DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: shubhrajyoti.datta@gmail.com
To: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	devel@driverdev.osuosl.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	sboyd@kernel.org, gregkh@linuxfoundation.org,
	mturquette@baylibre.com,
	Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>,
	robh+dt@kernel.org, soren.brinkmann@xilinx.com
Subject: [PATCH v3 02/10] clk: clock-wizard: Move the clockwizard to clk
Date: Thu, 28 Nov 2019 12:06:09 +0530
Message-ID: <610b14b71d4c3c4c28cbedc340f6a92f15e25241.1574922435.git.shubhrajyoti.datta@xilinx.com> (raw)
In-Reply-To: <cover.1574922435.git.shubhrajyoti.datta@xilinx.com>

From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

Move the clocking wizard driver from staging to clk.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
 drivers/clk/Kconfig                 |   6 +
 drivers/clk/Makefile                |   1 +
 drivers/clk/clk-xlnx-clock-wizard.c | 335 ++++++++++++++++++++++++++++++++++++
 3 files changed, 342 insertions(+)
 create mode 100644 drivers/clk/clk-xlnx-clock-wizard.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c44247d..ff7d0f6 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -305,6 +305,12 @@ config COMMON_CLK_FIXED_MMIO
 	help
 	  Support for Memory Mapped IO Fixed clocks
 
+config COMMON_CLK_XLNX_CLKWZRD
+	tristate "Xilinx Clocking Wizard"
+	depends on COMMON_CLK && OF
+	help
+	  Support for the Xilinx Clocking Wizard IP core clock generator.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/bcm/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0138fb1..bce022f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
 obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clk-xlnx-clock-wizard.o
 
 # please keep this section sorted lexicographically by directory path name
 obj-y					+= actions/
diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
new file mode 100644
index 0000000..15b7a82
--- /dev/null
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx 'Clocking Wizard' driver
+ *
+ *  Copyright (C) 2013 - 2014 Xilinx
+ *
+ *  Sören Brinkmann <soren.brinkmann@xilinx.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define WZRD_NUM_OUTPUTS	7
+#define WZRD_ACLK_MAX_FREQ	250000000UL
+
+#define WZRD_CLK_CFG_REG(n)	(0x200 + 4 * (n))
+
+#define WZRD_CLKOUT0_FRAC_EN	BIT(18)
+#define WZRD_CLKFBOUT_FRAC_EN	BIT(26)
+
+#define WZRD_CLKFBOUT_MULT_SHIFT	8
+#define WZRD_CLKFBOUT_MULT_MASK		(0xff << WZRD_CLKFBOUT_MULT_SHIFT)
+#define WZRD_DIVCLK_DIVIDE_SHIFT	0
+#define WZRD_DIVCLK_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_DIVIDE_SHIFT	0
+#define WZRD_CLKOUT_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+
+enum clk_wzrd_int_clks {
+	wzrd_clk_mul,
+	wzrd_clk_mul_div,
+	wzrd_clk_int_max
+};
+
+/**
+ * struct clk_wzrd:
+ * @clk_data:		Clock data
+ * @nb:			Notifier block
+ * @base:		Memory base
+ * @clk_in1:		Handle to input clock 'clk_in1'
+ * @axi_clk:		Handle to input clock 's_axi_aclk'
+ * @clks_internal:	Internal clocks
+ * @clkout:		Output clocks
+ * @speed_grade:	Speed grade of the device
+ * @suspended:		Flag indicating power state of the device
+ */
+struct clk_wzrd {
+	struct clk_onecell_data clk_data;
+	struct notifier_block nb;
+	void __iomem *base;
+	struct clk *clk_in1;
+	struct clk *axi_clk;
+	struct clk *clks_internal[wzrd_clk_int_max];
+	struct clk *clkout[WZRD_NUM_OUTPUTS];
+	unsigned int speed_grade;
+	bool suspended;
+};
+
+#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb)
+
+/* maximum frequencies for input/output clocks per speed grade */
+static const unsigned long clk_wzrd_max_freq[] = {
+	800000000UL,
+	933000000UL,
+	1066000000UL
+};
+
+static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event,
+				 void *data)
+{
+	unsigned long max;
+	struct clk_notifier_data *ndata = data;
+	struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb);
+
+	if (clk_wzrd->suspended)
+		return NOTIFY_OK;
+
+	if (ndata->clk == clk_wzrd->clk_in1)
+		max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1];
+	else if (ndata->clk == clk_wzrd->axi_clk)
+		max = WZRD_ACLK_MAX_FREQ;
+	else
+		return NOTIFY_DONE;	/* should never happen */
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		if (ndata->new_rate > max)
+			return NOTIFY_BAD;
+		return NOTIFY_OK;
+	case POST_RATE_CHANGE:
+	case ABORT_RATE_CHANGE:
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static int __maybe_unused clk_wzrd_suspend(struct device *dev)
+{
+	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+	clk_wzrd->suspended = true;
+
+	return 0;
+}
+
+static int __maybe_unused clk_wzrd_resume(struct device *dev)
+{
+	int ret;
+	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(clk_wzrd->axi_clk);
+	if (ret) {
+		dev_err(dev, "unable to enable s_axi_aclk\n");
+		return ret;
+	}
+
+	clk_wzrd->suspended = false;
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
+			 clk_wzrd_resume);
+
+static int clk_wzrd_probe(struct platform_device *pdev)
+{
+	int i, ret;
+	u32 reg;
+	unsigned long rate;
+	const char *clk_name;
+	struct clk_wzrd *clk_wzrd;
+	struct resource *mem;
+	struct device_node *np = pdev->dev.of_node;
+
+	clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
+	if (!clk_wzrd)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, clk_wzrd);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	clk_wzrd->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(clk_wzrd->base))
+		return PTR_ERR(clk_wzrd->base);
+
+	ret = of_property_read_u32(np, "speed-grade", &clk_wzrd->speed_grade);
+	if (!ret) {
+		if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
+			dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
+				 clk_wzrd->speed_grade);
+			clk_wzrd->speed_grade = 0;
+		}
+	}
+
+	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
+	if (IS_ERR(clk_wzrd->clk_in1)) {
+		if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER))
+			dev_err(&pdev->dev, "clk_in1 not found\n");
+		return PTR_ERR(clk_wzrd->clk_in1);
+	}
+
+	clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+	if (IS_ERR(clk_wzrd->axi_clk)) {
+		if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER))
+			dev_err(&pdev->dev, "s_axi_aclk not found\n");
+		return PTR_ERR(clk_wzrd->axi_clk);
+	}
+	ret = clk_prepare_enable(clk_wzrd->axi_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
+		return ret;
+	}
+	rate = clk_get_rate(clk_wzrd->axi_clk);
+	if (rate > WZRD_ACLK_MAX_FREQ) {
+		dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n",
+			rate);
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	/* we don't support fractional div/mul yet */
+	reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+		    WZRD_CLKFBOUT_FRAC_EN;
+	reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) &
+		     WZRD_CLKOUT0_FRAC_EN;
+	if (reg)
+		dev_warn(&pdev->dev, "fractional div/mul not supported\n");
+
+	/* register multiplier */
+	reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+		     WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT;
+	clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
+	if (!clk_name) {
+		ret = -ENOMEM;
+		goto err_disable_clk;
+	}
+	clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
+			(&pdev->dev, clk_name,
+			 __clk_get_name(clk_wzrd->clk_in1),
+			 0, reg, 1);
+	kfree(clk_name);
+	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
+		dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
+		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
+		goto err_disable_clk;
+	}
+
+	/* register div */
+	reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+			WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT;
+	clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
+	if (!clk_name) {
+		ret = -ENOMEM;
+		goto err_rm_int_clk;
+	}
+
+	clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_fixed_factor
+			(&pdev->dev, clk_name,
+			 __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]),
+			 0, 1, reg);
+	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) {
+		dev_err(&pdev->dev, "unable to register divider clock\n");
+		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]);
+		goto err_rm_int_clk;
+	}
+
+	/* register div per output */
+	for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) {
+		const char *clkout_name;
+
+		if (of_property_read_string_index(np, "clock-output-names", i,
+						  &clkout_name)) {
+			dev_err(&pdev->dev,
+				"clock output name not specified\n");
+			ret = -EINVAL;
+			goto err_rm_int_clks;
+		}
+		reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2) + i * 12);
+		reg &= WZRD_CLKOUT_DIVIDE_MASK;
+		reg >>= WZRD_CLKOUT_DIVIDE_SHIFT;
+		clk_wzrd->clkout[i] = clk_register_fixed_factor
+			(&pdev->dev, clkout_name, clk_name, 0, 1, reg);
+		if (IS_ERR(clk_wzrd->clkout[i])) {
+			int j;
+
+			for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++)
+				clk_unregister(clk_wzrd->clkout[j]);
+			dev_err(&pdev->dev,
+				"unable to register divider clock\n");
+			ret = PTR_ERR(clk_wzrd->clkout[i]);
+			goto err_rm_int_clks;
+		}
+	}
+
+	kfree(clk_name);
+
+	clk_wzrd->clk_data.clks = clk_wzrd->clkout;
+	clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data);
+
+	if (clk_wzrd->speed_grade) {
+		clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
+
+		ret = clk_notifier_register(clk_wzrd->clk_in1,
+					    &clk_wzrd->nb);
+		if (ret)
+			dev_warn(&pdev->dev,
+				 "unable to register clock notifier\n");
+
+		ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb);
+		if (ret)
+			dev_warn(&pdev->dev,
+				 "unable to register clock notifier\n");
+	}
+
+	return 0;
+
+err_rm_int_clks:
+	clk_unregister(clk_wzrd->clks_internal[1]);
+err_rm_int_clk:
+	kfree(clk_name);
+	clk_unregister(clk_wzrd->clks_internal[0]);
+err_disable_clk:
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+
+	return ret;
+}
+
+static int clk_wzrd_remove(struct platform_device *pdev)
+{
+	int i;
+	struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < WZRD_NUM_OUTPUTS; i++)
+		clk_unregister(clk_wzrd->clkout[i]);
+	for (i = 0; i < wzrd_clk_int_max; i++)
+		clk_unregister(clk_wzrd->clks_internal[i]);
+
+	if (clk_wzrd->speed_grade) {
+		clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb);
+		clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb);
+	}
+
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+
+	return 0;
+}
+
+static const struct of_device_id clk_wzrd_ids[] = {
+	{ .compatible = "xlnx,clocking-wizard" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, clk_wzrd_ids);
+
+static struct platform_driver clk_wzrd_driver = {
+	.driver = {
+		.name = "clk-wizard",
+		.of_match_table = clk_wzrd_ids,
+		.pm = &clk_wzrd_dev_pm_ops,
+	},
+	.probe = clk_wzrd_probe,
+	.remove = clk_wzrd_remove,
+};
+module_platform_driver(clk_wzrd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
+MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core");
-- 
2.1.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28  6:36 [PATCH v3 00/10] clk: clk-wizard: clock-wizard: Driver updates shubhrajyoti.datta
2019-11-28  6:36 ` [PATCH v3 01/10] dt-bindings: add documentation of xilinx clocking wizard shubhrajyoti.datta
2019-12-13 19:52   ` Rob Herring
2019-11-28  6:36 ` shubhrajyoti.datta [this message]
2019-12-13 19:49   ` [PATCH v3 02/10] clk: clock-wizard: Move the clockwizard to clk Rob Herring
2019-11-28  6:36 ` [PATCH v3 03/10] clk: clock-wizard: Fix kernel-doc warning shubhrajyoti.datta
2020-01-05 19:48   ` Stephen Boyd
2019-11-28  6:36 ` [PATCH v3 04/10] clk: clock-wizard: Add support for dynamic reconfiguration shubhrajyoti.datta
2020-01-05 19:54   ` Stephen Boyd
2019-11-28  6:36 ` [PATCH v3 05/10] clk: clock-wizard: Add support for fractional support shubhrajyoti.datta
2019-11-28  6:36 ` [PATCH v3 06/10] clk: clock-wizard: Remove the hardcoding of the clock outputs shubhrajyoti.datta
2020-01-05 19:56   ` Stephen Boyd
2019-11-28  6:36 ` [PATCH v3 07/10] clk: clock-wizard: Update the fixed factor divisors shubhrajyoti.datta
2020-01-05 20:00   ` Stephen Boyd
2020-01-06  4:17     ` Shubhrajyoti Datta
2020-01-06  6:10       ` Stephen Boyd
2019-11-28  6:36 ` [PATCH v3 08/10] clk: clock-wizard: Make the output names unique shubhrajyoti.datta
2019-11-28  7:45   ` Dan Carpenter
2019-11-29 12:07     ` Shubhrajyoti Datta
2019-11-29 19:02       ` Dan Carpenter
2019-11-28  6:36 ` [PATCH v3 09/10] staging: clocking-wizard: Delete the driver from the staging shubhrajyoti.datta
2020-01-05 19:45   ` Stephen Boyd
2019-11-28  6:36 ` [PATCH v3 10/10] clk: clock-wizard: Fix the compilation failure shubhrajyoti.datta
2020-01-05 19:46   ` Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=610b14b71d4c3c4c28cbedc340f6a92f15e25241.1574922435.git.shubhrajyoti.datta@xilinx.com \
    --to=shubhrajyoti.datta@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=shubhrajyoti.datta@xilinx.com \
    --cc=soren.brinkmann@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git