Git Mailing List Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters'
@ 2020-06-30 17:17 Taylor Blau
  2020-06-30 17:17 ` [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places Taylor Blau
                   ` (3 more replies)
  0 siblings, 4 replies; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 17:17 UTC (permalink / raw)
  To: git; +Cc: peff, dstolee

Hi,

Here are some patches that we have been using at GitHub to control
whether or not Bloom filters stored in commit-graphs are read during
normal operation.

We're planning on using these patches as part of a two-phase roll-out of
changed-path Bloom filters, where the first phase conditions whether or
not repositories *write* Bloom filters, and the second phase (controlled
via the new 'core.useBloomFilters') controls whether repositories *read*
their Bloom filters.

This can also be handy for debugging purposes, say, for e.g., if Bloom
filters are suspected to be corrupt, they can be softly disabled without
dropping the rest of the data in the commit-graph.

Thanks in advance for your review.

-Taylor

Taylor Blau (3):
  commit-graph: pass a 'struct repository *' in more places
  t4216: fix broken '&&'-chain
  commit-graph: respect 'core.useBloomFilters'

 Documentation/config/core.txt |  5 +++++
 builtin/commit-graph.c        |  2 +-
 commit-graph.c                | 17 ++++++++++-------
 commit-graph.h                |  4 +++-
 fuzz-commit-graph.c           |  5 +++--
 repo-settings.c               |  3 +++
 repository.h                  |  1 +
 t/helper/test-read-graph.c    |  3 ++-
 t/t4216-log-bloom.sh          |  6 ++++--
 9 files changed, 32 insertions(+), 14 deletions(-)

--
2.27.0.224.g4cfa086e50

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places
  2020-06-30 17:17 [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
@ 2020-06-30 17:17 ` Taylor Blau
  2020-06-30 20:52   ` Derrick Stolee
  2020-06-30 17:17 ` [PATCH 2/3] t4216: fix broken '&&'-chain Taylor Blau
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 17:17 UTC (permalink / raw)
  To: git; +Cc: peff, dstolee

In a future commit, some commit-graph internals will want access to
'r->settings', but we only have the 'struct object_directory *'
corresponding to that repository.

Add an additional parameter to pass the repository around in more
places. In the next patch, we will remove the object directory (and
instead reference it with 'r->odb').

Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 builtin/commit-graph.c |  2 +-
 commit-graph.c         | 13 ++++++++-----
 commit-graph.h         |  4 +++-
 fuzz-commit-graph.c    |  5 +++--
 4 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/builtin/commit-graph.c b/builtin/commit-graph.c
index 75455da138..7c0f98531d 100644
--- a/builtin/commit-graph.c
+++ b/builtin/commit-graph.c
@@ -106,7 +106,7 @@ static int graph_verify(int argc, const char **argv)
 	FREE_AND_NULL(graph_name);
 
 	if (open_ok)
-		graph = load_commit_graph_one_fd_st(fd, &st, odb);
+		graph = load_commit_graph_one_fd_st(fd, &st, the_repository, odb);
 	else
 		graph = read_commit_graph_one(the_repository, odb);
 
diff --git a/commit-graph.c b/commit-graph.c
index 2ff042fbf4..fdfb0888f0 100644
--- a/commit-graph.c
+++ b/commit-graph.c
@@ -170,6 +170,7 @@ int open_commit_graph(const char *graph_file, int *fd, struct stat *st)
 }
 
 struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
+						 struct repository *r,
 						 struct object_directory *odb)
 {
 	void *graph_map;
@@ -185,7 +186,7 @@ struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
 	}
 	graph_map = xmmap(NULL, graph_size, PROT_READ, MAP_PRIVATE, fd, 0);
 	close(fd);
-	ret = parse_commit_graph(graph_map, graph_size);
+	ret = parse_commit_graph(r, graph_map, graph_size);
 
 	if (ret)
 		ret->odb = odb;
@@ -225,7 +226,8 @@ static int verify_commit_graph_lite(struct commit_graph *g)
 	return 0;
 }
 
-struct commit_graph *parse_commit_graph(void *graph_map, size_t graph_size)
+struct commit_graph *parse_commit_graph(struct repository *r,
+					void *graph_map, size_t graph_size)
 {
 	const unsigned char *data, *chunk_lookup;
 	uint32_t i;
@@ -396,6 +398,7 @@ struct commit_graph *parse_commit_graph(void *graph_map, size_t graph_size)
 }
 
 static struct commit_graph *load_commit_graph_one(const char *graph_file,
+						  struct repository *r,
 						  struct object_directory *odb)
 {
 
@@ -407,7 +410,7 @@ static struct commit_graph *load_commit_graph_one(const char *graph_file,
 	if (!open_ok)
 		return NULL;
 
-	g = load_commit_graph_one_fd_st(fd, &st, odb);
+	g = load_commit_graph_one_fd_st(fd, &st, r, odb);
 
 	if (g)
 		g->filename = xstrdup(graph_file);
@@ -419,7 +422,7 @@ static struct commit_graph *load_commit_graph_v1(struct repository *r,
 						 struct object_directory *odb)
 {
 	char *graph_name = get_commit_graph_filename(odb);
-	struct commit_graph *g = load_commit_graph_one(graph_name, odb);
+	struct commit_graph *g = load_commit_graph_one(graph_name, r, odb);
 	free(graph_name);
 
 	return g;
@@ -500,7 +503,7 @@ static struct commit_graph *load_commit_graph_chain(struct repository *r,
 		valid = 0;
 		for (odb = r->objects->odb; odb; odb = odb->next) {
 			char *graph_name = get_split_graph_filename(odb, line.buf);
-			struct commit_graph *g = load_commit_graph_one(graph_name, odb);
+			struct commit_graph *g = load_commit_graph_one(graph_name, r, odb);
 
 			free(graph_name);
 
diff --git a/commit-graph.h b/commit-graph.h
index 3ba0da1e5f..03d848e168 100644
--- a/commit-graph.h
+++ b/commit-graph.h
@@ -76,10 +76,12 @@ struct commit_graph {
 };
 
 struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
+						 struct repository *r,
 						 struct object_directory *odb);
 struct commit_graph *read_commit_graph_one(struct repository *r,
 					   struct object_directory *odb);
-struct commit_graph *parse_commit_graph(void *graph_map, size_t graph_size);
+struct commit_graph *parse_commit_graph(struct repository *r,
+					void *graph_map, size_t graph_size);
 
 /*
  * Return 1 if and only if the repository has a commit-graph
diff --git a/fuzz-commit-graph.c b/fuzz-commit-graph.c
index 430817214d..e7cf6d5b0f 100644
--- a/fuzz-commit-graph.c
+++ b/fuzz-commit-graph.c
@@ -1,7 +1,8 @@
 #include "commit-graph.h"
 #include "repository.h"
 
-struct commit_graph *parse_commit_graph(void *graph_map, size_t graph_size);
+struct commit_graph *parse_commit_graph(struct repository *r,
+					void *graph_map, size_t graph_size);
 
 int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size);
 
@@ -10,7 +11,7 @@ int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size)
 	struct commit_graph *g;
 
 	initialize_the_repository();
-	g = parse_commit_graph((void *)data, size);
+	g = parse_commit_graph(the_repository, (void *)data, size);
 	repo_clear(the_repository);
 	free_commit_graph(g);
 
-- 
2.27.0.224.g4cfa086e50


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 17:17 [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
  2020-06-30 17:17 ` [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places Taylor Blau
@ 2020-06-30 17:17 ` Taylor Blau
  2020-06-30 17:50   ` Eric Sunshine
  2020-06-30 17:17 ` [PATCH 3/3] commit-graph: respect 'core.useBloomFilters' Taylor Blau
  2020-08-03 19:02 ` [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
  3 siblings, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 17:17 UTC (permalink / raw)
  To: git; +Cc: peff, dstolee

In a759bfa9ee (t4216: add end to end tests for git log with Bloom
filters, 2020-04-06), a 'rm' invocation was added without a
corresponding '&&' chain.

This ends up working fine when the file already exists, in which case
'rm' exits cleanly and the rest of the function executes normally. When
the file does _not_ exist, however, 'rm' returns an unclean exit code,
causing the function to terminate.

Fix this by making the test use an '&&'-chain, and passing '-f' to
ignore missing files (as can be the case when specifying which tests are
'--run').

Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 t/t4216-log-bloom.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
index c855bcd3e7..0b4cc4f8d1 100755
--- a/t/t4216-log-bloom.sh
+++ b/t/t4216-log-bloom.sh
@@ -53,7 +53,7 @@ sane_unset GIT_TRACE2_PERF_BRIEF
 sane_unset GIT_TRACE2_CONFIG_PARAMS
 
 setup () {
-	rm "$TRASH_DIRECTORY/trace.perf"
+	rm -f "$TRASH_DIRECTORY/trace.perf" &&
 	git -c core.commitGraph=false log --pretty="format:%s" $1 >log_wo_bloom &&
 	GIT_TRACE2_PERF="$TRASH_DIRECTORY/trace.perf" git -c core.commitGraph=true log --pretty="format:%s" $1 >log_w_bloom
 }
-- 
2.27.0.224.g4cfa086e50


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 3/3] commit-graph: respect 'core.useBloomFilters'
  2020-06-30 17:17 [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
  2020-06-30 17:17 ` [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places Taylor Blau
  2020-06-30 17:17 ` [PATCH 2/3] t4216: fix broken '&&'-chain Taylor Blau
@ 2020-06-30 17:17 ` Taylor Blau
  2020-06-30 19:18   ` Jeff King
  2020-08-03 19:02 ` [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
  3 siblings, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 17:17 UTC (permalink / raw)
  To: git; +Cc: peff, dstolee

Git uses the 'core.commitGraph' configuration value to control whether
or not the commit graph is used when parsing commits or performing a
traversal.

Now that commit-graphs can also contain a section for changed-path Bloom
filters, administrators that already have commit-graphs may find it
convenient to use those graphs without relying on their changed-path
Bloom filters. This can happen, for example, during a staged roll-out,
or in the event of an incident.

Introduce 'core.useBloomFilters' to control whether or not Bloom filters
are read. Note that this configuration is independent from both:

  - 'core.commitGraph', to allow flexibility in using all parts of a
    commit-graph _except_ for its Bloom filters.

  - The '--changed-paths' option for 'git commit-graph write', to allow
    reading and writing Bloom filters to be controlled independently.

When the variable is set, pretend as if no Bloom data was specified at
all. This avoids adding additional special-casing outside of the
commit-graph internals.

Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 Documentation/config/core.txt | 5 +++++
 commit-graph.c                | 4 ++--
 repo-settings.c               | 3 +++
 repository.h                  | 1 +
 t/helper/test-read-graph.c    | 3 ++-
 t/t4216-log-bloom.sh          | 4 +++-
 6 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt
index 74619a9c03..b146bf8d34 100644
--- a/Documentation/config/core.txt
+++ b/Documentation/config/core.txt
@@ -599,6 +599,11 @@ core.commitGraph::
 	to parse the graph structure of commits. Defaults to true. See
 	linkgit:git-commit-graph[1] for more information.
 
+core.useBloomFilters::
+	If true, then git will use the changed-path Bloom filters in the
+	commit-graph file (if it exists, and they are present). Defaults to
+	true. See linkgit:git-commit-graph[1] for more information.
+
 core.useReplaceRefs::
 	If set to `false`, behave as if the `--no-replace-objects`
 	option was given on the command line. See linkgit:git[1] and
diff --git a/commit-graph.c b/commit-graph.c
index fdfb0888f0..03c00415c4 100644
--- a/commit-graph.c
+++ b/commit-graph.c
@@ -337,14 +337,14 @@ struct commit_graph *parse_commit_graph(struct repository *r,
 		case GRAPH_CHUNKID_BLOOMINDEXES:
 			if (graph->chunk_bloom_indexes)
 				chunk_repeated = 1;
-			else
+			else if (r->settings.core_use_bloom_filters)
 				graph->chunk_bloom_indexes = data + chunk_offset;
 			break;
 
 		case GRAPH_CHUNKID_BLOOMDATA:
 			if (graph->chunk_bloom_data)
 				chunk_repeated = 1;
-			else {
+			else if (r->settings.core_use_bloom_filters) {
 				uint32_t hash_version;
 				graph->chunk_bloom_data = data + chunk_offset;
 				hash_version = get_be32(data + chunk_offset);
diff --git a/repo-settings.c b/repo-settings.c
index dc6817daa9..d8e3b1c61e 100644
--- a/repo-settings.c
+++ b/repo-settings.c
@@ -17,9 +17,12 @@ void prepare_repo_settings(struct repository *r)
 
 	if (!repo_config_get_bool(r, "core.commitgraph", &value))
 		r->settings.core_commit_graph = value;
+	if (!repo_config_get_bool(r, "core.usebloomfilters", &value))
+		r->settings.core_use_bloom_filters = value;
 	if (!repo_config_get_bool(r, "gc.writecommitgraph", &value))
 		r->settings.gc_write_commit_graph = value;
 	UPDATE_DEFAULT_BOOL(r->settings.core_commit_graph, 1);
+	UPDATE_DEFAULT_BOOL(r->settings.core_use_bloom_filters, 1);
 	UPDATE_DEFAULT_BOOL(r->settings.gc_write_commit_graph, 1);
 
 	if (!repo_config_get_int(r, "index.version", &value))
diff --git a/repository.h b/repository.h
index 3c1f7d54bd..cc61533122 100644
--- a/repository.h
+++ b/repository.h
@@ -29,6 +29,7 @@ struct repo_settings {
 	int initialized;
 
 	int core_commit_graph;
+	int core_use_bloom_filters;
 	int gc_write_commit_graph;
 	int fetch_write_commit_graph;
 
diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c
index 6d0c962438..5f585a1725 100644
--- a/t/helper/test-read-graph.c
+++ b/t/helper/test-read-graph.c
@@ -12,11 +12,12 @@ int cmd__read_graph(int argc, const char **argv)
 	setup_git_directory();
 	odb = the_repository->objects->odb;
 
+	prepare_repo_settings(the_repository);
+
 	graph = read_commit_graph_one(the_repository, odb);
 	if (!graph)
 		return 1;
 
-
 	printf("header: %08x %d %d %d %d\n",
 		ntohl(*(uint32_t*)graph->data),
 		*(unsigned char*)(graph->data + 4),
diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
index 0b4cc4f8d1..b1a247477e 100755
--- a/t/t4216-log-bloom.sh
+++ b/t/t4216-log-bloom.sh
@@ -90,7 +90,9 @@ do
 		      "--ancestry-path side..master"
 	do
 		test_expect_success "git log option: $option for path: $path" '
-			test_bloom_filters_used "$option -- $path"
+			test_bloom_filters_used "$option -- $path" &&
+			test_config core.useBloomFilters false &&
+			test_bloom_filters_not_used "$option -- $path"
 		'
 	done
 done
-- 
2.27.0.224.g4cfa086e50

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 17:17 ` [PATCH 2/3] t4216: fix broken '&&'-chain Taylor Blau
@ 2020-06-30 17:50   ` Eric Sunshine
  2020-06-30 18:39     ` Taylor Blau
  2020-06-30 18:55     ` Jeff King
  0 siblings, 2 replies; 16+ messages in thread
From: Eric Sunshine @ 2020-06-30 17:50 UTC (permalink / raw)
  To: Taylor Blau; +Cc: Git List, Jeff King, Derrick Stolee

On Tue, Jun 30, 2020 at 1:17 PM Taylor Blau <me@ttaylorr.com> wrote:
> In a759bfa9ee (t4216: add end to end tests for git log with Bloom
> filters, 2020-04-06), a 'rm' invocation was added without a
> corresponding '&&' chain.
>
> This ends up working fine when the file already exists, in which case
> 'rm' exits cleanly and the rest of the function executes normally. When
> the file does _not_ exist, however, 'rm' returns an unclean exit code,
> causing the function to terminate.

This explanation makes no sense. Since this command was not part of
the &&-chain, its failure would not cause the function to terminate
prematurely nor would it affect the return value of the function. This
explanation would make sense, however, if you're talking about the
behavior _after_ fixing the broken &&-chain.

> Fix this by making the test use an '&&'-chain, and passing '-f' to
> ignore missing files (as can be the case when specifying which tests are
> '--run').

The entire commit message is talking about implementation details and
merely repeats what the subject and patch itself already say quite
clearly; anyone familiar with 'rm' understands implicitly that '-f'
must be added to incorporate it into the &&-chain if the file's
presence is not guaranteed. Thus, you could drop the entire body of
the commit message without losing clarity...

With one minor exception: What is much more interesting for the reader
to know is whether the file being removed is guaranteed to exist (in
which case '-f' is unnecessary) or may be missing (requiring '-f'),
and under what conditions it might be missing. The very last part of
the last sentence of the current commit message gives a good hint
about the latter, thus would be a good bit to retain.

> diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
> @@ -53,7 +53,7 @@ sane_unset GIT_TRACE2_PERF_BRIEF
>  sane_unset GIT_TRACE2_CONFIG_PARAMS

Not related to this patch, but 'sane_unset' is pointless outside of a
test since there is no &&-chain to maintain. Plain 'unset' would work
just as well and be less misleading.

>  setup () {
> -       rm "$TRASH_DIRECTORY/trace.perf"
> +       rm -f "$TRASH_DIRECTORY/trace.perf" &&

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 17:50   ` Eric Sunshine
@ 2020-06-30 18:39     ` Taylor Blau
  2020-06-30 19:03       ` Jeff King
  2020-06-30 18:55     ` Jeff King
  1 sibling, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 18:39 UTC (permalink / raw)
  To: Eric Sunshine; +Cc: Taylor Blau, Git List, Jeff King, Derrick Stolee

On Tue, Jun 30, 2020 at 01:50:22PM -0400, Eric Sunshine wrote:
> On Tue, Jun 30, 2020 at 1:17 PM Taylor Blau <me@ttaylorr.com> wrote:
> > In a759bfa9ee (t4216: add end to end tests for git log with Bloom
> > filters, 2020-04-06), a 'rm' invocation was added without a
> > corresponding '&&' chain.
> >
> > This ends up working fine when the file already exists, in which case
> > 'rm' exits cleanly and the rest of the function executes normally. When
> > the file does _not_ exist, however, 'rm' returns an unclean exit code,
> > causing the function to terminate.
>
> This explanation makes no sense. Since this command was not part of
> the &&-chain, its failure would not cause the function to terminate
> prematurely nor would it affect the return value of the function. This
> explanation would make sense, however, if you're talking about the
> behavior _after_ fixing the broken &&-chain.

Fair enough. For what it's worth, this explanation *does* make sense if
you 'set -e' beforehand, which I am accustomed to (and had incorrectly
assumed that tests in 't' also have 'set -e', when they do not).

I've corrected the patch and shortened it to account for your
suggestions. Mind taking a look at the updated version and telling me
what you think?

--- >8 ---

Subject: [PATCH] t4216: fix broken '&&'-chain

The 'rm' added in a759bfa9ee (t4216: add end to end tests for git log
with Bloom filters, 2020-04-06) should be placed within the function's
'&&'-chain.

The file being removed may not exist (for eg., in the case of '--run',
in which case it may not be generated beforehand by a skipped test), and
so add '-f' to account for the file's optional existence.

Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 t/t4216-log-bloom.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
index c855bcd3e7..0b4cc4f8d1 100755
--- a/t/t4216-log-bloom.sh
+++ b/t/t4216-log-bloom.sh
@@ -53,7 +53,7 @@ sane_unset GIT_TRACE2_PERF_BRIEF
 sane_unset GIT_TRACE2_CONFIG_PARAMS

 setup () {
-	rm "$TRASH_DIRECTORY/trace.perf"
+	rm -f "$TRASH_DIRECTORY/trace.perf" &&
 	git -c core.commitGraph=false log --pretty="format:%s" $1 >log_wo_bloom &&
 	GIT_TRACE2_PERF="$TRASH_DIRECTORY/trace.perf" git -c core.commitGraph=true log --pretty="format:%s" $1 >log_w_bloom
 }
--
2.27.0.224.g4cfa086e50


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 17:50   ` Eric Sunshine
  2020-06-30 18:39     ` Taylor Blau
@ 2020-06-30 18:55     ` Jeff King
  1 sibling, 0 replies; 16+ messages in thread
From: Jeff King @ 2020-06-30 18:55 UTC (permalink / raw)
  To: Eric Sunshine; +Cc: Taylor Blau, Git List, Derrick Stolee

On Tue, Jun 30, 2020 at 01:50:22PM -0400, Eric Sunshine wrote:

> > diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh
> > @@ -53,7 +53,7 @@ sane_unset GIT_TRACE2_PERF_BRIEF
> >  sane_unset GIT_TRACE2_CONFIG_PARAMS
> 
> Not related to this patch, but 'sane_unset' is pointless outside of a
> test since there is no &&-chain to maintain. Plain 'unset' would work
> just as well and be less misleading.

We do this in lots of other places, too. Try:

  git grep sane_unset | grep -v '&&'

Though seeing the variables they cover, I think many of them may come
from the same few authors. :)

I wonder if it is worth keeping these as sane_unset, though. Your
comment is based on the knowledge that the "sane" part of the function
is ignoring the return value. But we could conceivably have other
portability fixes (it's not impossible that a shell wants one "unset"
per variable, for example), in which case we'd want it in more places.

That's hypothetical, of course, but saying "just use our portable unset
wrapper that behaves sanely" seems like exactly what these call sites
want, now and in a hypothetical future.

-Peff

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 18:39     ` Taylor Blau
@ 2020-06-30 19:03       ` Jeff King
  2020-06-30 19:12         ` Taylor Blau
  2020-06-30 19:48         ` Eric Sunshine
  0 siblings, 2 replies; 16+ messages in thread
From: Jeff King @ 2020-06-30 19:03 UTC (permalink / raw)
  To: Taylor Blau; +Cc: Eric Sunshine, Git List, Derrick Stolee

On Tue, Jun 30, 2020 at 02:39:28PM -0400, Taylor Blau wrote:

> > > This ends up working fine when the file already exists, in which case
> > > 'rm' exits cleanly and the rest of the function executes normally. When
> > > the file does _not_ exist, however, 'rm' returns an unclean exit code,
> > > causing the function to terminate.
> >
> > This explanation makes no sense. Since this command was not part of
> > the &&-chain, its failure would not cause the function to terminate
> > prematurely nor would it affect the return value of the function. This
> > explanation would make sense, however, if you're talking about the
> > behavior _after_ fixing the broken &&-chain.
> 
> Fair enough. For what it's worth, this explanation *does* make sense if
> you 'set -e' beforehand, which I am accustomed to (and had incorrectly
> assumed that tests in 't' also have 'set -e', when they do not).

If we _really_ want to nitpick, it probably wouldn't terminate under
"set -e" because the call to "setup" is itself part of an &&-chain,
which suppresses "-e" handling (which is one of the many confusing "set
-e" behaviors that led us to avoid it in the first place).

But definitely your revised commit message below is more accurate.

However...

> --- >8 ---
> 
> Subject: [PATCH] t4216: fix broken '&&'-chain
> 
> The 'rm' added in a759bfa9ee (t4216: add end to end tests for git log
> with Bloom filters, 2020-04-06) should be placed within the function's
> '&&'-chain.
> 
> The file being removed may not exist (for eg., in the case of '--run',
> in which case it may not be generated beforehand by a skipped test), and
> so add '-f' to account for the file's optional existence.

Is the &&-chain really broken, or is the first command simply not part
of that chain? Perhaps a question for philosophers, but the more applied
question here is: what are we improving, and why?

The original code handled the fact that the file might not exist by not
including its exit code in the &&-chain which leads to the function's
return value. Your new code does so by putting it in the &&-chain but
asking "rm" to ignore errors. Is one better than the other?

I think so, but my argument would be more along the lines of:

  - without "-f", "rm" will complain about a missing file, which is
    distracting noise in the test log

  - once "-f" is added in to suppress that, we might as well add the
    command to the &&-chain. That's our normal style, so readers don't
    have to wonder if it's important or not. Plus it would help avoid a
    broken chain if more commands are added at the beginning of the
    function.

-Peff

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 19:03       ` Jeff King
@ 2020-06-30 19:12         ` Taylor Blau
  2020-06-30 19:19           ` Jeff King
  2020-06-30 19:48         ` Eric Sunshine
  1 sibling, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 19:12 UTC (permalink / raw)
  To: Jeff King; +Cc: Taylor Blau, Eric Sunshine, Git List, Derrick Stolee

On Tue, Jun 30, 2020 at 03:03:25PM -0400, Jeff King wrote:
> On Tue, Jun 30, 2020 at 02:39:28PM -0400, Taylor Blau wrote:
>
> > > > This ends up working fine when the file already exists, in which case
> > > > 'rm' exits cleanly and the rest of the function executes normally. When
> > > > the file does _not_ exist, however, 'rm' returns an unclean exit code,
> > > > causing the function to terminate.
> > >
> > > This explanation makes no sense. Since this command was not part of
> > > the &&-chain, its failure would not cause the function to terminate
> > > prematurely nor would it affect the return value of the function. This
> > > explanation would make sense, however, if you're talking about the
> > > behavior _after_ fixing the broken &&-chain.
> >
> > Fair enough. For what it's worth, this explanation *does* make sense if
> > you 'set -e' beforehand, which I am accustomed to (and had incorrectly
> > assumed that tests in 't' also have 'set -e', when they do not).
>
> If we _really_ want to nitpick, it probably wouldn't terminate under
> "set -e" because the call to "setup" is itself part of an &&-chain,
> which suppresses "-e" handling (which is one of the many confusing "set
> -e" behaviors that led us to avoid it in the first place).

I learned something new about 'set -e'! I don't mind nitpicking at all,
it's useful information to know...

> But definitely your revised commit message below is more accurate.
>
> However...
>
> > --- >8 ---
> >
> > Subject: [PATCH] t4216: fix broken '&&'-chain
> >
> > The 'rm' added in a759bfa9ee (t4216: add end to end tests for git log
> > with Bloom filters, 2020-04-06) should be placed within the function's
> > '&&'-chain.
> >
> > The file being removed may not exist (for eg., in the case of '--run',
> > in which case it may not be generated beforehand by a skipped test), and
> > so add '-f' to account for the file's optional existence.
>
> Is the &&-chain really broken, or is the first command simply not part
> of that chain? Perhaps a question for philosophers, but the more applied
> question here is: what are we improving, and why?
>
> The original code handled the fact that the file might not exist by not
> including its exit code in the &&-chain which leads to the function's
> return value. Your new code does so by putting it in the &&-chain but
> asking "rm" to ignore errors. Is one better than the other?
>
> I think so, but my argument would be more along the lines of:
>
>   - without "-f", "rm" will complain about a missing file, which is
>     distracting noise in the test log
>
>   - once "-f" is added in to suppress that, we might as well add the
>     command to the &&-chain. That's our normal style, so readers don't
>     have to wonder if it's important or not. Plus it would help avoid a
>     broken chain if more commands are added at the beginning of the
>     function.

I made the change for basically these reasons, but mostly to bring this
function into good style as with the rest of our test suite (there are a
handful of other minor nits that we could look at, such as some odd
spacing, etc.).

Whether or not all of this needs to go into the commit message... I
don't know. On the one hand, I think that your explanation here is
clearer than what I wrote in the commit message, but on the other hand,
I think that amending it again may be belaboring an otherwise simple
change.

If you feel strongly, though, I'm happy to send a revised patch.

> -Peff

Thanks,
Taylor

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 3/3] commit-graph: respect 'core.useBloomFilters'
  2020-06-30 17:17 ` [PATCH 3/3] commit-graph: respect 'core.useBloomFilters' Taylor Blau
@ 2020-06-30 19:18   ` Jeff King
  2020-06-30 19:27     ` Taylor Blau
  0 siblings, 1 reply; 16+ messages in thread
From: Jeff King @ 2020-06-30 19:18 UTC (permalink / raw)
  To: Taylor Blau; +Cc: git, dstolee

On Tue, Jun 30, 2020 at 01:17:48PM -0400, Taylor Blau wrote:

> Git uses the 'core.commitGraph' configuration value to control whether
> or not the commit graph is used when parsing commits or performing a
> traversal.

I think this is a good thing to have, and the patch itself makes sense
to me (this is actually my first time reviewing it, despite its intended
use within GitHub :) ).

If I may bikeshed for a moment:

> Introduce 'core.useBloomFilters' to control whether or not Bloom filters
> are read. Note that this configuration is independent from both:
> 
>   - 'core.commitGraph', to allow flexibility in using all parts of a
>     commit-graph _except_ for its Bloom filters.
> 
>   - The '--changed-paths' option for 'git commit-graph write', to allow
>     reading and writing Bloom filters to be controlled independently.

Should we avoid exposing the user to the words "Bloom filter"?

The command-line option for writing them was genericized to
"changed-paths", which I think is good. The use of Bloom filters is an
implementation detail. What the user cares about is whether we can
optimize queries of which paths changed in a commit.

When we introduced reachability bitmaps long ago, we made the mistake of
just calling them "bitmaps". That jargon is well understood by people
who work with that code, but it's confusing outside of that (even within
other parts of Git) because bitmaps are just a generic data structure.
You can have a bitmap of just about anything (and indeed we do use other
bitmaps these days). Consistently calling them "reachability bitmaps",
especially in the user facing bits, would have reduced confusion over
the years.

Similarly, Bloom filters are a generic structure we might use elsewhere.
I don't really care if we use the word "Bloom" internally to refer to
this feature, but we'll be stuck with this config option for all time. I
think it's worth picking something more clear.

It might even be worth considering whether "changed paths" needs more
context (or would if we add new features in the future). On a "git
commit-graph write" command-line it is perfectly clear, but would
core.commitGraphChangedPaths be worth it? It's definitely more specific,
but it's also way more ugly. ;)

> diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c
> index 6d0c962438..5f585a1725 100644
> --- a/t/helper/test-read-graph.c
> +++ b/t/helper/test-read-graph.c
> @@ -12,11 +12,12 @@ int cmd__read_graph(int argc, const char **argv)
>  	setup_git_directory();
>  	odb = the_repository->objects->odb;
>  
> +	prepare_repo_settings(the_repository);
> +
>  	graph = read_commit_graph_one(the_repository, odb);

I wondered why we would need this prepare_repo_settings() now, when it
should have been needed already to cover core.commitGraph already. I
strongly suspect the answer is: "test-tool read-graph" never properly
respected core.commitGraph in the first place.

And now presumably it would. If true, I don't think any tests need
adjusted because the only places we set it are:

  - on a "git -c" command line, which wouldn't run a test-tool helper

  - when we do set it, it is always to "true", which is the default
    anyway

>  	if (!graph)
>  		return 1;
>  
> -
>  	printf("header: %08x %d %d %d %d\n",
>  		ntohl(*(uint32_t*)graph->data),
>  		*(unsigned char*)(graph->data + 4),

Oh good, I happened to be looking at this code earlier today for an
unrelated reason and was bothered by this extra newline. :)

-Peff

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 19:12         ` Taylor Blau
@ 2020-06-30 19:19           ` Jeff King
  0 siblings, 0 replies; 16+ messages in thread
From: Jeff King @ 2020-06-30 19:19 UTC (permalink / raw)
  To: Taylor Blau; +Cc: Eric Sunshine, Git List, Derrick Stolee

On Tue, Jun 30, 2020 at 03:12:31PM -0400, Taylor Blau wrote:

> > I think so, but my argument would be more along the lines of:
> >
> >   - without "-f", "rm" will complain about a missing file, which is
> >     distracting noise in the test log
> >
> >   - once "-f" is added in to suppress that, we might as well add the
> >     command to the &&-chain. That's our normal style, so readers don't
> >     have to wonder if it's important or not. Plus it would help avoid a
> >     broken chain if more commands are added at the beginning of the
> >     function.
> 
> I made the change for basically these reasons, but mostly to bring this
> function into good style as with the rest of our test suite (there are a
> handful of other minor nits that we could look at, such as some odd
> spacing, etc.).
> 
> Whether or not all of this needs to go into the commit message... I
> don't know. On the one hand, I think that your explanation here is
> clearer than what I wrote in the commit message, but on the other hand,
> I think that amending it again may be belaboring an otherwise simple
> change.
> 
> If you feel strongly, though, I'm happy to send a revised patch.

I agree it's a pretty trivial patch, but I think if it's worth applying
at all, then it's worth justifying it appropriately.

-Peff

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 3/3] commit-graph: respect 'core.useBloomFilters'
  2020-06-30 19:18   ` Jeff King
@ 2020-06-30 19:27     ` Taylor Blau
  2020-06-30 19:33       ` Jeff King
  0 siblings, 1 reply; 16+ messages in thread
From: Taylor Blau @ 2020-06-30 19:27 UTC (permalink / raw)
  To: Jeff King; +Cc: Taylor Blau, git, dstolee

On Tue, Jun 30, 2020 at 03:18:34PM -0400, Jeff King wrote:
> On Tue, Jun 30, 2020 at 01:17:48PM -0400, Taylor Blau wrote:
>
> > Git uses the 'core.commitGraph' configuration value to control whether
> > or not the commit graph is used when parsing commits or performing a
> > traversal.
>
> I think this is a good thing to have, and the patch itself makes sense
> to me (this is actually my first time reviewing it, despite its intended
> use within GitHub :) ).
>
> If I may bikeshed for a moment:
>
> > Introduce 'core.useBloomFilters' to control whether or not Bloom filters
> > are read. Note that this configuration is independent from both:
> >
> >   - 'core.commitGraph', to allow flexibility in using all parts of a
> >     commit-graph _except_ for its Bloom filters.
> >
> >   - The '--changed-paths' option for 'git commit-graph write', to allow
> >     reading and writing Bloom filters to be controlled independently.
>
> Should we avoid exposing the user to the words "Bloom filter"?
>
> The command-line option for writing them was genericized to
> "changed-paths", which I think is good. The use of Bloom filters is an
> implementation detail. What the user cares about is whether we can
> optimize queries of which paths changed in a commit.
>
> When we introduced reachability bitmaps long ago, we made the mistake of
> just calling them "bitmaps". That jargon is well understood by people
> who work with that code, but it's confusing outside of that (even within
> other parts of Git) because bitmaps are just a generic data structure.
> You can have a bitmap of just about anything (and indeed we do use other
> bitmaps these days). Consistently calling them "reachability bitmaps",
> especially in the user facing bits, would have reduced confusion over
> the years.
>
> Similarly, Bloom filters are a generic structure we might use elsewhere.
> I don't really care if we use the word "Bloom" internally to refer to
> this feature, but we'll be stuck with this config option for all time. I
> think it's worth picking something more clear.

All good thoughts. I wondered about this, too, when writing the patch,
but ultimately decided to expose the name since this is the only usage
of Bloom filters within Git to date. Whether that will continue to be
true, I'm not sure, so it probably isn't a great idea to lock ourselves
into that decision within the 'core' namespace.

So, I'm certainly open to changing it, although I'm not sure that I'm as
worried about exposing the implementation detail as I am about squatting
on Bloom filters within Git in general. I don't think that this
configuration will end up getting used by folks other than server
administrators and for debugging purposes, so those populations are
already likely to be aware of changed-path Bloom filters beforehand.

But, hiding the implementation detail seems like sane advice either way.

> It might even be worth considering whether "changed paths" needs more
> context (or would if we add new features in the future). On a "git
> commit-graph write" command-line it is perfectly clear, but would
> core.commitGraphChangedPaths be worth it? It's definitely more specific,
> but it's also way more ugly. ;)

Here's a third option what about 'graph.readChangedPaths'. I think that
Stolee and I discussed a new top-level 'graph' section, since we now
have a few commit-graph-related configuration variables in 'core'.

That's a little shorter, and it adds the verb 'read', which is more
descriptive than 'use' (I touch on this in the third patch, where I say
that this configuration variable _doesn't_ affect the '--changed-path'
option when writing).

Either way, I'd love to hear your thoughts and others', too, to figure
out what we think the most agreeable configuration name is.

> > diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c
> > index 6d0c962438..5f585a1725 100644
> > --- a/t/helper/test-read-graph.c
> > +++ b/t/helper/test-read-graph.c
> > @@ -12,11 +12,12 @@ int cmd__read_graph(int argc, const char **argv)
> >  	setup_git_directory();
> >  	odb = the_repository->objects->odb;
> >
> > +	prepare_repo_settings(the_repository);
> > +
> >  	graph = read_commit_graph_one(the_repository, odb);
>
> I wondered why we would need this prepare_repo_settings() now, when it
> should have been needed already to cover core.commitGraph already. I
> strongly suspect the answer is: "test-tool read-graph" never properly
> respected core.commitGraph in the first place.

Yep. Could probably be broken out into a separate patch (or mentioned as
an aside in this one), but you're right: this helper did not respect
any configuration that 'prepare_repo_settings' picks up.

> And now presumably it would. If true, I don't think any tests need
> adjusted because the only places we set it are:
>
>   - on a "git -c" command line, which wouldn't run a test-tool helper
>
>   - when we do set it, it is always to "true", which is the default
>     anyway
>
> >  	if (!graph)
> >  		return 1;
> >
> > -
> >  	printf("header: %08x %d %d %d %d\n",
> >  		ntohl(*(uint32_t*)graph->data),
> >  		*(unsigned char*)(graph->data + 4),
>
> Oh good, I happened to be looking at this code earlier today for an
> unrelated reason and was bothered by this extra newline. :)

I hoped that nobody would mine me sneaking this in ;-).

>
> -Peff
Thanks,
Taylor

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 3/3] commit-graph: respect 'core.useBloomFilters'
  2020-06-30 19:27     ` Taylor Blau
@ 2020-06-30 19:33       ` Jeff King
  0 siblings, 0 replies; 16+ messages in thread
From: Jeff King @ 2020-06-30 19:33 UTC (permalink / raw)
  To: Taylor Blau; +Cc: git, dstolee

On Tue, Jun 30, 2020 at 03:27:18PM -0400, Taylor Blau wrote:

> So, I'm certainly open to changing it, although I'm not sure that I'm as
> worried about exposing the implementation detail as I am about squatting
> on Bloom filters within Git in general. I don't think that this
> configuration will end up getting used by folks other than server
> administrators and for debugging purposes, so those populations are
> already likely to be aware of changed-path Bloom filters beforehand.

Yeah, the squatting thing is definitely my bigger concern (having been
through the "bitmaps" version of the same thing).

> > It might even be worth considering whether "changed paths" needs more
> > context (or would if we add new features in the future). On a "git
> > commit-graph write" command-line it is perfectly clear, but would
> > core.commitGraphChangedPaths be worth it? It's definitely more specific,
> > but it's also way more ugly. ;)
> 
> Here's a third option what about 'graph.readChangedPaths'. I think that
> Stolee and I discussed a new top-level 'graph' section, since we now
> have a few commit-graph-related configuration variables in 'core'.

Yes, I like that even better. Probably "graph" is sufficiently specific
within Git's context, though I guess it _could_ bring to mind "git log
--graph". So many overloaded terms. :)

> That's a little shorter, and it adds the verb 'read', which is more
> descriptive than 'use' (I touch on this in the third patch, where I say
> that this configuration variable _doesn't_ affect the '--changed-path'
> option when writing).

Yeah, saying "read" specifically is much nicer.

> > > +	prepare_repo_settings(the_repository);
> > > +
> > >  	graph = read_commit_graph_one(the_repository, odb);
> >
> > I wondered why we would need this prepare_repo_settings() now, when it
> > should have been needed already to cover core.commitGraph already. I
> > strongly suspect the answer is: "test-tool read-graph" never properly
> > respected core.commitGraph in the first place.
> 
> Yep. Could probably be broken out into a separate patch (or mentioned as
> an aside in this one), but you're right: this helper did not respect
> any configuration that 'prepare_repo_settings' picks up.

I'd probably just note it in the commit message, but I'd be fine with
that or with a separate patch.

-Peff

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 2/3] t4216: fix broken '&&'-chain
  2020-06-30 19:03       ` Jeff King
  2020-06-30 19:12         ` Taylor Blau
@ 2020-06-30 19:48         ` Eric Sunshine
  1 sibling, 0 replies; 16+ messages in thread
From: Eric Sunshine @ 2020-06-30 19:48 UTC (permalink / raw)
  To: Jeff King; +Cc: Taylor Blau, Git List, Derrick Stolee

On Tue, Jun 30, 2020 at 3:03 PM Jeff King <peff@peff.net> wrote:
> [...] what are we improving, and why?
>
> The original code handled the fact that the file might not exist by not
> including its exit code in the &&-chain which leads to the function's
> return value. Your new code does so by putting it in the &&-chain but
> asking "rm" to ignore errors. Is one better than the other?
>
> I think so, but my argument would be more along the lines of:
>
>   - without "-f", "rm" will complain about a missing file, which is
>     distracting noise in the test log

Indeed, a nice detail when reading verbose test output; one less thing
to distract the attention from the real/important problems.

>   - once "-f" is added in to suppress that, we might as well add the
>     command to the &&-chain. That's our normal style, so readers don't
>     have to wonder if it's important or not. Plus it would help avoid a
>     broken chain if more commands are added at the beginning of the
>     function.

The bit about commands possibly being added at the beginning of the
function probably deserves its own bullet point. I often (relatively
speaking) cite that reason when asking people to &&-chain variable
assignments at the beginning of a function.

    func () {
        a=1 &&
        b=2 &&
        ...
    }

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places
  2020-06-30 17:17 ` [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places Taylor Blau
@ 2020-06-30 20:52   ` Derrick Stolee
  0 siblings, 0 replies; 16+ messages in thread
From: Derrick Stolee @ 2020-06-30 20:52 UTC (permalink / raw)
  To: Taylor Blau, git; +Cc: peff, dstolee

On 6/30/2020 1:17 PM, Taylor Blau wrote:
> In a future commit, some commit-graph internals will want access to
> 'r->settings', but we only have the 'struct object_directory *'
> corresponding to that repository.

It is good to use "struct repository *" more.

> Add an additional parameter to pass the repository around in more
> places. In the next patch, we will remove the object directory (and
> instead reference it with 'r->odb').

And this is a good reason why we need the repository here: we will
need the settings AND odb.

> diff --git a/commit-graph.h b/commit-graph.h
> index 3ba0da1e5f..03d848e168 100644
> --- a/commit-graph.h
> +++ b/commit-graph.h
> @@ -76,10 +76,12 @@ struct commit_graph {
>  };
>  
>  struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
> +						 struct repository *r,
>  						 struct object_directory *odb);

I suppose my only nit is that the struct repository pointer is
not always the first parameter. I understand that you have grouped
it where the 'odb' parameter is here, so perhaps that is fine.

Feel free to ignore this nit.

Thanks,
-Stolee

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters'
  2020-06-30 17:17 [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
                   ` (2 preceding siblings ...)
  2020-06-30 17:17 ` [PATCH 3/3] commit-graph: respect 'core.useBloomFilters' Taylor Blau
@ 2020-08-03 19:02 ` Taylor Blau
  3 siblings, 0 replies; 16+ messages in thread
From: Taylor Blau @ 2020-08-03 19:02 UTC (permalink / raw)
  To: Taylor Blau; +Cc: git, peff, dstolee

On Tue, Jun 30, 2020 at 01:17:36PM -0400, Taylor Blau wrote:
> Hi,
>
> Here are some patches that we have been using at GitHub to control
> whether or not Bloom filters stored in commit-graphs are read during
> normal operation.

I took the suggestions raised here and incorporated them into a
much-larger series that contains updated versions of these patches here:

  https://lore.kernel.org/git/20200803185947.GA67482@syl.lan/

This thread should be discarded, and future discussion redirected above.

Thanks.

>
> -Taylor
>
> Taylor Blau (3):
>   commit-graph: pass a 'struct repository *' in more places
>   t4216: fix broken '&&'-chain
>   commit-graph: respect 'core.useBloomFilters'
>
>  Documentation/config/core.txt |  5 +++++
>  builtin/commit-graph.c        |  2 +-
>  commit-graph.c                | 17 ++++++++++-------
>  commit-graph.h                |  4 +++-
>  fuzz-commit-graph.c           |  5 +++--
>  repo-settings.c               |  3 +++
>  repository.h                  |  1 +
>  t/helper/test-read-graph.c    |  3 ++-
>  t/t4216-log-bloom.sh          |  6 ++++--
>  9 files changed, 32 insertions(+), 14 deletions(-)
>
> --
> 2.27.0.224.g4cfa086e50

Thanks,
Taylor

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 17:17 [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau
2020-06-30 17:17 ` [PATCH 1/3] commit-graph: pass a 'struct repository *' in more places Taylor Blau
2020-06-30 20:52   ` Derrick Stolee
2020-06-30 17:17 ` [PATCH 2/3] t4216: fix broken '&&'-chain Taylor Blau
2020-06-30 17:50   ` Eric Sunshine
2020-06-30 18:39     ` Taylor Blau
2020-06-30 19:03       ` Jeff King
2020-06-30 19:12         ` Taylor Blau
2020-06-30 19:19           ` Jeff King
2020-06-30 19:48         ` Eric Sunshine
2020-06-30 18:55     ` Jeff King
2020-06-30 17:17 ` [PATCH 3/3] commit-graph: respect 'core.useBloomFilters' Taylor Blau
2020-06-30 19:18   ` Jeff King
2020-06-30 19:27     ` Taylor Blau
2020-06-30 19:33       ` Jeff King
2020-08-03 19:02 ` [PATCH 0/3] commit-graph: introduce 'core.useBloomFilters' Taylor Blau

Git Mailing List Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/git/0 git/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 git git/ https://lore.kernel.org/git \
		git@vger.kernel.org
	public-inbox-index git

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.git


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git