driverdev-devel.linuxdriverproject.org archive mirror
 help / color / mirror / Atom feed
From: Coiby Xu <coiby.xu@gmail.com>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: devel@driverdev.osuosl.org,
	"supporter:QLOGIC QLGE 10Gb ETHERNET DRIVER"
	<GR-Linux-NIC-Dev@marvell.com>,
	Manish Chopra <manishc@marvell.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Shung-Hsi Yu <shung-hsi.yu@suse.com>,
	open list <linux-kernel@vger.kernel.org>,
	Benjamin Poirier <benjamin.poirier@gmail.com>,
	"open list:QLOGIC QLGE 10Gb ETHERNET DRIVER"
	<netdev@vger.kernel.org>
Subject: Re: [PATCH v1 1/6] staging: qlge: Initialize devlink health dump framework for the dlge driver
Date: Fri, 9 Oct 2020 08:12:45 +0800	[thread overview]
Message-ID: <20201009001245.dhtyvhbkdpmaadng@Rk> (raw)
In-Reply-To: <20201008133142.GB1042@kadam>

On Thu, Oct 08, 2020 at 04:31:42PM +0300, Dan Carpenter wrote:
>On Thu, Oct 08, 2020 at 07:58:03PM +0800, Coiby Xu wrote:
>> Initialize devlink health dump framework for the dlge driver so the
>> coredump could be done via devlink.
>>
>> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
>> ---
>>  drivers/staging/qlge/Kconfig        |  1 +
>>  drivers/staging/qlge/Makefile       |  2 +-
>>  drivers/staging/qlge/qlge.h         |  9 +++++++
>>  drivers/staging/qlge/qlge_devlink.c | 38 +++++++++++++++++++++++++++++
>>  drivers/staging/qlge/qlge_devlink.h |  8 ++++++
>>  drivers/staging/qlge/qlge_main.c    | 28 +++++++++++++++++++++
>>  6 files changed, 85 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/staging/qlge/qlge_devlink.c
>>  create mode 100644 drivers/staging/qlge/qlge_devlink.h
>>
>> diff --git a/drivers/staging/qlge/Kconfig b/drivers/staging/qlge/Kconfig
>> index a3cb25a3ab80..6d831ed67965 100644
>> --- a/drivers/staging/qlge/Kconfig
>> +++ b/drivers/staging/qlge/Kconfig
>> @@ -3,6 +3,7 @@
>>  config QLGE
>>  	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
>>  	depends on ETHERNET && PCI
>> +	select NET_DEVLINK
>>  	help
>>  	This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
>>
>> diff --git a/drivers/staging/qlge/Makefile b/drivers/staging/qlge/Makefile
>> index 1dc2568e820c..07c1898a512e 100644
>> --- a/drivers/staging/qlge/Makefile
>> +++ b/drivers/staging/qlge/Makefile
>> @@ -5,4 +5,4 @@
>>
>>  obj-$(CONFIG_QLGE) += qlge.o
>>
>> -qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o
>> +qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o qlge_devlink.o
>> diff --git a/drivers/staging/qlge/qlge.h b/drivers/staging/qlge/qlge.h
>> index b295990e361b..290e754450c5 100644
>> --- a/drivers/staging/qlge/qlge.h
>> +++ b/drivers/staging/qlge/qlge.h
>> @@ -2060,6 +2060,14 @@ struct nic_operations {
>>  	int (*port_initialize)(struct ql_adapter *qdev);
>>  };
>>
>> +
>> +
>
>Having multiple blank lines in a row leads to a static checker warning.
>Please run `checkpatch.pl --strict` over your patches.
>
>> +struct qlge_devlink {
>> +        struct ql_adapter *qdev;
>> +        struct net_device *ndev;
>> +        struct devlink_health_reporter *reporter;
>> +};
>> +
>>  /*
>>   * The main Adapter structure definition.
>>   * This structure has all fields relevant to the hardware.
>> @@ -2077,6 +2085,7 @@ struct ql_adapter {
>>  	struct pci_dev *pdev;
>>  	struct net_device *ndev;	/* Parent NET device */
>>
>> +	struct qlge_devlink *ql_devlink;
>>  	/* Hardware information */
>>  	u32 chip_rev_id;
>>  	u32 fw_rev_id;
>> diff --git a/drivers/staging/qlge/qlge_devlink.c b/drivers/staging/qlge/qlge_devlink.c
>> new file mode 100644
>> index 000000000000..aa45e7e368c0
>> --- /dev/null
>> +++ b/drivers/staging/qlge/qlge_devlink.c
>> @@ -0,0 +1,38 @@
>> +#include "qlge.h"
>> +#include "qlge_devlink.h"
>> +
>> +static int
>> +qlge_reporter_coredump(struct devlink_health_reporter *reporter,
>> +			struct devlink_fmsg *fmsg, void *priv_ctx,
>> +			struct netlink_ext_ack *extack)
>> +{
>> +	return 0;
>> +}
>> +
>> +static const struct devlink_health_reporter_ops qlge_reporter_ops = {
>> +		.name = "dummy",
>> +		.dump = qlge_reporter_coredump,
>
>Indented too far.
>
>> +};
>> +
>> +int qlge_health_create_reporters(struct qlge_devlink *priv)
>> +{
>> +	int err;
>> +
>
>No blanks in the middle of declarations.
>
>> +	struct devlink_health_reporter *reporter;
>> +	struct devlink *devlink;
>
>Generally this driver declares variables in "Reverse Christmas Tree"
>order.  The names are orderred by the length of the line from longest
>to shortest.
>
>	type long_name;
>	type medium;
>	type short;
>
>> +
>> +	devlink = priv_to_devlink(priv);
>> +	reporter =
>> +		devlink_health_reporter_create(devlink, &qlge_reporter_ops,
>> +					       0,
>> +					       priv);
>
>Break this up like so:
>
>	reporter = devlink_health_reporter_create(devlink, &qlge_reporter_ops,
>						  0, priv);
>
>
>> +	if (IS_ERR(reporter)) {
>> +		netdev_warn(priv->ndev,
>> +			    "Failed to create reporter, err = %ld\n",
>> +			    PTR_ERR(reporter));
>> +		return PTR_ERR(reporter);
>
>No point in returning an error if the caller doesn't check?
>
>> +	}
>> +	priv->reporter = reporter;
>> +
>> +	return err;
>
>err is uninitialized.  "return 0;"
>
>> +}
>> diff --git a/drivers/staging/qlge/qlge_devlink.h b/drivers/staging/qlge/qlge_devlink.h
>> new file mode 100644
>> index 000000000000..c91f7a29e805
>> --- /dev/null
>> +++ b/drivers/staging/qlge/qlge_devlink.h
>> @@ -0,0 +1,8 @@
>> +#ifndef QLGE_DEVLINK_H
>> +#define QLGE_DEVLINK_H
>> +
>> +#include <net/devlink.h>
>> +
>> +int qlge_health_create_reporters(struct qlge_devlink *priv);
>> +
>> +#endif /* QLGE_DEVLINK_H */
>> diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
>> index 27da386f9d87..135225530e51 100644
>> --- a/drivers/staging/qlge/qlge_main.c
>> +++ b/drivers/staging/qlge/qlge_main.c
>> @@ -42,6 +42,7 @@
>>  #include <net/ip6_checksum.h>
>>
>>  #include "qlge.h"
>> +#include "qlge_devlink.h"
>>
>>  char qlge_driver_name[] = DRV_NAME;
>>  const char qlge_driver_version[] = DRV_VERSION;
>> @@ -4549,6 +4550,8 @@ static void ql_timer(struct timer_list *t)
>>  	mod_timer(&qdev->timer, jiffies + (5 * HZ));
>>  }
>>
>> +static const struct devlink_ops qlge_devlink_ops;
>> +
>>  static int qlge_probe(struct pci_dev *pdev,
>>  		      const struct pci_device_id *pci_entry)
>>  {
>> @@ -4556,6 +4559,13 @@ static int qlge_probe(struct pci_dev *pdev,
>>  	struct ql_adapter *qdev = NULL;
>>  	static int cards_found;
>>  	int err = 0;
>> +	struct devlink *devlink;
>> +	struct qlge_devlink *ql_devlink;
>> +
>> +	devlink = devlink_alloc(&qlge_devlink_ops, sizeof(struct qlge_devlink));
>> +	if (!devlink)
>> +		return -ENOMEM;
>> +	ql_devlink = devlink_priv(devlink);
>>
>>  	ndev = alloc_etherdev_mq(sizeof(struct ql_adapter),
>>  				 min(MAX_CPUS,
>> @@ -4614,6 +4624,16 @@ static int qlge_probe(struct pci_dev *pdev,
>>  		free_netdev(ndev);
>>  		return err;
>>  	}
>> +
>> +	err = devlink_register(devlink, &pdev->dev);
>> +	if (err) {
>> +		goto devlink_free;
>> +	}
>
>Checkpatch warning.
>

Thank you for the reminding!

>regards,
>dan carpenter
>

--
Best regards,
Coiby
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  reply	other threads:[~2020-10-09  0:12 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-08 11:58 [PATCH v1 0/6] staging: qlge: Re-writing the debugging features Coiby Xu
2020-10-08 11:58 ` [PATCH v1 1/6] staging: qlge: Initialize devlink health dump framework for the dlge driver Coiby Xu
2020-10-08 12:22   ` Willem de Bruijn
2020-10-08 12:54     ` Coiby Xu
2020-10-12  8:08     ` Coiby Xu
2020-10-08 13:31   ` Dan Carpenter
2020-10-09  0:12     ` Coiby Xu [this message]
2020-10-08 17:45   ` kernel test robot
2020-10-10  7:35   ` Benjamin Poirier
2020-10-10 10:24     ` Coiby Xu
2020-10-10 13:48       ` Benjamin Poirier
2020-10-12 11:24         ` Coiby Xu
2020-10-13  0:37           ` Benjamin Poirier
2020-10-15  3:37             ` Coiby Xu
2020-10-15 11:06               ` Benjamin Poirier
2020-10-16 23:08                 ` Coiby Xu
2020-10-08 11:58 ` [PATCH v1 2/6] staging: qlge: coredump via devlink health reporter Coiby Xu
2020-10-08 13:39   ` Dan Carpenter
2020-10-09  0:14     ` Coiby Xu
2020-10-10  7:48   ` Benjamin Poirier
2020-10-10 10:02     ` Coiby Xu
2020-10-10 13:22       ` Benjamin Poirier
2020-10-12 11:51         ` Coiby Xu
2020-10-13  1:18           ` Benjamin Poirier
2020-10-08 11:58 ` [PATCH v1 3/6] staging: qlge: support force_coredump option for devlink health dump Coiby Xu
2020-10-08 11:58 ` [PATCH v1 4/6] staging: qlge: remove mpi_core_to_log which sends coredump to the kernel ring buffer Coiby Xu
2020-10-08 11:58 ` [PATCH v1 5/6] staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land Coiby Xu
2020-10-10  8:01   ` Benjamin Poirier
2020-10-10 10:00     ` Coiby Xu
2020-10-10 13:40       ` Benjamin Poirier
2020-10-12 11:29         ` Coiby Xu
2020-10-08 11:58 ` [PATCH v1 6/6] staging: qlge: add documentation for debugging qlge Coiby Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201009001245.dhtyvhbkdpmaadng@Rk \
    --to=coiby.xu@gmail.com \
    --cc=GR-Linux-NIC-Dev@marvell.com \
    --cc=benjamin.poirier@gmail.com \
    --cc=dan.carpenter@oracle.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manishc@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=shung-hsi.yu@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).