DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Anoob Joseph <anoobj@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Nikhil Rao <nikhil.rao@intel.com>,
	"Erik Gabriel Carrillo" <erik.g.carrillo@intel.com>,
	Abhinandan Gujjar <abhinandan.gujjar@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: "Anoob Joseph" <anoobj@marvell.com>,
	"Narayana Prasad" <pathreya@marvell.com>,
	dev@dpdk.org, "Lukasz Bartosik" <lbartosik@marvell.com>,
	"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
	"Hemant Agrawal" <hemant.agrawal@nxp.com>,
	"Nipun Gupta" <nipun.gupta@nxp.com>,
	"Harry van Haaren" <harry.van.haaren@intel.com>,
	"Mattias Rönnblom" <mattias.ronnblom@ericsson.com>,
	"Liang Ma" <liang.j.ma@intel.com>
Subject: [dpdk-dev] [PATCH 34/39] eventdev: add support for internal ports
Date: Mon, 3 Jun 2019 23:02:34 +0530
Message-ID: <1559583160-13944-35-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1559583160-13944-1-git-send-email-anoobj@marvell.com>

For eventdev-ethdev combinations having Tx internal port & Rx internal
port, usage of ethcore is not needed.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
 lib/librte_eventdev/rte_eventmode_helper.c         | 213 +++++++++++++++++----
 lib/librte_eventdev/rte_eventmode_helper.h         |   4 +
 .../rte_eventmode_helper_internal.h                |   1 +
 lib/librte_eventdev/rte_eventmode_helper_prints.c  |  19 +-
 4 files changed, 192 insertions(+), 45 deletions(-)

diff --git a/lib/librte_eventdev/rte_eventmode_helper.c b/lib/librte_eventdev/rte_eventmode_helper.c
index f237cab..2451cac 100644
--- a/lib/librte_eventdev/rte_eventmode_helper.c
+++ b/lib/librte_eventdev/rte_eventmode_helper.c
@@ -142,6 +142,38 @@ internal_get_eventdev_params(struct eventmode_conf *em_conf,
 }
 
 static inline bool
+internal_dev_has_rx_internal_port(uint8_t eventdev_id)
+{
+	int j;
+	bool flag = true;
+
+	RTE_ETH_FOREACH_DEV(j) {
+		uint32_t caps = 0;
+
+		rte_event_eth_rx_adapter_caps_get(eventdev_id, j, &caps);
+		if (!(caps & RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT))
+			flag = false;
+	}
+	return flag;
+}
+
+static inline bool
+internal_dev_has_tx_internal_port(uint8_t eventdev_id)
+{
+	int j;
+	bool flag = true;
+
+	RTE_ETH_FOREACH_DEV(j) {
+		uint32_t caps = 0;
+
+		rte_event_eth_tx_adapter_caps_get(eventdev_id, j, &caps);
+		if (!(caps & RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT))
+			flag = false;
+	}
+	return flag;
+}
+
+static inline bool
 internal_dev_has_burst_mode(uint8_t dev_id)
 {
 	struct rte_event_dev_info dev_info;
@@ -303,6 +335,8 @@ rte_eventmode_helper_set_default_conf_eventdev(struct eventmode_conf *em_conf)
 {
 	int i, ret;
 	int nb_eventdev;
+	int nb_eth_dev;
+	int lcore_count;
 	struct eventdev_params *eventdev_config;
 	struct rte_event_dev_info dev_info;
 
@@ -314,6 +348,17 @@ rte_eventmode_helper_set_default_conf_eventdev(struct eventmode_conf *em_conf)
 		return -1;
 	}
 
+	/* Get the number of eth devs */
+	nb_eth_dev = rte_eth_dev_count_avail();
+
+	if (nb_eth_dev == 0) {
+		RTE_EM_HLPR_LOG_ERR("No eth devices detected");
+		return -1;
+	}
+
+	/* Get the number of lcores */
+	lcore_count = rte_lcore_count();
+
 	for (i = 0; i < nb_eventdev; i++) {
 
 		/* Get the event dev conf */
@@ -340,13 +385,19 @@ rte_eventmode_helper_set_default_conf_eventdev(struct eventmode_conf *em_conf)
 		eventdev_config->nb_eventqueue = dev_info.max_event_queues;
 		eventdev_config->nb_eventport = dev_info.max_event_ports;
 		eventdev_config->ev_queue_mode =
-				RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+				RTE_EVENT_QUEUE_CFG_ALL_TYPES;
 
-		/* One port is required for eth Rx adapter */
-		eventdev_config->nb_eventport -= 1;
+		/* Check if there are more queues than required */
+		if (eventdev_config->nb_eventqueue > nb_eth_dev + 1) {
+			/* One queue is reserved for Tx */
+			eventdev_config->nb_eventqueue = nb_eth_dev + 1;
+		}
 
-		/* One port is reserved for eth Tx adapter */
-		eventdev_config->nb_eventport -= 1;
+		/* Check if there are more ports than required */
+		if (eventdev_config->nb_eventport > lcore_count) {
+			/* One port per lcore is enough */
+			eventdev_config->nb_eventport = lcore_count;
+		}
 
 		/* Update the number of eventdevs */
 		em_conf->nb_eventdev++;
@@ -355,6 +406,37 @@ rte_eventmode_helper_set_default_conf_eventdev(struct eventmode_conf *em_conf)
 	return 0;
 }
 
+static void
+rte_eventmode_helper_do_capability_check(struct eventmode_conf *em_conf)
+{
+	struct eventdev_params *eventdev_config;
+	uint32_t eventdev_id;
+	int all_internal_ports = 1;
+	int i;
+
+	for (i = 0; i < em_conf->nb_eventdev; i++) {
+
+		/* Get the event dev conf */
+		eventdev_config = &(em_conf->eventdev_config[i]);
+		eventdev_id = eventdev_config->eventdev_id;
+
+		/* Check if event device has internal port for Rx & Tx */
+		if (internal_dev_has_rx_internal_port(eventdev_id) &&
+		    internal_dev_has_tx_internal_port(eventdev_id)) {
+			eventdev_config->all_internal_ports = 1;
+		} else {
+			all_internal_ports = 0;
+		}
+	}
+
+	/*
+	 * If Rx & Tx internal ports are supported by all event devices then
+	 * eth cores won't be required. Override the eth core mask requested.
+	 */
+	if (all_internal_ports)
+		em_conf->eth_core_mask = 0;
+}
+
 static int
 rte_eventmode_helper_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
 {
@@ -363,9 +445,12 @@ rte_eventmode_helper_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
 	int adapter_id;
 	int eventdev_id;
 	int conn_id;
+	int nb_eventqueue;
 	struct rx_adapter_conf *adapter;
 	struct adapter_connection_info *conn;
 	struct eventdev_params *eventdev_config;
+	bool rx_internal_port = true;
+	uint32_t caps = 0;
 
 	/* Create one adapter with all eth queues mapped to event queues 1:1 */
 
@@ -390,7 +475,14 @@ rte_eventmode_helper_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
 	/* Set adapter conf */
 	adapter->eventdev_id = eventdev_id;
 	adapter->adapter_id = adapter_id;
-	adapter->rx_core_id = internal_get_next_eth_core(em_conf);
+
+	/*
+	 * If event device does not have internal ports for passing
+	 * packets then one queue is reserved for Tx path
+	 */
+	nb_eventqueue = eventdev_config->all_internal_ports ?
+			eventdev_config->nb_eventqueue :
+			eventdev_config->nb_eventqueue - 1;
 
 	/*
 	 * All queues of one eth device (port) will be mapped to one event
@@ -399,12 +491,11 @@ rte_eventmode_helper_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
 	 */
 
 	/* Make sure there is enough event queues for 1:1 mapping */
-	if (nb_eth_dev > eventdev_config->nb_eventqueue) {
+	if (nb_eth_dev > nb_eventqueue) {
 		RTE_EM_HLPR_LOG_ERR(
 			"Not enough event queues for 1:1 mapping "
 			"[eth devs: %d, event queues: %d]\n",
-			nb_eth_dev,
-			eventdev_config->nb_eventqueue);
+			nb_eth_dev, nb_eventqueue);
 		return -1;
 	}
 
@@ -427,11 +518,24 @@ rte_eventmode_helper_set_default_conf_rx_adapter(struct eventmode_conf *em_conf)
 		/* Add all eth queues of one eth port to one event queue */
 		conn->ethdev_rx_qid = -1;
 
+		/* Get Rx adapter capabilities */
+		rte_event_eth_rx_adapter_caps_get(eventdev_id, i, &caps);
+		if (!(caps & RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT))
+			rx_internal_port = false;
+
 		/* Update no of connections */
 		adapter->nb_connections++;
 
 	}
 
+	if (rx_internal_port) {
+		/* Rx core is not required */
+		adapter->rx_core_id = -1;
+	} else {
+		/* Rx core is required */
+		adapter->rx_core_id = internal_get_next_eth_core(em_conf);
+	}
+
 	/* We have setup one adapter */
 	em_conf->nb_rx_adapter = 1;
 
@@ -449,6 +553,8 @@ rte_eventmode_helper_set_default_conf_tx_adapter(struct eventmode_conf *em_conf)
 	struct eventdev_params *eventdev_config;
 	struct tx_adapter_conf *tx_adapter;
 	struct tx_adapter_connection_info *conn;
+	bool tx_internal_port = true;
+	uint32_t caps = 0;
 
 	/*
 	 * Create one Tx adapter with all eth queues mapped to event queues
@@ -477,22 +583,6 @@ rte_eventmode_helper_set_default_conf_tx_adapter(struct eventmode_conf *em_conf)
 	tx_adapter->eventdev_id = eventdev_id;
 	tx_adapter->adapter_id = adapter_id;
 
-	/* TODO: Tx core is required only when internal port is not present */
-
-	tx_adapter->tx_core_id = internal_get_next_eth_core(em_conf);
-
-	/*
-	 * Application would need to use one event queue per adapter for
-	 * submitting packets for Tx. Reserving the last queue available
-	 * and decrementing the total available event queues for this
-	 */
-
-	/* Queue numbers start at 0 */
-	tx_adapter->tx_ev_queue = eventdev_config->nb_eventqueue - 1;
-
-	/* Update the number of event queues available in eventdev */
-	eventdev_config->nb_eventqueue--;
-
 	/*
 	 * All Tx queues of the eth device (port) will be mapped to the event
 	 * device.
@@ -523,10 +613,30 @@ rte_eventmode_helper_set_default_conf_tx_adapter(struct eventmode_conf *em_conf)
 		/* Add all eth tx queues to adapter */
 		conn->ethdev_tx_qid = -1;
 
+		/* Get Rx adapter capabilities */
+		rte_event_eth_tx_adapter_caps_get(eventdev_id, i, &caps);
+		if (!(caps & RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT))
+			tx_internal_port = false;
+
 		/* Update no of connections */
 		tx_adapter->nb_connections++;
 	}
 
+	if (tx_internal_port) {
+		/* Tx core is not required */
+		tx_adapter->tx_core_id = -1;
+	} else {
+		/* Tx core is required */
+		tx_adapter->tx_core_id = internal_get_next_eth_core(em_conf);
+
+		/*
+		 * Application would need to use one event queue per adapter for
+		 * submitting packets for Tx. Reserving the last queue available
+		 */
+		/* Queue numbers start at 0 */
+		tx_adapter->tx_ev_queue = eventdev_config->nb_eventqueue - 1;
+	}
+
 	/* We have setup one adapter */
 	em_conf->nb_tx_adapter = 1;
 	return 0;
@@ -620,6 +730,9 @@ rte_eventmode_helper_validate_conf(struct eventmode_conf *em_conf)
 			return ret;
 	}
 
+	/* Perform capability check for the selected event devices*/
+	rte_eventmode_helper_do_capability_check(em_conf);
+
 	/*
 	 * See if rx adapters are specified. Else generate a default conf
 	 * with one rx adapter and all eth queue - event queue mapped.
@@ -681,10 +794,6 @@ rte_eventmode_helper_initialize_eventdev(struct eventmode_conf *em_conf)
 		/* Get the number of queues */
 		nb_eventqueue = eventdev_config->nb_eventqueue;
 
-		/* One queue is reserved for the final stage (doing eth tx) */
-		/* TODO handles only one Tx adapter. Fix this */
-		nb_eventqueue += 1;
-
 		/* Reset the default conf */
 		memset(&evdev_default_conf, 0,
 			sizeof(struct rte_event_dev_info));
@@ -730,14 +839,15 @@ rte_eventmode_helper_initialize_eventdev(struct eventmode_conf *em_conf)
 			/* Per event dev queues can be ATQ or SINGLE LINK */
 			eventq_conf.event_queue_cfg =
 					eventdev_config->ev_queue_mode;
-
 			/*
 			 * All queues need to be set with sched_type as
-			 * schedule type for the application stage. One queue
-			 * would be reserved for the final eth tx stage. This
-			 * will be an atomic queue.
+			 * schedule type for the application stage. One
+			 * queue would be reserved for the final eth tx
+			 * stage if event device does not have internal
+			 * ports. This will be an atomic queue.
 			 */
-			if (j == nb_eventqueue-1) {
+			if (!eventdev_config->all_internal_ports &&
+			    j == nb_eventqueue-1) {
 				eventq_conf.schedule_type =
 					RTE_SCHED_TYPE_ATOMIC;
 			} else {
@@ -867,8 +977,10 @@ rx_adapter_configure(struct eventmode_conf *em_conf,
 
 	/* Setup various connections in the adapter */
 
+#ifdef UNSELECT
 	queue_conf.rx_queue_flags =
 			RTE_EVENT_ETH_RX_ADAPTER_QUEUE_FLOW_ID_VALID;
+#endif /* UNSELECT */
 
 	for (j = 0; j < adapter->nb_connections; j++) {
 		/* Get connection */
@@ -877,9 +989,12 @@ rx_adapter_configure(struct eventmode_conf *em_conf,
 		/* Setup queue conf */
 		queue_conf.ev.queue_id = conn->eventq_id;
 		queue_conf.ev.sched_type = em_conf->ext_params.sched_type;
+		queue_conf.ev.event_type = RTE_EVENT_TYPE_ETHDEV;
 
+#ifdef UNSELECT
 		/* Set flow ID as ethdev ID */
 		queue_conf.ev.flow_id = conn->ethdev_id;
+#endif /* UNSELECT */
 
 		/* Add queue to the adapter */
 		ret = rte_event_eth_rx_adapter_queue_add(
@@ -945,8 +1060,8 @@ tx_adapter_configure(struct eventmode_conf *em_conf,
 {
 	int ret, j;
 	uint8_t tx_port_id = 0;
-	uint8_t eventdev_id;
 	uint32_t service_id;
+	uint8_t eventdev_id;
 	struct rte_event_port_conf port_conf = {0};
 	struct rte_event_dev_info evdev_default_conf = {0};
 	struct tx_adapter_connection_info *conn;
@@ -1004,6 +1119,18 @@ tx_adapter_configure(struct eventmode_conf *em_conf,
 		}
 	}
 
+	/*
+	 * Check if Tx core is assigned. If Tx core is not assigned, then
+	 * the adapter would be having internal port for submitting packets
+	 * for Tx and so Tx event queue & port setup is not required
+	 */
+	if (adapter->tx_core_id == (uint32_t) (-1)) {
+		/* Internal port is present */
+		goto skip_tx_queue_port_setup;
+	}
+
+	/* Setup Tx queue & port */
+
 	/* Get event port used by the adapter */
 	ret = rte_event_eth_tx_adapter_event_port_get(
 			adapter->adapter_id,
@@ -1014,11 +1141,6 @@ tx_adapter_configure(struct eventmode_conf *em_conf,
 	}
 
 	/*
-	 * TODO: event queue for Tx adapter is required only if the
-	 * INTERNAL PORT is not present.
-	 */
-
-	/*
 	 * Tx event queue would be reserved for Tx adapter. Need to unlink
 	 * this queue from all other ports
 	 *
@@ -1028,6 +1150,7 @@ tx_adapter_configure(struct eventmode_conf *em_conf,
 				      &(adapter->tx_ev_queue), 1);
 	}
 
+	/* Link Tx event queue to Tx port */
 	ret = rte_event_port_link(
 			eventdev_id,
 			tx_port_id,
@@ -1055,6 +1178,8 @@ tx_adapter_configure(struct eventmode_conf *em_conf,
 	 */
 	rte_service_set_runstate_mapped_check(service_id, 0);
 
+skip_tx_queue_port_setup:
+
 	/* Start adapter */
 	ret = rte_event_eth_tx_adapter_start(adapter->adapter_id);
 	if (ret) {
@@ -1437,6 +1562,14 @@ rte_eventmode_helper_find_worker(uint32_t lcore_id,
 	else
 		curr_conf.cap.burst = RTE_EVENTMODE_HELPER_RX_TYPE_NON_BURST;
 
+	/* Check for Tx internal port */
+	if (internal_dev_has_tx_internal_port(eventdev_id))
+		curr_conf.cap.tx_internal_port =
+				RTE_EVENTMODE_HELPER_TX_TYPE_INTERNAL_PORT;
+	else
+		curr_conf.cap.tx_internal_port =
+				RTE_EVENTMODE_HELPER_TX_TYPE_NO_INTERNAL_PORT;
+
 	/* Now parse the passed list and see if we have matching capabilities */
 
 	/* Initialize the pointer used to traverse the list */
diff --git a/lib/librte_eventdev/rte_eventmode_helper.h b/lib/librte_eventdev/rte_eventmode_helper.h
index 2212622..f705eec 100644
--- a/lib/librte_eventdev/rte_eventmode_helper.h
+++ b/lib/librte_eventdev/rte_eventmode_helper.h
@@ -36,6 +36,8 @@ enum rte_eventmode_helper_rx_types {
 /* Event mode packet tx types */
 enum rte_eventmode_helper_tx_types {
 	RTE_EVETNMODE_HELPER_TX_TYPE_INVALID = 0,
+	RTE_EVENTMODE_HELPER_TX_TYPE_INTERNAL_PORT,
+	RTE_EVENTMODE_HELPER_TX_TYPE_NO_INTERNAL_PORT,
 	RTE_EVENTMODE_HELPER_TX_TYPE_MAX = 16
 };
 
@@ -85,6 +87,8 @@ struct rte_eventmode_helper_app_worker_params {
 		struct {
 			uint64_t burst : 4;
 			/**< Specify status of rx type burst */
+			uint64_t tx_internal_port : 4;
+			/**< Specify whether tx internal port is available */
 		};
 		uint64_t u64;
 	} cap;
diff --git a/lib/librte_eventdev/rte_eventmode_helper_internal.h b/lib/librte_eventdev/rte_eventmode_helper_internal.h
index 1daca22..44796e3 100644
--- a/lib/librte_eventdev/rte_eventmode_helper_internal.h
+++ b/lib/librte_eventdev/rte_eventmode_helper_internal.h
@@ -66,6 +66,7 @@ struct eventdev_params {
 	uint8_t nb_eventqueue;
 	uint8_t nb_eventport;
 	uint8_t ev_queue_mode;
+	uint8_t all_internal_ports;
 };
 
 /* Rx adapter connection info */
diff --git a/lib/librte_eventdev/rte_eventmode_helper_prints.c b/lib/librte_eventdev/rte_eventmode_helper_prints.c
index 387302a..0a34f43 100644
--- a/lib/librte_eventdev/rte_eventmode_helper_prints.c
+++ b/lib/librte_eventdev/rte_eventmode_helper_prints.c
@@ -64,13 +64,22 @@ rte_eventmode_display_rx_adapter_conf(struct eventmode_conf *em_conf)
 
 	for (i = 0; i < nb_rx_adapter; i++) {
 		adapter = &(em_conf->rx_adapter[i]);
-		RTE_EM_HLPR_LOG_INFO(
-			"\tRx adaper ID: %-2d\tConnections: %-2d\tEvent dev ID: %-2d"
-			"\tRx core: %-2d",
+		sprintf(print_buf,
+			"\tRx adaper ID: %-2d\tConnections: %-2d\tEvent dev ID: %-2d",
 			adapter->adapter_id,
 			adapter->nb_connections,
-			adapter->eventdev_id,
-			adapter->rx_core_id);
+			adapter->eventdev_id);
+		if (adapter->rx_core_id == (uint32_t)-1)
+			sprintf(print_buf + strlen(print_buf),
+				"\tRx core: %-2s", "[INTERNAL PORT]");
+		else if (adapter->rx_core_id == RTE_MAX_LCORE)
+			sprintf(print_buf + strlen(print_buf),
+				"\tRx core: %-2s", "[NONE]");
+		else
+			sprintf(print_buf + strlen(print_buf),
+				"\tRx core: %-2d", adapter->rx_core_id);
+
+		RTE_EM_HLPR_LOG_INFO("%s", print_buf);
 
 		for (j = 0; j < adapter->nb_connections; j++) {
 			conn = &(adapter->conn[j]);
-- 
2.7.4


  parent reply index

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 17:32 [dpdk-dev] [PATCH 00/39] adding eventmode helper library Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 01/39] examples/l2fwd-event: create copy of l2fwd Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 02/39] examples/l2fwd-event: move macros to common header Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 03/39] examples/l2fwd-event: move structures " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 04/39] examples/l2fwd-event: move global vars " Anoob Joseph
2019-06-07 10:02   ` Jerin Jacob Kollanukkaran
2019-06-07 10:45     ` Anoob Joseph
2019-06-07 12:47       ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 05/39] examples/l2fwd-event: move dataplane code to new file Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 06/39] examples/l2fwd-event: remove unused header includes Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 07/39] examples/l2fwd-event: move drain buffers to new function Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 08/39] examples/l2fwd-event: optimize check for master core Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 09/39] examples/l2fwd-event: move periodic tasks to new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 10/39] examples/l2fwd-event: do timer updates only on master Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 11/39] examples/l2fwd-event: move pkt send code to a new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 12/39] examples/l2fwd-event: use fprintf in usage print Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 13/39] examples/l2fwd-event: improvements to the " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 14/39] eventdev: add files for eventmode helper Anoob Joseph
2019-06-10 10:10   ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 15/39] eventdev: add routines for logging " Anoob Joseph
2019-06-10 10:12   ` Jerin Jacob Kollanukkaran
2019-06-17  9:09     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 16/39] eventdev: add eventmode CL options framework Anoob Joseph
2019-06-10 10:19   ` Jerin Jacob Kollanukkaran
2019-06-17 10:14     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 17/39] eventdev: allow application to set ethernet portmask Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 18/39] eventdev: add framework for eventmode conf Anoob Joseph
2019-06-10 10:06   ` Jerin Jacob Kollanukkaran
2019-06-20  7:26     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 19/39] eventdev: add common initialize routine for eventmode devs Anoob Joseph
2019-06-10 10:23   ` Jerin Jacob Kollanukkaran
2019-06-17 10:22     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 20/39] eventdev: add eventdevice init for eventmode Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 21/39] eventdev: add eventdev port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 22/39] eventdev: add option to specify schedule mode for app stage Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 23/39] eventdev: add placeholder for ethdev init Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 24/39] eventdev: add Rx adapter init in eventmode Anoob Joseph
2019-06-10 14:56   ` Carrillo, Erik G
2019-06-11  3:45     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 25/39] eventdev: add routine to validate conf Anoob Joseph
2019-06-10 10:25   ` Jerin Jacob Kollanukkaran
2019-06-17 10:23     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 26/39] eventdev: add default conf for event devs field in conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 27/39] eventdev: add default conf for Rx adapter conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 28/39] eventdev: add default conf for event port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 29/39] eventdev: add routines to display the eventmode conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 30/39] eventdev: add routine to access eventmode link info Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 31/39] eventdev: add routine to access event queue for eth Tx Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 32/39] eventdev: add routine to launch eventmode workers Anoob Joseph
2019-06-10 14:31   ` Carrillo, Erik G
2019-06-17 10:34     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-10 14:46   ` [dpdk-dev] " Carrillo, Erik G
2019-06-27  5:50     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 33/39] eventdev: add Tx adapter support Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` Anoob Joseph [this message]
2019-06-03 17:32 ` [dpdk-dev] [PATCH 35/39] eventdev: display Tx adapter conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 36/39] examples/l2fwd-event: add eventmode for l2fwd Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 37/39] examples/l2fwd-event: add eventmode worker Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 38/39] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 39/39] " Anoob Joseph
2019-06-07  9:48 ` [dpdk-dev] [PATCH 00/39] adding eventmode helper library Jerin Jacob Kollanukkaran
2019-06-11 10:44   ` Mattias Rönnblom
2019-06-14  9:18     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-17 13:23       ` Mattias Rönnblom
2019-06-20  3:44         ` Anoob Joseph
     [not found] <1559580584-5728-1-git-send-email-anoobj@marvell.com>
2019-06-03 16:49 ` [dpdk-dev] [PATCH 34/39] eventdev: add support for internal ports Anoob Joseph

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1559583160-13944-35-git-send-email-anoobj@marvell.com \
    --to=anoobj@marvell.com \
    --cc=abhinandan.gujjar@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinj@marvell.com \
    --cc=lbartosik@marvell.com \
    --cc=liang.j.ma@intel.com \
    --cc=mattias.ronnblom@ericsson.com \
    --cc=nikhil.rao@intel.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=pathreya@marvell.com \
    --cc=pbhagavatula@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox