DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Anoob Joseph <anoobj@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Nikhil Rao <nikhil.rao@intel.com>,
	"Erik Gabriel Carrillo" <erik.g.carrillo@intel.com>,
	Abhinandan Gujjar <abhinandan.gujjar@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: "Anoob Joseph" <anoobj@marvell.com>,
	"Narayana Prasad" <pathreya@marvell.com>,
	dev@dpdk.org, "Lukasz Bartosik" <lbartosik@marvell.com>,
	"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
	"Hemant Agrawal" <hemant.agrawal@nxp.com>,
	"Nipun Gupta" <nipun.gupta@nxp.com>,
	"Harry van Haaren" <harry.van.haaren@intel.com>,
	"Mattias Rönnblom" <mattias.ronnblom@ericsson.com>,
	"Liang Ma" <liang.j.ma@intel.com>
Subject: [dpdk-dev] [PATCH 36/39] examples/l2fwd-event: add eventmode for l2fwd
Date: Mon, 3 Jun 2019 23:02:36 +0530
Message-ID: <1559583160-13944-37-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1559583160-13944-1-git-send-email-anoobj@marvell.com>

Adding eventmode support in l2fwd. This uses rte_eventmode_helper APIs
to setup and use the eventmode capabilties.

Adding non-burst no Tx internal-port eventmode worker.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
 examples/l2fwd-event/Makefile       |   1 +
 examples/l2fwd-event/l2fwd_worker.c | 314 ++++++++++++++++++++++++++++++++++--
 examples/l2fwd-event/main.c         |  64 ++++++--
 examples/l2fwd-event/meson.build    |   2 +
 4 files changed, 360 insertions(+), 21 deletions(-)

diff --git a/examples/l2fwd-event/Makefile b/examples/l2fwd-event/Makefile
index d6bdb9e..dbb793f 100644
--- a/examples/l2fwd-event/Makefile
+++ b/examples/l2fwd-event/Makefile
@@ -49,6 +49,7 @@ RTE_TARGET ?= x86_64-native-linuxapp-gcc
 
 include $(RTE_SDK)/mk/rte.vars.mk
 
+CFLAGS += -DALLOW_EXPERIMENTAL_API
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
 
diff --git a/examples/l2fwd-event/l2fwd_worker.c b/examples/l2fwd-event/l2fwd_worker.c
index 1a7ee2b..92eae02 100644
--- a/examples/l2fwd-event/l2fwd_worker.c
+++ b/examples/l2fwd-event/l2fwd_worker.c
@@ -25,15 +25,38 @@
 #include <rte_branch_prediction.h>
 #include <rte_ether.h>
 #include <rte_ethdev.h>
+#include <rte_eventdev.h>
+#include <rte_eventmode_helper.h>
+#include <rte_malloc.h>
 #include <rte_mbuf.h>
 
 #include "l2fwd_common.h"
 #include "l2fwd_worker.h"
 
+/* Reset eth stats */
+static void
+reset_eth_stats(int is_master_core)
+{
+	int portid;
+
+	/* Only master core need to do this */
+	if (!is_master_core)
+		return;
+
+	/* Reset stats */
+	for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+		/* skip disabled ports */
+		if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+			continue;
+		rte_eth_stats_reset(portid);
+	}
+}
+
 /* Print out statistics on packets dropped */
 static void
 print_stats(void)
 {
+	struct rte_eth_stats stats;
 	uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
 	unsigned int portid;
 
@@ -53,19 +76,21 @@ print_stats(void)
 		/* skip disabled ports */
 		if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
 			continue;
+		rte_eth_stats_get(portid, &stats);
 		printf("\nStatistics for port %u ------------------------------"
 			   "\nPackets sent: %24"PRIu64
 			   "\nPackets received: %20"PRIu64
 			   "\nPackets dropped: %21"PRIu64,
 			   portid,
-			   port_statistics[portid].tx,
-			   port_statistics[portid].rx,
-			   port_statistics[portid].dropped);
+			   stats.opackets,
+			   stats.ipackets,
+			   stats.oerrors);
 
-		total_packets_dropped += port_statistics[portid].dropped;
-		total_packets_tx += port_statistics[portid].tx;
-		total_packets_rx += port_statistics[portid].rx;
+		total_packets_dropped += stats.oerrors;
+		total_packets_tx += stats.opackets;
+		total_packets_rx += stats.ipackets;
 	}
+
 	printf("\nAggregate statistics ==============================="
 		   "\nTotal packets sent: %18"PRIu64
 		   "\nTotal packets received: %14"PRIu64
@@ -138,6 +163,16 @@ l2fwd_periodic_drain_stats_monitor(struct lcore_queue_conf *qconf,
 	}
 }
 
+static inline void
+l2fwd_drain_loop(struct lcore_queue_conf *qconf, struct tsc_tracker *t,
+		int is_master_core)
+{
+	while (!force_quit) {
+		/* Do periodic operations (buffer drain & stats monitor) */
+		l2fwd_periodic_drain_stats_monitor(qconf, t, is_master_core);
+	}
+}
+
 static void
 l2fwd_mac_updating(struct rte_mbuf *m, unsigned int dest_portid)
 {
@@ -180,9 +215,40 @@ l2fwd_simple_forward(struct rte_mbuf *m, unsigned int portid)
 	l2fwd_send_pkt(m, dst_port);
 }
 
-/* main processing loop */
+static inline void
+l2fwd_event_pre_forward(struct rte_event *ev, unsigned int portid)
+{
+	unsigned int dst_port;
+	struct rte_mbuf *m;
+
+	/* Get the mbuf */
+	m = ev->mbuf;
+
+	/* Get the destination port from the tables */
+	dst_port = l2fwd_dst_ports[portid];
+
+	/* Save the destination port in the mbuf */
+	m->port = dst_port;
+
+	/* Use tx queue 0 */
+	rte_event_eth_tx_adapter_txq_set(m, 0);
+
+	/* Perform work */
+	if (mac_updating)
+		l2fwd_mac_updating(m, dst_port);
+}
+
+static inline void
+l2fwd_event_switch_to_tx_queue(struct rte_event *ev, uint8_t tx_queue_id)
+{
+	ev->event_type = RTE_EVENT_TYPE_CPU;
+	ev->op = RTE_EVENT_OP_FORWARD;
+	ev->queue_id = tx_queue_id;
+}
+
+/* poll mode processing loop */
 static void
-l2fwd_main_loop(void)
+l2fwd_poll_mode_worker(void)
 {
 	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
 	struct rte_mbuf *m;
@@ -242,9 +308,237 @@ l2fwd_main_loop(void)
 	}
 }
 
+/*
+ * Event mode exposes various operating modes depending on the
+ * capabilities of the event device and the operating mode
+ * selected.
+ */
+
+/* Workers registered */
+#define L2FWD_EVENTMODE_WORKERS		1
+
+/*
+ * Event mode worker
+ * Operating mode : non-burst no internal port (regular tx worker)
+ */
+static void
+l2fwd_eventmode_non_burst_no_internal_port(void *args)
+{
+	struct rte_event ev;
+	struct rte_mbuf *pkt;
+	struct rte_eventmode_helper_conf *mode_conf;
+	struct rte_eventmode_helper_event_link_info *links = NULL;
+	unsigned int lcore_nb_link = 0;
+	uint32_t lcore_id;
+	unsigned int i, nb_rx = 0;
+	unsigned int portid;
+	struct lcore_queue_conf *qconf;
+	int is_master_core;
+	struct tsc_tracker tsc = {0};
+	uint8_t tx_queue;
+
+	/* Get core ID */
+	lcore_id = rte_lcore_id();
+
+	RTE_LOG(INFO, L2FWD,
+		"Launching event mode non-burst worker no internal port "
+		"(regular tx worker) on lcore %d\n", lcore_id);
+
+	/* Set the flag if master core */
+	is_master_core = (lcore_id == rte_get_master_lcore()) ? 1 : 0;
+
+	/* Get qconf for this core */
+	qconf = &lcore_queue_conf[lcore_id];
+
+	/* Set drain tsc */
+	tsc.drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
+			US_PER_S * BURST_TX_DRAIN_US;
+
+	/* Mode conf will be passed as args */
+	mode_conf = (struct rte_eventmode_helper_conf *)args;
+
+	/* Get the links configured for this lcore */
+	lcore_nb_link = rte_eventmode_helper_get_event_lcore_links(lcore_id,
+			mode_conf, &links);
+
+	/* Check if we have links registered for this lcore */
+	if (lcore_nb_link == 0) {
+		/* No links registered. The core could do periodic drains */
+		l2fwd_drain_loop(qconf, &tsc, is_master_core);
+		goto clean_and_exit;
+	}
+
+	/* We have valid links */
+
+	/* Reset stats before proceeding */
+	reset_eth_stats(is_master_core);
+
+	/*
+	 * There is no internal port between ethdev and eventdev. So the worker
+	 * thread needs to submit event to a designated tx queue. Internally
+	 * eth core would receive events from multiple worker threads and send
+	 * out packets on wire.
+	 */
+	tx_queue = rte_eventmode_helper_get_tx_queue(mode_conf,
+						     links[0].eventdev_id);
+	/* See if it's single link */
+	if (lcore_nb_link == 1)
+		goto single_link_loop;
+	else
+		goto multi_link_loop;
+
+single_link_loop:
+
+	RTE_LOG(INFO, L2FWD, " -- lcoreid=%u event_port_id=%u\n", lcore_id,
+			links[0].event_portid);
+
+	while (!force_quit) {
+
+		/* Do periodic operations (buffer drain & stats monitor) */
+		l2fwd_periodic_drain_stats_monitor(qconf, &tsc, is_master_core);
+
+		/* Read packet from event queues */
+		nb_rx = rte_event_dequeue_burst(links[0].eventdev_id,
+				links[0].event_portid,
+				&ev,	/* events */
+				1,	/* nb_events */
+				0	/* timeout_ticks */);
+
+		if (nb_rx == 0)
+			continue;
+
+		portid = ev.queue_id;
+		port_statistics[portid].rx++;
+		pkt = ev.mbuf;
+
+		rte_prefetch0(rte_pktmbuf_mtod(pkt, void *));
+
+		/* Process packet */
+		l2fwd_event_pre_forward(&ev, portid);
+
+		/*
+		 * Internal port is not available, the packet needs
+		 * to be enqueued to the designated event queue.
+		 */
+
+		/* Prepare event for submission to tx event queue */
+		l2fwd_event_switch_to_tx_queue(&ev, tx_queue);
+
+		/* Submit the updated event for tx stage */
+		rte_event_enqueue_burst(links[0].eventdev_id,
+				links[0].event_portid,
+				&ev,	/* events */
+				1	/* nb_events */);
+	}
+	goto clean_and_exit;
+
+multi_link_loop:
+
+	for (i = 0; i < lcore_nb_link; i++) {
+		RTE_LOG(INFO, L2FWD, " -- lcoreid=%u event_port_id=%u\n",
+				lcore_id, links[i].event_portid);
+	}
+
+	while (!force_quit) {
+
+		/* Do periodic operations (buffer drain & stats monitor) */
+		l2fwd_periodic_drain_stats_monitor(qconf, &tsc, is_master_core);
+
+		for (i = 0; i < lcore_nb_link; i++) {
+			/* Read packet from event queues */
+			nb_rx = rte_event_dequeue_burst(links[i].eventdev_id,
+					links[i].event_portid,
+					&ev,	/* events */
+					1,	/* nb_events */
+					0	/* timeout_ticks */);
+
+			if (nb_rx == 0)
+				continue;
+
+			portid = ev.queue_id;
+			port_statistics[portid].rx++;
+			pkt = ev.mbuf;
+
+			rte_prefetch0(rte_pktmbuf_mtod(pkt, void *));
+
+			/* Process packet */
+			l2fwd_event_pre_forward(&ev, portid);
+
+			/*
+			 * Internal port is not available, the packet needs
+			 * to be enqueued to the designated event queue.
+			 */
+
+			/* Prepare event for submission to tx event queue */
+			l2fwd_event_switch_to_tx_queue(&ev, tx_queue);
+
+			/* Submit the updated event for tx stage */
+			rte_event_enqueue_burst(links[i].eventdev_id,
+					links[i].event_portid,
+					&ev,	/* events */
+					1	/* nb_events */);
+		}
+	}
+	goto clean_and_exit;
+
+clean_and_exit:
+	if (links != NULL)
+		rte_free(links);
+}
+
+static uint8_t
+l2fwd_eventmode_populate_wrkr_params(
+		struct rte_eventmode_helper_app_worker_params *wrkrs)
+{
+	uint8_t nb_wrkr_param = 0;
+	struct rte_eventmode_helper_app_worker_params *wrkr;
+
+	/* Save workers */
+	wrkr = wrkrs;
+
+	/* Non-burst no internal port (regular tx worker) */
+	wrkr->cap.burst = RTE_EVENTMODE_HELPER_RX_TYPE_NON_BURST;
+	wrkr->cap.tx_internal_port =
+			RTE_EVENTMODE_HELPER_TX_TYPE_NO_INTERNAL_PORT;
+	wrkr->worker_thread = l2fwd_eventmode_non_burst_no_internal_port;
+
+	nb_wrkr_param++;
+	return nb_wrkr_param;
+}
+
+static void
+l2fwd_eventmode_worker(struct rte_eventmode_helper_conf *mode_conf)
+{
+	struct rte_eventmode_helper_app_worker_params
+			l2fwd_wrkr[L2FWD_EVENTMODE_WORKERS] = {
+					{{{0} }, NULL } };
+	uint8_t nb_wrkr_param;
+
+	/* Populate l2fwd_wrkr params */
+	nb_wrkr_param = l2fwd_eventmode_populate_wrkr_params(l2fwd_wrkr);
+
+	/*
+	 * The helper function will launch the correct worker after checking the
+	 * event device's capabilities.
+	 */
+	rte_eventmode_helper_launch_worker(mode_conf, l2fwd_wrkr,
+			nb_wrkr_param);
+}
+
 int
-l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+l2fwd_launch_one_lcore(void *args)
 {
-	l2fwd_main_loop();
+	struct rte_eventmode_helper_conf *mode_conf;
+
+	mode_conf = (struct rte_eventmode_helper_conf *)args;
+
+	if (mode_conf->mode == RTE_EVENTMODE_HELPER_PKT_TRANSFER_MODE_POLL) {
+		/* App is initialized to run in poll mode */
+		l2fwd_poll_mode_worker();
+	} else if (mode_conf->mode ==
+			RTE_EVENTMODE_HELPER_PKT_TRANSFER_MODE_EVENT) {
+		/* App is initialized to run in event mode */
+		l2fwd_eventmode_worker(mode_conf);
+	}
 	return 0;
 }
diff --git a/examples/l2fwd-event/main.c b/examples/l2fwd-event/main.c
index 4e83b41..62228e6 100644
--- a/examples/l2fwd-event/main.c
+++ b/examples/l2fwd-event/main.c
@@ -39,6 +39,7 @@
 #include <rte_ethdev.h>
 #include <rte_mempool.h>
 #include <rte_mbuf.h>
+#include <rte_eventmode_helper.h>
 
 #include "l2fwd_common.h"
 #include "l2fwd_worker.h"
@@ -68,6 +69,8 @@ l2fwd_usage(const char *prgname)
 		" [-q NQ]",
 		prgname);
 
+	rte_eventmode_helper_print_options_list();
+
 	fprintf(stderr, "\n\n");
 
 	fprintf(stderr,
@@ -78,7 +81,9 @@ l2fwd_usage(const char *prgname)
 		"      When enabled:\n"
 		"       - The source MAC address is replaced by the TX port MAC address\n"
 		"       - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
-		"\n");
+		"");
+
+	rte_eventmode_helper_print_options_description();
 }
 
 static int
@@ -158,12 +163,14 @@ static const struct option lgopts[] = {
 
 /* Parse the argument given in the command line of the application */
 static int
-l2fwd_parse_args(int argc, char **argv)
+l2fwd_parse_args(int argc, char **argv,
+		struct rte_eventmode_helper_conf **mode_conf)
 {
-	int opt, ret, timer_secs;
+	int opt, timer_secs;
 	char **argvopt;
 	int option_index;
 	char *prgname = argv[0];
+	int options_parsed = 0;
 
 	argvopt = argv;
 
@@ -212,12 +219,31 @@ l2fwd_parse_args(int argc, char **argv)
 		}
 	}
 
-	if (optind >= 0)
-		argv[optind-1] = prgname;
+	/* Update argc & argv to move to event mode options */
+	options_parsed = optind-1;
+	argc -= options_parsed;
+	argv += options_parsed;
 
-	ret = optind-1;
-	optind = 1; /* reset getopt lib */
-	return ret;
+	/* Reset getopt lib */
+	optind = 1;
+
+	/* Check for event mode parameters and get the conf prepared*/
+	*mode_conf = rte_eventmode_helper_parse_args(argc, argv);
+	if (*mode_conf == NULL) {
+		l2fwd_usage(prgname);
+		return -1;
+	}
+
+	/* Add the number of options parsed */
+	options_parsed += optind-1;
+
+	if (options_parsed >= 0)
+		argv[options_parsed] = prgname;
+
+	/* Reset getopt lib */
+	optind = 1;
+
+	return options_parsed;
 }
 
 /* Check the link status of all ports in up to 9s, and print them finally */
@@ -315,6 +341,7 @@ main(int argc, char **argv)
 	unsigned int nb_ports_in_mask = 0;
 	unsigned int nb_lcores = 0;
 	unsigned int nb_mbufs;
+	struct rte_eventmode_helper_conf *mode_conf = NULL;
 
 	/* Set default values for global vars */
 	l2fwd_init_global_vars();
@@ -329,8 +356,12 @@ main(int argc, char **argv)
 	signal(SIGINT, signal_handler);
 	signal(SIGTERM, signal_handler);
 
-	/* parse application arguments (after the EAL ones) */
-	ret = l2fwd_parse_args(argc, argv);
+	/*
+	 * Parse application arguments (after the EAL ones). This would parse
+	 * the event mode options too, and would set the conf pointer
+	 * accordingly.
+	 */
+	ret = l2fwd_parse_args(argc, argv, &mode_conf);
 	if (ret < 0)
 		rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
 
@@ -519,9 +550,20 @@ main(int argc, char **argv)
 
 	check_all_ports_link_status(l2fwd_enabled_port_mask);
 
+	/*
+	 * Set the enabled port mask in helper conf to be used by helper
+	 * sub-system. This would be used while intializing devices using
+	 * helper sub-system.
+	 */
+	mode_conf->eth_portmask = l2fwd_enabled_port_mask;
+
+	/* Initialize eventmode components */
+	rte_eventmode_helper_initialize_devs(mode_conf);
+
 	ret = 0;
 	/* launch per-lcore init on every lcore */
-	rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, CALL_MASTER);
+	rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, (void *)mode_conf,
+			CALL_MASTER);
 	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
 		if (rte_eal_wait_lcore(lcore_id) < 0) {
 			ret = -1;
diff --git a/examples/l2fwd-event/meson.build b/examples/l2fwd-event/meson.build
index 1d2df49..10e6e66 100644
--- a/examples/l2fwd-event/meson.build
+++ b/examples/l2fwd-event/meson.build
@@ -6,6 +6,8 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
+allow_experimental_apis = true
+deps += ['eventdev']
 sources = files(
 	'l2fwd_worker.c',
 	'main.c'
-- 
2.7.4


  parent reply index

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 17:32 [dpdk-dev] [PATCH 00/39] adding eventmode helper library Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 01/39] examples/l2fwd-event: create copy of l2fwd Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 02/39] examples/l2fwd-event: move macros to common header Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 03/39] examples/l2fwd-event: move structures " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 04/39] examples/l2fwd-event: move global vars " Anoob Joseph
2019-06-07 10:02   ` Jerin Jacob Kollanukkaran
2019-06-07 10:45     ` Anoob Joseph
2019-06-07 12:47       ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 05/39] examples/l2fwd-event: move dataplane code to new file Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 06/39] examples/l2fwd-event: remove unused header includes Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 07/39] examples/l2fwd-event: move drain buffers to new function Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 08/39] examples/l2fwd-event: optimize check for master core Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 09/39] examples/l2fwd-event: move periodic tasks to new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 10/39] examples/l2fwd-event: do timer updates only on master Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 11/39] examples/l2fwd-event: move pkt send code to a new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 12/39] examples/l2fwd-event: use fprintf in usage print Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 13/39] examples/l2fwd-event: improvements to the " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 14/39] eventdev: add files for eventmode helper Anoob Joseph
2019-06-10 10:10   ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 15/39] eventdev: add routines for logging " Anoob Joseph
2019-06-10 10:12   ` Jerin Jacob Kollanukkaran
2019-06-17  9:09     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 16/39] eventdev: add eventmode CL options framework Anoob Joseph
2019-06-10 10:19   ` Jerin Jacob Kollanukkaran
2019-06-17 10:14     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 17/39] eventdev: allow application to set ethernet portmask Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 18/39] eventdev: add framework for eventmode conf Anoob Joseph
2019-06-10 10:06   ` Jerin Jacob Kollanukkaran
2019-06-20  7:26     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 19/39] eventdev: add common initialize routine for eventmode devs Anoob Joseph
2019-06-10 10:23   ` Jerin Jacob Kollanukkaran
2019-06-17 10:22     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 20/39] eventdev: add eventdevice init for eventmode Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 21/39] eventdev: add eventdev port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 22/39] eventdev: add option to specify schedule mode for app stage Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 23/39] eventdev: add placeholder for ethdev init Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 24/39] eventdev: add Rx adapter init in eventmode Anoob Joseph
2019-06-10 14:56   ` Carrillo, Erik G
2019-06-11  3:45     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 25/39] eventdev: add routine to validate conf Anoob Joseph
2019-06-10 10:25   ` Jerin Jacob Kollanukkaran
2019-06-17 10:23     ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 26/39] eventdev: add default conf for event devs field in conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 27/39] eventdev: add default conf for Rx adapter conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 28/39] eventdev: add default conf for event port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 29/39] eventdev: add routines to display the eventmode conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 30/39] eventdev: add routine to access eventmode link info Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 31/39] eventdev: add routine to access event queue for eth Tx Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 32/39] eventdev: add routine to launch eventmode workers Anoob Joseph
2019-06-10 14:31   ` Carrillo, Erik G
2019-06-17 10:34     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-10 14:46   ` [dpdk-dev] " Carrillo, Erik G
2019-06-27  5:50     ` Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 33/39] eventdev: add Tx adapter support Anoob Joseph
2019-06-11  8:58   ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 34/39] eventdev: add support for internal ports Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 35/39] eventdev: display Tx adapter conf Anoob Joseph
2019-06-03 17:32 ` Anoob Joseph [this message]
2019-06-03 17:32 ` [dpdk-dev] [PATCH 37/39] examples/l2fwd-event: add eventmode worker Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 38/39] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 39/39] " Anoob Joseph
2019-06-07  9:48 ` [dpdk-dev] [PATCH 00/39] adding eventmode helper library Jerin Jacob Kollanukkaran
2019-06-11 10:44   ` Mattias Rönnblom
2019-06-14  9:18     ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-17 13:23       ` Mattias Rönnblom
2019-06-20  3:44         ` Anoob Joseph
     [not found] <1559580584-5728-1-git-send-email-anoobj@marvell.com>
2019-06-03 16:49 ` [dpdk-dev] [PATCH 36/39] examples/l2fwd-event: add eventmode for l2fwd Anoob Joseph

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1559583160-13944-37-git-send-email-anoobj@marvell.com \
    --to=anoobj@marvell.com \
    --cc=abhinandan.gujjar@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinj@marvell.com \
    --cc=lbartosik@marvell.com \
    --cc=liang.j.ma@intel.com \
    --cc=mattias.ronnblom@ericsson.com \
    --cc=nikhil.rao@intel.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=pathreya@marvell.com \
    --cc=pbhagavatula@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox