* [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel
@ 2021-08-05 7:30 Xin Ji
2021-08-05 19:05 ` Robert Foss
2021-08-05 19:33 ` Sam Ravnborg
0 siblings, 2 replies; 5+ messages in thread
From: Xin Ji @ 2021-08-05 7:30 UTC (permalink / raw)
To: Robert Foss, Nicolas Boichat, Andrzej Hajda
Cc: devel, Jonas Karlman, David Airlie, Bernie Liang, Qilin Wen,
Neil Armstrong, linux-kernel, dri-devel, Vasily Khoruzhick,
Boris Brezillon, Torsten Duwe, Laurent Pinchart, Daniel Vetter,
Hsin-Yi Wang, Sam Ravnborg, Dan Carpenter, Marek Szyprowski
IVO panel require less input video clock variation than video clock
variation in DP CTS spec.
This patch decreases the K value of ANX7625 which will shrink eDP Tx
video clock variation to meet IVO panel's requirement.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 17 ++++++++++++++---
drivers/gpu/drm/bridge/analogix/anx7625.h | 4 +++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index a3d82377066b..ceed1c7f3f28 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -384,6 +384,18 @@ static int anx7625_odfc_config(struct anx7625_data *ctx,
return ret;
}
+static int anx7625_set_k_value(struct anx7625_data *ctx)
+{
+ struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data;
+
+ if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1)
+ return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+ MIPI_DIGITAL_ADJ_1, 0x3B);
+
+ return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+ MIPI_DIGITAL_ADJ_1, 0x3D);
+}
+
static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
{
struct device *dev = &ctx->client->dev;
@@ -470,9 +482,8 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0,
(n & 0xff));
- /* Diff */
- ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
- MIPI_DIGITAL_ADJ_1, 0x3D);
+ /* Diff and K value */
+ anx7625_set_k_value(ctx);
ret |= anx7625_odfc_config(ctx, post_divider - 1);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 034c3840028f..6dcf64c703f9 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -210,7 +210,9 @@
#define MIPI_VIDEO_STABLE_CNT 0x0A
#define MIPI_LANE_CTRL_10 0x0F
-#define MIPI_DIGITAL_ADJ_1 0x1B
+#define MIPI_DIGITAL_ADJ_1 0x1B
+#define IVO_MID0 0x26
+#define IVO_MID1 0xCF
#define MIPI_PLL_M_NUM_23_16 0x1E
#define MIPI_PLL_M_NUM_15_8 0x1F
--
2.25.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel
2021-08-05 7:30 [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel Xin Ji
@ 2021-08-05 19:05 ` Robert Foss
2021-08-06 8:58 ` Xin Ji
2021-08-05 19:33 ` Sam Ravnborg
1 sibling, 1 reply; 5+ messages in thread
From: Robert Foss @ 2021-08-05 19:05 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jonas Karlman, David Airlie,
Bernie Liang, Qilin Wen, Neil Armstrong, linux-kernel, dri-devel,
Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon, Torsten Duwe,
Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang, Sam Ravnborg,
Dan Carpenter, Marek Szyprowski
Hey Xin,
Thanks for submitting this.
On Thu, 5 Aug 2021 at 09:31, Xin Ji <xji@analogixsemi.com> wrote:
>
> IVO panel require less input video clock variation than video clock
> variation in DP CTS spec.
>
> This patch decreases the K value of ANX7625 which will shrink eDP Tx
> video clock variation to meet IVO panel's requirement.
>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 17 ++++++++++++++---
> drivers/gpu/drm/bridge/analogix/anx7625.h | 4 +++-
> 2 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index a3d82377066b..ceed1c7f3f28 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -384,6 +384,18 @@ static int anx7625_odfc_config(struct anx7625_data *ctx,
> return ret;
> }
>
> +static int anx7625_set_k_value(struct anx7625_data *ctx)
Pardon my ignorance, but I don't know what a K-value is. Could you add
a comment detailing
what the K-value does?
> +{
> + struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data;
> +
> + if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1)
> + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_ADJ_1, 0x3B);
> +
> + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_ADJ_1, 0x3D);
> +}
> +
> static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> {
> struct device *dev = &ctx->client->dev;
> @@ -470,9 +482,8 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
> ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0,
> (n & 0xff));
> - /* Diff */
> - ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> - MIPI_DIGITAL_ADJ_1, 0x3D);
> + /* Diff and K value */
With a proper comment above, this comment is no longer needed.
> + anx7625_set_k_value(ctx);
>
> ret |= anx7625_odfc_config(ctx, post_divider - 1);
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 034c3840028f..6dcf64c703f9 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -210,7 +210,9 @@
> #define MIPI_VIDEO_STABLE_CNT 0x0A
>
> #define MIPI_LANE_CTRL_10 0x0F
> -#define MIPI_DIGITAL_ADJ_1 0x1B
> +#define MIPI_DIGITAL_ADJ_1 0x1B
> +#define IVO_MID0 0x26
> +#define IVO_MID1 0xCF
>
> #define MIPI_PLL_M_NUM_23_16 0x1E
> #define MIPI_PLL_M_NUM_15_8 0x1F
> --
> 2.25.1
>
LGTM with the above fix.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel
2021-08-05 7:30 [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel Xin Ji
2021-08-05 19:05 ` Robert Foss
@ 2021-08-05 19:33 ` Sam Ravnborg
2021-08-06 9:00 ` Xin Ji
1 sibling, 1 reply; 5+ messages in thread
From: Sam Ravnborg @ 2021-08-05 19:33 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jonas Karlman, David Airlie, dri-devel,
Neil Armstrong, linux-kernel, Robert Foss, Vasily Khoruzhick,
Andrzej Hajda, Boris Brezillon, Torsten Duwe, Laurent Pinchart,
Daniel Vetter, Hsin-Yi Wang, Bernie Liang, Qilin Wen,
Dan Carpenter, Marek Szyprowski
On Thu, Aug 05, 2021 at 03:30:55PM +0800, Xin Ji wrote:
> IVO panel require less input video clock variation than video clock
> variation in DP CTS spec.
>
> This patch decreases the K value of ANX7625 which will shrink eDP Tx
> video clock variation to meet IVO panel's requirement.
>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
Looks good, I assume someone else (Robert) picks this.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Sam
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel
2021-08-05 19:05 ` Robert Foss
@ 2021-08-06 8:58 ` Xin Ji
0 siblings, 0 replies; 5+ messages in thread
From: Xin Ji @ 2021-08-06 8:58 UTC (permalink / raw)
To: Robert Foss
Cc: devel, Nicolas Boichat, Jonas Karlman, David Airlie,
Bernie Liang, Qilin Wen, Neil Armstrong, linux-kernel, dri-devel,
Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon, Torsten Duwe,
Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang, Sam Ravnborg,
Dan Carpenter, Marek Szyprowski
On Thu, Aug 05, 2021 at 09:05:29PM +0200, Robert Foss wrote:
> Hey Xin,
>
> Thanks for submitting this.
>
> On Thu, 5 Aug 2021 at 09:31, Xin Ji <xji@analogixsemi.com> wrote:
> >
> > IVO panel require less input video clock variation than video clock
> > variation in DP CTS spec.
> >
> > This patch decreases the K value of ANX7625 which will shrink eDP Tx
> > video clock variation to meet IVO panel's requirement.
> >
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > ---
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 17 ++++++++++++++---
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 4 +++-
> > 2 files changed, 17 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index a3d82377066b..ceed1c7f3f28 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -384,6 +384,18 @@ static int anx7625_odfc_config(struct anx7625_data *ctx,
> > return ret;
> > }
> >
> > +static int anx7625_set_k_value(struct anx7625_data *ctx)
>
> Pardon my ignorance, but I don't know what a K-value is. Could you add
> a comment detailing
> what the K-value does?
Hi Robert Foss, OK, I'll add more comment.
Thanks,
Xin
>
> > +{
> > + struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data;
> > +
> > + if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1)
> > + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_ADJ_1, 0x3B);
> > +
> > + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_ADJ_1, 0x3D);
> > +}
> > +
> > static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> > {
> > struct device *dev = &ctx->client->dev;
> > @@ -470,9 +482,8 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> > MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
> > ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0,
> > (n & 0xff));
> > - /* Diff */
> > - ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > - MIPI_DIGITAL_ADJ_1, 0x3D);
> > + /* Diff and K value */
>
> With a proper comment above, this comment is no longer needed.
OK
>
> > + anx7625_set_k_value(ctx);
> >
> > ret |= anx7625_odfc_config(ctx, post_divider - 1);
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 034c3840028f..6dcf64c703f9 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -210,7 +210,9 @@
> > #define MIPI_VIDEO_STABLE_CNT 0x0A
> >
> > #define MIPI_LANE_CTRL_10 0x0F
> > -#define MIPI_DIGITAL_ADJ_1 0x1B
> > +#define MIPI_DIGITAL_ADJ_1 0x1B
> > +#define IVO_MID0 0x26
> > +#define IVO_MID1 0xCF
> >
> > #define MIPI_PLL_M_NUM_23_16 0x1E
> > #define MIPI_PLL_M_NUM_15_8 0x1F
> > --
> > 2.25.1
> >
>
> LGTM with the above fix.
>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel
2021-08-05 19:33 ` Sam Ravnborg
@ 2021-08-06 9:00 ` Xin Ji
0 siblings, 0 replies; 5+ messages in thread
From: Xin Ji @ 2021-08-06 9:00 UTC (permalink / raw)
To: Sam Ravnborg
Cc: devel, Nicolas Boichat, dri-devel, Jonas Karlman, David Airlie,
Qilin Wen, Neil Armstrong, linux-kernel, Robert Foss,
Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon, Torsten Duwe,
Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang, Bernie Liang,
Dan Carpenter, Marek Szyprowski
On Thu, Aug 05, 2021 at 09:33:20PM +0200, Sam Ravnborg wrote:
> On Thu, Aug 05, 2021 at 03:30:55PM +0800, Xin Ji wrote:
> > IVO panel require less input video clock variation than video clock
> > variation in DP CTS spec.
> >
> > This patch decreases the K value of ANX7625 which will shrink eDP Tx
> > video clock variation to meet IVO panel's requirement.
> >
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
>
> Looks good, I assume someone else (Robert) picks this.
>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> Sam
Hi Sam Ravnborg, OK, thanks,
Xin
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-08-06 9:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-05 7:30 [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel Xin Ji
2021-08-05 19:05 ` Robert Foss
2021-08-06 8:58 ` Xin Ji
2021-08-05 19:33 ` Sam Ravnborg
2021-08-06 9:00 ` Xin Ji
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).