From: Anthony PERARD <anthony.perard@citrix.com> To: Bernhard Beschow <shentey@gmail.com> Cc: qemu-devel@nongnu.org, "Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>, "Paolo Bonzini" <pbonzini@redhat.com>, "David Woodhouse" <dwmw@amazon.co.uk>, "Hervé Poussineau" <hpoussin@reactos.org>, "Aurelien Jarno" <aurelien@aurel32.net>, "Eduardo Habkost" <eduardo@habkost.net>, "Paul Durrant" <paul@xen.org>, xen-devel@lists.xenproject.org, "Michael S. Tsirkin" <mst@redhat.com>, "Stefano Stabellini" <sstabellini@kernel.org>, "Richard Henderson" <richard.henderson@linaro.org>, "Philippe Mathieu-Daudé" <philmd@linaro.org>, "Chuck Zmudzinski" <brchuckz@aol.com> Subject: Re: [PATCH v3 2/6] hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() Date: Thu, 30 Mar 2023 14:00:25 +0100 [thread overview] Message-ID: <f52c41f7-e662-4afd-8ac9-ce2c0da2b1be@perard> (raw) In-Reply-To: <20230312120221.99183-3-shentey@gmail.com> On Sun, Mar 12, 2023 at 01:02:17PM +0100, Bernhard Beschow wrote: > This is a preparational patch for the next one to make the following > more obvious: > > First, pci_bus_irqs() is now called twice in case of Xen where the > second call overrides the pci_set_irq_fn with the Xen variant. pci_bus_irqs() does allocates pci_bus->irq_count, so the second call in piix3_xen_realize() will leak `pci_bus->irq_count`. Could you look if pci_bus_irqs_cleanup() can be called before the second pci_bus_irqs() call, or maybe some other way to avoid the leak? > Second, pci_bus_set_route_irq_fn() is now also called in Xen mode. > > Signed-off-by: Bernhard Beschow <shentey@gmail.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Beside the leak which I think can happen only once, patch is fine: Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Thanks, -- Anthony PERARD
WARNING: multiple messages have this Message-ID (diff)
From: Anthony PERARD via <qemu-devel@nongnu.org> To: Bernhard Beschow <shentey@gmail.com> Cc: qemu-devel@nongnu.org, "Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>, "Paolo Bonzini" <pbonzini@redhat.com>, "David Woodhouse" <dwmw@amazon.co.uk>, "Hervé Poussineau" <hpoussin@reactos.org>, "Aurelien Jarno" <aurelien@aurel32.net>, "Eduardo Habkost" <eduardo@habkost.net>, "Paul Durrant" <paul@xen.org>, xen-devel@lists.xenproject.org, "Michael S. Tsirkin" <mst@redhat.com>, "Stefano Stabellini" <sstabellini@kernel.org>, "Richard Henderson" <richard.henderson@linaro.org>, "Philippe Mathieu-Daudé" <philmd@linaro.org>, "Chuck Zmudzinski" <brchuckz@aol.com> Subject: Re: [PATCH v3 2/6] hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() Date: Thu, 30 Mar 2023 14:00:25 +0100 [thread overview] Message-ID: <f52c41f7-e662-4afd-8ac9-ce2c0da2b1be@perard> (raw) In-Reply-To: <20230312120221.99183-3-shentey@gmail.com> On Sun, Mar 12, 2023 at 01:02:17PM +0100, Bernhard Beschow wrote: > This is a preparational patch for the next one to make the following > more obvious: > > First, pci_bus_irqs() is now called twice in case of Xen where the > second call overrides the pci_set_irq_fn with the Xen variant. pci_bus_irqs() does allocates pci_bus->irq_count, so the second call in piix3_xen_realize() will leak `pci_bus->irq_count`. Could you look if pci_bus_irqs_cleanup() can be called before the second pci_bus_irqs() call, or maybe some other way to avoid the leak? > Second, pci_bus_set_route_irq_fn() is now also called in Xen mode. > > Signed-off-by: Bernhard Beschow <shentey@gmail.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Beside the leak which I think can happen only once, patch is fine: Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Thanks, -- Anthony PERARD
next prev parent reply other threads:[~2023-03-30 13:00 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-12 12:02 [PATCH v3 0/6] Resolve TYPE_PIIX3_XEN_DEVICE Bernhard Beschow 2023-03-12 12:02 ` [PATCH v3 1/6] include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq() Bernhard Beschow 2023-03-30 12:54 ` Anthony PERARD via 2023-03-30 12:54 ` Anthony PERARD 2023-03-12 12:02 ` [PATCH v3 2/6] hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() Bernhard Beschow 2023-03-30 13:00 ` Anthony PERARD [this message] 2023-03-30 13:00 ` Anthony PERARD via 2023-04-01 22:36 ` Bernhard Beschow 2023-04-03 8:08 ` Bernhard Beschow 2023-04-03 9:32 ` Anthony PERARD 2023-04-03 9:32 ` Anthony PERARD via 2023-04-03 12:27 ` Jason Andryuk 2023-04-03 20:36 ` Bernhard Beschow 2023-09-19 20:02 ` Bernhard Beschow 2023-09-20 14:44 ` Chuck Zmudzinski 2023-09-24 15:41 ` Bernhard Beschow 2023-03-12 12:02 ` [PATCH v3 3/6] hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3 Bernhard Beschow 2023-03-30 13:03 ` Anthony PERARD via 2023-03-30 13:03 ` Anthony PERARD 2023-03-12 12:02 ` [PATCH v3 4/6] hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config() Bernhard Beschow 2023-03-30 13:04 ` Anthony PERARD via 2023-03-30 13:04 ` Anthony PERARD 2023-03-12 12:02 ` [PATCH v3 5/6] hw/isa/piix3: Resolve redundant k->config_write assignments Bernhard Beschow 2023-03-30 13:05 ` Anthony PERARD via 2023-03-30 13:05 ` Anthony PERARD 2023-03-12 12:02 ` [PATCH v3 6/6] hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE Bernhard Beschow 2023-03-30 13:05 ` Anthony PERARD 2023-03-30 13:05 ` Anthony PERARD via
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=f52c41f7-e662-4afd-8ac9-ce2c0da2b1be@perard \ --to=anthony.perard@citrix.com \ --cc=aurelien@aurel32.net \ --cc=brchuckz@aol.com \ --cc=dwmw@amazon.co.uk \ --cc=eduardo@habkost.net \ --cc=hpoussin@reactos.org \ --cc=marcel.apfelbaum@gmail.com \ --cc=mst@redhat.com \ --cc=paul@xen.org \ --cc=pbonzini@redhat.com \ --cc=philmd@linaro.org \ --cc=qemu-devel@nongnu.org \ --cc=richard.henderson@linaro.org \ --cc=shentey@gmail.com \ --cc=sstabellini@kernel.org \ --cc=xen-devel@lists.xenproject.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.