Re: [PATCH 5/6] drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A panel support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Vasily,

Thank you for the patch.

On Thu, Feb 20, 2020 at 12:35:07AM -0800, Vasily Khoruzhick wrote:
> This commit adds support for the NewEast Optoelectronics CO., LTD
> WJFH116008A 11.6" 1920x1080 TFT LCD panel.
> 
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 47 ++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index e14c14ac62b5..aa04afaf3d26 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2224,6 +2224,50 @@ static const struct panel_desc netron_dy_e231732 = {
>  	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
>  };
>  
> +static const struct drm_display_mode neweast_wjfh116008a_modes[] = {
> +{
> +	.clock = 138500,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 48,
> +	.hsync_end = 1920 + 48 + 32,
> +	.htotal = 1920 + 48 + 32 + 80,
> +	.vdisplay = 1080,
> +	.vsync_start = 1080 + 3,
> +	.vsync_end = 1080 + 3 + 5,
> +	.vtotal = 1080 + 3 + 5 + 23,
> +	.vrefresh = 60,
> +	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +}, {
> +	.clock = 110920,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 48,
> +	.hsync_end = 1920 + 48 + 32,
> +	.htotal = 1920 + 48 + 32 + 80,
> +	.vdisplay = 1080,
> +	.vsync_start = 1080 + 3,
> +	.vsync_end = 1080 + 3 + 5,
> +	.vtotal = 1080 + 3 + 5 + 23,
> +	.vrefresh = 48,
> +	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +} };

This should be indented one step to the right, see boe_nv101wxmn51_modes
for instance.

The only different between the two modes is the clock, leading to
different refresh rates. Are only those two clock frequencies supported,
or does the panel support anything in-between as well ? In the latter
case, would it make sense to use display_timing instead of
drm_display_mode ? See dlc_dlc0700yzg_1_timing for an example.

> +
> +static const struct panel_desc neweast_wjfh116008a = {
> +	.modes = neweast_wjfh116008a_modes,
> +	.num_modes = 2,
> +	.bpc = 6,
> +	.size = {
> +		.width = 260,
> +		.height = 150,
> +	},
> +	.delay = {
> +		.prepare = 110,
> +		.enable = 20,
> +		.unprepare = 500,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> +	.connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
> +
>  static const struct drm_display_mode newhaven_nhd_43_480272ef_atxl_mode = {
>  	.clock = 9000,
>  	.hdisplay = 480,
> @@ -3399,6 +3443,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "netron-dy,e231732",
>  		.data = &netron_dy_e231732,
> +	}, {
> +		.compatible = "neweast,wjfh116008a",
> +		.data = &neweast_wjfh116008a,
>  	}, {
>  		.compatible = "newhaven,nhd-4.3-480272ef-atxl",
>  		.data = &newhaven_nhd_43_480272ef_atxl,

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel