From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 05/11] arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
Date: Fri, 16 Jun 2017 15:30:13 +0200 [thread overview]
Message-ID: <fb5202dbebfd8fbfc68c67cbed7d4e86f43f6f86.1497617276.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1497617276.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Split off support for H3ULCB boards with the ES1.x revision of the R-Car
H3 SoC into a separate file. The main r8a7795-h3ulcb.dts file now
corresponds to H3ULCB with R-Car H3 ES2.0 or later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts | 42 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +--
3 files changed, 45 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index b6c723d8f687..d5451015950e 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
new file mode 100644
index 000000000000..95fe207cb6a3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 95fe207cb6a3..0426f41765f0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,11 +12,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a7795.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory@48000000 {
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/11] arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
Date: Fri, 16 Jun 2017 15:30:13 +0200 [thread overview]
Message-ID: <fb5202dbebfd8fbfc68c67cbed7d4e86f43f6f86.1497617276.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1497617276.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Split off support for H3ULCB boards with the ES1.x revision of the R-Car
H3 SoC into a separate file. The main r8a7795-h3ulcb.dts file now
corresponds to H3ULCB with R-Car H3 ES2.0 or later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts | 42 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +--
3 files changed, 45 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index b6c723d8f687..d5451015950e 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
new file mode 100644
index 000000000000..95fe207cb6a3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
+/dts-v1/;
+#include "r8a7795-es1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory at 500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory at 600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory at 700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 95fe207cb6a3..0426f41765f0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,11 +12,11 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
/dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a7795.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory at 48000000 {
--
2.1.4
next prev parent reply other threads:[~2017-06-16 13:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.13 Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 01/11] arm64: dts: salvator-x: add 12288000 for sound ADG Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 02/11] arm64: dts: ulcb: " Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 03/11] arm64: dts: r8a7795: add DMA for IIC_DVFS Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 04/11] arm64: dts: r8a7796: " Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` Simon Horman [this message]
2017-06-16 13:30 ` [PATCH 05/11] arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0 Simon Horman
2017-06-16 13:30 ` [PATCH 06/11] arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 07/11] arm64: dts: renesas: Extract common Salvator-X/XS board support Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 08/11] arm64: dts: renesas: Add common Salvator-XS " Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 09/11] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0 Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 10/11] arm64: dts: r8a7795: Add reset control properties for audio Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 11/11] arm64: dts: r8a7796: " Simon Horman
2017-06-16 13:30 ` Simon Horman
2017-06-19 5:44 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.13 Olof Johansson
2017-06-19 5:44 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb5202dbebfd8fbfc68c67cbed7d4e86f43f6f86.1497617276.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.