imx.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
* [PATCH v8 0/5] add imx8dxl evk support
@ 2022-09-14 13:58 Shenwei Wang
  2022-09-14 13:58 ` [PATCH v8 1/5] dt-bindings: firmware: add missing resource IDs for imx8dxl Shenwei Wang
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Shenwei Wang @ 2022-09-14 13:58 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer
  Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
	Marcel Ziswiler, Marek Vasut, Alexander Stein, Max Krummenacher,
	Matthias Schiffer, Denys Drozdov, Tim Harvey, Alex Marginean,
	Reinhold Mueller, Shenwei Wang, Viorel Suman, Abel Vesa,
	Zhou Peng, Shijie Qin, Ming Qian, Peng Fan, Li Yang, devicetree,
	linux-kernel, imx

i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.

The series of patches is to add the imx8dxl soc and its evk board
support.

changes in V8:
  - change the flag of gpio phandle in reg_fec1_sel node to
    GPIO_ACTIVE_LOW to match the hardware behavior.

changes in V7:
  - move the fec1 reset gpio into its phy node

changes in V6:
  - The V6 changes mainly respond to the comments from Shawn
  - Separate the V5 patch into SoC and Board commits
  - Remove the unnecessary properties of "max-frequency"
    in usdhc2 node
  - Remove the unnecessary properties of "clk_csr" in eqos node
  - Fix several coding style problems

changes in V5:
  - change the "scu" node name to "system-controller"
  - fix the typo in the comments for imx8dxl evk board

changes in V4:
  - move i2c/mmc/serial aliases from soc to board
  - correct the node names to follow the generic names recommendation
  - remove some unused nodes in the evk board dts

changes in V3:
  - re-order the commit sequence according to Krzysztof's feedback
  - correct the syntax and styple problems pointed by Krzysztof
    (Thank you for the detailed review, Krzysztof!)
  - remove the unused nodes in imx8dxl-evk.dts
  - dt_binding_check passed

Changes in V2:
  - removed the edma2 device node because the edma v3 driver hasn't been
    upstreamed yet.
  - removed the imx8dxl_cm4 alias to fix the compile error.
  - removed the extra blank lines at EOF.
  - dt_binding_check passed.

Shenwei Wang (5):
  dt-bindings: firmware: add missing resource IDs for imx8dxl
  dt-bindings: arm: imx: update fsl.yaml for imx8dxl
  arm64: dts: imx8: add a node label to ddr-pmu
  arm64: dts: freescale: add i.MX8DXL SoC support
  arm64: dts: freescale: add support for i.MX8DXL EVK board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |   2 +-
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 426 ++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   |  52 +++
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 142 ++++++
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    |   9 +
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  74 +++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi    | 238 ++++++++++
 include/dt-bindings/firmware/imx/rsrc.h       |   7 +
 10 files changed, 956 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

--
2.25.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2022-09-15 12:04 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-14 13:58 [PATCH v8 0/5] add imx8dxl evk support Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 1/5] dt-bindings: firmware: add missing resource IDs for imx8dxl Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 2/5] dt-bindings: arm: imx: update fsl.yaml " Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 3/5] arm64: dts: imx8: add a node label to ddr-pmu Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 4/5] arm64: dts: freescale: add i.MX8DXL SoC support Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 5/5] arm64: dts: freescale: add support for i.MX8DXL EVK board Shenwei Wang
2022-09-15 12:04 ` [PATCH v8 0/5] add imx8dxl evk support Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).