dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/3] drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD
@ 2021-01-21 23:33 Dmitry Baryshkov
  2021-01-21 23:33 ` [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available Dmitry Baryshkov
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2021-01-21 23:33 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
	Andrzej Hajda, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg

These three patches provide fixes for HPD handling and EDID readout for
Lontium lt9611uxc DSI-to-HDMI bridge driver.

Changes since v3:
 - Protect hdmi_connected using ocm_mutex
 - Remove !! conversion from int to boolean
 - Add missing Reviewed-by tags.

Changes since v2:
 - Declare lt9611uxc_hpd_work as static

Changes since v1:
 - Split first patch into two smaller patches
 - Add Fixes tags

Dmitry Baryshkov (3):
      drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available
      drm/bridge/lontium-lt9611uxc: fix get_edid return code
      drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available
  2021-01-21 23:33 [PATCH v4 0/3] drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD Dmitry Baryshkov
@ 2021-01-21 23:33 ` Dmitry Baryshkov
  2021-01-22  9:27   ` Andrzej Hajda
  2021-01-21 23:33 ` [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code Dmitry Baryshkov
  2021-01-21 23:33 ` [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler Dmitry Baryshkov
  2 siblings, 1 reply; 8+ messages in thread
From: Dmitry Baryshkov @ 2021-01-21 23:33 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
	Bjorn Andersson, Andrzej Hajda, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg

- Call wake_up() when EDID ready event is received to wake
  wait_event_interruptible_timeout()

- Increase waiting timeout, reading EDID can take longer than 100ms, so
  let's be on a safe side.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
index 0c98d27f84ac..a59e811f1705 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
@@ -145,8 +145,10 @@ static irqreturn_t lt9611uxc_irq_thread_handler(int irq, void *dev_id)
 
 	lt9611uxc_unlock(lt9611uxc);
 
-	if (irq_status & BIT(0))
+	if (irq_status & BIT(0)) {
 		lt9611uxc->edid_read = !!(hpd_status & BIT(0));
+		wake_up_all(&lt9611uxc->wq);
+	}
 
 	if (irq_status & BIT(1)) {
 		if (lt9611uxc->connector.dev)
@@ -465,7 +467,7 @@ static enum drm_connector_status lt9611uxc_bridge_detect(struct drm_bridge *brid
 static int lt9611uxc_wait_for_edid(struct lt9611uxc *lt9611uxc)
 {
 	return wait_event_interruptible_timeout(lt9611uxc->wq, lt9611uxc->edid_read,
-			msecs_to_jiffies(100));
+			msecs_to_jiffies(500));
 }
 
 static int lt9611uxc_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len)
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code
  2021-01-21 23:33 [PATCH v4 0/3] drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD Dmitry Baryshkov
  2021-01-21 23:33 ` [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available Dmitry Baryshkov
@ 2021-01-21 23:33 ` Dmitry Baryshkov
  2021-01-22  9:28   ` Andrzej Hajda
  2021-01-21 23:33 ` [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler Dmitry Baryshkov
  2 siblings, 1 reply; 8+ messages in thread
From: Dmitry Baryshkov @ 2021-01-21 23:33 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
	Bjorn Andersson, Andrzej Hajda, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg

Return NULL pointer from get_edid() callback rather than ERR_PTR()
pointer, as DRM code does NULL checks rather than IS_ERR(). Also while
we are at it, return NULL if getting EDID timed out.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
index a59e811f1705..b708700e182d 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
@@ -505,7 +505,10 @@ static struct edid *lt9611uxc_bridge_get_edid(struct drm_bridge *bridge,
 	ret = lt9611uxc_wait_for_edid(lt9611uxc);
 	if (ret < 0) {
 		dev_err(lt9611uxc->dev, "wait for EDID failed: %d\n", ret);
-		return ERR_PTR(ret);
+		return NULL;
+	} else if (ret == 0) {
+		dev_err(lt9611uxc->dev, "wait for EDID timeout\n");
+		return NULL;
 	}
 
 	return drm_do_get_edid(connector, lt9611uxc_get_edid_block, lt9611uxc);
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler
  2021-01-21 23:33 [PATCH v4 0/3] drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD Dmitry Baryshkov
  2021-01-21 23:33 ` [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available Dmitry Baryshkov
  2021-01-21 23:33 ` [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code Dmitry Baryshkov
@ 2021-01-21 23:33 ` Dmitry Baryshkov
  2021-01-22  9:34   ` Andrzej Hajda
  2 siblings, 1 reply; 8+ messages in thread
From: Dmitry Baryshkov @ 2021-01-21 23:33 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
	Andrzej Hajda, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg

drm hotplug handling code (drm_client_dev_hotplug()) can wait on mutex,
thus delaying further lt9611uxc IRQ events processing.  It was observed
occasionally during bootups, when drm_client_modeset_probe() was waiting
for EDID ready event, which was delayed because IRQ handler was stuck
trying to deliver hotplug event.
Move hotplug notifications from IRQ handler to separate work to be able
to process IRQ events without delays.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
---
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 46 +++++++++++++++++-----
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
index b708700e182d..fee27952ec6d 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
@@ -14,6 +14,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #include <sound/hdmi-codec.h>
 
@@ -36,6 +37,7 @@ struct lt9611uxc {
 	struct mutex ocm_lock;
 
 	struct wait_queue_head wq;
+	struct work_struct work;
 
 	struct device_node *dsi0_node;
 	struct device_node *dsi1_node;
@@ -52,6 +54,8 @@ struct lt9611uxc {
 
 	bool hpd_supported;
 	bool edid_read;
+	/* can be accessed from different threads, so protect this with ocm_lock */
+	bool hdmi_connected;
 	uint8_t fw_version;
 };
 
@@ -143,23 +147,41 @@ static irqreturn_t lt9611uxc_irq_thread_handler(int irq, void *dev_id)
 	if (irq_status)
 		regmap_write(lt9611uxc->regmap, 0xb022, 0);
 
-	lt9611uxc_unlock(lt9611uxc);
-
 	if (irq_status & BIT(0)) {
 		lt9611uxc->edid_read = !!(hpd_status & BIT(0));
 		wake_up_all(&lt9611uxc->wq);
 	}
 
 	if (irq_status & BIT(1)) {
-		if (lt9611uxc->connector.dev)
-			drm_kms_helper_hotplug_event(lt9611uxc->connector.dev);
-		else
-			drm_bridge_hpd_notify(&lt9611uxc->bridge, !!(hpd_status & BIT(1)));
+		lt9611uxc->hdmi_connected = hpd_status & BIT(1);
+		schedule_work(&lt9611uxc->work);
 	}
 
+	lt9611uxc_unlock(lt9611uxc);
+
 	return IRQ_HANDLED;
 }
 
+static void lt9611uxc_hpd_work(struct work_struct *work)
+{
+	struct lt9611uxc *lt9611uxc = container_of(work, struct lt9611uxc, work);
+	bool connected;
+
+	if (lt9611uxc->connector.dev)
+		drm_kms_helper_hotplug_event(lt9611uxc->connector.dev);
+	else {
+
+		mutex_lock(&lt9611uxc->ocm_lock);
+		connected = lt9611uxc->hdmi_connected;
+		mutex_unlock(&lt9611uxc->ocm_lock);
+
+		drm_bridge_hpd_notify(&lt9611uxc->bridge,
+				      connected ?
+				      connector_status_connected :
+				      connector_status_disconnected);
+	}
+}
+
 static void lt9611uxc_reset(struct lt9611uxc *lt9611uxc)
 {
 	gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 1);
@@ -447,18 +469,21 @@ static enum drm_connector_status lt9611uxc_bridge_detect(struct drm_bridge *brid
 	struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
 	unsigned int reg_val = 0;
 	int ret;
-	int connected = 1;
+	bool connected = true;
+
+	lt9611uxc_lock(lt9611uxc);
 
 	if (lt9611uxc->hpd_supported) {
-		lt9611uxc_lock(lt9611uxc);
 		ret = regmap_read(lt9611uxc->regmap, 0xb023, &reg_val);
-		lt9611uxc_unlock(lt9611uxc);
 
 		if (ret)
 			dev_err(lt9611uxc->dev, "failed to read hpd status: %d\n", ret);
 		else
 			connected  = reg_val & BIT(1);
 	}
+	lt9611uxc->hdmi_connected = connected;
+
+	lt9611uxc_unlock(lt9611uxc);
 
 	return connected ?  connector_status_connected :
 				connector_status_disconnected;
@@ -931,6 +956,8 @@ static int lt9611uxc_probe(struct i2c_client *client,
 	lt9611uxc->fw_version = ret;
 
 	init_waitqueue_head(&lt9611uxc->wq);
+	INIT_WORK(&lt9611uxc->work, lt9611uxc_hpd_work);
+
 	ret = devm_request_threaded_irq(dev, client->irq, NULL,
 					lt9611uxc_irq_thread_handler,
 					IRQF_ONESHOT, "lt9611uxc", lt9611uxc);
@@ -967,6 +994,7 @@ static int lt9611uxc_remove(struct i2c_client *client)
 	struct lt9611uxc *lt9611uxc = i2c_get_clientdata(client);
 
 	disable_irq(client->irq);
+	flush_scheduled_work();
 	lt9611uxc_audio_exit(lt9611uxc);
 	drm_bridge_remove(&lt9611uxc->bridge);
 
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available
  2021-01-21 23:33 ` [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available Dmitry Baryshkov
@ 2021-01-22  9:27   ` Andrzej Hajda
  0 siblings, 0 replies; 8+ messages in thread
From: Andrzej Hajda @ 2021-01-22  9:27 UTC (permalink / raw)
  To: Dmitry Baryshkov, dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Neil Armstrong, David Airlie, Jonas Karlman,
	Bjorn Andersson, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg


W dniu 22.01.2021 o 00:33, Dmitry Baryshkov pisze:
> - Call wake_up() when EDID ready event is received to wake
>    wait_event_interruptible_timeout()
>
> - Increase waiting timeout, reading EDID can take longer than 100ms, so
>    let's be on a safe side.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Regards
Andrzej
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code
  2021-01-21 23:33 ` [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code Dmitry Baryshkov
@ 2021-01-22  9:28   ` Andrzej Hajda
  0 siblings, 0 replies; 8+ messages in thread
From: Andrzej Hajda @ 2021-01-22  9:28 UTC (permalink / raw)
  To: Dmitry Baryshkov, dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Neil Armstrong, David Airlie, Jonas Karlman,
	Bjorn Andersson, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg


W dniu 22.01.2021 o 00:33, Dmitry Baryshkov pisze:
> Return NULL pointer from get_edid() callback rather than ERR_PTR()
> pointer, as DRM code does NULL checks rather than IS_ERR(). Also while
> we are at it, return NULL if getting EDID timed out.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Regards
Andrzej
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler
  2021-01-21 23:33 ` [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler Dmitry Baryshkov
@ 2021-01-22  9:34   ` Andrzej Hajda
  2021-01-28 11:24     ` Andrzej Hajda
  0 siblings, 1 reply; 8+ messages in thread
From: Andrzej Hajda @ 2021-01-22  9:34 UTC (permalink / raw)
  To: Dmitry Baryshkov, dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Neil Armstrong, David Airlie, Jonas Karlman,
	Bjorn Andersson, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg

W dniu 22.01.2021 o 00:33, Dmitry Baryshkov pisze:
> drm hotplug handling code (drm_client_dev_hotplug()) can wait on mutex,
> thus delaying further lt9611uxc IRQ events processing.  It was observed
> occasionally during bootups, when drm_client_modeset_probe() was waiting
> for EDID ready event, which was delayed because IRQ handler was stuck
> trying to deliver hotplug event.
> Move hotplug notifications from IRQ handler to separate work to be able
> to process IRQ events without delays.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")


Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>


Let's wait till Monday for other comments, then I can queue the patchset.


Regards
Andrzej
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler
  2021-01-22  9:34   ` Andrzej Hajda
@ 2021-01-28 11:24     ` Andrzej Hajda
  0 siblings, 0 replies; 8+ messages in thread
From: Andrzej Hajda @ 2021-01-28 11:24 UTC (permalink / raw)
  To: Dmitry Baryshkov, dri-devel, linux-arm-msm
  Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
	Bjorn Andersson, Vinod Koul, Laurent Pinchart,
	Manivannan Sadhasivam, Sam Ravnborg


W dniu 22.01.2021 o 10:34, Andrzej Hajda pisze:
> W dniu 22.01.2021 o 00:33, Dmitry Baryshkov pisze:
>> drm hotplug handling code (drm_client_dev_hotplug()) can wait on mutex,
>> thus delaying further lt9611uxc IRQ events processing.  It was observed
>> occasionally during bootups, when drm_client_modeset_probe() was waiting
>> for EDID ready event, which was delayed because IRQ handler was stuck
>> trying to deliver hotplug event.
>> Move hotplug notifications from IRQ handler to separate work to be able
>> to process IRQ events without delays.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>
>
> Let's wait till Monday for other comments, then I can queue the patchset.


Queued to drm-misc-fixes.

I have fixed missing parentheses in the last patch in 
lt9611uxc_hpd_work, but apparently sth went wrong and I have merged 
version without these parentheses :(, can be fixed in another future 
patchset.

Regards

Andrzej


>
>
> Regards
> Andrzej
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://protect2.fireeye.com/v1/url?k=20f4a2d0-7f6f9b96-20f5299f-0cc47a3003e8-b85b502ae8b34801&q=1&e=194b3466-3374-4717-82f7-d4cec3951dd6&u=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Fdri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-21 23:33 [PATCH v4 0/3] drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD Dmitry Baryshkov
2021-01-21 23:33 ` [PATCH v4 1/3] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available Dmitry Baryshkov
2021-01-22  9:27   ` Andrzej Hajda
2021-01-21 23:33 ` [PATCH v4 2/3] drm/bridge/lontium-lt9611uxc: fix get_edid return code Dmitry Baryshkov
2021-01-22  9:28   ` Andrzej Hajda
2021-01-21 23:33 ` [PATCH v4 3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler Dmitry Baryshkov
2021-01-22  9:34   ` Andrzej Hajda
2021-01-28 11:24     ` Andrzej Hajda

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git