[PATCH v2 0/3] drm/panel: mantix panel reset fixes

[PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

The first patch in this series fixes dereferencing a NULL mode in the error
path. The second one extends the resets to not only reset RESX but also TP_RSTN
since otherwise the display will stay completely blank. I didn't spot that
before initial submission since the reset line was bound to the touch
controller and although that failed to probe it came far enough to deassert the
reset line (at an arbitrary point in time during boot) and hence we got a
picture. Since touch and panel are on the same IC they're not completely
independent and i might have to turn the whole thing into an MFD at some point
but this series gets the panel to a reliably working state on boot and on fb
blank/unblank.

Since the reset-gpios are active low we can deassert in prepare and assert in
unprepare simplifying the code making sure lines are kept low when the
panel is off.

The binding were not part of a stable kernel so I hope it's okay to not worry
about backward compatibility.

Changes from v1:
 - As per review comments by Fabio Estevam
   https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
   - Fix typo in commit messages
 - As per review comments by Rob Herring
   https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
   - Don't use an array of reset lines

Guido Günther (3):
  drm/panel: mantix: Don't dereference NULL mode
  drm/panel: mantix: Fix panel reset
  dt-binding: display: Require two resets on mantix panel

 .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
 2 files changed, 21 insertions(+), 8 deletions(-)

-- 
2.28.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode

[Guido Günther]

Don't dereference mode which was just NULL checked.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 3482e28e30fc..4a7fbf64bb7a 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -204,7 +204,7 @@ static int mantix_get_modes(struct drm_panel *panel,
 	if (!mode) {
 		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
 			default_mode.hdisplay, default_mode.vdisplay,
-			drm_mode_vrefresh(mode));
+			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;
 	}
 
-- 
2.28.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 2/3] drm/panel: mantix: Fix panel reset

[Guido Günther]

The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 23 +++++++++++++------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 4a7fbf64bb7a..0c5f22e95c2d 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -26,7 +26,9 @@
 struct mantix {
 	struct device *dev;
 	struct drm_panel panel;
+
 	struct gpio_desc *reset_gpio;
+	struct gpio_desc *tp_rstn_gpio;
 
 	struct regulator *avdd;
 	struct regulator *avee;
@@ -124,6 +126,10 @@ static int mantix_unprepare(struct drm_panel *panel)
 {
 	struct mantix *ctx = panel_to_mantix(panel);
 
+	gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
 	regulator_disable(ctx->avee);
 	regulator_disable(ctx->avdd);
 	/* T11 */
@@ -165,13 +171,10 @@ static int mantix_prepare(struct drm_panel *panel)
 		return ret;
 	}
 
-	/* T3+T5 */
-	usleep_range(10000, 12000);
-
-	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-	usleep_range(5150, 7000);
-
+	/* T3 + T4 + time for voltage to become stable: */
+	usleep_range(6000, 7000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 0);
 
 	/* T6 */
 	msleep(50);
@@ -236,12 +239,18 @@ static int mantix_probe(struct mipi_dsi_device *dsi)
 	if (!ctx)
 		return -ENOMEM;
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset gpio\n");
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
+	ctx->tp_rstn_gpio = devm_gpiod_get(dev, "mantix,tp-rstn", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->tp_rstn_gpio)) {
+		dev_err(dev, "cannot get tp-rstn gpio\n");
+		return PTR_ERR(ctx->tp_rstn_gpio);
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 	ctx->dev = dev;
 
-- 
2.28.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 3/3] dt-binding: display: Require two resets on mantix panel

[Guido Günther]

We need to reset both for the panel to show an image.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../bindings/display/panel/mantix,mlaf057we51-x.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
index 937323cc9aaa..51f423297ec8 100644
--- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -37,6 +37,9 @@ properties:
 
   reset-gpios: true
 
+  'mantix,tp-rstn-gpios':
+    description: second reset line that triggers DSI config load
+
   backlight: true
 
 required:
@@ -63,6 +66,7 @@ examples:
             avee-supply = <&reg_avee>;
             vddi-supply = <&reg_1v8_p>;
             reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
             backlight = <&backlight>;
         };
     };
-- 
2.28.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Sam Ravnborg]

Hi Guido.
On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> 
> The first patch in this series fixes dereferencing a NULL mode in the error
> path. The second one extends the resets to not only reset RESX but also TP_RSTN
> since otherwise the display will stay completely blank. I didn't spot that
> before initial submission since the reset line was bound to the touch
> controller and although that failed to probe it came far enough to deassert the
> reset line (at an arbitrary point in time during boot) and hence we got a
> picture. Since touch and panel are on the same IC they're not completely
> independent and i might have to turn the whole thing into an MFD at some point
> but this series gets the panel to a reliably working state on boot and on fb
> blank/unblank.
> 
> Since the reset-gpios are active low we can deassert in prepare and assert in
> unprepare simplifying the code making sure lines are kept low when the
> panel is off.
> 
> The binding were not part of a stable kernel so I hope it's okay to not worry
> about backward compatibility.
> 
> Changes from v1:
>  - As per review comments by Fabio Estevam
>    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
>    - Fix typo in commit messages
>  - As per review comments by Rob Herring
>    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
>    - Don't use an array of reset lines
> 
> Guido Günther (3):
>   drm/panel: mantix: Don't dereference NULL mode
>   drm/panel: mantix: Fix panel reset
>   dt-binding: display: Require two resets on mantix panel

All applied to drm-misc-next and pushed out.
And then I remembered you had commit right - sigh.

	Sam

> 
>  .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
>  .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
>  2 files changed, 21 insertions(+), 8 deletions(-)
> 
> -- 
> 2.28.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

Hi Sam,
On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
[..snip..]
> > 
> > Changes from v1:
> >  - As per review comments by Fabio Estevam
> >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> >    - Fix typo in commit messages
> >  - As per review comments by Rob Herring
> >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> >    - Don't use an array of reset lines
> > 
> > Guido Günther (3):
> >   drm/panel: mantix: Don't dereference NULL mode
> >   drm/panel: mantix: Fix panel reset
> >   dt-binding: display: Require two resets on mantix panel
> 
> All applied to drm-misc-next and pushed out.
> And then I remembered you had commit right - sigh.

Thanks! Is there any special care needed to get that into 5.10? The
driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
Cheers,
 -- Guido

> 
> 	Sam
> 
> > 
> >  .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
> >  .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
> >  2 files changed, 21 insertions(+), 8 deletions(-)
> > 
> > -- 
> > 2.28.0
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Sam Ravnborg]

Hi Guido.

On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> Hi Sam,
> On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> [..snip..]
> > > 
> > > Changes from v1:
> > >  - As per review comments by Fabio Estevam
> > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > >    - Fix typo in commit messages
> > >  - As per review comments by Rob Herring
> > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > >    - Don't use an array of reset lines
> > > 
> > > Guido Günther (3):
> > >   drm/panel: mantix: Don't dereference NULL mode
> > >   drm/panel: mantix: Fix panel reset
> > >   dt-binding: display: Require two resets on mantix panel
> > 
> > All applied to drm-misc-next and pushed out.
> > And then I remembered you had commit right - sigh.
> 
> Thanks! Is there any special care needed to get that into 5.10? The
> driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.

As the patches was applied to drm-misc-next the easiet path would
be to cherry-pick them and apply to drm-misc-fixes.
dim has cherry-pick support - try to use it rahter than doing it by
hand.

When you apply to drm-misc-fixes include a Fixes: tag so the tooling
will pick the patches automagically.

In hindsight the patches should have carried a Fixes: tag from a start
and should have been applied to drm-misc-fixes from a start too.

I have done something like above once or twice but anyway reach out if
you have questions. Or ask at #dri-devel.

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

Hi Sam,
On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> 
> On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > [..snip..]
> > > > 
> > > > Changes from v1:
> > > >  - As per review comments by Fabio Estevam
> > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > >    - Fix typo in commit messages
> > > >  - As per review comments by Rob Herring
> > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > >    - Don't use an array of reset lines
> > > > 
> > > > Guido Günther (3):
> > > >   drm/panel: mantix: Don't dereference NULL mode
> > > >   drm/panel: mantix: Fix panel reset
> > > >   dt-binding: display: Require two resets on mantix panel
> > > 
> > > All applied to drm-misc-next and pushed out.
> > > And then I remembered you had commit right - sigh.
> > 
> > Thanks! Is there any special care needed to get that into 5.10? The
> > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> 
> As the patches was applied to drm-misc-next the easiet path would
> be to cherry-pick them and apply to drm-misc-fixes.
> dim has cherry-pick support - try to use it rahter than doing it by
> hand.

Does that require any further ACKs or just cherry-pick and push out?

> When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> will pick the patches automagically.

Will do. It was unfortunate that the initial ones didn't get them but
i think the drm merge happened while v2 was out on the list. I'll try
add that relevant information to the cover letter in the future.

Cheers,
 -- Guido

> 
> In hindsight the patches should have carried a Fixes: tag from a start
> and should have been applied to drm-misc-fixes from a start too.
> 
> I have done something like above once or twice but anyway reach out if
> you have questions. Or ask at #dri-devel.
> 
> 	Sam
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Sam Ravnborg]

 Hi Guido
> On Sun, Oct 18, 2020 at 03:01:22PM +0200, Guido Günther wrote:
> Hi Sam,
> On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> > 
> > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > Hi Sam,
> > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > Hi Guido.
> > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > [..snip..]
> > > > > 
> > > > > Changes from v1:
> > > > >  - As per review comments by Fabio Estevam
> > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > >    - Fix typo in commit messages
> > > > >  - As per review comments by Rob Herring
> > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > >    - Don't use an array of reset lines
> > > > > 
> > > > > Guido Günther (3):
> > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > >   drm/panel: mantix: Fix panel reset
> > > > >   dt-binding: display: Require two resets on mantix panel
> > > > 
> > > > All applied to drm-misc-next and pushed out.
> > > > And then I remembered you had commit right - sigh.
> > > 
> > > Thanks! Is there any special care needed to get that into 5.10? The
> > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > 
> > As the patches was applied to drm-misc-next the easiet path would
> > be to cherry-pick them and apply to drm-misc-fixes.
> > dim has cherry-pick support - try to use it rahter than doing it by
> > hand.
> 
> Does that require any further ACKs or just cherry-pick and push out?
To the best of my knowledge just cherry-pick, test and push out.

	Sam

> 
> > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > will pick the patches automagically.
> 
> Will do. It was unfortunate that the initial ones didn't get them but
> i think the drm merge happened while v2 was out on the list. I'll try
> add that relevant information to the cover letter in the future.
> 
> Cheers,
>  -- Guido
> 
> > 
> > In hindsight the patches should have carried a Fixes: tag from a start
> > and should have been applied to drm-misc-fixes from a start too.
> > 
> > I have done something like above once or twice but anyway reach out if
> > you have questions. Or ask at #dri-devel.
> > 
> > 	Sam
> > 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

Hi,
On Sun, Oct 18, 2020 at 03:38:45PM +0200, Sam Ravnborg wrote:
>  Hi Guido
> > On Sun, Oct 18, 2020 at 03:01:22PM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > 
> > > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > > Hi Sam,
> > > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > > Hi Guido.
> > > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > > [..snip..]
> > > > > > 
> > > > > > Changes from v1:
> > > > > >  - As per review comments by Fabio Estevam
> > > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > > >    - Fix typo in commit messages
> > > > > >  - As per review comments by Rob Herring
> > > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > > >    - Don't use an array of reset lines
> > > > > > 
> > > > > > Guido Günther (3):
> > > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > > >   drm/panel: mantix: Fix panel reset
> > > > > >   dt-binding: display: Require two resets on mantix panel
> > > > > 
> > > > > All applied to drm-misc-next and pushed out.
> > > > > And then I remembered you had commit right - sigh.
> > > > 
> > > > Thanks! Is there any special care needed to get that into 5.10? The
> > > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > > 
> > > As the patches was applied to drm-misc-next the easiet path would
> > > be to cherry-pick them and apply to drm-misc-fixes.
> > > dim has cherry-pick support - try to use it rahter than doing it by
> > > hand.
> > 
> > Does that require any further ACKs or just cherry-pick and push out?
> To the best of my knowledge just cherry-pick, test and push out.

drm-misc-fixes does not yet have the corresponding code so i assume i
have to wait for back merge of 5.10-rc1 ? At least

   https://drm.pages.freedesktop.org/maintainer-tools/drm-misc.html

seems to indicate that.
Cheers,
 -- Guido

> 
> 	Sam
> 
> > 
> > > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > > will pick the patches automagically.
> > 
> > Will do. It was unfortunate that the initial ones didn't get them but
> > i think the drm merge happened while v2 was out on the list. I'll try
> > add that relevant information to the cover letter in the future.
> > 
> > Cheers,
> >  -- Guido
> > 
> > > 
> > > In hindsight the patches should have carried a Fixes: tag from a start
> > > and should have been applied to drm-misc-fixes from a start too.
> > > 
> > > I have done something like above once or twice but anyway reach out if
> > > you have questions. Or ask at #dri-devel.
> > > 
> > > 	Sam
> > > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Daniel Vetter]

On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> 
> On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > [..snip..]
> > > > 
> > > > Changes from v1:
> > > >  - As per review comments by Fabio Estevam
> > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > >    - Fix typo in commit messages
> > > >  - As per review comments by Rob Herring
> > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > >    - Don't use an array of reset lines
> > > > 
> > > > Guido Günther (3):
> > > >   drm/panel: mantix: Don't dereference NULL mode
> > > >   drm/panel: mantix: Fix panel reset
> > > >   dt-binding: display: Require two resets on mantix panel
> > > 
> > > All applied to drm-misc-next and pushed out.
> > > And then I remembered you had commit right - sigh.
> > 
> > Thanks! Is there any special care needed to get that into 5.10? The
> > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> 
> As the patches was applied to drm-misc-next the easiet path would
> be to cherry-pick them and apply to drm-misc-fixes.
> dim has cherry-pick support - try to use it rahter than doing it by
> hand.

drm-misc-next-fixes while we're between freeze and merge window end:

https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch

Cheers, Daniel

> 

> When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> will pick the patches automagically.
> 
> In hindsight the patches should have carried a Fixes: tag from a start
> and should have been applied to drm-misc-fixes from a start too.
> 
> I have done something like above once or twice but anyway reach out if
> you have questions. Or ask at #dri-devel.
> 
> 	Sam

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

Hi Daniel, Sam,
On Mon, Oct 19, 2020 at 05:44:37PM +0200, Daniel Vetter wrote:
> On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> > 
> > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > Hi Sam,
> > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > Hi Guido.
> > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > [..snip..]
> > > > > 
> > > > > Changes from v1:
> > > > >  - As per review comments by Fabio Estevam
> > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > >    - Fix typo in commit messages
> > > > >  - As per review comments by Rob Herring
> > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > >    - Don't use an array of reset lines
> > > > > 
> > > > > Guido Günther (3):
> > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > >   drm/panel: mantix: Fix panel reset
> > > > >   dt-binding: display: Require two resets on mantix panel
> > > > 
> > > > All applied to drm-misc-next and pushed out.
> > > > And then I remembered you had commit right - sigh.
> > > 
> > > Thanks! Is there any special care needed to get that into 5.10? The
> > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > 
> > As the patches was applied to drm-misc-next the easiet path would
> > be to cherry-pick them and apply to drm-misc-fixes.
> > dim has cherry-pick support - try to use it rahter than doing it by
> > hand.
> 
> drm-misc-next-fixes while we're between freeze and merge window end:
> 
> https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch

Great. Thanks for the pointer, that works. Now i get:

  $ ../maintainer-tools/dim push --dry-run
  dim: 3532f0117258 ("dt-binding: display: Require two resets on mantix panel"): mandatory review missing.
  dim: c90f95ad6d05 ("drm/panel: mantix: Fix panel reset"): mandatory review missing.
  dim: 8b557f793e69 ("drm/panel: mantix: Don't dereference NULL mode"): mandatory review missing.
  dim: ERROR: issues in commits detected, aborting

and in fact there's only Signed-off-by's on it:

  Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
  Signed-off-by: Guido Günther <agx@sigxcpu.org>
  Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
  Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org

Sam, I assume your Signed-off-by's should have been Reviewed-by ?
O.k. to fix that up in the commit message before pushing to
drm-misc-next?

Cheers,
 -- Guido

> 
> Cheers, Daniel
> 
> > 
> 
> > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > will pick the patches automagically.
> > 
> > In hindsight the patches should have carried a Fixes: tag from a start
> > and should have been applied to drm-misc-fixes from a start too.
> > 
> > I have done something like above once or twice but anyway reach out if
> > you have questions. Or ask at #dri-devel.
> > 
> > 	Sam
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Sam Ravnborg]

Hi Guido.

On Tue, Oct 20, 2020 at 01:57:11PM +0200, Guido Günther wrote:
> Hi Daniel, Sam,
> On Mon, Oct 19, 2020 at 05:44:37PM +0200, Daniel Vetter wrote:
> > On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > 
> > > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > > Hi Sam,
> > > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > > Hi Guido.
> > > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > > [..snip..]
> > > > > > 
> > > > > > Changes from v1:
> > > > > >  - As per review comments by Fabio Estevam
> > > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > > >    - Fix typo in commit messages
> > > > > >  - As per review comments by Rob Herring
> > > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > > >    - Don't use an array of reset lines
> > > > > > 
> > > > > > Guido Günther (3):
> > > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > > >   drm/panel: mantix: Fix panel reset
> > > > > >   dt-binding: display: Require two resets on mantix panel
> > > > > 
> > > > > All applied to drm-misc-next and pushed out.
> > > > > And then I remembered you had commit right - sigh.
> > > > 
> > > > Thanks! Is there any special care needed to get that into 5.10? The
> > > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > > 
> > > As the patches was applied to drm-misc-next the easiet path would
> > > be to cherry-pick them and apply to drm-misc-fixes.
> > > dim has cherry-pick support - try to use it rahter than doing it by
> > > hand.
> > 
> > drm-misc-next-fixes while we're between freeze and merge window end:
> > 
> > https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch
> 
> Great. Thanks for the pointer, that works. Now i get:
> 
>   $ ../maintainer-tools/dim push --dry-run
>   dim: 3532f0117258 ("dt-binding: display: Require two resets on mantix panel"): mandatory review missing.
>   dim: c90f95ad6d05 ("drm/panel: mantix: Fix panel reset"): mandatory review missing.
>   dim: 8b557f793e69 ("drm/panel: mantix: Don't dereference NULL mode"): mandatory review missing.
>   dim: ERROR: issues in commits detected, aborting
> 
> and in fact there's only Signed-off-by's on it:
> 
>   Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
>   Signed-off-by: Guido Günther <agx@sigxcpu.org>
>   Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
>   Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
> 
> Sam, I assume your Signed-off-by's should have been Reviewed-by ?
> O.k. to fix that up in the commit message before pushing to
> drm-misc-next?
Fine to add my r-b.

For patches I push I always read the patch - but seldom claim that I
review them. It seems a bit implicit I think - but maybe this is just
bad practice on my side.

Then I also avoid the endless discussion with myself it what I did
warrant an a-b or r-b.

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Daniel Vetter]

On Tue, Oct 20, 2020 at 01:57:11PM +0200, Guido Günther wrote:
> Hi Daniel, Sam,
> On Mon, Oct 19, 2020 at 05:44:37PM +0200, Daniel Vetter wrote:
> > On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > 
> > > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > > Hi Sam,
> > > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > > Hi Guido.
> > > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > > [..snip..]
> > > > > > 
> > > > > > Changes from v1:
> > > > > >  - As per review comments by Fabio Estevam
> > > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > > >    - Fix typo in commit messages
> > > > > >  - As per review comments by Rob Herring
> > > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > > >    - Don't use an array of reset lines
> > > > > > 
> > > > > > Guido Günther (3):
> > > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > > >   drm/panel: mantix: Fix panel reset
> > > > > >   dt-binding: display: Require two resets on mantix panel
> > > > > 
> > > > > All applied to drm-misc-next and pushed out.
> > > > > And then I remembered you had commit right - sigh.
> > > > 
> > > > Thanks! Is there any special care needed to get that into 5.10? The
> > > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > > 
> > > As the patches was applied to drm-misc-next the easiet path would
> > > be to cherry-pick them and apply to drm-misc-fixes.
> > > dim has cherry-pick support - try to use it rahter than doing it by
> > > hand.
> > 
> > drm-misc-next-fixes while we're between freeze and merge window end:
> > 
> > https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch
> 
> Great. Thanks for the pointer, that works. Now i get:
> 
>   $ ../maintainer-tools/dim push --dry-run
>   dim: 3532f0117258 ("dt-binding: display: Require two resets on mantix panel"): mandatory review missing.
>   dim: c90f95ad6d05 ("drm/panel: mantix: Fix panel reset"): mandatory review missing.
>   dim: 8b557f793e69 ("drm/panel: mantix: Don't dereference NULL mode"): mandatory review missing.
>   dim: ERROR: issues in commits detected, aborting

Ah yes, if author != committer then dim assumes there has been some
oversight and review.

But when you cherry-pick over then it's again author == committer and in
that case dim is looking for an a-b or r-b line, hence why the cherry-pick
fails.

For a bit of context.
-Daniel

> and in fact there's only Signed-off-by's on it:
> 
>   Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
>   Signed-off-by: Guido Günther <agx@sigxcpu.org>
>   Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
>   Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
> 
> Sam, I assume your Signed-off-by's should have been Reviewed-by ?
> O.k. to fix that up in the commit message before pushing to
> drm-misc-next?
> 
> Cheers,
>  -- Guido
> 
> > 
> > Cheers, Daniel
> > 
> > > 
> > 
> > > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > > will pick the patches automagically.
> > > 
> > > In hindsight the patches should have carried a Fixes: tag from a start
> > > and should have been applied to drm-misc-fixes from a start too.
> > > 
> > > I have done something like above once or twice but anyway reach out if
> > > you have questions. Or ask at #dri-devel.
> > > 
> > > 	Sam
> > 
> > -- 
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> > 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes

[Guido Günther]

Hi Sam,
On Thu, Oct 22, 2020 at 06:59:29AM +0200, Sam Ravnborg wrote:
> Hi Guido.
> 
> On Tue, Oct 20, 2020 at 01:57:11PM +0200, Guido Günther wrote:
> > Hi Daniel, Sam,
> > On Mon, Oct 19, 2020 at 05:44:37PM +0200, Daniel Vetter wrote:
> > > On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > > > Hi Guido.
> > > > 
> > > > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > > > Hi Sam,
> > > > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > > > Hi Guido.
> > > > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > > > [..snip..]
> > > > > > > 
> > > > > > > Changes from v1:
> > > > > > >  - As per review comments by Fabio Estevam
> > > > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > > > >    - Fix typo in commit messages
> > > > > > >  - As per review comments by Rob Herring
> > > > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > > > >    - Don't use an array of reset lines
> > > > > > > 
> > > > > > > Guido Günther (3):
> > > > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > > > >   drm/panel: mantix: Fix panel reset
> > > > > > >   dt-binding: display: Require two resets on mantix panel
> > > > > > 
> > > > > > All applied to drm-misc-next and pushed out.
> > > > > > And then I remembered you had commit right - sigh.
> > > > > 
> > > > > Thanks! Is there any special care needed to get that into 5.10? The
> > > > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > > > 
> > > > As the patches was applied to drm-misc-next the easiet path would
> > > > be to cherry-pick them and apply to drm-misc-fixes.
> > > > dim has cherry-pick support - try to use it rahter than doing it by
> > > > hand.
> > > 
> > > drm-misc-next-fixes while we're between freeze and merge window end:
> > > 
> > > https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch
> > 
> > Great. Thanks for the pointer, that works. Now i get:
> > 
> >   $ ../maintainer-tools/dim push --dry-run
> >   dim: 3532f0117258 ("dt-binding: display: Require two resets on mantix panel"): mandatory review missing.
> >   dim: c90f95ad6d05 ("drm/panel: mantix: Fix panel reset"): mandatory review missing.
> >   dim: 8b557f793e69 ("drm/panel: mantix: Don't dereference NULL mode"): mandatory review missing.
> >   dim: ERROR: issues in commits detected, aborting
> > 
> > and in fact there's only Signed-off-by's on it:
> > 
> >   Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
> >   Signed-off-by: Guido Günther <agx@sigxcpu.org>
> >   Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> >   Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
> > 
> > Sam, I assume your Signed-off-by's should have been Reviewed-by ?
> > O.k. to fix that up in the commit message before pushing to
> > drm-misc-next?
> Fine to add my r-b.
> 
> For patches I push I always read the patch - but seldom claim that I
> review them. It seems a bit implicit I think - but maybe this is just
> bad practice on my side.

I don't know but for fixes i seems fine for dim to complain if they show
up without a r-b.

> 
> Then I also avoid the endless discussion with myself it what I did
> warrant an a-b or r-b.

Pushed out now, thanks a lot for the help!
Cheers,
 -- Guido
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel