Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: linux-pwm@vger.kernel.org,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	linux-acpi@vger.kernel.org, dri-devel@lists.freedesktop.org,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Mika Westerberg" <mika.westerberg@linux.intel.com>,
	"Len Brown" <lenb@kernel.org>
Subject: Re: [Intel-gfx] [PATCH v5 07/16] pwm: crc: Fix period / duty_cycle times being off by a factor of 256
Date: Wed, 29 Jul 2020 11:13:51 +0300
Message-ID: <20200729081351.GI3703480@smile.fi.intel.com> (raw)
In-Reply-To: <20200717133753.127282-8-hdegoede@redhat.com>

On Fri, Jul 17, 2020 at 03:37:44PM +0200, Hans de Goede wrote:
> While looking into adding atomic-pwm support to the pwm-crc driver I
> noticed something odd, there is a PWM_BASE_CLK define of 6 MHz and
> there is a clock-divider which divides this with a value between 1-128,
> and there are 256 duty-cycle steps.
> 
> The pwm-crc code before this commit assumed that a clock-divider
> setting of 1 means that the PWM output is running at 6 MHZ, if that
> is true, where do these 256 duty-cycle steps come from?
> 
> This would require an internal frequency of 256 * 6 MHz = 1.5 GHz, that
> seems unlikely for a PMIC which is using a silicon process optimized for
> power-switching transistors. It is way more likely that there is an 8
> bit counter for the duty cycle which acts as an extra fixed divider
> wrt the PWM output frequency.
> 
> The main user of the pwm-crc driver is the i915 GPU driver which uses it
> for backlight control. Lets compare the PWM register values set by the
> video-BIOS (the GOP), assuming the extra fixed divider is present versus
> the PWM frequency specified in the Video-BIOS-Tables:
> 
> Device:		PWM Hz set by BIOS	PWM Hz specified in VBT
> Asus T100TA 	200			200
> Asus T100HA 	200			200
> Lenovo Miix 2 8	23437			20000
> Toshiba WT8-A	23437			20000
> 
> So as we can see if we assume the extra division by 256 then the register
> values set by the GOP are an exact match for the VBT values, where as
> otherwise the values would be of by a factor of 256.
> 
> This commit fixes the period / duty_cycle calculations to take the
> extra division by 256 into account.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v3:
> - Use NSEC_PER_USEC instead of adding a new (non-sensical) NSEC_PER_MHZ define
> ---
>  drivers/pwm/pwm-crc.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> index 272eeb071147..c056eb9b858c 100644
> --- a/drivers/pwm/pwm-crc.c
> +++ b/drivers/pwm/pwm-crc.c
> @@ -21,8 +21,8 @@
>  
>  #define PWM_MAX_LEVEL		0xFF
>  
> -#define PWM_BASE_CLK		6000000  /* 6 MHz */
> -#define PWM_MAX_PERIOD_NS	21333    /* 46.875KHz */
> +#define PWM_BASE_CLK_MHZ	6	/* 6 MHz */
> +#define PWM_MAX_PERIOD_NS	5461333	/* 183 Hz */
>  
>  /**
>   * struct crystalcove_pwm - Crystal Cove PWM controller
> @@ -72,7 +72,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
>  
>  		/* changing the clk divisor, need to disable fisrt */
>  		crc_pwm_disable(c, pwm);
> -		clk_div = PWM_BASE_CLK * period_ns / NSEC_PER_SEC;
> +		clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
>  
>  		regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
>  					clk_div | PWM_OUTPUT_ENABLE);
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply index

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:37 [Intel-gfx] [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 01/16] ACPI / LPSS: Resume Cherry Trail PWM controller in no-irq phase Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 02/16] ACPI / LPSS: Save Cherry Trail PWM ctx registers only once (at activation) Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 03/16] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare() Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 04/16] pwm: lpss: Add range limit check for the base_unit register value Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 05/16] pwm: lpss: Add pwm_lpss_prepare_enable() helper Hans de Goede
2020-07-28 18:45   ` Andy Shevchenko
2020-07-28 19:49     ` Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 06/16] pwm: lpss: Use pwm_lpss_apply() when restoring state on resume Hans de Goede
2020-07-28 18:57   ` Andy Shevchenko
2020-07-28 19:55     ` Hans de Goede
2020-07-29  8:12       ` Andy Shevchenko
2020-08-02 20:51         ` Hans de Goede
2020-08-03  8:41           ` Andy Shevchenko
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 07/16] pwm: crc: Fix period / duty_cycle times being off by a factor of 256 Hans de Goede
2020-07-28 19:36   ` Andy Shevchenko
2020-07-28 20:00     ` Hans de Goede
2020-07-29  8:13   ` Andy Shevchenko [this message]
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 08/16] pwm: crc: Fix off-by-one error in the clock-divider calculations Hans de Goede
2020-07-29 10:28   ` Andy Shevchenko
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 09/16] pwm: crc: Fix period changes not having any effect Hans de Goede
2020-07-29 10:30   ` Andy Shevchenko
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 10/16] pwm: crc: Enable/disable PWM output on enable/disable Hans de Goede
2020-07-29 10:32   ` Andy Shevchenko
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 11/16] pwm: crc: Implement apply() method to support the new atomic PWM API Hans de Goede
2020-07-29 10:51   ` Andy Shevchenko
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 12/16] pwm: crc: Implement get_state() method Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 13/16] drm/i915: panel: Add get_vbt_pwm_freq() helper Hans de Goede
2020-07-17 13:37 ` [Intel-gfx] [PATCH v5 14/16] drm/i915: panel: Honor the VBT PWM frequency for devs with an external PWM controller Hans de Goede
2020-07-17 13:44 ` [Intel-gfx] [PATCH v5 15/16] drm/i915: panel: Honor the VBT PWM min setting " Hans de Goede
2020-07-17 13:44   ` [Intel-gfx] [PATCH v5 16/16] drm/i915: panel: Use atomic PWM API " Hans de Goede
2020-07-27  7:41 ` [Intel-gfx] [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Thierry Reding
2020-07-29  8:23   ` Andy Shevchenko
2020-07-29  9:32     ` Hans de Goede
2020-07-30  9:26       ` Thierry Reding
2020-08-01 14:33         ` Hans de Goede
2020-07-29 10:54 ` Andy Shevchenko
2020-08-01 14:38   ` Hans de Goede
2020-08-02 11:25     ` Andy Shevchenko
2020-08-02 19:43       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729081351.GI3703480@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git