All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Jan Kiszka <jan.kiszka@siemens.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Mark Brown <broonie@kernel.org>,
	"Jin, Le (RC-CN DF FA R&D)" <le.jin@siemens.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>,
	Ramuthevar Vadivel Murugan 
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<linux-spi@vger.kernel.org>, <simon.k.r.goldschmidt@gmail.com>,
	<dinguyen@kernel.org>, <marex@denx.de>
Subject: Re: [RESEND PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
Date: Thu, 27 Aug 2020 12:34:26 +0530	[thread overview]
Message-ID: <ed61022e-4141-9ae3-d24b-e60e42ae58e3@ti.com> (raw)
In-Reply-To: <c090b23a-488f-6eb3-206b-a7678b70a4e2@siemens.com>



On 8/26/20 7:01 PM, Jan Kiszka wrote:
> On 26.08.20 14:18, Vignesh Raghavendra wrote:
>> On 8/26/20 3:42 PM, Jan Kiszka wrote:
>>> On 24.08.20 19:20, Jan Kiszka wrote:
>>>> On 24.08.20 14:49, Jan Kiszka wrote:
>>>>> On 24.08.20 13:45, Vignesh Raghavendra wrote:
>>>>>>
[...]
>> Also, there seems to be DMA mapping related issue, that was always present in 
>> older driver as well. Could you see if diff [2] fixes the issue?
>>
>> [2] Use DMA device for mapping:
>>
>> ---><8---
>>
>>
>> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
>> index b9739ae919340..a546aa4598758 100644
>> --- a/drivers/spi/spi-cadence-quadspi.c
>> +++ b/drivers/spi/spi-cadence-quadspi.c
>> @@ -901,6 +901,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>  {
>>         struct cqspi_st *cqspi = f_pdata->cqspi;
>>         struct device *dev = &cqspi->pdev->dev;
>> +       struct device *ddev = cqspi->rx_chan->device->dev;
>>         enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
>>         dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
>>         int ret = 0;
>> @@ -917,8 +918,8 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>                 return 0;
>>         }
>>  
>> -       dma_dst = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
>> -       if (dma_mapping_error(dev, dma_dst)) {
>> +       dma_dst = dma_map_single(ddev, buf, len, DMA_FROM_DEVICE);
>> +       if (dma_mapping_error(ddev, dma_dst)) {
>>                 dev_err(dev, "dma mapping failed\n");
>>                 return -ENOMEM;
>>         }
>> @@ -952,7 +953,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>         }
>>  
>>  err_unmap:
>> -       dma_unmap_single(dev, dma_dst, len, DMA_FROM_DEVICE);
>> +       dma_unmap_single(ddev, dma_dst, len, DMA_FROM_DEVICE);
>>  
>>         return ret;
>>  }
>>
> 
> That seems to help! Wasn't able to reproduce the issue with this applied
> so far.
> 

OK, great... I will post this patch soon once I finish a bit more
testing... Thanks!


Regards
Vignesh

WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Jan Kiszka <jan.kiszka@siemens.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Mark Brown <broonie@kernel.org>,
	"Jin, Le (RC-CN DF FA R&D)" <le.jin@siemens.com>
Cc: marex@denx.de, Boris Brezillon <bbrezillon@kernel.org>,
	dinguyen@kernel.org, simon.k.r.goldschmidt@gmail.com,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	Ramuthevar Vadivel Murugan
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	linux-mtd@lists.infradead.org
Subject: Re: [RESEND PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
Date: Thu, 27 Aug 2020 12:34:26 +0530	[thread overview]
Message-ID: <ed61022e-4141-9ae3-d24b-e60e42ae58e3@ti.com> (raw)
In-Reply-To: <c090b23a-488f-6eb3-206b-a7678b70a4e2@siemens.com>



On 8/26/20 7:01 PM, Jan Kiszka wrote:
> On 26.08.20 14:18, Vignesh Raghavendra wrote:
>> On 8/26/20 3:42 PM, Jan Kiszka wrote:
>>> On 24.08.20 19:20, Jan Kiszka wrote:
>>>> On 24.08.20 14:49, Jan Kiszka wrote:
>>>>> On 24.08.20 13:45, Vignesh Raghavendra wrote:
>>>>>>
[...]
>> Also, there seems to be DMA mapping related issue, that was always present in 
>> older driver as well. Could you see if diff [2] fixes the issue?
>>
>> [2] Use DMA device for mapping:
>>
>> ---><8---
>>
>>
>> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
>> index b9739ae919340..a546aa4598758 100644
>> --- a/drivers/spi/spi-cadence-quadspi.c
>> +++ b/drivers/spi/spi-cadence-quadspi.c
>> @@ -901,6 +901,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>  {
>>         struct cqspi_st *cqspi = f_pdata->cqspi;
>>         struct device *dev = &cqspi->pdev->dev;
>> +       struct device *ddev = cqspi->rx_chan->device->dev;
>>         enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
>>         dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
>>         int ret = 0;
>> @@ -917,8 +918,8 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>                 return 0;
>>         }
>>  
>> -       dma_dst = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
>> -       if (dma_mapping_error(dev, dma_dst)) {
>> +       dma_dst = dma_map_single(ddev, buf, len, DMA_FROM_DEVICE);
>> +       if (dma_mapping_error(ddev, dma_dst)) {
>>                 dev_err(dev, "dma mapping failed\n");
>>                 return -ENOMEM;
>>         }
>> @@ -952,7 +953,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
>>         }
>>  
>>  err_unmap:
>> -       dma_unmap_single(dev, dma_dst, len, DMA_FROM_DEVICE);
>> +       dma_unmap_single(ddev, dma_dst, len, DMA_FROM_DEVICE);
>>  
>>         return ret;
>>  }
>>
> 
> That seems to help! Wasn't able to reproduce the issue with this applied
> so far.
> 

OK, great... I will post this patch soon once I finish a bit more
testing... Thanks!


Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-08-27  7:04 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-01  7:04 [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework Vignesh Raghavendra
2020-06-01  7:04 ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 1/8] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 2/8] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 3/8] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 4/8] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-08-22 18:05   ` Jan Kiszka
2020-08-22 18:05     ` Jan Kiszka
2020-08-24 11:45     ` Vignesh Raghavendra
2020-08-24 11:45       ` Vignesh Raghavendra
2020-08-24 12:49       ` Jan Kiszka
2020-08-24 12:49         ` Jan Kiszka
2020-08-24 17:20         ` Jan Kiszka
2020-08-24 17:20           ` Jan Kiszka
2020-08-26 10:12           ` Jan Kiszka
2020-08-26 10:12             ` Jan Kiszka
2020-08-26 12:18             ` Vignesh Raghavendra
2020-08-26 12:18               ` Vignesh Raghavendra
2020-08-26 13:31               ` Jan Kiszka
2020-08-26 13:31                 ` Jan Kiszka
2020-08-27  7:04                 ` Vignesh Raghavendra [this message]
2020-08-27  7:04                   ` Vignesh Raghavendra
2020-08-25  3:12         ` Jin, Le
2020-08-25  3:12           ` Jin, Le
2020-06-01  7:04 ` [RESEND PATCH v3 6/8] mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-01  7:04 ` [RESEND PATCH v3 7/8] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-08-24  5:55   ` Jan Kiszka
2020-08-24  5:55     ` Jan Kiszka
2020-08-24 11:44     ` Vignesh Raghavendra
2020-08-24 11:44       ` Vignesh Raghavendra
2020-08-24 12:04       ` Boris Brezillon
2020-08-24 12:04         ` Boris Brezillon
2020-08-24 13:52         ` Jan Kiszka
2020-08-24 13:52           ` Jan Kiszka
2020-08-24 12:06       ` Jan Kiszka
2020-08-24 12:06         ` Jan Kiszka
2020-06-01  7:04 ` [RESEND PATCH v3 8/8] spi: Move cadence-quadspi driver to drivers/spi/ Vignesh Raghavendra
2020-06-01  7:04   ` Vignesh Raghavendra
2020-06-19 10:57 ` [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework Mark Brown
2020-06-19 10:57   ` Mark Brown
2020-06-19 11:47   ` Tudor.Ambarus
2020-06-19 11:47     ` Tudor.Ambarus
2020-06-19 15:17     ` Mark Brown
2020-06-19 15:17       ` Mark Brown
2020-06-26  9:25       ` Tudor.Ambarus
2020-06-26  9:25         ` Tudor.Ambarus
2020-06-19 13:28 ` Mark Brown
2020-06-19 13:28   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ed61022e-4141-9ae3-d24b-e60e42ae58e3@ti.com \
    --to=vigneshr@ti.com \
    --cc=bbrezillon@kernel.org \
    --cc=broonie@kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=jan.kiszka@siemens.com \
    --cc=le.jin@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=simon.k.r.goldschmidt@gmail.com \
    --cc=tudor.ambarus@microchip.com \
    --cc=vadivel.muruganx.ramuthevar@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.