* [PATCH] staging/wilc1000: let wilc_mac_xmit() to NETDEV_TX_OK
@ 2020-06-28 18:32 Luc Van Oostenryck
2020-06-29 7:58 ` Nicolas.Ferre
0 siblings, 1 reply; 3+ messages in thread
From: Luc Van Oostenryck @ 2020-06-28 18:32 UTC (permalink / raw)
To: Adham Abozaeid, Ajay Singh, Greg Kroah-Hartman
Cc: devel, linux-wireless, linux-kernel, Luc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type defining 'NETDEV_TX_OK' but this
driver returns '0' instead of 'NETDEV_TX_OK'.
Fix this by returning ''NETDEV_TX_OK' instead of 0.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
---
drivers/staging/wilc1000/netdev.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/wilc1000/netdev.c b/drivers/staging/wilc1000/netdev.c
index fda0ab97b02c..be3ae5486f44 100644
--- a/drivers/staging/wilc1000/netdev.c
+++ b/drivers/staging/wilc1000/netdev.c
@@ -678,14 +678,14 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
if (skb->dev != ndev) {
netdev_err(ndev, "Packet not destined to this device\n");
- return 0;
+ return NETDEV_TX_OK;
}
tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
if (!tx_data) {
dev_kfree_skb(skb);
netif_wake_queue(ndev);
- return 0;
+ return NETDEV_TX_OK;
}
tx_data->buff = skb->data;
@@ -710,7 +710,7 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
srcu_read_unlock(&wilc->srcu, srcu_idx);
}
- return 0;
+ return NETDEV_TX_OK;
}
static int wilc_mac_close(struct net_device *ndev)
--
2.27.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] staging/wilc1000: let wilc_mac_xmit() to NETDEV_TX_OK
2020-06-28 18:32 [PATCH] staging/wilc1000: let wilc_mac_xmit() to NETDEV_TX_OK Luc Van Oostenryck
@ 2020-06-29 7:58 ` Nicolas.Ferre
2020-07-02 6:48 ` Kalle Valo
0 siblings, 1 reply; 3+ messages in thread
From: Nicolas.Ferre @ 2020-06-29 7:58 UTC (permalink / raw)
To: luc.vanoostenryck, adham.abozaeid, Ajay.Kathat, gregkh, kvalo
Cc: devel, linux-wireless, linux-kernel
Luc,
Thanks for your patch...
On 28/06/2020 at 20:32, Luc Van Oostenryck wrote:
> The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
> which is a typedef for an enum type defining 'NETDEV_TX_OK' but this
> driver returns '0' instead of 'NETDEV_TX_OK'.
>
> Fix this by returning ''NETDEV_TX_OK' instead of 0.
>
> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
> ---
> drivers/staging/wilc1000/netdev.c | 6 +++---
... would it be possible that you re-spin it so that it applies to the
new location of this driver:
drivers/net/wireless/microchip/wilc1000/netdev.c
You can rebase your patch on the wireless-driver-next tree with
wilc1000-move-out-of-staging branch:
tree:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
branch: wilc1000-move-out-of-staging
(Then you can also review the subject line of your patch, BTW)
Thanks for your help. Best regards,
Nicolas
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/netdev.c b/drivers/staging/wilc1000/netdev.c
> index fda0ab97b02c..be3ae5486f44 100644
> --- a/drivers/staging/wilc1000/netdev.c
> +++ b/drivers/staging/wilc1000/netdev.c
> @@ -678,14 +678,14 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
>
> if (skb->dev != ndev) {
> netdev_err(ndev, "Packet not destined to this device\n");
> - return 0;
> + return NETDEV_TX_OK;
> }
>
> tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
> if (!tx_data) {
> dev_kfree_skb(skb);
> netif_wake_queue(ndev);
> - return 0;
> + return NETDEV_TX_OK;
> }
>
> tx_data->buff = skb->data;
> @@ -710,7 +710,7 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
> srcu_read_unlock(&wilc->srcu, srcu_idx);
> }
>
> - return 0;
> + return NETDEV_TX_OK;
> }
>
> static int wilc_mac_close(struct net_device *ndev)
> --
> 2.27.0
>
--
Nicolas Ferre
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] staging/wilc1000: let wilc_mac_xmit() to NETDEV_TX_OK
2020-06-29 7:58 ` Nicolas.Ferre
@ 2020-07-02 6:48 ` Kalle Valo
0 siblings, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2020-07-02 6:48 UTC (permalink / raw)
To: Nicolas.Ferre
Cc: devel, Ajay.Kathat, gregkh, linux-wireless, linux-kernel,
adham.abozaeid, luc.vanoostenryck
<Nicolas.Ferre@microchip.com> writes:
> Luc,
>
> Thanks for your patch...
>
> On 28/06/2020 at 20:32, Luc Van Oostenryck wrote:
>> The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
>> which is a typedef for an enum type defining 'NETDEV_TX_OK' but this
>> driver returns '0' instead of 'NETDEV_TX_OK'.
>>
>> Fix this by returning ''NETDEV_TX_OK' instead of 0.
>>
>> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
>> ---
>> drivers/staging/wilc1000/netdev.c | 6 +++---
>
> ... would it be possible that you re-spin it so that it applies to the
> new location of this driver:
> drivers/net/wireless/microchip/wilc1000/netdev.c
>
> You can rebase your patch on the wireless-driver-next tree with
> wilc1000-move-out-of-staging branch:
>
> tree:
> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
> branch: wilc1000-move-out-of-staging
>
> (Then you can also review the subject line of your patch, BTW)
And also cc linux-wireless so that our patchwork sees it (not sure if
the original patch had it or not, just making sure), more info in the
link below.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-02 6:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-28 18:32 [PATCH] staging/wilc1000: let wilc_mac_xmit() to NETDEV_TX_OK Luc Van Oostenryck
2020-06-29 7:58 ` Nicolas.Ferre
2020-07-02 6:48 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).