5:
  1.Add the last patch for compatible with the current uart driver which
    using rom script, so both uart ram script and rom script supported
    in latest firmware, by default uart rom script used. UART driver
    will be broken without this patch.
v6:
  1.Resend after rebase the latest next branch.
  2.Remove below No.13~No.15 patches of v5 because they were mergered.
  	ARM: dts: imx6ul: add dma support on ecspi
  	ARM: dts: imx6sll: correct sdma compatible
  	arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  3.Revert "dmaengine: imx-sdma: fix context cache" since
    'context_loaded' removed.
v7:
  1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context
    cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine
    to load context only once" so that no building waring during comes out
    during bisect.
  2.Address Sascha's comments, including eliminating any i.mx6sx in this
    series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking
    care SMC bit for PIO.
  3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
   'spi: imx: add new i.mx6ul compatible name in binding doc'
v8:
  1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge
    it into 04/13 of v7
  2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any
    ecspi function broken even if sdma firmware not updated.
  3.merge 'tx.dst_maxburst' changes in the two continous patches into one
    patch to avoid confusion.
  4.fix typo 'duplicated'.
v9:
  1. add "spi: imx: add dma_sync_sg_for_device after fallback from dma"
     to fix the potential issue brought by commit bcd8e7761ec9("spi: imx:
     fallback to PIO if dma setup failure") which is the only one patch
     of v8 merged. Thanks Matthias for reporting:
     https://lore.kernel.org/linux-arm-kernel/5d246dd81607bb6e5cb9af86ad4e53f7a7a99c50.camel@ew.tq-group.com/
  2. remove 05/13 of v8 "spi: imx:fallback to PIO if dma setup failure"
     since it's been merged.
v10:
  1. remove 01/13 "spi: imx: add dma_sync_sg_for_device after fallback from dma"
     since there is another independent patch merged:
     -- commit 809b1b04df898 ("spi: introduce fallback to pio")
  2. add "dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script" which
     is used to fix the potential dma_alloc_coherent() failure while this
     patchset applied but sdma firmware may not be ready for long time.
  3. burst size change back from fifo size to normal wml to align with nxp
     internal tree which has been test for years. Overnight with loopback
     test with spidev failed with fifo size, but pass with wml(half of fifo
     size).Seems the whole fifo size fed may cause rxfifo overflow during
     tx shift out while rx shift in.
     "spi: imx: remove ERR009165 workaround on i.mx6ul"
  4. remove 12/13 'dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm'
     since below two similar patches merged:
     -- commit 25962e1a7f1d ("dmaengine: imx-sdma: Fix the event id check to
     include RX event for UART6")
     -- commit 2f57b8d57673 ("dmaengine: imx-sdma: Fix: Remove 'always true'
     comparison")
v11:
  1. change dev_err() to dev_warn_once() in case sdma firmware not loaded to
     eliminate meaningless duplicate log print.
v12:
  1. take care uart_2_mcu_addr/uartsh_2_mcu_addr since such rom scripts are
     now located in the bottom part of sdma_script_start_addrs which are beyond
     the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1. Reported by Frieder as below:
     https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2263544.html
v13:
  1. rebase with latest linux-next.
  2. remove 09/12 'spi: imx: add new i.mx6ul compatible name in binding doc'
     since it's been converted to yaml already.
  3. add 'Fixes', 'Cc: stable@vger.kernel.org' and 'Test-by' tags for 03,04
     since they are confirmed fix by Richard Leitner:
     https://lkml.org/lkml/2020/8/17/39
     https://www.spinics.net/lists/dmaengine/msg23489.html
  4. fix potential descriptor free unexpected on the next transfer before
     the last channel terminated:
     https://www.spinics.net/lists/dmaengine/msg23400.html
v14:
  1. rebase with latest linux-next.

v15:
  1. reuse IMX51_ECSPI type instead of new IMX6UL_ECSPI driver.
  2. use mcu_2_app rom script directly instead of ram script on i.mx6ul.

v16:
  1. move 'sdmac->is_ram_script = false' from sdma_config_write() to
     sdma_get_pc() for addressing Lucas's concern.

Robin Gong (12):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove duplicated sdma_load_context
  dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
  dmaengine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dma: imx-sdma: add i.mx6ul compatible name
  dmaengine: imx-sdma: add uart rom script
  dmaengine: imx-sdma: add terminated list for freed descriptor in
    worker

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  1 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
 drivers/dma/imx-sdma.c                             | 93 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 41 ++++++++--
 5 files changed, 111 insertions(+), 34 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 01/12] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
  2021-07-14  9:05 ` Lucas Stach
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 02/12] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Robin Gong
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8d209c1..9caba45 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -177,7 +177,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 02/12] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
  2021-07-14  9:05 ` Lucas Stach
  2021-07-14 10:20 ` [PATCH v16 01/12] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 03/12] Revert "dmaengine: imx-sdma: refine to load context only once" Robin Gong
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 82e01ce..89c342f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -334,7 +334,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -348,7 +348,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -362,7 +362,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -376,7 +376,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 03/12] Revert "dmaengine: imx-sdma: refine to load context only once"
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (2 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 02/12] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 04/12] dmaengine: imx-sdma: remove duplicated sdma_load_context Robin Gong
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
---
 drivers/dma/imx-sdma.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 8070fd6..e510df0 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -433,7 +433,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -1008,9 +1007,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1053,8 +1049,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1093,7 +1087,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	vchan_get_all_descriptors(&sdmac->vc, &head);
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_terminate_all(struct dma_chan *chan)
@@ -1361,7 +1354,6 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdmac->event_id0 = 0;
 	sdmac->event_id1 = 0;
-	sdmac->context_loaded = false;
 
 	sdma_set_channel_priority(sdmac, 0);
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 04/12] dmaengine: imx-sdma: remove duplicated sdma_load_context
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (3 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 03/12] Revert "dmaengine: imx-sdma: refine to load context only once" Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script Robin Gong
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index e510df0..665ccbf 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1161,7 +1161,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1201,9 +1200,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (4 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 04/12] dmaengine: imx-sdma: remove duplicated sdma_load_context Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14  8:17   ` Lucas Stach
  2021-07-14 10:20 ` [PATCH v16 06/12] dmaengine: imx-sdma: add mcu_2_ecspi script Robin Gong
                   ` (7 subsequent siblings)
  13 siblings, 1 reply; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
is ram script and it's loaded or not, so that could prevent meaningless
following malloc dma descriptor and bd allocate in sdma_transfer_init(),
otherwise memory may be consumed out potentially without free in case
that spi fallback into pio while dma transfer failed by sdma firmware not
ready(next ERR009165 patch depends on sdma RAM scripts/firmware).

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 665ccbf..d366198 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -435,6 +435,7 @@ struct sdma_channel {
 	enum dma_status			status;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
+	bool				is_ram_script;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -498,6 +499,7 @@ struct sdma_engine {
 	struct sdma_buffer_descriptor	*bd0;
 	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
 	bool				clk_ratio;
+	bool                            fw_loaded;
 };
 
 static int sdma_config_write(struct dma_chan *chan,
@@ -918,6 +920,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 	sdmac->pc_to_device = 0;
 	sdmac->device_to_device = 0;
 	sdmac->pc_to_pc = 0;
+	sdmac->is_ram_script = false;
 
 	switch (peripheral_type) {
 	case IMX_DMATYPE_MEMORY:
@@ -953,6 +956,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 	case IMX_DMATYPE_SSI_DUAL:
 		per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
+		sdmac->is_ram_script = true;
 		break;
 	case IMX_DMATYPE_SSI_SP:
 	case IMX_DMATYPE_MMC:
@@ -967,6 +971,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
 		emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
 		per_2_per = sdma->script_addrs->per_2_per_addr;
+		sdmac->is_ram_script = true;
 		break;
 	case IMX_DMATYPE_ASRC_SP:
 		per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
@@ -1363,6 +1368,11 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
 {
 	struct sdma_desc *desc;
 
+	if (!sdmac->sdma->fw_loaded && sdmac->is_ram_script) {
+		dev_warn_once(sdmac->sdma->dev, "sdma firmware not ready!\n");
+		goto err_out;
+	}
+
 	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
 	if (!desc)
 		goto err_out;
@@ -1792,6 +1802,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
 
 	sdma_add_scripts(sdma, addr);
 
+	sdma->fw_loaded = true;
+
 	dev_info(sdma->dev, "loaded firmware %d.%d\n",
 			header->version_major,
 			header->version_minor);
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 06/12] dmaengine: imx-sdma: add mcu_2_ecspi script
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (5 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 07/12] spi: imx: fix ERR009165 Robin Gong
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d366198..5969df8 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -947,6 +947,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		sdmac->is_ram_script = true;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 07/12] spi: imx: fix ERR009165
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (6 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 06/12] dmaengine: imx-sdma: add mcu_2_ecspi script Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 08/12] spi: imx: remove ERR009165 workaround on i.mx6ul Robin Gong
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-imx.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 4aee3db..61e4fa0 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -608,8 +608,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+	/* ERR009165: work in XHC mode as PIO */
+	ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -623,7 +623,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(0) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1239,10 +1239,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 08/12] spi: imx: remove ERR009165 workaround on i.mx6ul
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (7 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 07/12] spi: imx: fix ERR009165 Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 " Robin Gong
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .

For removing workaround on those chips. Add new i.mx6ul type.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-imx.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 61e4fa0..63a8d7b 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -77,6 +77,11 @@ struct spi_imx_devtype_data {
 	bool has_slavemode;
 	unsigned int fifo_size;
 	bool dynamic_burst;
+	/*
+	 * ERR009165 fixed or not:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool tx_glitch_fixed;
 	enum spi_imx_devtype devtype;
 };
 
@@ -608,8 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
+		ctrl |= MX51_ECSPI_CTRL_SMC;
+	else
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -618,12 +629,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
+	if (spi_imx->devtype_data->tx_glitch_fixed)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(0) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1014,6 +1029,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.tx_glitch_fixed = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX51_ECSPI,
+};
+
 static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
 	{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
@@ -1022,6 +1054,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (8 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 08/12] spi: imx: remove ERR009165 workaround on i.mx6ul Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14  8:17   ` Lucas Stach
  2021-07-14 10:20 ` [PATCH v16 10/12] dma: imx-sdma: add i.mx6ul compatible name Robin Gong
                   ` (3 subsequent siblings)
  13 siblings, 1 reply; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 5969df8..cfcd413 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -476,6 +476,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it has been fixed in soc from i.mx6ul.
+	 * please get more information from the below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -596,6 +603,13 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6q,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -629,6 +643,7 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -948,8 +963,15 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		break;
 	case IMX_DMATYPE_CSPI:
 		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
-		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
-		sdmac->is_ram_script = true;
+
+		/* Use rom script mcu_2_app if ERR009165 fixed */
+		if (sdmac->sdma->drvdata->ecspi_fixed) {
+			emi_2_per = sdma->script_addrs->mcu_2_app_addr;
+		} else {
+			emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+			sdmac->is_ram_script = true;
+		}
+
 		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 10/12] dma: imx-sdma: add i.mx6ul compatible name
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (9 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 " Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 11/12] dmaengine: imx-sdma: add uart rom script Robin Gong
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Add i.mx6ul compatible name in binding doc.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index c9e9740..12c316f 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
       "fsl,imx8mm-sdma"
       "fsl,imx8mn-sdma"
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 11/12] dmaengine: imx-sdma: add uart rom script
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (10 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 10/12] dma: imx-sdma: add i.mx6ul compatible name Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-14 10:20 ` [PATCH v16 12/12] dmaengine: imx-sdma: add terminated list for freed descriptor in worker Robin Gong
  2021-07-23  3:20 ` [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Shawn Guo
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).

rom script:
        uart_2_mcu_addr
	uartsh_2_mcu_addr /* through spba bus */
am script:
	uart_2_mcu_ram_addr
	uartsh_2_mcu_ram_addr /* through spba bus */

Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index cfcd413..9ec1edf 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -198,12 +198,12 @@ struct sdma_script_start_addrs {
 	s32 per_2_firi_addr;
 	s32 mcu_2_firi_addr;
 	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
+	s32 uart_2_mcu_ram_addr;
 	s32 per_2_app_addr;
 	s32 mcu_2_app_addr;
 	s32 per_2_per_addr;
 	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
+	s32 uartsh_2_mcu_ram_addr;
 	s32 per_2_shp_addr;
 	s32 mcu_2_shp_addr;
 	s32 ata_2_mcu_addr;
@@ -230,6 +230,10 @@ struct sdma_script_start_addrs {
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
 	s32 mcu_2_ecspi_addr;
+	s32 mcu_2_sai_addr;
+	s32 sai_2_mcu_addr;
+	s32 uart_2_mcu_addr;
+	s32 uartsh_2_mcu_addr;
 	/* End of v3 array */
 	s32 mcu_2_zqspi_addr;
 	/* End of v4 array */
@@ -1747,8 +1751,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
 
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
 
 static void sdma_add_scripts(struct sdma_engine *sdma,
 		const struct sdma_script_start_addrs *addr)
@@ -1772,6 +1776,19 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
+
+	/*
+	 * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because
+	 * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr
+	 * to be compatible with legacy freescale/nxp sdma firmware, and they
+	 * are located in the bottom part of sdma_script_start_addrs which are
+	 * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1.
+	 */
+	if (addr->uart_2_mcu_addr)
+		sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr;
+	if (addr->uartsh_2_mcu_addr)
+		sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr;
+
 }
 
 static void sdma_load_firmware(const struct firmware *fw, void *context)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH v16 12/12] dmaengine: imx-sdma: add terminated list for freed descriptor in worker
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (11 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 11/12] dmaengine: imx-sdma: add uart rom script Robin Gong
@ 2021-07-14 10:20 ` Robin Gong
  2021-07-23  3:20 ` [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Shawn Guo
  13 siblings, 0 replies; 18+ messages in thread
From: Robin Gong @ 2021-07-14 10:20 UTC (permalink / raw)
  To: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, shawnguo, festevam, s.hauer, martin.fuzzey,
	u.kleine-koenig, dan.j.williams, matthias.schiffer,
	frieder.schrempf, m.felsch, l.stach, xiaoning.wang
  Cc: devicetree, linux-kernel, linux-spi, linux-imx, kernel,
	dmaengine, linux-arm-kernel

Add terminated list for keeping descriptor so that it could be freed in
worker without any potential involving next descriptor raised up before
this descriptor freed, because vchan_get_all_descriptors get all
descriptors including the last terminated descriptor and the next
descriptor, hence, the next descriptor maybe freed unexpectly when it's
done in worker without this patch.
https://www.spinics.net/lists/dmaengine/msg23367.html

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/dma/imx-sdma.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 9ec1edf..cacc725 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -439,6 +439,7 @@ struct sdma_channel {
 	enum dma_status			status;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
+	struct list_head                terminated;
 	bool				is_ram_script;
 };
 
@@ -1107,9 +1108,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 {
 	struct sdma_channel *sdmac = container_of(work, struct sdma_channel,
 						  terminate_worker);
-	unsigned long flags;
-	LIST_HEAD(head);
-
 	/*
 	 * According to NXP R&D team a delay of one BD SDMA cost time
 	 * (maximum is 1ms) should be added after disable of the channel
@@ -1118,10 +1116,7 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	 */
 	usleep_range(1000, 2000);
 
-	spin_lock_irqsave(&sdmac->vc.lock, flags);
-	vchan_get_all_descriptors(&sdmac->vc, &head);
-	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
-	vchan_dma_desc_free_list(&sdmac->vc, &head);
+	vchan_dma_desc_free_list(&sdmac->vc, &sdmac->terminated);
 }
 
 static int sdma_terminate_all(struct dma_chan *chan)
@@ -1135,6 +1130,13 @@ static int sdma_terminate_all(struct dma_chan *chan)
 
 	if (sdmac->desc) {
 		vchan_terminate_vdesc(&sdmac->desc->vd);
+		/*
+		 * move out current descriptor into terminated list so that
+		 * it could be free in sdma_channel_terminate_work alone
+		 * later without potential involving next descriptor raised
+		 * up before the last descriptor terminated.
+		 */
+		vchan_get_all_descriptors(&sdmac->vc, &sdmac->terminated);
 		sdmac->desc = NULL;
 		schedule_work(&sdmac->terminate_worker);
 	}
@@ -2130,6 +2132,7 @@ static int sdma_probe(struct platform_device *pdev)
 
 		sdmac->channel = i;
 		sdmac->vc.desc_free = sdma_desc_free;
+		INIT_LIST_HEAD(&sdmac->terminated);
 		INIT_WORK(&sdmac->terminate_worker,
 				sdma_channel_terminate_work);
 		/*
-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family
  2021-07-14  9:05 ` Lucas Stach
@ 2021-07-20 12:22   ` Vinod Koul
  0 siblings, 0 replies; 18+ messages in thread
From: Vinod Koul @ 2021-07-20 12:22 UTC (permalink / raw)
  To: Lucas Stach
  Cc: Robin Gong, broonie, shawnguo, devicetree, linux-kernel,
	linux-spi, linux-imx, kernel, dmaengine, linux-arm-kernel,
	mark.rutland, robh+dt, catalin.marinas, will.deacon, festevam,
	s.hauer, martin.fuzzey, u.kleine-koenig, dan.j.williams,
	matthias.schiffer, frieder.schrempf, m.felsch, xiaoning.wang

On 14-07-21, 11:05, Lucas Stach wrote:
> Hi Vinod, Mark, Shawn,
> 
> with this revision I think this series is ready to be picked up, at
> least I couldn't spot any blockers anymore.
> 
> How would you like to deal with this? While the complete series is
> needed to fix the issues and restore proper DMA functionality on
> unaffected SoCs, there are no dependencies between the patches
> targeting different subsystems.
> Do you prefer to pick dma/spi/dt patches from this series in your
> respective trees, or do you want the whole series to go through the imx
> tree? AFAICS all dma and spi patches are already acked, so taking them
> through one tree would be possible, I think.

Sure, since you have acks, feel free to merge thru imx6 tree

-- 
~Vinod

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family
  2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
                   ` (12 preceding siblings ...)
  2021-07-14 10:20 ` [PATCH v16 12/12] dmaengine: imx-sdma: add terminated list for freed descriptor in worker Robin Gong
@ 2021-07-23  3:20 ` Shawn Guo
  13 siblings, 0 replies; 18+ messages in thread
From: Shawn Guo @ 2021-07-23  3:20 UTC (permalink / raw)
  To: Robin Gong
  Cc: vkoul, mark.rutland, broonie, robh+dt, catalin.marinas,
	will.deacon, festevam, s.hauer, martin.fuzzey, u.kleine-koenig,
	dan.j.williams, matthias.schiffer, frieder.schrempf, m.felsch,
	l.stach, xiaoning.wang, devicetree, linux-kernel, linux-spi,
	linux-imx, kernel, dmaengine, linux-arm-kernel

On Wed, Jul 14, 2021 at 06:20:40PM +0800, Robin Gong wrote:
> Robin Gong (12):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove duplicated sdma_load_context
>   dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
>   dmaengine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dma: imx-sdma: add i.mx6ul compatible name
>   dmaengine: imx-sdma: add uart rom script
>   dmaengine: imx-sdma: add terminated list for freed descriptor in
>     worker

Applied all, thanks!

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2021-07-23  3:21 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-14 10:20 [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
2021-07-14  9:05 ` Lucas Stach
2021-07-20 12:22   ` Vinod Koul
2021-07-14 10:20 ` [PATCH v16 01/12] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Robin Gong
2021-07-14 10:20 ` [PATCH v16 02/12] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Robin Gong
2021-07-14 10:20 ` [PATCH v16 03/12] Revert "dmaengine: imx-sdma: refine to load context only once" Robin Gong
2021-07-14 10:20 ` [PATCH v16 04/12] dmaengine: imx-sdma: remove duplicated sdma_load_context Robin Gong
2021-07-14 10:20 ` [PATCH v16 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script Robin Gong
2021-07-14  8:17   ` Lucas Stach
2021-07-14 10:20 ` [PATCH v16 06/12] dmaengine: imx-sdma: add mcu_2_ecspi script Robin Gong
2021-07-14 10:20 ` [PATCH v16 07/12] spi: imx: fix ERR009165 Robin Gong
2021-07-14 10:20 ` [PATCH v16 08/12] spi: imx: remove ERR009165 workaround on i.mx6ul Robin Gong
2021-07-14 10:20 ` [PATCH v16 09/12] dmaengine: imx-sdma: remove ERR009165 " Robin Gong
2021-07-14  8:17   ` Lucas Stach
2021-07-14 10:20 ` [PATCH v16 10/12] dma: imx-sdma: add i.mx6ul compatible name Robin Gong
2021-07-14 10:20 ` [PATCH v16 11/12] dmaengine: imx-sdma: add uart rom script Robin Gong
2021-07-14 10:20 ` [PATCH v16 12/12] dmaengine: imx-sdma: add terminated list for freed descriptor in worker Robin Gong
2021-07-23  3:20 ` [PATCH v16 00/12] add ecspi ERR009165 for i.mx6/7 soc family Shawn Guo

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox