From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, kraxel@redhat.com,
noralf@tronnes.org, sam@ravnborg.org, emil.velikov@collabora.com,
john.p.donnelly@oracle.com
Cc: John Donnelly <John.p.donnelly@oracle.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
dri-devel@lists.freedesktop.org
Subject: [PATCH v3 04/15] drm/mgag200: Move mode-setting code into separate helper function
Date: Fri, 15 May 2020 10:32:22 +0200 [thread overview]
Message-ID: <20200515083233.32036-5-tzimmermann@suse.de> (raw)
In-Reply-To: <20200515083233.32036-1-tzimmermann@suse.de>
The mode-setting code is now located in mgag200_set_mode_regs(), sans
a few flags that will be moved in a later patch for clarity.
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
---
drivers/gpu/drm/mgag200/mgag200_mode.c | 140 ++++++++++++++-----------
1 file changed, 78 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 9aa6addbbb895..7c41bd43f79e0 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -911,6 +911,79 @@ static int mga_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
return mga_crtc_do_set_base(mdev, fb, old_fb);
}
+static void mgag200_set_mode_regs(struct mga_device *mdev,
+ const struct drm_display_mode *mode)
+{
+ unsigned int hdisplay, hsyncstart, hsyncend, htotal;
+ unsigned int vdisplay, vsyncstart, vsyncend, vtotal;
+ u8 misc = 0;
+ u8 crtcext1, crtcext2, crtcext5;
+
+ hdisplay = mode->hdisplay / 8 - 1;
+ hsyncstart = mode->hsync_start / 8 - 1;
+ hsyncend = mode->hsync_end / 8 - 1;
+ htotal = mode->htotal / 8 - 1;
+
+ /* Work around hardware quirk */
+ if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04)
+ htotal++;
+
+ vdisplay = mode->vdisplay - 1;
+ vsyncstart = mode->vsync_start - 1;
+ vsyncend = mode->vsync_end - 1;
+ vtotal = mode->vtotal - 2;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ misc |= 0x40;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ misc |= 0x80;
+
+ crtcext1 = (((htotal - 4) & 0x100) >> 8) |
+ ((hdisplay & 0x100) >> 7) |
+ ((hsyncstart & 0x100) >> 6) |
+ (htotal & 0x40);
+ if (mdev->type == G200_WB || mdev->type == G200_EW3)
+ crtcext1 |= BIT(7) | /* vrsten */
+ BIT(3); /* hrsten */
+
+ crtcext2 = ((vtotal & 0xc00) >> 10) |
+ ((vdisplay & 0x400) >> 8) |
+ ((vdisplay & 0xc00) >> 7) |
+ ((vsyncstart & 0xc00) >> 5) |
+ ((vdisplay & 0x400) >> 3);
+ crtcext5 = 0x00;
+
+ WREG_CRT(0, htotal - 4);
+ WREG_CRT(1, hdisplay);
+ WREG_CRT(2, hdisplay);
+ WREG_CRT(3, (htotal & 0x1F) | 0x80);
+ WREG_CRT(4, hsyncstart);
+ WREG_CRT(5, ((htotal & 0x20) << 2) | (hsyncend & 0x1F));
+ WREG_CRT(6, vtotal & 0xFF);
+ WREG_CRT(7, ((vtotal & 0x100) >> 8) |
+ ((vdisplay & 0x100) >> 7) |
+ ((vsyncstart & 0x100) >> 6) |
+ ((vdisplay & 0x100) >> 5) |
+ ((vdisplay & 0x100) >> 4) | /* linecomp */
+ ((vtotal & 0x200) >> 4) |
+ ((vdisplay & 0x200) >> 3) |
+ ((vsyncstart & 0x200) >> 2));
+ WREG_CRT(9, ((vdisplay & 0x200) >> 4) |
+ ((vdisplay & 0x200) >> 3));
+ WREG_CRT(16, vsyncstart & 0xFF);
+ WREG_CRT(17, (vsyncend & 0x0F) | 0x20);
+ WREG_CRT(18, vdisplay & 0xFF);
+ WREG_CRT(20, 0);
+ WREG_CRT(21, vdisplay & 0xFF);
+ WREG_CRT(22, (vtotal + 1) & 0xFF);
+ WREG_CRT(23, 0xc3);
+ WREG_CRT(24, vdisplay & 0xFF);
+
+ WREG_ECRT(0x01, crtcext1);
+ WREG_ECRT(0x02, crtcext2);
+ WREG_ECRT(0x05, crtcext5);
+}
+
static int mga_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -919,8 +992,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = to_mga_device(dev);
const struct drm_framebuffer *fb = crtc->primary->fb;
- int hdisplay, hsyncstart, hsyncend, htotal;
- int vdisplay, vsyncstart, vsyncend, vtotal;
int pitch;
int option = 0, option2 = 0;
int i;
@@ -999,12 +1070,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
break;
}
- if (mode->flags & DRM_MODE_FLAG_NHSYNC)
- misc |= 0x40;
- if (mode->flags & DRM_MODE_FLAG_NVSYNC)
- misc |= 0x80;
-
-
for (i = 0; i < sizeof(dacvalue); i++) {
if ((i <= 0x17) ||
(i == 0x1b) ||
@@ -1044,20 +1109,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
else
pitch = pitch >> (4 - bppshift);
- hdisplay = mode->hdisplay / 8 - 1;
- hsyncstart = mode->hsync_start / 8 - 1;
- hsyncend = mode->hsync_end / 8 - 1;
- htotal = mode->htotal / 8 - 1;
-
- /* Work around hardware quirk */
- if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04)
- htotal++;
-
- vdisplay = mode->vdisplay - 1;
- vsyncstart = mode->vsync_start - 1;
- vsyncend = mode->vsync_end - 1;
- vtotal = mode->vtotal - 2;
-
WREG_GFX(0, 0);
WREG_GFX(1, 0);
WREG_GFX(2, 0);
@@ -1068,61 +1119,26 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
WREG_GFX(7, 0xf);
WREG_GFX(8, 0xf);
- WREG_CRT(0, htotal - 4);
- WREG_CRT(1, hdisplay);
- WREG_CRT(2, hdisplay);
- WREG_CRT(3, (htotal & 0x1F) | 0x80);
- WREG_CRT(4, hsyncstart);
- WREG_CRT(5, ((htotal & 0x20) << 2) | (hsyncend & 0x1F));
- WREG_CRT(6, vtotal & 0xFF);
- WREG_CRT(7, ((vtotal & 0x100) >> 8) |
- ((vdisplay & 0x100) >> 7) |
- ((vsyncstart & 0x100) >> 6) |
- ((vdisplay & 0x100) >> 5) |
- ((vdisplay & 0x100) >> 4) | /* linecomp */
- ((vtotal & 0x200) >> 4)|
- ((vdisplay & 0x200) >> 3) |
- ((vsyncstart & 0x200) >> 2));
- WREG_CRT(9, ((vdisplay & 0x200) >> 4) |
- ((vdisplay & 0x200) >> 3));
WREG_CRT(10, 0);
WREG_CRT(11, 0);
WREG_CRT(12, 0);
WREG_CRT(13, 0);
WREG_CRT(14, 0);
WREG_CRT(15, 0);
- WREG_CRT(16, vsyncstart & 0xFF);
- WREG_CRT(17, (vsyncend & 0x0F) | 0x20);
- WREG_CRT(18, vdisplay & 0xFF);
WREG_CRT(19, pitch & 0xFF);
- WREG_CRT(20, 0);
- WREG_CRT(21, vdisplay & 0xFF);
- WREG_CRT(22, (vtotal + 1) & 0xFF);
- WREG_CRT(23, 0xc3);
- WREG_CRT(24, vdisplay & 0xFF);
+
+ mgag200_set_mode_regs(mdev, mode);
ext_vga[0] = 0;
- ext_vga[5] = 0;
/* TODO interlace */
ext_vga[0] |= (pitch & 0x300) >> 4;
- ext_vga[1] = (((htotal - 4) & 0x100) >> 8) |
- ((hdisplay & 0x100) >> 7) |
- ((hsyncstart & 0x100) >> 6) |
- (htotal & 0x40);
- ext_vga[2] = ((vtotal & 0xc00) >> 10) |
- ((vdisplay & 0x400) >> 8) |
- ((vdisplay & 0xc00) >> 7) |
- ((vsyncstart & 0xc00) >> 5) |
- ((vdisplay & 0x400) >> 3);
if (fb->format->cpp[0] * 8 == 24)
ext_vga[3] = (((1 << bppshift) * 3) - 1) | 0x80;
else
ext_vga[3] = ((1 << bppshift) - 1) | 0x80;
ext_vga[4] = 0;
- if (mdev->type == G200_WB || mdev->type == G200_EW3)
- ext_vga[1] |= 0x88;
/* Set pixel clocks */
misc = 0x2d;
@@ -1130,9 +1146,9 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
mga_crtc_set_plls(mdev, mode->clock);
- for (i = 0; i < 6; i++) {
- WREG_ECRT(i, ext_vga[i]);
- }
+ WREG_ECRT(0, ext_vga[0]);
+ WREG_ECRT(3, ext_vga[3]);
+ WREG_ECRT(4, ext_vga[4]);
if (mdev->type == G200_ER)
WREG_ECRT(0x24, 0x5);
--
2.26.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-05-15 8:32 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-15 8:32 [PATCH v3 00/15] drm/mgag200: Convert to atomic modesetting Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 01/15] drm/mgag200: Remove HW cursor Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 02/15] drm/mgag200: Clean up mga_set_start_address() Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 03/15] drm/mgag200: Clean up mga_crtc_do_set_base() Thomas Zimmermann
2020-05-15 8:32 ` Thomas Zimmermann [this message]
2020-05-15 8:32 ` [PATCH v3 05/15] drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O Thomas Zimmermann
2020-06-03 9:09 ` [drm/mgag200] e44e907dd8: phoronix-test-suite.glmark2.800x600.score -64.9% regression kernel test robot
2020-06-15 20:58 ` Emil Velikov
2020-06-16 3:10 ` Rong Chen
2020-06-16 3:29 ` [LKP] " Rong Chen
2020-06-16 13:49 ` Emil Velikov
2020-06-17 1:35 ` Rong Chen
2020-06-16 13:49 ` Thomas Zimmermann
2020-06-17 1:42 ` Rong Chen
2020-06-16 14:24 ` Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 06/15] drm/mgag200: Update mode registers after plane registers Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 07/15] drm/mgag200: Set pitch in a separate helper function Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 08/15] drm/mgag200: Set primary plane's format in " Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 09/15] drm/mgag200: Move TAGFIFO reset into separate function Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 10/15] drm/mgag200: Move hiprilvl setting into separate functions Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 11/15] drm/mgag200: Move register initialization into separate function Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 12/15] drm/mgag200: Remove out-commented suspend/resume helpers Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 13/15] drm/mgag200: Use simple-display data structures Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 14/15] drm/mgag200: Convert to simple KMS helper Thomas Zimmermann
2020-05-15 8:32 ` [PATCH v3 15/15] drm/mgag200: Replace VRAM helpers with SHMEM helpers Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200515083233.32036-5-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=emil.velikov@collabora.com \
--cc=john.p.donnelly@oracle.com \
--cc=kraxel@redhat.com \
--cc=noralf@tronnes.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).