[Intel-gfx] [RFC 0/5] drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Intel-gfx] [RFC 0/5] drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Lyude Paul]

This series:
* Cleans up i915's DPCD backlight code a little bit
* Extracts i915's DPCD backlight code into a set of shared DRM helpers
* Starts using those helpers in nouveau to add support to nouveau for
  DPCD backlight control

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com

Lyude Paul (5):
  drm/nouveau/kms/nv40-/backlight: Assign prop type once
  drm/nouveau/kms: Don't probe eDP connectors more then once
  drm/i915/dp: Remove redundant AUX backlight frequency calculations
  drm/dp: Extract i915's eDP backlight code into DRM helpers
  drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau

 drivers/gpu/drm/drm_dp_helper.c               | 332 ++++++++++++++++++
 .../drm/i915/display/intel_display_types.h    |   4 +-
 .../drm/i915/display/intel_dp_aux_backlight.c | 332 ++----------------
 drivers/gpu/drm/nouveau/dispnv50/disp.c       |  30 +-
 drivers/gpu/drm/nouveau/nouveau_backlight.c   | 170 +++++++--
 drivers/gpu/drm/nouveau/nouveau_connector.c   |   6 +
 drivers/gpu/drm/nouveau/nouveau_connector.h   |   9 +-
 drivers/gpu/drm/nouveau/nouveau_encoder.h     |   1 +
 include/drm/drm_dp_helper.h                   |  48 +++
 9 files changed, 613 insertions(+), 319 deletions(-)

-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [RFC 1/5] drm/nouveau/kms/nv40-/backlight: Assign prop type once

[Lyude Paul]

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
---
 drivers/gpu/drm/nouveau/nouveau_backlight.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index c7a94c94dbf3..4acc5be5e9aa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -106,7 +106,6 @@ nv40_backlight_init(struct nouveau_encoder *encoder,
 	if (!(nvif_rd32(device, NV40_PMC_BACKLIGHT) & NV40_PMC_BACKLIGHT_MASK))
 		return -ENODEV;
 
-	props->type = BACKLIGHT_RAW;
 	props->max_brightness = 31;
 	*ops = &nv40_bl_ops;
 	return 0;
@@ -212,7 +211,6 @@ nv50_backlight_init(struct nouveau_encoder *nv_encoder,
 	else
 		*ops = &nva3_bl_ops;
 
-	props->type = BACKLIGHT_RAW;
 	props->max_brightness = 100;
 
 	return 0;
@@ -226,7 +224,7 @@ nouveau_backlight_init(struct drm_connector *connector)
 	struct nouveau_encoder *nv_encoder = NULL;
 	struct nvif_device *device = &drm->client.device;
 	char backlight_name[BL_NAME_SIZE];
-	struct backlight_properties props = {0};
+	struct backlight_properties props = { .type = BACKLIGHT_RAW, 0 };
 	const struct backlight_ops *ops;
 	int ret;
 
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [RFC 2/5] drm/nouveau/kms: Don't probe eDP connectors more then once

[Lyude Paul]

eDP doesn't do hotplugging, so there's no reason for us to reprobe it (unless a
connection status change is being forced, of course).

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 8b4b3688c7ae..398fee9b7ae9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -554,6 +554,12 @@ nouveau_connector_detect(struct drm_connector *connector, bool force)
 	int ret;
 	enum drm_connector_status conn_status = connector_status_disconnected;
 
+	/* eDP doesn't do hotplugging, never probe more then once */
+	if (nv_connector->type == DCB_CONNECTOR_eDP &&
+	    connector->force == DRM_FORCE_UNSPECIFIED &&
+	    connector->status != connector_status_unknown)
+		return connector->status;
+
 	/* Outputs are only polled while runtime active, so resuming the
 	 * device here is unnecessary (and would deadlock upon runtime suspend
 	 * because it waits for polling to finish). We do however, want to
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [RFC 3/5] drm/i915/dp: Remove redundant AUX backlight frequency calculations

[Lyude Paul]

Noticed this while moving all of the VESA backlight code in i915 over to
DRM helpers: it would appear that we calculate the frequency value we want
to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never
actually changes during runtime. So, let's simplify things by just caching
this value in intel_panel.backlight, and re-writing it as-needed.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
---
 .../drm/i915/display/intel_display_types.h    |  1 +
 .../drm/i915/display/intel_dp_aux_backlight.c | 64 ++++++-------------
 2 files changed, 19 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 5bc5bfbc4551..133c9cb742a7 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -259,6 +259,7 @@ struct intel_panel {
 
 		/* DPCD backlight */
 		u8 pwmgen_bit_count;
+		u8 pwm_freq_pre_divider;
 
 		struct backlight_device *device;
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index 4fd536801b14..94ce5ca1affa 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -129,50 +129,6 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
 	}
 }
 
-/*
- * Set PWM Frequency divider to match desired frequency in vbt.
- * The PWM Frequency is calculated as 27Mhz / (F x P).
- * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
- *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
- * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
- *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
- */
-static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
-{
-	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	const u8 pn = connector->panel.backlight.pwmgen_bit_count;
-	int freq, fxp, f, fxp_actual, fxp_min, fxp_max;
-
-	freq = dev_priv->vbt.backlight.pwm_freq_hz;
-	if (!freq) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Use panel default backlight frequency\n");
-		return false;
-	}
-
-	fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
-	f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
-	fxp_actual = f << pn;
-
-	/* Ensure frequency is within 25% of desired value */
-	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
-	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
-
-	if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
-		drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
-		return false;
-	}
-
-	if (drm_dp_dpcd_writeb(&intel_dp->aux,
-			       DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Failed to write aux backlight freq\n");
-		return false;
-	}
-	return true;
-}
-
 static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
 					  const struct drm_connector_state *conn_state)
 {
@@ -213,9 +169,13 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 		break;
 	}
 
-	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
-		if (intel_dp_aux_set_pwm_freq(connector))
+	if (panel->backlight.pwm_freq_pre_divider) {
+		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
+				       panel->backlight.pwm_freq_pre_divider) == 1)
 			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
+		else
+			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
+	}
 
 	if (new_dpcd_buf != dpcd_buf) {
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
@@ -236,6 +196,14 @@ static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old
 				 false);
 }
 
+/*
+ * Compute PWM frequency divider value based off the frequency provided to us by the vbt.
+ * The PWM Frequency is calculated as 27Mhz / (F x P).
+ * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
+ *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
+ * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
+ *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
+ */
 static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 {
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
@@ -287,8 +255,10 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
 	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
 
+	/* Ensure frequency is within 25% of desired value */
 	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
 	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
+
 	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
 		drm_dbg_kms(&i915->drm,
 			    "VBT defined backlight frequency out of range\n");
@@ -309,7 +279,9 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 			    "Failed to write aux pwmgen bit count\n");
 		return max_backlight;
 	}
+
 	panel->backlight.pwmgen_bit_count = pn;
+	panel->backlight.pwm_freq_pre_divider = f;
 
 	max_backlight = (1 << pn) - 1;
 
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [RFC 3/5] drm/i915/dp: Remove redundant AUX backlight frequency calculations

[Jani Nikula]

On Wed, 09 Dec 2020, Lyude Paul <lyude@redhat.com> wrote:
> Noticed this while moving all of the VESA backlight code in i915 over to
> DRM helpers: it would appear that we calculate the frequency value we want
> to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never
> actually changes during runtime. So, let's simplify things by just caching
> this value in intel_panel.backlight, and re-writing it as-needed.

This isn't a full review, just something I spotted so far. Please see
inline.

BR,
Jani.


>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Dave Airlie <airlied@gmail.com>
> Cc: greg.depoire@gmail.com
> ---
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  .../drm/i915/display/intel_dp_aux_backlight.c | 64 ++++++-------------
>  2 files changed, 19 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 5bc5bfbc4551..133c9cb742a7 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -259,6 +259,7 @@ struct intel_panel {
>  
>  		/* DPCD backlight */
>  		u8 pwmgen_bit_count;
> +		u8 pwm_freq_pre_divider;
>  
>  		struct backlight_device *device;
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index 4fd536801b14..94ce5ca1affa 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -129,50 +129,6 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
>  	}
>  }
>  
> -/*
> - * Set PWM Frequency divider to match desired frequency in vbt.
> - * The PWM Frequency is calculated as 27Mhz / (F x P).
> - * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
> - *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> - * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
> - *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> - */
> -static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
> -{
> -	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	const u8 pn = connector->panel.backlight.pwmgen_bit_count;
> -	int freq, fxp, f, fxp_actual, fxp_min, fxp_max;
> -
> -	freq = dev_priv->vbt.backlight.pwm_freq_hz;
> -	if (!freq) {
> -		drm_dbg_kms(&dev_priv->drm,
> -			    "Use panel default backlight frequency\n");
> -		return false;
> -	}
> -
> -	fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
> -	f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> -	fxp_actual = f << pn;
> -
> -	/* Ensure frequency is within 25% of desired value */
> -	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> -	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> -
> -	if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
> -		drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
> -		return false;
> -	}
> -
> -	if (drm_dp_dpcd_writeb(&intel_dp->aux,
> -			       DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
> -		drm_dbg_kms(&dev_priv->drm,
> -			    "Failed to write aux backlight freq\n");
> -		return false;
> -	}
> -	return true;
> -}
> -
>  static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
>  					  const struct drm_connector_state *conn_state)
>  {
> @@ -213,9 +169,13 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
>  		break;
>  	}
>  
> -	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
> -		if (intel_dp_aux_set_pwm_freq(connector))
> +	if (panel->backlight.pwm_freq_pre_divider) {
> +		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
> +				       panel->backlight.pwm_freq_pre_divider) == 1)
>  			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> +		else
> +			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
> +	}
>  
>  	if (new_dpcd_buf != dpcd_buf) {
>  		if (drm_dp_dpcd_writeb(&intel_dp->aux,
> @@ -236,6 +196,14 @@ static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old
>  				 false);
>  }
>  
> +/*
> + * Compute PWM frequency divider value based off the frequency provided to us by the vbt.
> + * The PWM Frequency is calculated as 27Mhz / (F x P).
> + * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
> + *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> + * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
> + *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> + */
>  static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
>  {
>  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> @@ -287,8 +255,10 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
>  	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
>  	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
>  
> +	/* Ensure frequency is within 25% of desired value */
>  	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
>  	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> +
>  	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
>  		drm_dbg_kms(&i915->drm,
>  			    "VBT defined backlight frequency out of range\n");
> @@ -309,7 +279,9 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
>  			    "Failed to write aux pwmgen bit count\n");
>  		return max_backlight;
>  	}
> +
>  	panel->backlight.pwmgen_bit_count = pn;
> +	panel->backlight.pwm_freq_pre_divider = f;

This should be wrapped in

	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)

but you do it in the next patch, so this patch is a bit broken.


>  
>  	max_backlight = (1 << pn) - 1;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [RFC 4/5] drm/dp: Extract i915's eDP backlight code into DRM helpers

[Lyude Paul]

Since we're about to implement eDP backlight support in nouveau using the
standard protocol from VESA, we might as well just take the code that's
already written for this and move it into a set of shared DRM helpers.

Note that these helpers are intended to handle DPCD related backlight
control bits such as setting the brightness level over AUX, probing the
backlight's TCON, enabling/disabling the backlight over AUX if supported,
etc. Any PWM-related portions of backlight control are explicitly left up
to the driver, as these will vary from platform to platform.

The only exception to this is the calculation of the PWM frequency
pre-divider value. This is because the only platform-specific information
required for this is the PWM frequency of the panel, which the driver is
expected to provide if available. The actual algorithm for calculating this
value is standard and is defined in the eDP specification from VESA.

Note that these helpers do not yet implement the full range of features
the VESA backlight interface provides, and only provide the following
functionality (all of which was already present in i915's DPCD backlight
support):

* Basic control of brightness levels
* Basic probing of backlight capabilities
* Helpers for enabling and disabling the backlight

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
---
 drivers/gpu/drm/drm_dp_helper.c               | 332 ++++++++++++++++++
 .../drm/i915/display/intel_display_types.h    |   5 +-
 .../drm/i915/display/intel_dp_aux_backlight.c | 304 ++--------------
 include/drm/drm_dp_helper.h                   |  48 +++
 4 files changed, 419 insertions(+), 270 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 5bd0934004e3..06fdddf44e54 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -2596,3 +2596,335 @@ void drm_dp_vsc_sdp_log(const char *level, struct device *dev,
 #undef DP_SDP_LOG
 }
 EXPORT_SYMBOL(drm_dp_vsc_sdp_log);
+
+/**
+ * drm_edp_backlight_set_level() - Set the backlight level of an eDP panel via AUX
+ * @aux: The DP AUX channel to use
+ * @bl: Backlight capability info from drm_edp_backlight_init()
+ * @level: The brightness level to set
+ *
+ * Sets the brightness level of an eDP panel's backlight. Note that the panel's backlight must
+ * already have been enabled by the driver by calling drm_edp_backlight_enable().
+ *
+ * Returns: %0 on success, negative error code on failure
+ */
+int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+				u16 level)
+{
+	int ret;
+	u8 buf[2] = { 0 };
+
+	if (bl->lsb_reg_used) {
+		buf[0] = (level & 0xFF00) >> 8;
+		buf[1] = (level & 0x00FF);
+	} else {
+		buf[0] = level;
+	}
+
+	ret = drm_dp_dpcd_write(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, sizeof(buf));
+	if (ret != sizeof(buf)) {
+		DRM_ERROR("%s: Failed to write aux backlight level: %d\n", aux->name, ret);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_edp_backlight_set_level);
+
+static int
+drm_edp_backlight_set_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+			     bool enable)
+{
+	int ret;
+	u8 buf;
+
+	/* The panel uses something other then DPCD for enabling it's backlight */
+	if (!bl->aux_enable)
+		return 0;
+
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &buf);
+	if (ret != 1) {
+		DRM_ERROR("%s: Failed to read eDP display control register: %d\n", aux->name, ret);
+		return ret < 0 ? ret : -EIO;
+	}
+	if (enable)
+		buf |= DP_EDP_BACKLIGHT_ENABLE;
+	else
+		buf &= ~DP_EDP_BACKLIGHT_ENABLE;
+
+	ret = drm_dp_dpcd_writeb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, buf);
+	if (ret != 1) {
+		DRM_ERROR("%s: Failed to write eDP display control register: %d\n", aux->name, ret);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * drm_edp_backlight_enable() - Enable an eDP panel's backlight using DPCD
+ * @aux: The DP AUX channel to use
+ * @bl: Backlight capability info from drm_edp_backlight_init()
+ * @level: The initial backlight level to set via AUX, if there is one
+ *
+ * This function handles enabling DPCD backlight controls on a panel over DPCD, while additionally
+ * restoring any important backlight state such as the given backlight level, the brightness byte
+ * count, backlight frequency, etc.
+ *
+ * Note that certain panels, while supporting brightness level controls over DPCD, may not support
+ * having their backlights enabled via the standard %DP_EDP_DISPLAY_CONTROL_REGISTER. On such panels
+ * &drm_edp_backlight_info.aux_enable will be set to %false, this function will skip the step of
+ * programming the %DP_EDP_DISPLAY_CONTROL_REGISTER, and the driver must perform the required
+ * implementation specific step for enabling the backlight after calling this function.
+ *
+ * Returns: %0 on success, negative error code on failure.
+ */
+int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+			     const u16 level)
+{
+	int ret;
+	u8 dpcd_buf, new_dpcd_buf;
+
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n", aux->name, ret);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	new_dpcd_buf = dpcd_buf;
+
+	if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) != DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
+		new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
+		new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
+
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count);
+		if (ret != 1)
+			DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count: %d\n",
+				      aux->name, ret);
+	}
+
+	if (bl->pwm_freq_pre_divider) {
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_FREQ_SET, bl->pwm_freq_pre_divider);
+		if (ret != 1)
+			DRM_DEBUG_KMS("%s: Failed to write aux backlight frequency: %d\n",
+				      aux->name, ret);
+		else
+			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
+	}
+
+	if (new_dpcd_buf != dpcd_buf) {
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf);
+		if (ret != 1) {
+			DRM_DEBUG_KMS("%s: Failed to write aux backlight mode: %d\n",
+				      aux->name, ret);
+			return ret < 0 ? ret : -EIO;
+		}
+	}
+
+	ret = drm_edp_backlight_set_level(aux, bl, level);
+	if (ret < 0)
+		return ret;
+	ret = drm_edp_backlight_set_enable(aux, bl, true);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_edp_backlight_enable);
+
+/**
+ * drm_edp_backlight_disable() - Disable an eDP backlight using DPCD, if supported
+ * @aux: The DP AUX channel to use
+ * @bl: Backlight capability info from drm_edp_backlight_init()
+ *
+ * This function handles disabling DPCD backlight controls on a panel over AUX. Note that some
+ * panels have backlights that are enabled/disabled by other means, despite having their brightness
+ * values controlled through DPCD. On such panels &drm_edp_backlight_info.aux_enable will be set to
+ * %false, this function will become a no-op (and we will skip updating
+ * %DP_EDP_DISPLAY_CONTROL_REGISTER), and the driver must take care to perform it's own
+ * implementation specific step for disabling the backlight.
+ *
+ * Returns: %0 on success or no-op, negative error code on failure.
+ */
+int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl)
+{
+	int ret;
+
+	ret = drm_edp_backlight_set_enable(aux, bl, false);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_edp_backlight_disable);
+
+static inline int
+drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+			    u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
+{
+	int fxp, fxp_min, fxp_max, fxp_actual, f = 1;
+	int ret;
+	u8 pn, pn_min, pn_max;
+
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap: %d\n", aux->name, ret);
+		return -ENODEV;
+	}
+
+	pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
+	bl->max = (1 << pn) - 1;
+	if (!driver_pwm_freq_hz)
+		return 0;
+
+	/*
+	 * Set PWM Frequency divider to match desired frequency provided by the driver.
+	 * The PWM Frequency is calculated as 27Mhz / (F x P).
+	 * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
+	 *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
+	 * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
+	 *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
+	 */
+
+	/* Find desired value of (F x P)
+	 * Note that, if F x P is out of supported range, the maximum value or minimum value will
+	 * applied automatically. So no need to check that.
+	 */
+	fxp = DIV_ROUND_CLOSEST(1000 * DP_EDP_BACKLIGHT_FREQ_BASE_KHZ, driver_pwm_freq_hz);
+
+	/* Use highest possible value of Pn for more granularity of brightness adjustment while
+	 * satifying the conditions below.
+	 * - Pn is in the range of Pn_min and Pn_max
+	 * - F is in the range of 1 and 255
+	 * - FxP is within 25% of desired value.
+	 *   Note: 25% is arbitrary value and may need some tweak.
+	 */
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap min: %d\n", aux->name, ret);
+		return 0;
+	}
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap max: %d\n", aux->name, ret);
+		return 0;
+	}
+	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
+	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
+
+	/* Ensure frequency is within 25% of desired value */
+	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
+	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
+	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
+		DRM_DEBUG_KMS("%s: Driver defined backlight frequency (%d) out of range\n",
+			      aux->name, driver_pwm_freq_hz);
+		return 0;
+	}
+
+	for (pn = pn_max; pn >= pn_min; pn--) {
+		f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
+		fxp_actual = f << pn;
+		if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
+			break;
+	}
+
+	ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, pn);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count: %d\n", aux->name, ret);
+		return 0;
+	}
+	bl->pwmgen_bit_count = pn;
+	bl->max = (1 << pn) - 1;
+
+	if (edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) {
+		bl->pwm_freq_pre_divider = f;
+		DRM_DEBUG_KMS("%s: Using backlight frequency from driver (%dHz)\n",
+			      aux->name, driver_pwm_freq_hz);
+	}
+
+	return 0;
+}
+
+static inline int
+drm_edp_backlight_probe_level(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+			      u8 *current_mode)
+{
+	int ret;
+	u8 buf[2];
+	u8 mode_reg;
+
+	ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg);
+	if (ret != 1) {
+		DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n", aux->name, ret);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	*current_mode = (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK);
+	if (*current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
+		int size = 1 + bl->lsb_reg_used;
+
+		ret = drm_dp_dpcd_read(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, size);
+		if (ret != size) {
+			DRM_DEBUG_KMS("%s: Failed to read backlight level: %d\n", aux->name, ret);
+			return ret < 0 ? ret : -EIO;
+		}
+
+		if (bl->lsb_reg_used)
+			return (buf[0] << 8) | buf[1];
+		else
+			return buf[0];
+	}
+
+	/*
+	 * If we're not in DPCD control mode yet, the programmed brightness value is meaningless and
+	 * the driver should assume max brightness
+	 */
+	return bl->max;
+}
+
+/**
+ * drm_edp_backlight_init() - Probe a display panel's TCON using the standard VESA eDP backlight
+ * interface.
+ * @aux: The DP aux device to use for probing
+ * @bl: The &drm_edp_backlight_info struct to fill out with information on the backlight
+ * @driver_pwm_freq_hz: Optional PWM frequency from the driver in hz
+ * @edp_dpcd: A cached copy of the eDP DPCD
+ * @current_level: Where to store the probed brightness level
+ * @current_mode: Where to store the currently set backlight control mode
+ *
+ * Initializes a &drm_edp_backlight_info struct by probing @aux for it's backlight capabilities,
+ * along with also probing the current and maximum supported brightness levels.
+ *
+ * If @driver_pwm_freq_hz is non-zero, this will be used as the backlight frequency. Otherwise, the
+ * default frequency from the panel is used.
+ *
+ * Returns: %0 on success, negative error code on failure.
+ */
+int
+drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+		       u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
+		       u16 *current_level, u8 *current_mode)
+{
+	int ret;
+
+	if (edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
+		bl->aux_enable = true;
+	if (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
+		bl->lsb_reg_used = true;
+
+	ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz, edp_dpcd);
+	if (ret < 0)
+		return ret;
+
+	ret = drm_edp_backlight_probe_level(aux, bl, current_mode);
+	if (ret < 0)
+		return ret;
+	*current_level = ret;
+
+	DRM_DEBUG_KMS("%s: Found backlight level=%d/%d pwm_freq_pre_divider=%d mode=%x\n",
+		      aux->name, *current_level, bl->max, bl->pwm_freq_pre_divider, *current_mode);
+	DRM_DEBUG_KMS("%s: Backlight caps: pwmgen_bit_count=%d lsb_reg_used=%d aux_enable=%d\n",
+		      aux->name, bl->pwmgen_bit_count, bl->lsb_reg_used, bl->aux_enable);
+	return 0;
+}
+EXPORT_SYMBOL(drm_edp_backlight_init);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 133c9cb742a7..82673e8f21c3 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -257,11 +257,8 @@ struct intel_panel {
 		struct pwm_device *pwm;
 		struct pwm_state pwm_state;
 
-		/* DPCD backlight */
-		u8 pwmgen_bit_count;
-		u8 pwm_freq_pre_divider;
-
 		struct backlight_device *device;
+		struct drm_edp_backlight_info vesa_edp_info;
 
 		const struct intel_panel_bl_funcs *funcs;
 		void (*power)(struct intel_connector *, bool enable);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index 94ce5ca1affa..b1ebfd854a42 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -25,303 +25,73 @@
 #include "intel_display_types.h"
 #include "intel_dp_aux_backlight.h"
 
-static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
-{
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-	u8 reg_val = 0;
-
-	/* Early return when display use other mechanism to enable backlight. */
-	if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
-		return;
-
-	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
-			      &reg_val) < 0) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_DISPLAY_CONTROL_REGISTER);
-		return;
-	}
-	if (enable)
-		reg_val |= DP_EDP_BACKLIGHT_ENABLE;
-	else
-		reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
-
-	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
-			       reg_val) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
-			    enable ? "enable" : "disable");
-	}
-}
-
-static bool intel_dp_aux_backlight_dpcd_mode(struct intel_connector *connector)
-{
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-	u8 mode_reg;
-
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
-			      &mode_reg) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read the DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
-		return false;
-	}
-
-	return (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
-	       DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
-}
-
-/*
- * Read the current backlight value from DPCD register(s) based
- * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
- */
 static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 {
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-	u8 read_val[2] = { 0x0 };
-	u16 level = 0;
-
-	/*
-	 * If we're not in DPCD control mode yet, the programmed brightness
-	 * value is meaningless and we should assume max brightness
-	 */
-	if (!intel_dp_aux_backlight_dpcd_mode(connector))
-		return connector->panel.backlight.max;
-
-	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
-			     &read_val, sizeof(read_val)) < 0) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
-		return 0;
-	}
-	level = read_val[0];
-	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
-		level = (read_val[0] << 8 | read_val[1]);
-
-	return level;
+	return connector->panel.backlight.level;
 }
 
-/*
- * Sends the current backlight level over the aux channel, checking if its using
- * 8-bit or 16 bit value (MSB and LSB)
- */
 static void
-intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 level)
+intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state,
+			   u32 level)
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-	u8 vals[2] = { 0x0 };
-
-	vals[0] = level;
+	struct intel_panel *panel = &connector->panel;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
 
-	/* Write the MSB and/or LSB */
-	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
-		vals[0] = (level & 0xFF00) >> 8;
-		vals[1] = (level & 0xFF);
-	}
-	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
-			      vals, sizeof(vals)) < 0) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to write aux backlight level\n");
-		return;
-	}
+	drm_edp_backlight_set_level(&intel_dp->aux, &panel->backlight.vesa_edp_info, level);
 }
 
-static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
-					  const struct drm_connector_state *conn_state)
+static void
+intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
+			      const struct drm_connector_state *conn_state)
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_panel *panel = &connector->panel;
-	u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
-
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
-		return;
-	}
-
-	new_dpcd_buf = dpcd_buf;
-	edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
-
-	switch (edp_backlight_mode) {
-	case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM:
-	case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET:
-	case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT:
-		new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
-		new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
-
-		if (drm_dp_dpcd_writeb(&intel_dp->aux,
-				       DP_EDP_PWMGEN_BIT_COUNT,
-				       panel->backlight.pwmgen_bit_count) < 0)
-			drm_dbg_kms(&i915->drm,
-				    "Failed to write aux pwmgen bit count\n");
-
-		break;
-
-	/* Do nothing when it is already DPCD mode */
-	case DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD:
-	default:
-		break;
-	}
-
-	if (panel->backlight.pwm_freq_pre_divider) {
-		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
-				       panel->backlight.pwm_freq_pre_divider) == 1)
-			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
-		else
-			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
-	}
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
 
-	if (new_dpcd_buf != dpcd_buf) {
-		if (drm_dp_dpcd_writeb(&intel_dp->aux,
-			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
-			drm_dbg_kms(&i915->drm,
-				    "Failed to write aux backlight mode\n");
-		}
-	}
-
-	intel_dp_aux_set_backlight(conn_state,
-				   connector->panel.backlight.level);
-	set_aux_backlight_enable(intel_dp, true);
+	drm_edp_backlight_enable(&intel_dp->aux, &panel->backlight.vesa_edp_info,
+				 panel->backlight.level);
 }
 
-static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old_conn_state)
-{
-	set_aux_backlight_enable(enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)),
-				 false);
-}
-
-/*
- * Compute PWM frequency divider value based off the frequency provided to us by the vbt.
- * The PWM Frequency is calculated as 27Mhz / (F x P).
- * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
- *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
- * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
- *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
- */
-static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
+static void
+intel_dp_aux_disable_backlight(const struct drm_connector_state *old_conn_state)
 {
-	struct drm_i915_private *i915 = to_i915(connector->base.dev);
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct intel_connector *connector = to_intel_connector(old_conn_state->connector);
 	struct intel_panel *panel = &connector->panel;
-	u32 max_backlight = 0;
-	int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
-	u8 pn, pn_min, pn_max;
-
-	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn) == 1) {
-		pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
-		max_backlight = (1 << pn) - 1;
-	}
-
-	/* Find desired value of (F x P)
-	 * Note that, if F x P is out of supported range, the maximum value or
-	 * minimum value will applied automatically. So no need to check that.
-	 */
-	freq = i915->vbt.backlight.pwm_freq_hz;
-	drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
-		    freq);
-	if (!freq) {
-		drm_dbg_kms(&i915->drm,
-			    "Use panel default backlight frequency\n");
-		return max_backlight;
-	}
-
-	fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
-
-	/* Use highest possible value of Pn for more granularity of brightness
-	 * adjustment while satifying the conditions below.
-	 * - Pn is in the range of Pn_min and Pn_max
-	 * - F is in the range of 1 and 255
-	 * - FxP is within 25% of desired value.
-	 *   Note: 25% is arbitrary value and may need some tweak.
-	 */
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read pwmgen bit count cap min\n");
-		return max_backlight;
-	}
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read pwmgen bit count cap max\n");
-		return max_backlight;
-	}
-	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
-	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
 
-	/* Ensure frequency is within 25% of desired value */
-	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
-	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
-
-	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
-		drm_dbg_kms(&i915->drm,
-			    "VBT defined backlight frequency out of range\n");
-		return max_backlight;
-	}
-
-	for (pn = pn_max; pn >= pn_min; pn--) {
-		f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
-		fxp_actual = f << pn;
-		if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
-			break;
-	}
-
-	drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
-	if (drm_dp_dpcd_writeb(&intel_dp->aux,
-			       DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to write aux pwmgen bit count\n");
-		return max_backlight;
-	}
-
-	panel->backlight.pwmgen_bit_count = pn;
-	panel->backlight.pwm_freq_pre_divider = f;
-
-	max_backlight = (1 << pn) - 1;
-
-	return max_backlight;
+	drm_edp_backlight_disable(&intel_dp->aux, &panel->backlight.vesa_edp_info);
 }
 
 static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
 					enum pipe pipe)
 {
 	struct intel_panel *panel = &connector->panel;
+	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	u16 current_level;
+	u8 current_mode;
+	int ret;
 
-	panel->backlight.max = intel_dp_aux_calc_max_backlight(connector);
-	if (!panel->backlight.max)
-		return -ENODEV;
+	ret = drm_edp_backlight_init(&intel_dp->aux, &panel->backlight.vesa_edp_info,
+				     i915->vbt.backlight.pwm_freq_hz, intel_dp->edp_dpcd,
+				     &current_level, &current_mode);
+	if (ret < 0)
+		return ret;
 
+	panel->backlight.max = panel->backlight.vesa_edp_info.max;
 	panel->backlight.min = 0;
-	panel->backlight.level = intel_dp_aux_get_backlight(connector);
-	panel->backlight.enabled = intel_dp_aux_backlight_dpcd_mode(connector) &&
-				   panel->backlight.level != 0;
+	if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
+		panel->backlight.level = current_level;
+		panel->backlight.enabled = panel->backlight.level != 0;
+	} else {
+		panel->backlight.level = panel->backlight.max;
+		panel->backlight.enabled = false;
+	}
 
 	return 0;
 }
 
-static bool
-intel_dp_aux_display_control_capable(struct intel_connector *connector)
-{
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-
-	/* Check the eDP Display control capabilities registers to determine if
-	 * the panel can support backlight control over the aux channel
-	 */
-	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
-	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
-		drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
-		return true;
-	}
-	return false;
-}
-
 static const struct intel_panel_bl_funcs intel_dp_bl_funcs = {
 	.setup = intel_dp_aux_setup_backlight,
 	.enable = intel_dp_aux_enable_backlight,
@@ -337,9 +107,11 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	if (i915->params.enable_dpcd_backlight == 0 ||
-	    !intel_dp_aux_display_control_capable(intel_connector))
+	    !drm_edp_backlight_supported(intel_dp->edp_dpcd))
 		return -ENODEV;
 
+	drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
+
 	/*
 	 * There are a lot of machines that don't advertise the backlight
 	 * control interface to use properly in their VBIOS, :\
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 6b40258927bf..082fb832d4f6 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1598,6 +1598,24 @@ drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
 		DP_MSA_TIMING_PAR_IGNORED;
 }
 
+/**
+ * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support
+ * @edp_dpcd: The DPCD to check
+ *
+ * Note that currently this function will return %false for panels which support various DPCD
+ * backlight features but which require the brightness be set through PWM, and don't support setting
+ * the brightness level via the DPCD. This is a TODO.
+ *
+ * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false
+ * otherwise
+ */
+static inline bool
+drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
+{
+	return (edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
+		(edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP);
+}
+
 /*
  * DisplayPort AUX channel
  */
@@ -1912,6 +1930,36 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, u32 edid_quirks,
 	return (desc->quirks | edid_quirks) & BIT(quirk);
 }
 
+/**
+ * struct drm_edp_backlight_info - Probed eDP backlight info struct
+ * @pwmgen_bit_count: The pwmgen bit count
+ * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any
+ * @max: The maximum backlight level that may be set
+ * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register?
+ * @aux_enable: Does the panel support the AUX enable cap?
+ *
+ * This structure contains various data about an eDP backlight, which can be populated by using
+ * drm_edp_backlight_init().
+ */
+struct drm_edp_backlight_info {
+	u8 pwmgen_bit_count;
+	u8 pwm_freq_pre_divider;
+	u16 max;
+
+	bool lsb_reg_used : 1;
+	bool aux_enable : 1;
+};
+
+int
+drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+		       u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
+		       u16 *current_level, u8 *current_mode);
+int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+				u16 level);
+int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
+			     u16 level);
+int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl);
+
 #ifdef CONFIG_DRM_DP_CEC
 void drm_dp_cec_irq(struct drm_dp_aux *aux);
 void drm_dp_cec_register_connector(struct drm_dp_aux *aux,
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [RFC 4/5] drm/dp: Extract i915's eDP backlight code into DRM helpers

[Jani Nikula]

On Wed, 09 Dec 2020, Lyude Paul <lyude@redhat.com> wrote:
> Since we're about to implement eDP backlight support in nouveau using the
> standard protocol from VESA, we might as well just take the code that's
> already written for this and move it into a set of shared DRM helpers.
>
> Note that these helpers are intended to handle DPCD related backlight
> control bits such as setting the brightness level over AUX, probing the
> backlight's TCON, enabling/disabling the backlight over AUX if supported,
> etc. Any PWM-related portions of backlight control are explicitly left up
> to the driver, as these will vary from platform to platform.
>
> The only exception to this is the calculation of the PWM frequency
> pre-divider value. This is because the only platform-specific information
> required for this is the PWM frequency of the panel, which the driver is
> expected to provide if available. The actual algorithm for calculating this
> value is standard and is defined in the eDP specification from VESA.
>
> Note that these helpers do not yet implement the full range of features
> the VESA backlight interface provides, and only provide the following
> functionality (all of which was already present in i915's DPCD backlight
> support):
>
> * Basic control of brightness levels
> * Basic probing of backlight capabilities
> * Helpers for enabling and disabling the backlight

Overall I like where this is going. Again, not a full review yet, just a
few notes below.

>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Dave Airlie <airlied@gmail.com>
> Cc: greg.depoire@gmail.com
> ---
>  drivers/gpu/drm/drm_dp_helper.c               | 332 ++++++++++++++++++
>  .../drm/i915/display/intel_display_types.h    |   5 +-
>  .../drm/i915/display/intel_dp_aux_backlight.c | 304 ++--------------
>  include/drm/drm_dp_helper.h                   |  48 +++
>  4 files changed, 419 insertions(+), 270 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 5bd0934004e3..06fdddf44e54 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -2596,3 +2596,335 @@ void drm_dp_vsc_sdp_log(const char *level, struct device *dev,
>  #undef DP_SDP_LOG
>  }
>  EXPORT_SYMBOL(drm_dp_vsc_sdp_log);
> +
> +/**
> + * drm_edp_backlight_set_level() - Set the backlight level of an eDP panel via AUX
> + * @aux: The DP AUX channel to use
> + * @bl: Backlight capability info from drm_edp_backlight_init()
> + * @level: The brightness level to set
> + *
> + * Sets the brightness level of an eDP panel's backlight. Note that the panel's backlight must
> + * already have been enabled by the driver by calling drm_edp_backlight_enable().
> + *
> + * Returns: %0 on success, negative error code on failure
> + */
> +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
> +				u16 level)

I think I'd go for s/backlight/brightness/g function naming thoughout,
to account for OLED. "Backlight" unnecessarily underlines the
technology.

> +{
> +	int ret;
> +	u8 buf[2] = { 0 };
> +
> +	if (bl->lsb_reg_used) {
> +		buf[0] = (level & 0xFF00) >> 8;
> +		buf[1] = (level & 0x00FF);
> +	} else {
> +		buf[0] = level;
> +	}
> +
> +	ret = drm_dp_dpcd_write(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, sizeof(buf));
> +	if (ret != sizeof(buf)) {
> +		DRM_ERROR("%s: Failed to write aux backlight level: %d\n", aux->name, ret);

I'd really like to have a way to get from struct drm_dp_aux to struct
drm_device to retain the device specific logging here. It'd be useful in
the lower level dpcd access functions too.

> +		return ret < 0 ? ret : -EIO;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_edp_backlight_set_level);
> +
> +static int
> +drm_edp_backlight_set_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
> +			     bool enable)
> +{
> +	int ret;
> +	u8 buf;
> +
> +	/* The panel uses something other then DPCD for enabling it's backlight */
> +	if (!bl->aux_enable)
> +		return 0;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &buf);
> +	if (ret != 1) {
> +		DRM_ERROR("%s: Failed to read eDP display control register: %d\n", aux->name, ret);
> +		return ret < 0 ? ret : -EIO;
> +	}
> +	if (enable)
> +		buf |= DP_EDP_BACKLIGHT_ENABLE;
> +	else
> +		buf &= ~DP_EDP_BACKLIGHT_ENABLE;
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, buf);
> +	if (ret != 1) {
> +		DRM_ERROR("%s: Failed to write eDP display control register: %d\n", aux->name, ret);
> +		return ret < 0 ? ret : -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * drm_edp_backlight_enable() - Enable an eDP panel's backlight using DPCD
> + * @aux: The DP AUX channel to use
> + * @bl: Backlight capability info from drm_edp_backlight_init()
> + * @level: The initial backlight level to set via AUX, if there is one
> + *
> + * This function handles enabling DPCD backlight controls on a panel over DPCD, while additionally
> + * restoring any important backlight state such as the given backlight level, the brightness byte
> + * count, backlight frequency, etc.
> + *
> + * Note that certain panels, while supporting brightness level controls over DPCD, may not support
> + * having their backlights enabled via the standard %DP_EDP_DISPLAY_CONTROL_REGISTER. On such panels
> + * &drm_edp_backlight_info.aux_enable will be set to %false, this function will skip the step of
> + * programming the %DP_EDP_DISPLAY_CONTROL_REGISTER, and the driver must perform the required
> + * implementation specific step for enabling the backlight after calling this function.
> + *
> + * Returns: %0 on success, negative error code on failure.
> + */
> +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
> +			     const u16 level)
> +{
> +	int ret;
> +	u8 dpcd_buf, new_dpcd_buf;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n", aux->name, ret);
> +		return ret < 0 ? ret : -EIO;
> +	}
> +
> +	new_dpcd_buf = dpcd_buf;
> +
> +	if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) != DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> +		new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> +		new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> +
> +		ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count);
> +		if (ret != 1)
> +			DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count: %d\n",
> +				      aux->name, ret);
> +	}
> +
> +	if (bl->pwm_freq_pre_divider) {
> +		ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_FREQ_SET, bl->pwm_freq_pre_divider);
> +		if (ret != 1)
> +			DRM_DEBUG_KMS("%s: Failed to write aux backlight frequency: %d\n",
> +				      aux->name, ret);
> +		else
> +			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> +	}
> +
> +	if (new_dpcd_buf != dpcd_buf) {
> +		ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf);
> +		if (ret != 1) {
> +			DRM_DEBUG_KMS("%s: Failed to write aux backlight mode: %d\n",
> +				      aux->name, ret);
> +			return ret < 0 ? ret : -EIO;
> +		}
> +	}
> +
> +	ret = drm_edp_backlight_set_level(aux, bl, level);
> +	if (ret < 0)
> +		return ret;
> +	ret = drm_edp_backlight_set_enable(aux, bl, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_edp_backlight_enable);
> +
> +/**
> + * drm_edp_backlight_disable() - Disable an eDP backlight using DPCD, if supported
> + * @aux: The DP AUX channel to use
> + * @bl: Backlight capability info from drm_edp_backlight_init()
> + *
> + * This function handles disabling DPCD backlight controls on a panel over AUX. Note that some
> + * panels have backlights that are enabled/disabled by other means, despite having their brightness
> + * values controlled through DPCD. On such panels &drm_edp_backlight_info.aux_enable will be set to
> + * %false, this function will become a no-op (and we will skip updating
> + * %DP_EDP_DISPLAY_CONTROL_REGISTER), and the driver must take care to perform it's own
> + * implementation specific step for disabling the backlight.
> + *
> + * Returns: %0 on success or no-op, negative error code on failure.
> + */
> +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl)
> +{
> +	int ret;
> +
> +	ret = drm_edp_backlight_set_enable(aux, bl, false);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_edp_backlight_disable);
> +
> +static inline int
> +drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
> +			    u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> +{
> +	int fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> +	int ret;
> +	u8 pn, pn_min, pn_max;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap: %d\n", aux->name, ret);
> +		return -ENODEV;
> +	}
> +
> +	pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> +	bl->max = (1 << pn) - 1;
> +	if (!driver_pwm_freq_hz)
> +		return 0;
> +
> +	/*
> +	 * Set PWM Frequency divider to match desired frequency provided by the driver.
> +	 * The PWM Frequency is calculated as 27Mhz / (F x P).
> +	 * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
> +	 *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> +	 * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
> +	 *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> +	 */
> +
> +	/* Find desired value of (F x P)
> +	 * Note that, if F x P is out of supported range, the maximum value or minimum value will
> +	 * applied automatically. So no need to check that.
> +	 */
> +	fxp = DIV_ROUND_CLOSEST(1000 * DP_EDP_BACKLIGHT_FREQ_BASE_KHZ, driver_pwm_freq_hz);
> +
> +	/* Use highest possible value of Pn for more granularity of brightness adjustment while
> +	 * satifying the conditions below.
> +	 * - Pn is in the range of Pn_min and Pn_max
> +	 * - F is in the range of 1 and 255
> +	 * - FxP is within 25% of desired value.
> +	 *   Note: 25% is arbitrary value and may need some tweak.
> +	 */
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap min: %d\n", aux->name, ret);
> +		return 0;
> +	}
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap max: %d\n", aux->name, ret);
> +		return 0;
> +	}
> +	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> +	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> +
> +	/* Ensure frequency is within 25% of desired value */
> +	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> +	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> +	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> +		DRM_DEBUG_KMS("%s: Driver defined backlight frequency (%d) out of range\n",
> +			      aux->name, driver_pwm_freq_hz);
> +		return 0;
> +	}
> +
> +	for (pn = pn_max; pn >= pn_min; pn--) {
> +		f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> +		fxp_actual = f << pn;
> +		if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> +			break;
> +	}
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, pn);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count: %d\n", aux->name, ret);
> +		return 0;
> +	}
> +	bl->pwmgen_bit_count = pn;
> +	bl->max = (1 << pn) - 1;
> +
> +	if (edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) {
> +		bl->pwm_freq_pre_divider = f;
> +		DRM_DEBUG_KMS("%s: Using backlight frequency from driver (%dHz)\n",
> +			      aux->name, driver_pwm_freq_hz);
> +	}
> +
> +	return 0;
> +}
> +
> +static inline int
> +drm_edp_backlight_probe_level(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
> +			      u8 *current_mode)
> +{
> +	int ret;
> +	u8 buf[2];
> +	u8 mode_reg;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg);
> +	if (ret != 1) {
> +		DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n", aux->name, ret);
> +		return ret < 0 ? ret : -EIO;
> +	}
> +
> +	*current_mode = (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK);
> +	if (*current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> +		int size = 1 + bl->lsb_reg_used;
> +
> +		ret = drm_dp_dpcd_read(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, size);
> +		if (ret != size) {
> +			DRM_DEBUG_KMS("%s: Failed to read backlight level: %d\n", aux->name, ret);
> +			return ret < 0 ? ret : -EIO;
> +		}
> +
> +		if (bl->lsb_reg_used)
> +			return (buf[0] << 8) | buf[1];
> +		else
> +			return buf[0];
> +	}
> +
> +	/*
> +	 * If we're not in DPCD control mode yet, the programmed brightness value is meaningless and
> +	 * the driver should assume max brightness
> +	 */
> +	return bl->max;
> +}
> +
> +/**
> + * drm_edp_backlight_init() - Probe a display panel's TCON using the standard VESA eDP backlight
> + * interface.
> + * @aux: The DP aux device to use for probing
> + * @bl: The &drm_edp_backlight_info struct to fill out with information on the backlight
> + * @driver_pwm_freq_hz: Optional PWM frequency from the driver in hz
> + * @edp_dpcd: A cached copy of the eDP DPCD
> + * @current_level: Where to store the probed brightness level
> + * @current_mode: Where to store the currently set backlight control mode
> + *
> + * Initializes a &drm_edp_backlight_info struct by probing @aux for it's backlight capabilities,
> + * along with also probing the current and maximum supported brightness levels.
> + *
> + * If @driver_pwm_freq_hz is non-zero, this will be used as the backlight frequency. Otherwise, the
> + * default frequency from the panel is used.
> + *
> + * Returns: %0 on success, negative error code on failure.
> + */
> +int
> +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
> +		       u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> +		       u16 *current_level, u8 *current_mode)
> +{
> +	int ret;
> +
> +	if (edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
> +		bl->aux_enable = true;
> +	if (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> +		bl->lsb_reg_used = true;
> +
> +	ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz, edp_dpcd);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = drm_edp_backlight_probe_level(aux, bl, current_mode);
> +	if (ret < 0)
> +		return ret;
> +	*current_level = ret;
> +
> +	DRM_DEBUG_KMS("%s: Found backlight level=%d/%d pwm_freq_pre_divider=%d mode=%x\n",
> +		      aux->name, *current_level, bl->max, bl->pwm_freq_pre_divider, *current_mode);
> +	DRM_DEBUG_KMS("%s: Backlight caps: pwmgen_bit_count=%d lsb_reg_used=%d aux_enable=%d\n",
> +		      aux->name, bl->pwmgen_bit_count, bl->lsb_reg_used, bl->aux_enable);
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_edp_backlight_init);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 133c9cb742a7..82673e8f21c3 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -257,11 +257,8 @@ struct intel_panel {
>  		struct pwm_device *pwm;
>  		struct pwm_state pwm_state;
>  
> -		/* DPCD backlight */
> -		u8 pwmgen_bit_count;
> -		u8 pwm_freq_pre_divider;
> -
>  		struct backlight_device *device;
> +		struct drm_edp_backlight_info vesa_edp_info;
>  
>  		const struct intel_panel_bl_funcs *funcs;
>  		void (*power)(struct intel_connector *, bool enable);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index 94ce5ca1affa..b1ebfd854a42 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -25,303 +25,73 @@
>  #include "intel_display_types.h"
>  #include "intel_dp_aux_backlight.h"
>  
> -static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
> -{
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -	u8 reg_val = 0;
> -
> -	/* Early return when display use other mechanism to enable backlight. */
> -	if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
> -		return;
> -
> -	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> -			      &reg_val) < 0) {
> -		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
> -			    DP_EDP_DISPLAY_CONTROL_REGISTER);
> -		return;
> -	}
> -	if (enable)
> -		reg_val |= DP_EDP_BACKLIGHT_ENABLE;
> -	else
> -		reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
> -
> -	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> -			       reg_val) != 1) {
> -		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
> -			    enable ? "enable" : "disable");
> -	}
> -}
> -
> -static bool intel_dp_aux_backlight_dpcd_mode(struct intel_connector *connector)
> -{
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -	u8 mode_reg;
> -
> -	if (drm_dp_dpcd_readb(&intel_dp->aux,
> -			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> -			      &mode_reg) != 1) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Failed to read the DPCD register 0x%x\n",
> -			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> -		return false;
> -	}
> -
> -	return (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
> -	       DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> -}
> -
> -/*
> - * Read the current backlight value from DPCD register(s) based
> - * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
> - */
>  static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
>  {
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -	u8 read_val[2] = { 0x0 };
> -	u16 level = 0;
> -
> -	/*
> -	 * If we're not in DPCD control mode yet, the programmed brightness
> -	 * value is meaningless and we should assume max brightness
> -	 */
> -	if (!intel_dp_aux_backlight_dpcd_mode(connector))
> -		return connector->panel.backlight.max;
> -
> -	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> -			     &read_val, sizeof(read_val)) < 0) {
> -		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
> -			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> -		return 0;
> -	}
> -	level = read_val[0];
> -	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> -		level = (read_val[0] << 8 | read_val[1]);
> -
> -	return level;
> +	return connector->panel.backlight.level;
>  }
>  
> -/*
> - * Sends the current backlight level over the aux channel, checking if its using
> - * 8-bit or 16 bit value (MSB and LSB)
> - */
>  static void
> -intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 level)
> +intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state,
> +			   u32 level)
>  {
>  	struct intel_connector *connector = to_intel_connector(conn_state->connector);
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -	u8 vals[2] = { 0x0 };
> -
> -	vals[0] = level;
> +	struct intel_panel *panel = &connector->panel;
> +	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
>  
> -	/* Write the MSB and/or LSB */
> -	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
> -		vals[0] = (level & 0xFF00) >> 8;
> -		vals[1] = (level & 0xFF);
> -	}
> -	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> -			      vals, sizeof(vals)) < 0) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Failed to write aux backlight level\n");
> -		return;
> -	}
> +	drm_edp_backlight_set_level(&intel_dp->aux, &panel->backlight.vesa_edp_info, level);
>  }
>  
> -static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
> -					  const struct drm_connector_state *conn_state)
> +static void
> +intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
> +			      const struct drm_connector_state *conn_state)
>  {
>  	struct intel_connector *connector = to_intel_connector(conn_state->connector);
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	struct intel_panel *panel = &connector->panel;
> -	u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
> -
> -	if (drm_dp_dpcd_readb(&intel_dp->aux,
> -			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
> -		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
> -			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> -		return;
> -	}
> -
> -	new_dpcd_buf = dpcd_buf;
> -	edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> -
> -	switch (edp_backlight_mode) {
> -	case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM:
> -	case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET:
> -	case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT:
> -		new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> -		new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> -
> -		if (drm_dp_dpcd_writeb(&intel_dp->aux,
> -				       DP_EDP_PWMGEN_BIT_COUNT,
> -				       panel->backlight.pwmgen_bit_count) < 0)
> -			drm_dbg_kms(&i915->drm,
> -				    "Failed to write aux pwmgen bit count\n");
> -
> -		break;
> -
> -	/* Do nothing when it is already DPCD mode */
> -	case DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD:
> -	default:
> -		break;
> -	}
> -
> -	if (panel->backlight.pwm_freq_pre_divider) {
> -		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
> -				       panel->backlight.pwm_freq_pre_divider) == 1)
> -			new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> -		else
> -			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
> -	}
> +	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
>  
> -	if (new_dpcd_buf != dpcd_buf) {
> -		if (drm_dp_dpcd_writeb(&intel_dp->aux,
> -			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
> -			drm_dbg_kms(&i915->drm,
> -				    "Failed to write aux backlight mode\n");
> -		}
> -	}
> -
> -	intel_dp_aux_set_backlight(conn_state,
> -				   connector->panel.backlight.level);
> -	set_aux_backlight_enable(intel_dp, true);
> +	drm_edp_backlight_enable(&intel_dp->aux, &panel->backlight.vesa_edp_info,
> +				 panel->backlight.level);
>  }
>  
> -static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old_conn_state)
> -{
> -	set_aux_backlight_enable(enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)),
> -				 false);
> -}
> -
> -/*
> - * Compute PWM frequency divider value based off the frequency provided to us by the vbt.
> - * The PWM Frequency is calculated as 27Mhz / (F x P).
> - * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
> - *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> - * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
> - *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> - */
> -static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
> +static void
> +intel_dp_aux_disable_backlight(const struct drm_connector_state *old_conn_state)
>  {
> -	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> +	struct intel_connector *connector = to_intel_connector(old_conn_state->connector);
>  	struct intel_panel *panel = &connector->panel;
> -	u32 max_backlight = 0;
> -	int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> -	u8 pn, pn_min, pn_max;
> -
> -	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn) == 1) {
> -		pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> -		max_backlight = (1 << pn) - 1;
> -	}
> -
> -	/* Find desired value of (F x P)
> -	 * Note that, if F x P is out of supported range, the maximum value or
> -	 * minimum value will applied automatically. So no need to check that.
> -	 */
> -	freq = i915->vbt.backlight.pwm_freq_hz;
> -	drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
> -		    freq);
> -	if (!freq) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Use panel default backlight frequency\n");
> -		return max_backlight;
> -	}
> -
> -	fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
> -
> -	/* Use highest possible value of Pn for more granularity of brightness
> -	 * adjustment while satifying the conditions below.
> -	 * - Pn is in the range of Pn_min and Pn_max
> -	 * - F is in the range of 1 and 255
> -	 * - FxP is within 25% of desired value.
> -	 *   Note: 25% is arbitrary value and may need some tweak.
> -	 */
> -	if (drm_dp_dpcd_readb(&intel_dp->aux,
> -			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Failed to read pwmgen bit count cap min\n");
> -		return max_backlight;
> -	}
> -	if (drm_dp_dpcd_readb(&intel_dp->aux,
> -			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Failed to read pwmgen bit count cap max\n");
> -		return max_backlight;
> -	}
> -	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> -	pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> +	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
>  
> -	/* Ensure frequency is within 25% of desired value */
> -	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> -	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> -
> -	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> -		drm_dbg_kms(&i915->drm,
> -			    "VBT defined backlight frequency out of range\n");
> -		return max_backlight;
> -	}
> -
> -	for (pn = pn_max; pn >= pn_min; pn--) {
> -		f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> -		fxp_actual = f << pn;
> -		if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> -			break;
> -	}
> -
> -	drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
> -	if (drm_dp_dpcd_writeb(&intel_dp->aux,
> -			       DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
> -		drm_dbg_kms(&i915->drm,
> -			    "Failed to write aux pwmgen bit count\n");
> -		return max_backlight;
> -	}
> -
> -	panel->backlight.pwmgen_bit_count = pn;
> -	panel->backlight.pwm_freq_pre_divider = f;
> -
> -	max_backlight = (1 << pn) - 1;
> -
> -	return max_backlight;
> +	drm_edp_backlight_disable(&intel_dp->aux, &panel->backlight.vesa_edp_info);
>  }
>  
>  static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
>  					enum pipe pipe)
>  {
>  	struct intel_panel *panel = &connector->panel;
> +	struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +	u16 current_level;
> +	u8 current_mode;
> +	int ret;
>  
> -	panel->backlight.max = intel_dp_aux_calc_max_backlight(connector);
> -	if (!panel->backlight.max)
> -		return -ENODEV;
> +	ret = drm_edp_backlight_init(&intel_dp->aux, &panel->backlight.vesa_edp_info,
> +				     i915->vbt.backlight.pwm_freq_hz, intel_dp->edp_dpcd,
> +				     &current_level, &current_mode);
> +	if (ret < 0)
> +		return ret;
>  
> +	panel->backlight.max = panel->backlight.vesa_edp_info.max;
>  	panel->backlight.min = 0;
> -	panel->backlight.level = intel_dp_aux_get_backlight(connector);
> -	panel->backlight.enabled = intel_dp_aux_backlight_dpcd_mode(connector) &&
> -				   panel->backlight.level != 0;
> +	if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> +		panel->backlight.level = current_level;
> +		panel->backlight.enabled = panel->backlight.level != 0;
> +	} else {
> +		panel->backlight.level = panel->backlight.max;
> +		panel->backlight.enabled = false;
> +	}
>  
>  	return 0;
>  }
>  
> -static bool
> -intel_dp_aux_display_control_capable(struct intel_connector *connector)
> -{
> -	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -
> -	/* Check the eDP Display control capabilities registers to determine if
> -	 * the panel can support backlight control over the aux channel
> -	 */
> -	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
> -	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
> -		drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
> -		return true;
> -	}
> -	return false;
> -}
> -
>  static const struct intel_panel_bl_funcs intel_dp_bl_funcs = {
>  	.setup = intel_dp_aux_setup_backlight,
>  	.enable = intel_dp_aux_enable_backlight,
> @@ -337,9 +107,11 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  
>  	if (i915->params.enable_dpcd_backlight == 0 ||
> -	    !intel_dp_aux_display_control_capable(intel_connector))
> +	    !drm_edp_backlight_supported(intel_dp->edp_dpcd))
>  		return -ENODEV;
>  
> +	drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
> +
>  	/*
>  	 * There are a lot of machines that don't advertise the backlight
>  	 * control interface to use properly in their VBIOS, :\
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 6b40258927bf..082fb832d4f6 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1598,6 +1598,24 @@ drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
>  		DP_MSA_TIMING_PAR_IGNORED;
>  }
>  
> +/**
> + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support
> + * @edp_dpcd: The DPCD to check
> + *
> + * Note that currently this function will return %false for panels which support various DPCD
> + * backlight features but which require the brightness be set through PWM, and don't support setting
> + * the brightness level via the DPCD. This is a TODO.
> + *
> + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false
> + * otherwise
> + */
> +static inline bool
> +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> +{
> +	return (edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
> +		(edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP);
> +}
> +
>  /*
>   * DisplayPort AUX channel
>   */
> @@ -1912,6 +1930,36 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, u32 edid_quirks,
>  	return (desc->quirks | edid_quirks) & BIT(quirk);
>  }
>  
> +/**
> + * struct drm_edp_backlight_info - Probed eDP backlight info struct
> + * @pwmgen_bit_count: The pwmgen bit count
> + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any
> + * @max: The maximum backlight level that may be set
> + * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register?
> + * @aux_enable: Does the panel support the AUX enable cap?
> + *
> + * This structure contains various data about an eDP backlight, which can be populated by using
> + * drm_edp_backlight_init().
> + */
> +struct drm_edp_backlight_info {
> +	u8 pwmgen_bit_count;
> +	u8 pwm_freq_pre_divider;
> +	u16 max;
> +
> +	bool lsb_reg_used : 1;
> +	bool aux_enable : 1;
> +};
> +
> +int
> +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
> +		       u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> +		       u16 *current_level, u8 *current_mode);
> +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
> +				u16 level);
> +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
> +			     u16 level);
> +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl);
> +
>  #ifdef CONFIG_DRM_DP_CEC
>  void drm_dp_cec_irq(struct drm_dp_aux *aux);
>  void drm_dp_cec_register_connector(struct drm_dp_aux *aux,

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [RFC 4/5] drm/dp: Extract i915's eDP backlight code into DRM helpers

[Lyude Paul]

On Fri, 2020-12-11 at 17:01 +0200, Jani Nikula wrote:
> On Wed, 09 Dec 2020, Lyude Paul <lyude@redhat.com> wrote:
> > Since we're about to implement eDP backlight support in nouveau using the
> > standard protocol from VESA, we might as well just take the code that's
> > already written for this and move it into a set of shared DRM helpers.
> > 
> > Note that these helpers are intended to handle DPCD related backlight
> > control bits such as setting the brightness level over AUX, probing the
> > backlight's TCON, enabling/disabling the backlight over AUX if supported,
> > etc. Any PWM-related portions of backlight control are explicitly left up
> > to the driver, as these will vary from platform to platform.
> > 
> > The only exception to this is the calculation of the PWM frequency
> > pre-divider value. This is because the only platform-specific information
> > required for this is the PWM frequency of the panel, which the driver is
> > expected to provide if available. The actual algorithm for calculating this
> > value is standard and is defined in the eDP specification from VESA.
> > 
> > Note that these helpers do not yet implement the full range of features
> > the VESA backlight interface provides, and only provide the following
> > functionality (all of which was already present in i915's DPCD backlight
> > support):
> > 
> > * Basic control of brightness levels
> > * Basic probing of backlight capabilities
> > * Helpers for enabling and disabling the backlight
> 
> Overall I like where this is going. Again, not a full review yet, just a
> few notes below.
> 
> > 
> > Signed-off-by: Lyude Paul <lyude@redhat.com>
> > Cc: Jani Nikula <jani.nikula@intel.com>
> > Cc: Dave Airlie <airlied@gmail.com>
> > Cc: greg.depoire@gmail.com
> > ---
> >  drivers/gpu/drm/drm_dp_helper.c               | 332 ++++++++++++++++++
> >  .../drm/i915/display/intel_display_types.h    |   5 +-
> >  .../drm/i915/display/intel_dp_aux_backlight.c | 304 ++--------------
> >  include/drm/drm_dp_helper.h                   |  48 +++
> >  4 files changed, 419 insertions(+), 270 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_dp_helper.c
> > b/drivers/gpu/drm/drm_dp_helper.c
> > index 5bd0934004e3..06fdddf44e54 100644
> > --- a/drivers/gpu/drm/drm_dp_helper.c
> > +++ b/drivers/gpu/drm/drm_dp_helper.c
> > @@ -2596,3 +2596,335 @@ void drm_dp_vsc_sdp_log(const char *level, struct
> > device *dev,
> >  #undef DP_SDP_LOG
> >  }
> >  EXPORT_SYMBOL(drm_dp_vsc_sdp_log);
> > +
> > +/**
> > + * drm_edp_backlight_set_level() - Set the backlight level of an eDP panel
> > via AUX
> > + * @aux: The DP AUX channel to use
> > + * @bl: Backlight capability info from drm_edp_backlight_init()
> > + * @level: The brightness level to set
> > + *
> > + * Sets the brightness level of an eDP panel's backlight. Note that the
> > panel's backlight must
> > + * already have been enabled by the driver by calling
> > drm_edp_backlight_enable().
> > + *
> > + * Returns: %0 on success, negative error code on failure
> > + */
> > +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl,
> > +                               u16 level)
> 
> I think I'd go for s/backlight/brightness/g function naming thoughout,
> to account for OLED. "Backlight" unnecessarily underlines the
> technology.

Hm, are we sure about this part? It makes sense in some places, but:

* The eDP spec refers to these as backlights
* "Brightness capability info" makes a bit less sense then backlight capability
info
* In general, it seems like we'd have a weird mix of "brightness" and
"backlight" in the docs in order for things to make sense

I'm fine with either though, although my vote is on backlight. In the mean time
I'm going to send a respin that's refactored + the one small change you
suggested in patch 3.

> 
> > +{
> > +       int ret;
> > +       u8 buf[2] = { 0 };
> > +
> > +       if (bl->lsb_reg_used) {
> > +               buf[0] = (level & 0xFF00) >> 8;
> > +               buf[1] = (level & 0x00FF);
> > +       } else {
> > +               buf[0] = level;
> > +       }
> > +
> > +       ret = drm_dp_dpcd_write(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf,
> > sizeof(buf));
> > +       if (ret != sizeof(buf)) {
> > +               DRM_ERROR("%s: Failed to write aux backlight level: %d\n",
> > aux->name, ret);
> 
> I'd really like to have a way to get from struct drm_dp_aux to struct
> drm_device to retain the device specific logging here. It'd be useful in
> the lower level dpcd access functions too.

I'll put this on my todo list and try to get to this in the near future, I've
been thinking the same thing myself for a while now.

> 
> > +               return ret < 0 ? ret : -EIO;
> > +       }
> > +
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL(drm_edp_backlight_set_level);
> > +
> > +static int
> > +drm_edp_backlight_set_enable(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl,
> > +                            bool enable)
> > +{
> > +       int ret;
> > +       u8 buf;
> > +
> > +       /* The panel uses something other then DPCD for enabling it's
> > backlight */
> > +       if (!bl->aux_enable)
> > +               return 0;
> > +
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &buf);
> > +       if (ret != 1) {
> > +               DRM_ERROR("%s: Failed to read eDP display control register:
> > %d\n", aux->name, ret);
> > +               return ret < 0 ? ret : -EIO;
> > +       }
> > +       if (enable)
> > +               buf |= DP_EDP_BACKLIGHT_ENABLE;
> > +       else
> > +               buf &= ~DP_EDP_BACKLIGHT_ENABLE;
> > +
> > +       ret = drm_dp_dpcd_writeb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, buf);
> > +       if (ret != 1) {
> > +               DRM_ERROR("%s: Failed to write eDP display control register:
> > %d\n", aux->name, ret);
> > +               return ret < 0 ? ret : -EIO;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +/**
> > + * drm_edp_backlight_enable() - Enable an eDP panel's backlight using DPCD
> > + * @aux: The DP AUX channel to use
> > + * @bl: Backlight capability info from drm_edp_backlight_init()
> > + * @level: The initial backlight level to set via AUX, if there is one
> > + *
> > + * This function handles enabling DPCD backlight controls on a panel over
> > DPCD, while additionally
> > + * restoring any important backlight state such as the given backlight
> > level, the brightness byte
> > + * count, backlight frequency, etc.
> > + *
> > + * Note that certain panels, while supporting brightness level controls
> > over DPCD, may not support
> > + * having their backlights enabled via the standard
> > %DP_EDP_DISPLAY_CONTROL_REGISTER. On such panels
> > + * &drm_edp_backlight_info.aux_enable will be set to %false, this function
> > will skip the step of
> > + * programming the %DP_EDP_DISPLAY_CONTROL_REGISTER, and the driver must
> > perform the required
> > + * implementation specific step for enabling the backlight after calling
> > this function.
> > + *
> > + * Returns: %0 on success, negative error code on failure.
> > + */
> > +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl,
> > +                            const u16 level)
> > +{
> > +       int ret;
> > +       u8 dpcd_buf, new_dpcd_buf;
> > +
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > &dpcd_buf);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n",
> > aux->name, ret);
> > +               return ret < 0 ? ret : -EIO;
> > +       }
> > +
> > +       new_dpcd_buf = dpcd_buf;
> > +
> > +       if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) !=
> > DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > +               new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> > +               new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > +
> > +               ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl-
> > >pwmgen_bit_count);
> > +               if (ret != 1)
> > +                       DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit
> > count: %d\n",
> > +                                     aux->name, ret);
> > +       }
> > +
> > +       if (bl->pwm_freq_pre_divider) {
> > +               ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_FREQ_SET, bl-
> > >pwm_freq_pre_divider);
> > +               if (ret != 1)
> > +                       DRM_DEBUG_KMS("%s: Failed to write aux backlight
> > frequency: %d\n",
> > +                                     aux->name, ret);
> > +               else
> > +                       new_dpcd_buf |=
> > DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> > +       }
> > +
> > +       if (new_dpcd_buf != dpcd_buf) {
> > +               ret = drm_dp_dpcd_writeb(aux,
> > DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf);
> > +               if (ret != 1) {
> > +                       DRM_DEBUG_KMS("%s: Failed to write aux backlight
> > mode: %d\n",
> > +                                     aux->name, ret);
> > +                       return ret < 0 ? ret : -EIO;
> > +               }
> > +       }
> > +
> > +       ret = drm_edp_backlight_set_level(aux, bl, level);
> > +       if (ret < 0)
> > +               return ret;
> > +       ret = drm_edp_backlight_set_enable(aux, bl, true);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL(drm_edp_backlight_enable);
> > +
> > +/**
> > + * drm_edp_backlight_disable() - Disable an eDP backlight using DPCD, if
> > supported
> > + * @aux: The DP AUX channel to use
> > + * @bl: Backlight capability info from drm_edp_backlight_init()
> > + *
> > + * This function handles disabling DPCD backlight controls on a panel over
> > AUX. Note that some
> > + * panels have backlights that are enabled/disabled by other means, despite
> > having their brightness
> > + * values controlled through DPCD. On such panels
> > &drm_edp_backlight_info.aux_enable will be set to
> > + * %false, this function will become a no-op (and we will skip updating
> > + * %DP_EDP_DISPLAY_CONTROL_REGISTER), and the driver must take care to
> > perform it's own
> > + * implementation specific step for disabling the backlight.
> > + *
> > + * Returns: %0 on success or no-op, negative error code on failure.
> > + */
> > +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl)
> > +{
> > +       int ret;
> > +
> > +       ret = drm_edp_backlight_set_enable(aux, bl, false);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL(drm_edp_backlight_disable);
> > +
> > +static inline int
> > +drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct
> > drm_edp_backlight_info *bl,
> > +                           u16 driver_pwm_freq_hz, const u8
> > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> > +{
> > +       int fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> > +       int ret;
> > +       u8 pn, pn_min, pn_max;
> > +
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap:
> > %d\n", aux->name, ret);
> > +               return -ENODEV;
> > +       }
> > +
> > +       pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > +       bl->max = (1 << pn) - 1;
> > +       if (!driver_pwm_freq_hz)
> > +               return 0;
> > +
> > +       /*
> > +        * Set PWM Frequency divider to match desired frequency provided by
> > the driver.
> > +        * The PWM Frequency is calculated as 27Mhz / (F x P).
> > +        * - Where F = PWM Frequency Pre-Divider value programmed by field
> > 7:0 of the
> > +        *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> > +        * - Where P = 2^Pn, where Pn is the value programmed by field 4:0
> > of the
> > +        *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> > +        */
> > +
> > +       /* Find desired value of (F x P)
> > +        * Note that, if F x P is out of supported range, the maximum value
> > or minimum value will
> > +        * applied automatically. So no need to check that.
> > +        */
> > +       fxp = DIV_ROUND_CLOSEST(1000 * DP_EDP_BACKLIGHT_FREQ_BASE_KHZ,
> > driver_pwm_freq_hz);
> > +
> > +       /* Use highest possible value of Pn for more granularity of
> > brightness adjustment while
> > +        * satifying the conditions below.
> > +        * - Pn is in the range of Pn_min and Pn_max
> > +        * - F is in the range of 1 and 255
> > +        * - FxP is within 25% of desired value.
> > +        *   Note: 25% is arbitrary value and may need some tweak.
> > +        */
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN,
> > &pn_min);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap min:
> > %d\n", aux->name, ret);
> > +               return 0;
> > +       }
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX,
> > &pn_max);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap max:
> > %d\n", aux->name, ret);
> > +               return 0;
> > +       }
> > +       pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > +       pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > +
> > +       /* Ensure frequency is within 25% of desired value */
> > +       fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> > +       fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> > +       if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> > +               DRM_DEBUG_KMS("%s: Driver defined backlight frequency (%d)
> > out of range\n",
> > +                             aux->name, driver_pwm_freq_hz);
> > +               return 0;
> > +       }
> > +
> > +       for (pn = pn_max; pn >= pn_min; pn--) {
> > +               f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> > +               fxp_actual = f << pn;
> > +               if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> > +                       break;
> > +       }
> > +
> > +       ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, pn);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count:
> > %d\n", aux->name, ret);
> > +               return 0;
> > +       }
> > +       bl->pwmgen_bit_count = pn;
> > +       bl->max = (1 << pn) - 1;
> > +
> > +       if (edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) {
> > +               bl->pwm_freq_pre_divider = f;
> > +               DRM_DEBUG_KMS("%s: Using backlight frequency from driver
> > (%dHz)\n",
> > +                             aux->name, driver_pwm_freq_hz);
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static inline int
> > +drm_edp_backlight_probe_level(struct drm_dp_aux *aux, struct
> > drm_edp_backlight_info *bl,
> > +                             u8 *current_mode)
> > +{
> > +       int ret;
> > +       u8 buf[2];
> > +       u8 mode_reg;
> > +
> > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > &mode_reg);
> > +       if (ret != 1) {
> > +               DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n",
> > aux->name, ret);
> > +               return ret < 0 ? ret : -EIO;
> > +       }
> > +
> > +       *current_mode = (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK);
> > +       if (*current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > +               int size = 1 + bl->lsb_reg_used;
> > +
> > +               ret = drm_dp_dpcd_read(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> > buf, size);
> > +               if (ret != size) {
> > +                       DRM_DEBUG_KMS("%s: Failed to read backlight level:
> > %d\n", aux->name, ret);
> > +                       return ret < 0 ? ret : -EIO;
> > +               }
> > +
> > +               if (bl->lsb_reg_used)
> > +                       return (buf[0] << 8) | buf[1];
> > +               else
> > +                       return buf[0];
> > +       }
> > +
> > +       /*
> > +        * If we're not in DPCD control mode yet, the programmed brightness
> > value is meaningless and
> > +        * the driver should assume max brightness
> > +        */
> > +       return bl->max;
> > +}
> > +
> > +/**
> > + * drm_edp_backlight_init() - Probe a display panel's TCON using the
> > standard VESA eDP backlight
> > + * interface.
> > + * @aux: The DP aux device to use for probing
> > + * @bl: The &drm_edp_backlight_info struct to fill out with information on
> > the backlight
> > + * @driver_pwm_freq_hz: Optional PWM frequency from the driver in hz
> > + * @edp_dpcd: A cached copy of the eDP DPCD
> > + * @current_level: Where to store the probed brightness level
> > + * @current_mode: Where to store the currently set backlight control mode
> > + *
> > + * Initializes a &drm_edp_backlight_info struct by probing @aux for it's
> > backlight capabilities,
> > + * along with also probing the current and maximum supported brightness
> > levels.
> > + *
> > + * If @driver_pwm_freq_hz is non-zero, this will be used as the backlight
> > frequency. Otherwise, the
> > + * default frequency from the panel is used.
> > + *
> > + * Returns: %0 on success, negative error code on failure.
> > + */
> > +int
> > +drm_edp_backlight_init(struct drm_dp_aux *aux, struct
> > drm_edp_backlight_info *bl,
> > +                      u16 driver_pwm_freq_hz, const u8
> > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> > +                      u16 *current_level, u8 *current_mode)
> > +{
> > +       int ret;
> > +
> > +       if (edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
> > +               bl->aux_enable = true;
> > +       if (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> > +               bl->lsb_reg_used = true;
> > +
> > +       ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz,
> > edp_dpcd);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       ret = drm_edp_backlight_probe_level(aux, bl, current_mode);
> > +       if (ret < 0)
> > +               return ret;
> > +       *current_level = ret;
> > +
> > +       DRM_DEBUG_KMS("%s: Found backlight level=%d/%d
> > pwm_freq_pre_divider=%d mode=%x\n",
> > +                     aux->name, *current_level, bl->max, bl-
> > >pwm_freq_pre_divider, *current_mode);
> > +       DRM_DEBUG_KMS("%s: Backlight caps: pwmgen_bit_count=%d
> > lsb_reg_used=%d aux_enable=%d\n",
> > +                     aux->name, bl->pwmgen_bit_count, bl->lsb_reg_used, bl-
> > >aux_enable);
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL(drm_edp_backlight_init);
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 133c9cb742a7..82673e8f21c3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -257,11 +257,8 @@ struct intel_panel {
> >                 struct pwm_device *pwm;
> >                 struct pwm_state pwm_state;
> >  
> > -               /* DPCD backlight */
> > -               u8 pwmgen_bit_count;
> > -               u8 pwm_freq_pre_divider;
> > -
> >                 struct backlight_device *device;
> > +               struct drm_edp_backlight_info vesa_edp_info;
> >  
> >                 const struct intel_panel_bl_funcs *funcs;
> >                 void (*power)(struct intel_connector *, bool enable);
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > index 94ce5ca1affa..b1ebfd854a42 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > @@ -25,303 +25,73 @@
> >  #include "intel_display_types.h"
> >  #include "intel_dp_aux_backlight.h"
> >  
> > -static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool
> > enable)
> > -{
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > -       u8 reg_val = 0;
> > -
> > -       /* Early return when display use other mechanism to enable
> > backlight. */
> > -       if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
> > -               return;
> > -
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux,
> > DP_EDP_DISPLAY_CONTROL_REGISTER,
> > -                             &reg_val) < 0) {
> > -               drm_dbg_kms(&i915->drm, "Failed to read DPCD register
> > 0x%x\n",
> > -                           DP_EDP_DISPLAY_CONTROL_REGISTER);
> > -               return;
> > -       }
> > -       if (enable)
> > -               reg_val |= DP_EDP_BACKLIGHT_ENABLE;
> > -       else
> > -               reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
> > -
> > -       if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > DP_EDP_DISPLAY_CONTROL_REGISTER,
> > -                              reg_val) != 1) {
> > -               drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
> > -                           enable ? "enable" : "disable");
> > -       }
> > -}
> > -
> > -static bool intel_dp_aux_backlight_dpcd_mode(struct intel_connector
> > *connector)
> > -{
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > -       u8 mode_reg;
> > -
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux,
> > -                             DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > -                             &mode_reg) != 1) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Failed to read the DPCD register 0x%x\n",
> > -                           DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> > -               return false;
> > -       }
> > -
> > -       return (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
> > -              DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > -}
> > -
> > -/*
> > - * Read the current backlight value from DPCD register(s) based
> > - * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
> > - */
> >  static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
> >  {
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > -       u8 read_val[2] = { 0x0 };
> > -       u16 level = 0;
> > -
> > -       /*
> > -        * If we're not in DPCD control mode yet, the programmed brightness
> > -        * value is meaningless and we should assume max brightness
> > -        */
> > -       if (!intel_dp_aux_backlight_dpcd_mode(connector))
> > -               return connector->panel.backlight.max;
> > -
> > -       if (drm_dp_dpcd_read(&intel_dp->aux,
> > DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> > -                            &read_val, sizeof(read_val)) < 0) {
> > -               drm_dbg_kms(&i915->drm, "Failed to read DPCD register
> > 0x%x\n",
> > -                           DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> > -               return 0;
> > -       }
> > -       level = read_val[0];
> > -       if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> > -               level = (read_val[0] << 8 | read_val[1]);
> > -
> > -       return level;
> > +       return connector->panel.backlight.level;
> >  }
> >  
> > -/*
> > - * Sends the current backlight level over the aux channel, checking if its
> > using
> > - * 8-bit or 16 bit value (MSB and LSB)
> > - */
> >  static void
> > -intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state,
> > u32 level)
> > +intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state,
> > +                          u32 level)
> >  {
> >         struct intel_connector *connector = to_intel_connector(conn_state-
> > >connector);
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > -       u8 vals[2] = { 0x0 };
> > -
> > -       vals[0] = level;
> > +       struct intel_panel *panel = &connector->panel;
> > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> >  
> > -       /* Write the MSB and/or LSB */
> > -       if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> > {
> > -               vals[0] = (level & 0xFF00) >> 8;
> > -               vals[1] = (level & 0xFF);
> > -       }
> > -       if (drm_dp_dpcd_write(&intel_dp->aux,
> > DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> > -                             vals, sizeof(vals)) < 0) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Failed to write aux backlight level\n");
> > -               return;
> > -       }
> > +       drm_edp_backlight_set_level(&intel_dp->aux, &panel-
> > >backlight.vesa_edp_info, level);
> >  }
> >  
> > -static void intel_dp_aux_enable_backlight(const struct intel_crtc_state
> > *crtc_state,
> > -                                         const struct drm_connector_state
> > *conn_state)
> > +static void
> > +intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state,
> > +                             const struct drm_connector_state *conn_state)
> >  {
> >         struct intel_connector *connector = to_intel_connector(conn_state-
> > >connector);
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >         struct intel_panel *panel = &connector->panel;
> > -       u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
> > -
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux,
> > -                       DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1)
> > {
> > -               drm_dbg_kms(&i915->drm, "Failed to read DPCD register
> > 0x%x\n",
> > -                           DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> > -               return;
> > -       }
> > -
> > -       new_dpcd_buf = dpcd_buf;
> > -       edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> > -
> > -       switch (edp_backlight_mode) {
> > -       case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM:
> > -       case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET:
> > -       case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT:
> > -               new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> > -               new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > -
> > -               if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > -                                      DP_EDP_PWMGEN_BIT_COUNT,
> > -                                      panel->backlight.pwmgen_bit_count) <
> > 0)
> > -                       drm_dbg_kms(&i915->drm,
> > -                                   "Failed to write aux pwmgen bit
> > count\n");
> > -
> > -               break;
> > -
> > -       /* Do nothing when it is already DPCD mode */
> > -       case DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD:
> > -       default:
> > -               break;
> > -       }
> > -
> > -       if (panel->backlight.pwm_freq_pre_divider) {
> > -               if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > DP_EDP_BACKLIGHT_FREQ_SET,
> > -                                      panel-
> > >backlight.pwm_freq_pre_divider) == 1)
> > -                       new_dpcd_buf |=
> > DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> > -               else
> > -                       drm_dbg_kms(&i915->drm, "Failed to write aux
> > backlight frequency\n");
> > -       }
> > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> >  
> > -       if (new_dpcd_buf != dpcd_buf) {
> > -               if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > -                       DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) <
> > 0) {
> > -                       drm_dbg_kms(&i915->drm,
> > -                                   "Failed to write aux backlight mode\n");
> > -               }
> > -       }
> > -
> > -       intel_dp_aux_set_backlight(conn_state,
> > -                                  connector->panel.backlight.level);
> > -       set_aux_backlight_enable(intel_dp, true);
> > +       drm_edp_backlight_enable(&intel_dp->aux, &panel-
> > >backlight.vesa_edp_info,
> > +                                panel->backlight.level);
> >  }
> >  
> > -static void intel_dp_aux_disable_backlight(const struct drm_connector_state
> > *old_conn_state)
> > -{
> > -
> >        set_aux_backlight_enable(enc_to_intel_dp(to_intel_encoder(old_conn_sta
> > te->best_encoder)),
> > -                                false);
> > -}
> > -
> > -/*
> > - * Compute PWM frequency divider value based off the frequency provided to
> > us by the vbt.
> > - * The PWM Frequency is calculated as 27Mhz / (F x P).
> > - * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of
> > the
> > - *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> > - * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
> > - *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> > - */
> > -static u32 intel_dp_aux_calc_max_backlight(struct intel_connector
> > *connector)
> > +static void
> > +intel_dp_aux_disable_backlight(const struct drm_connector_state
> > *old_conn_state)
> >  {
> > -       struct drm_i915_private *i915 = to_i915(connector->base.dev);
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > +       struct intel_connector *connector =
> > to_intel_connector(old_conn_state->connector);
> >         struct intel_panel *panel = &connector->panel;
> > -       u32 max_backlight = 0;
> > -       int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> > -       u8 pn, pn_min, pn_max;
> > -
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn)
> > == 1) {
> > -               pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > -               max_backlight = (1 << pn) - 1;
> > -       }
> > -
> > -       /* Find desired value of (F x P)
> > -        * Note that, if F x P is out of supported range, the maximum value
> > or
> > -        * minimum value will applied automatically. So no need to check
> > that.
> > -        */
> > -       freq = i915->vbt.backlight.pwm_freq_hz;
> > -       drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
> > -                   freq);
> > -       if (!freq) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Use panel default backlight frequency\n");
> > -               return max_backlight;
> > -       }
> > -
> > -       fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
> > -
> > -       /* Use highest possible value of Pn for more granularity of
> > brightness
> > -        * adjustment while satifying the conditions below.
> > -        * - Pn is in the range of Pn_min and Pn_max
> > -        * - F is in the range of 1 and 255
> > -        * - FxP is within 25% of desired value.
> > -        *   Note: 25% is arbitrary value and may need some tweak.
> > -        */
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux,
> > -                             DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) !=
> > 1) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Failed to read pwmgen bit count cap min\n");
> > -               return max_backlight;
> > -       }
> > -       if (drm_dp_dpcd_readb(&intel_dp->aux,
> > -                             DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) !=
> > 1) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Failed to read pwmgen bit count cap max\n");
> > -               return max_backlight;
> > -       }
> > -       pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > -       pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> >  
> > -       /* Ensure frequency is within 25% of desired value */
> > -       fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> > -       fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> > -
> > -       if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "VBT defined backlight frequency out of
> > range\n");
> > -               return max_backlight;
> > -       }
> > -
> > -       for (pn = pn_max; pn >= pn_min; pn--) {
> > -               f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> > -               fxp_actual = f << pn;
> > -               if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> > -                       break;
> > -       }
> > -
> > -       drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
> > -       if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > -                              DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
> > -               drm_dbg_kms(&i915->drm,
> > -                           "Failed to write aux pwmgen bit count\n");
> > -               return max_backlight;
> > -       }
> > -
> > -       panel->backlight.pwmgen_bit_count = pn;
> > -       panel->backlight.pwm_freq_pre_divider = f;
> > -
> > -       max_backlight = (1 << pn) - 1;
> > -
> > -       return max_backlight;
> > +       drm_edp_backlight_disable(&intel_dp->aux, &panel-
> > >backlight.vesa_edp_info);
> >  }
> >  
> >  static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
> >                                         enum pipe pipe)
> >  {
> >         struct intel_panel *panel = &connector->panel;
> > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> > +       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > +       u16 current_level;
> > +       u8 current_mode;
> > +       int ret;
> >  
> > -       panel->backlight.max = intel_dp_aux_calc_max_backlight(connector);
> > -       if (!panel->backlight.max)
> > -               return -ENODEV;
> > +       ret = drm_edp_backlight_init(&intel_dp->aux, &panel-
> > >backlight.vesa_edp_info,
> > +                                    i915->vbt.backlight.pwm_freq_hz,
> > intel_dp->edp_dpcd,
> > +                                    &current_level, &current_mode);
> > +       if (ret < 0)
> > +               return ret;
> >  
> > +       panel->backlight.max = panel->backlight.vesa_edp_info.max;
> >         panel->backlight.min = 0;
> > -       panel->backlight.level = intel_dp_aux_get_backlight(connector);
> > -       panel->backlight.enabled =
> > intel_dp_aux_backlight_dpcd_mode(connector) &&
> > -                                  panel->backlight.level != 0;
> > +       if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > +               panel->backlight.level = current_level;
> > +               panel->backlight.enabled = panel->backlight.level != 0;
> > +       } else {
> > +               panel->backlight.level = panel->backlight.max;
> > +               panel->backlight.enabled = false;
> > +       }
> >  
> >         return 0;
> >  }
> >  
> > -static bool
> > -intel_dp_aux_display_control_capable(struct intel_connector *connector)
> > -{
> > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > -
> > -       /* Check the eDP Display control capabilities registers to determine
> > if
> > -        * the panel can support backlight control over the aux channel
> > -        */
> > -       if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
> > -           (intel_dp->edp_dpcd[2] &
> > DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
> > -               drm_dbg_kms(&i915->drm, "AUX Backlight Control
> > Supported!\n");
> > -               return true;
> > -       }
> > -       return false;
> > -}
> > -
> >  static const struct intel_panel_bl_funcs intel_dp_bl_funcs = {
> >         .setup = intel_dp_aux_setup_backlight,
> >         .enable = intel_dp_aux_enable_backlight,
> > @@ -337,9 +107,11 @@ int intel_dp_aux_init_backlight_funcs(struct
> > intel_connector *intel_connector)
> >         struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >  
> >         if (i915->params.enable_dpcd_backlight == 0 ||
> > -           !intel_dp_aux_display_control_capable(intel_connector))
> > +           !drm_edp_backlight_supported(intel_dp->edp_dpcd))
> >                 return -ENODEV;
> >  
> > +       drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
> > +
> >         /*
> >          * There are a lot of machines that don't advertise the backlight
> >          * control interface to use properly in their VBIOS, :\
> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > index 6b40258927bf..082fb832d4f6 100644
> > --- a/include/drm/drm_dp_helper.h
> > +++ b/include/drm/drm_dp_helper.h
> > @@ -1598,6 +1598,24 @@ drm_dp_sink_can_do_video_without_timing_msa(const u8
> > dpcd[DP_RECEIVER_CAP_SIZE])
> >                 DP_MSA_TIMING_PAR_IGNORED;
> >  }
> >  
> > +/**
> > + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight
> > support
> > + * @edp_dpcd: The DPCD to check
> > + *
> > + * Note that currently this function will return %false for panels which
> > support various DPCD
> > + * backlight features but which require the brightness be set through PWM,
> > and don't support setting
> > + * the brightness level via the DPCD. This is a TODO.
> > + *
> > + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are
> > supported, %false
> > + * otherwise
> > + */
> > +static inline bool
> > +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> > +{
> > +       return (edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
> > +               (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP);
> > +}
> > +
> >  /*
> >   * DisplayPort AUX channel
> >   */
> > @@ -1912,6 +1930,36 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, u32
> > edid_quirks,
> >         return (desc->quirks | edid_quirks) & BIT(quirk);
> >  }
> >  
> > +/**
> > + * struct drm_edp_backlight_info - Probed eDP backlight info struct
> > + * @pwmgen_bit_count: The pwmgen bit count
> > + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used
> > for this backlight, if any
> > + * @max: The maximum backlight level that may be set
> > + * @lsb_reg_used: Do we also write values to the
> > DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register?
> > + * @aux_enable: Does the panel support the AUX enable cap?
> > + *
> > + * This structure contains various data about an eDP backlight, which can
> > be populated by using
> > + * drm_edp_backlight_init().
> > + */
> > +struct drm_edp_backlight_info {
> > +       u8 pwmgen_bit_count;
> > +       u8 pwm_freq_pre_divider;
> > +       u16 max;
> > +
> > +       bool lsb_reg_used : 1;
> > +       bool aux_enable : 1;
> > +};
> > +
> > +int
> > +drm_edp_backlight_init(struct drm_dp_aux *aux, struct
> > drm_edp_backlight_info *bl,
> > +                      u16 driver_pwm_freq_hz, const u8
> > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> > +                      u16 *current_level, u8 *current_mode);
> > +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl,
> > +                               u16 level);
> > +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl,
> > +                            u16 level);
> > +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct
> > drm_edp_backlight_info *bl);
> > +
> >  #ifdef CONFIG_DRM_DP_CEC
> >  void drm_dp_cec_irq(struct drm_dp_aux *aux);
> >  void drm_dp_cec_register_connector(struct drm_dp_aux *aux,
> 

-- 
Sincerely,
   Lyude Paul (she/her)
   Software Engineer at Red Hat
   
Note: I deal with a lot of emails and have a lot of bugs on my plate. If you've
asked me a question, are waiting for a review/merge on a patch, etc. and I
haven't responded in a while, please feel free to send me another email to check
on my status. I don't bite!

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [RFC 5/5] drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau

[Lyude Paul]

This adds support for controlling panel backlights over eDP using VESA's
standard backlight control interface. Luckily, Nvidia was cool enough to
never come up with their own proprietary backlight control interface (at
least, not any that I or the laptop manufacturers I've talked to are aware
of), so this should work for any laptop panels which support the VESA
backlight control interface.

Note that we don't yet provide the panel backlight frequency to the DRM DP
backlight helpers. This should be fine for the time being, since it's not
required to get basic backlight controls working.

For reference: there's some mentions of PWM backlight values in
nouveau_reg.h, but I'm not sure these are the values we would want to use.
If we figure out how to get this information in the future, we'll have the
benefit of more granular backlight control.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
---
 drivers/gpu/drm/nouveau/dispnv50/disp.c     |  30 +++-
 drivers/gpu/drm/nouveau/nouveau_backlight.c | 166 ++++++++++++++++++--
 drivers/gpu/drm/nouveau/nouveau_connector.h |   9 +-
 drivers/gpu/drm/nouveau/nouveau_encoder.h   |   1 +
 4 files changed, 187 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index 33fff388dd83..fbc1665afc68 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -31,6 +31,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/hdmi.h>
 #include <linux/component.h>
+#include <linux/iopoll.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -1615,23 +1616,38 @@ nv50_sor_update(struct nouveau_encoder *nv_encoder, u8 head,
 	core->func->sor->ctrl(core, nv_encoder->or, nv_encoder->ctrl, asyh);
 }
 
+/* TODO: Should we extend this to PWM-only backlights?
+ * As well, should we add a DRM helper for waiting for the backlight to acknowledge
+ * the panel backlight has been shut off? Intel doesn't seem to do this, and uses a
+ * fixed time delay from the vbios…
+ */
 static void
 nv50_sor_disable(struct drm_encoder *encoder,
 		 struct drm_atomic_state *state)
 {
 	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct nouveau_drm *drm = nouveau_drm(nv_encoder->base.base.dev);
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(nv_encoder->crtc);
 	struct nouveau_connector *nv_connector =
 		nv50_outp_get_old_connector(nv_encoder, state);
+	int ret;
 
 	nv_encoder->crtc = NULL;
 
 	if (nv_crtc) {
 		struct drm_dp_aux *aux = &nv_connector->aux;
+		struct nouveau_backlight *backlight = nv_connector->backlight;
 		u8 pwr;
 
+		if (backlight && backlight->uses_dpcd) {
+			ret = drm_edp_backlight_disable(aux, &backlight->edp_info);
+			if (ret < 0)
+				NV_ERROR(drm, "Failed to disable backlight on [CONNECTOR:%d:%s]: %d\n",
+					 nv_connector->base.base.id, nv_connector->base.name, ret);
+		}
+
 		if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
-			int ret = drm_dp_dpcd_readb(aux, DP_SET_POWER, &pwr);
+			ret = drm_dp_dpcd_readb(aux, DP_SET_POWER, &pwr);
 
 			if (ret == 0) {
 				pwr &= ~DP_SET_POWER_MASK;
@@ -1667,6 +1683,9 @@ nv50_sor_enable(struct drm_encoder *encoder, struct drm_atomic_state *state)
 	struct drm_device *dev = encoder->dev;
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nouveau_connector *nv_connector;
+#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
+	struct nouveau_backlight *backlight;
+#endif
 	struct nvbios *bios = &drm->vbios;
 	bool hda = false;
 	u8 proto = NV507D_SOR_SET_CONTROL_PROTOCOL_CUSTOM;
@@ -1741,6 +1760,14 @@ nv50_sor_enable(struct drm_encoder *encoder, struct drm_atomic_state *state)
 			proto = NV887D_SOR_SET_CONTROL_PROTOCOL_DP_B;
 
 		nv50_audio_enable(encoder, state, mode);
+
+#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
+		backlight = nv_connector->backlight;
+		if (backlight && backlight->uses_dpcd)
+			drm_edp_backlight_enable(&nv_connector->aux, &backlight->edp_info,
+						 (u16)backlight->dev->props.brightness);
+#endif
+
 		break;
 	default:
 		BUG();
@@ -2263,6 +2290,7 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state)
 	nv50_crc_atomic_start_reporting(state);
 	if (!flushed)
 		nv50_crc_atomic_release_notifier_contexts(state);
+
 	drm_atomic_helper_commit_hw_done(state);
 	drm_atomic_helper_cleanup_planes(dev, state);
 	drm_atomic_helper_commit_cleanup_done(state);
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 4acc5be5e9aa..be1669e609f0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -42,11 +42,6 @@
 static struct ida bl_ida;
 #define BL_NAME_SIZE 15 // 12 for name + 2 for digits + 1 for '\0'
 
-struct nouveau_backlight {
-	struct backlight_device *dev;
-	int id;
-};
-
 static bool
 nouveau_get_backlight_name(char backlight_name[BL_NAME_SIZE],
 			   struct nouveau_backlight *bl)
@@ -147,6 +142,98 @@ static const struct backlight_ops nv50_bl_ops = {
 	.update_status = nv50_set_intensity,
 };
 
+/*
+ * eDP brightness callbacks need to happen under lock, since we need to
+ * enable/disable the backlight ourselves for modesets
+ */
+static int
+nv50_edp_get_brightness(struct backlight_device *bd)
+{
+	struct drm_connector *connector = dev_get_drvdata(bd->dev.parent);
+	struct drm_device *dev = connector->dev;
+	struct drm_crtc *crtc;
+	struct drm_modeset_acquire_ctx ctx;
+	int ret = 0;
+
+	drm_modeset_acquire_init(&ctx, 0);
+
+retry:
+	ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
+	if (ret == -EDEADLK)
+		goto deadlock;
+	else if (ret < 0)
+		goto out;
+
+	crtc = connector->state->crtc;
+	if (!crtc)
+		goto out;
+
+	ret = drm_modeset_lock(&crtc->mutex, &ctx);
+	if (ret == -EDEADLK)
+		goto deadlock;
+	else if (ret < 0)
+		goto out;
+
+	if (!crtc->state->active)
+		goto out;
+
+	ret = bd->props.brightness;
+out:
+	drm_modeset_drop_locks(&ctx);
+	drm_modeset_acquire_fini(&ctx);
+	return ret;
+deadlock:
+	drm_modeset_backoff(&ctx);
+	goto retry;
+}
+
+static int
+nv50_edp_set_brightness(struct backlight_device *bd)
+{
+	struct drm_connector *connector = dev_get_drvdata(bd->dev.parent);
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct drm_device *dev = connector->dev;
+	struct drm_crtc *crtc;
+	struct drm_dp_aux *aux = &nv_connector->aux;
+	struct nouveau_backlight *nv_bl = nv_connector->backlight;
+	struct drm_modeset_acquire_ctx ctx;
+	int ret = 0;
+
+	drm_modeset_acquire_init(&ctx, 0);
+retry:
+	ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
+	if (ret == -EDEADLK)
+		goto deadlock;
+	else if (ret < 0)
+		goto out;
+
+	crtc = connector->state->crtc;
+	if (!crtc)
+		goto out;
+
+	ret = drm_modeset_lock(&crtc->mutex, &ctx);
+	if (ret == -EDEADLK)
+		goto deadlock;
+	else if (ret < 0)
+		goto out;
+
+	if (crtc->state->active)
+		ret = drm_edp_backlight_set_level(aux, &nv_bl->edp_info, bd->props.brightness);
+
+out:
+	drm_modeset_drop_locks(&ctx);
+	drm_modeset_acquire_fini(&ctx);
+	return ret;
+deadlock:
+	drm_modeset_backoff(&ctx);
+	goto retry;
+}
+
+static const struct backlight_ops nv50_edp_bl_ops = {
+	.get_brightness = nv50_edp_get_brightness,
+	.update_status = nv50_edp_set_brightness,
+};
+
 static int
 nva3_get_intensity(struct backlight_device *bd)
 {
@@ -193,8 +280,13 @@ static const struct backlight_ops nva3_bl_ops = {
 	.update_status = nva3_set_intensity,
 };
 
+/* FIXME: perform backlight probing for eDP _before_ this, this only gets called after connector
+ * registration which happens after the initial modeset
+ */
 static int
-nv50_backlight_init(struct nouveau_encoder *nv_encoder,
+nv50_backlight_init(struct nouveau_backlight *bl,
+		    struct nouveau_connector *nv_conn,
+		    struct nouveau_encoder *nv_encoder,
 		    struct backlight_properties *props,
 		    const struct backlight_ops **ops)
 {
@@ -204,6 +296,41 @@ nv50_backlight_init(struct nouveau_encoder *nv_encoder,
 	if (!nvif_rd32(device, NV50_PDISP_SOR_PWM_CTL(ffs(nv_encoder->dcb->or) - 1)))
 		return -ENODEV;
 
+	if (nv_conn->type == DCB_CONNECTOR_eDP) {
+		int ret;
+		u16 current_level;
+		u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
+		u8 current_mode;
+
+		ret = drm_dp_dpcd_read(&nv_conn->aux, DP_EDP_DPCD_REV, edp_dpcd,
+				       EDP_DISPLAY_CTL_CAP_SIZE);
+		if (ret < 0)
+			return ret;
+
+		if (drm_edp_backlight_supported(edp_dpcd)) {
+			NV_DEBUG(drm, "DPCD backlight controls supported on %s\n",
+				 nv_conn->base.name);
+
+			ret = drm_edp_backlight_init(&nv_conn->aux, &bl->edp_info, 0, edp_dpcd,
+						     &current_level, &current_mode);
+			if (ret < 0)
+				return ret;
+
+			ret = drm_edp_backlight_enable(&nv_conn->aux, &bl->edp_info, current_level);
+			if (ret < 0) {
+				NV_ERROR(drm, "Failed to enable backlight on %s: %d\n",
+					 nv_conn->base.name, ret);
+				return ret;
+			}
+
+			*ops = &nv50_edp_bl_ops;
+			props->brightness = current_level;
+			props->max_brightness = bl->edp_info.max;
+			bl->uses_dpcd = true;
+			return 0;
+		}
+	}
+
 	if (drm->client.device.info.chipset <= 0xa0 ||
 	    drm->client.device.info.chipset == 0xaa ||
 	    drm->client.device.info.chipset == 0xac)
@@ -243,6 +370,10 @@ nouveau_backlight_init(struct drm_connector *connector)
 	if (!nv_encoder)
 		return 0;
 
+	bl = kzalloc(sizeof(*bl), GFP_KERNEL);
+	if (!bl)
+		return -ENOMEM;
+
 	switch (device->info.family) {
 	case NV_DEVICE_INFO_V0_CURIE:
 		ret = nv40_backlight_init(nv_encoder, &props, &ops);
@@ -254,20 +385,19 @@ nouveau_backlight_init(struct drm_connector *connector)
 	case NV_DEVICE_INFO_V0_PASCAL:
 	case NV_DEVICE_INFO_V0_VOLTA:
 	case NV_DEVICE_INFO_V0_TURING:
-		ret = nv50_backlight_init(nv_encoder, &props, &ops);
+		ret = nv50_backlight_init(bl, nouveau_connector(connector),
+					  nv_encoder, &props, &ops);
 		break;
 	default:
-		return 0;
+		ret = 0;
+		goto fail_alloc;
 	}
 
-	if (ret == -ENODEV)
-		return 0;
-	else if (ret)
-		return ret;
-
-	bl = kzalloc(sizeof(*bl), GFP_KERNEL);
-	if (!bl)
-		return -ENOMEM;
+	if (ret) {
+		if (ret == -ENODEV)
+			ret = 0;
+		goto fail_alloc;
+	}
 
 	if (!nouveau_get_backlight_name(backlight_name, bl)) {
 		NV_ERROR(drm, "Failed to retrieve a unique name for the backlight interface\n");
@@ -284,7 +414,9 @@ nouveau_backlight_init(struct drm_connector *connector)
 	}
 
 	nouveau_connector(connector)->backlight = bl;
-	bl->dev->props.brightness = bl->dev->ops->get_brightness(bl->dev);
+	if (!bl->dev->props.brightness)
+		bl->dev->props.brightness =
+			bl->dev->ops->get_brightness(bl->dev);
 	backlight_update_status(bl->dev);
 
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h
index d0b859c4a80e..40f90e353540 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.h
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
@@ -46,7 +46,14 @@ struct nvkm_i2c_port;
 struct dcb_output;
 
 #ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
-struct nouveau_backlight;
+struct nouveau_backlight {
+	struct backlight_device *dev;
+
+	struct drm_edp_backlight_info edp_info;
+	bool uses_dpcd : 1;
+
+	int id;
+};
 #endif
 
 #define nouveau_conn_atom(p)                                                   \
diff --git a/drivers/gpu/drm/nouveau/nouveau_encoder.h b/drivers/gpu/drm/nouveau/nouveau_encoder.h
index 21937f1c7dd9..8be4b014b471 100644
--- a/drivers/gpu/drm/nouveau/nouveau_encoder.h
+++ b/drivers/gpu/drm/nouveau/nouveau_encoder.h
@@ -30,6 +30,7 @@
 #include <subdev/bios/dcb.h>
 
 #include <drm/drm_encoder_slave.h>
+#include <drm/drm_dp_helper.h>
 #include <drm/drm_dp_mst_helper.h>
 #include "dispnv04/disp.h"
 struct nv50_head_atom;
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
07863bf5240e drm/nouveau/kms/nv40-/backlight: Assign prop type once
-:7: WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one

total: 0 errors, 1 warnings, 0 checks, 22 lines checked
7f296e14de0e drm/nouveau/kms: Don't probe eDP connectors more then once
-:6: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#6: 
eDP doesn't do hotplugging, so there's no reason for us to reprobe it (unless a

-:23: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#23: FILE: drivers/gpu/drm/nouveau/nouveau_connector.c:558:
+	if (nv_connector->type == DCB_CONNECTOR_eDP &&

total: 0 errors, 1 warnings, 1 checks, 12 lines checked
96683b747a78 drm/i915/dp: Remove redundant AUX backlight frequency calculations
1504918e919d drm/dp: Extract i915's eDP backlight code into DRM helpers
5357fe99e438 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
-:247: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#247: FILE: drivers/gpu/drm/nouveau/nouveau_backlight.c:299:
+	if (nv_conn->type == DCB_CONNECTOR_eDP) {

total: 0 errors, 0 warnings, 1 checks, 311 lines checked


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim sparse --fast origin/drm-tip
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
-
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16: error: incompatible types in comparison expression (different type sizes):
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:274:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:274:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:274:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:275:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:275:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:275:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:330:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:330:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:330:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c:142:1: warning: no newline at end of file
+drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:92:56: error: marked inline, but without a definition
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error:


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.DOCS: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ make htmldocs 2>&1 > /dev/null | grep i915
Error: Cannot open file ./drivers/gpu/drm/i915/gt/intel_lrc.c
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 1.7.9 -function Logical Rings, Logical Ring Contexts and Execlists ./drivers/gpu/drm/i915/gt/intel_lrc.c' failed with return code 1


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 2327 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau
URL   : https://patchwork.freedesktop.org/series/84754/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9467 -> Patchwork_19103
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/index.html

Known issues
------------

  Here are the changes found in Patchwork_19103 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@fbdev@read:
    - fi-tgl-y:           [PASS][1] -> [DMESG-WARN][2] ([i915#402]) +1 similar issue
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/fi-tgl-y/igt@fbdev@read.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/fi-tgl-y/igt@fbdev@read.html

  
#### Possible fixes ####

  * igt@prime_vgem@basic-userptr:
    - fi-tgl-y:           [DMESG-WARN][3] ([i915#402]) -> [PASS][4]
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/fi-tgl-y/igt@prime_vgem@basic-userptr.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/fi-tgl-y/igt@prime_vgem@basic-userptr.html

  
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402


Participating hosts (43 -> 40)
------------------------------

  Missing    (3): fi-ilk-m540 fi-bdw-samus fi-hsw-4200u 


Build changes
-------------

  * Linux: CI_DRM_9467 -> Patchwork_19103

  CI-20190529: 20190529
  CI_DRM_9467: 97bdde324e46e276a88de5d2d0c759b4309173c6 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5886: c65fd1fbc26e9f65756d130d33b0ed56bc8faec7 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19103: 5357fe99e43812c80f0d03093fb27e9b4728ba98 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

5357fe99e438 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
1504918e919d drm/dp: Extract i915's eDP backlight code into DRM helpers
96683b747a78 drm/i915/dp: Remove redundant AUX backlight frequency calculations
7f296e14de0e drm/nouveau/kms: Don't probe eDP connectors more then once
07863bf5240e drm/nouveau/kms/nv40-/backlight: Assign prop type once

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/index.html

[-- Attachment #1.2: Type: text/html, Size: 3037 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.IGT: failure for drm: Extract DPCD backlight helpers from i915, add support in nouveau

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 15633 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau
URL   : https://patchwork.freedesktop.org/series/84754/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9467_full -> Patchwork_19103_full
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_19103_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_19103_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_19103_full:

### IGT changes ###

#### Possible regressions ####

  * igt@gem_exec_whisper@basic-queues-all:
    - shard-iclb:         [PASS][1] -> [INCOMPLETE][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-iclb3/igt@gem_exec_whisper@basic-queues-all.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@gem_exec_whisper@basic-queues-all.html

  
Known issues
------------

  Here are the changes found in Patchwork_19103_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@feature_discovery@psr2:
    - shard-iclb:         [PASS][3] -> [SKIP][4] ([i915#658])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-iclb2/igt@feature_discovery@psr2.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb7/igt@feature_discovery@psr2.html

  * igt@gem_userptr_blits@readonly-pwrite-unsync:
    - shard-iclb:         NOTRUN -> [SKIP][5] ([fdo#110426] / [i915#1704])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@gem_userptr_blits@readonly-pwrite-unsync.html

  * igt@i915_selftest@live@active:
    - shard-skl:          [PASS][6] -> [DMESG-FAIL][7] ([i915#2291] / [i915#666])
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl8/igt@i915_selftest@live@active.html
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl1/igt@i915_selftest@live@active.html

  * igt@kms_big_fb@yf-tiled-64bpp-rotate-0:
    - shard-iclb:         NOTRUN -> [SKIP][8] ([fdo#110723])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_big_fb@yf-tiled-64bpp-rotate-0.html

  * igt@kms_ccs@pipe-c-crc-primary-basic:
    - shard-skl:          NOTRUN -> [SKIP][9] ([fdo#109271] / [fdo#111304])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl2/igt@kms_ccs@pipe-c-crc-primary-basic.html

  * igt@kms_color_chamelium@pipe-c-gamma:
    - shard-skl:          NOTRUN -> [SKIP][10] ([fdo#109271] / [fdo#111827])
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl9/igt@kms_color_chamelium@pipe-c-gamma.html

  * igt@kms_color_chamelium@pipe-invalid-ctm-matrix-sizes:
    - shard-iclb:         NOTRUN -> [SKIP][11] ([fdo#109284] / [fdo#111827]) +2 similar issues
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_color_chamelium@pipe-invalid-ctm-matrix-sizes.html

  * igt@kms_content_protection@srm:
    - shard-iclb:         NOTRUN -> [SKIP][12] ([fdo#109300] / [fdo#111066])
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_content_protection@srm.html

  * igt@kms_cursor_crc@pipe-a-cursor-256x256-offscreen:
    - shard-skl:          NOTRUN -> [FAIL][13] ([i915#54])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl2/igt@kms_cursor_crc@pipe-a-cursor-256x256-offscreen.html

  * igt@kms_cursor_crc@pipe-a-cursor-256x85-offscreen:
    - shard-skl:          [PASS][14] -> [FAIL][15] ([i915#54]) +1 similar issue
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl8/igt@kms_cursor_crc@pipe-a-cursor-256x85-offscreen.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl9/igt@kms_cursor_crc@pipe-a-cursor-256x85-offscreen.html

  * igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
    - shard-skl:          NOTRUN -> [FAIL][16] ([i915#2346])
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl2/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions.html

  * igt@kms_flip@2x-flip-vs-wf_vblank-interruptible:
    - shard-iclb:         NOTRUN -> [SKIP][17] ([fdo#109274]) +3 similar issues
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_flip@2x-flip-vs-wf_vblank-interruptible.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2:
    - shard-glk:          [PASS][18] -> [FAIL][19] ([i915#79]) +1 similar issue
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-glk7/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2.html
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-glk5/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2.html

  * igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
    - shard-kbl:          [PASS][20] -> [DMESG-WARN][21] ([i915#180]) +2 similar issues
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-kbl3/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-kbl3/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html

  * igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-pwrite:
    - shard-skl:          NOTRUN -> [SKIP][22] ([fdo#109271]) +23 similar issues
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl2/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-pwrite.html

  * igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-spr-indfb-draw-mmap-cpu:
    - shard-iclb:         NOTRUN -> [SKIP][23] ([fdo#109280]) +5 similar issues
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-spr-indfb-draw-mmap-cpu.html

  * igt@kms_hdr@bpc-switch-suspend:
    - shard-skl:          [PASS][24] -> [FAIL][25] ([i915#1188])
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl3/igt@kms_hdr@bpc-switch-suspend.html
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl7/igt@kms_hdr@bpc-switch-suspend.html

  * igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
    - shard-skl:          NOTRUN -> [FAIL][26] ([fdo#108145] / [i915#265])
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl9/igt@kms_plane_alpha_blend@pipe-b-alpha-basic.html

  * igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
    - shard-skl:          [PASS][27] -> [FAIL][28] ([fdo#108145] / [i915#265])
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl6/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl4/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html

  * igt@kms_plane_cursor@pipe-d-primary-size-128:
    - shard-iclb:         NOTRUN -> [SKIP][29] ([fdo#109278]) +5 similar issues
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_plane_cursor@pipe-d-primary-size-128.html

  * igt@kms_psr@psr2_cursor_plane_onoff:
    - shard-iclb:         NOTRUN -> [SKIP][30] ([fdo#109441])
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_psr@psr2_cursor_plane_onoff.html

  * igt@kms_psr@psr2_primary_mmap_cpu:
    - shard-iclb:         [PASS][31] -> [SKIP][32] ([fdo#109441]) +1 similar issue
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb7/igt@kms_psr@psr2_primary_mmap_cpu.html

  * igt@nouveau_crc@pipe-d-source-rg:
    - shard-iclb:         NOTRUN -> [SKIP][33] ([fdo#109278] / [i915#2530])
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@nouveau_crc@pipe-d-source-rg.html

  * igt@perf@per-context-mode-unprivileged:
    - shard-iclb:         NOTRUN -> [SKIP][34] ([fdo#109289]) +1 similar issue
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@perf@per-context-mode-unprivileged.html

  * igt@prime_vgem@fence-flip-hang:
    - shard-iclb:         NOTRUN -> [SKIP][35] ([fdo#109295])
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@prime_vgem@fence-flip-hang.html

  
#### Possible fixes ####

  * igt@kms_color@pipe-a-gamma:
    - shard-tglb:         [FAIL][36] ([i915#1149]) -> [PASS][37]
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-tglb8/igt@kms_color@pipe-a-gamma.html
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-tglb8/igt@kms_color@pipe-a-gamma.html

  * igt@kms_cursor_crc@pipe-b-cursor-64x21-offscreen:
    - shard-skl:          [FAIL][38] ([i915#54]) -> [PASS][39] +4 similar issues
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl6/igt@kms_cursor_crc@pipe-b-cursor-64x21-offscreen.html
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl4/igt@kms_cursor_crc@pipe-b-cursor-64x21-offscreen.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@c-dp1:
    - shard-kbl:          [FAIL][40] ([i915#79]) -> [PASS][41]
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-kbl6/igt@kms_flip@flip-vs-expired-vblank-interruptible@c-dp1.html
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-kbl4/igt@kms_flip@flip-vs-expired-vblank-interruptible@c-dp1.html

  * igt@kms_flip@flip-vs-expired-vblank@a-edp1:
    - shard-tglb:         [FAIL][42] ([i915#2598]) -> [PASS][43]
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-tglb1/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-tglb5/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
    - shard-snb:          [SKIP][44] ([fdo#109271]) -> [PASS][45] +1 similar issue
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-snb6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-snb5/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [FAIL][46] ([fdo#108145] / [i915#265]) -> [PASS][47] +2 similar issues
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl1/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl2/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr@psr2_sprite_blt:
    - shard-iclb:         [SKIP][48] ([fdo#109441]) -> [PASS][49] +2 similar issues
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-iclb1/igt@kms_psr@psr2_sprite_blt.html
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb2/igt@kms_psr@psr2_sprite_blt.html

  * igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend:
    - shard-iclb:         [INCOMPLETE][50] ([i915#1185]) -> [PASS][51]
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-iclb3/igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend.html
   [51]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-iclb6/igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend.html

  
#### Warnings ####

  * igt@i915_suspend@fence-restore-tiled2untiled:
    - shard-kbl:          [DMESG-WARN][52] -> [INCOMPLETE][53] ([i915#155] / [i915#794])
   [52]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-kbl7/igt@i915_suspend@fence-restore-tiled2untiled.html
   [53]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-kbl6/igt@i915_suspend@fence-restore-tiled2untiled.html

  * igt@runner@aborted:
    - shard-skl:          ([FAIL][54], [FAIL][55]) ([i915#1814] / [i915#2029] / [i915#2295] / [i915#2722]) -> [FAIL][56] ([i915#2295] / [i915#2722])
   [54]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl3/igt@runner@aborted.html
   [55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9467/shard-skl2/igt@runner@aborted.html
   [56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/shard-skl6/igt@runner@aborted.html

  
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
  [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
  [fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
  [fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
  [fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
  [fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
  [fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#110426]: https://bugs.freedesktop.org/show_bug.cgi?id=110426
  [fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
  [fdo#111066]: https://bugs.freedesktop.org/show_bug.cgi?id=111066
  [fdo#111304]: https://bugs.freedesktop.org/show_bug.cgi?id=111304
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1149]: https://gitlab.freedesktop.org/drm/intel/issues/1149
  [i915#1185]: https://gitlab.freedesktop.org/drm/intel/issues/1185
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
  [i915#1704]: https://gitlab.freedesktop.org/drm/intel/issues/1704
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
  [i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
  [i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
  [i915#2295]: https://gitlab.freedesktop.org/drm/intel/issues/2295
  [i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
  [i915#2530]: https://gitlab.freedesktop.org/drm/intel/issues/2530
  [i915#2598]: https://gitlab.freedesktop.org/drm/intel/issues/2598
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
  [i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
  [i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
  [i915#666]: https://gitlab.freedesktop.org/drm/intel/issues/666
  [i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
  [i915#794]: https://gitlab.freedesktop.org/drm/intel/issues/794


Participating hosts (10 -> 10)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * Linux: CI_DRM_9467 -> Patchwork_19103

  CI-20190529: 20190529
  CI_DRM_9467: 97bdde324e46e276a88de5d2d0c759b4309173c6 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5886: c65fd1fbc26e9f65756d130d33b0ed56bc8faec7 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19103: 5357fe99e43812c80f0d03093fb27e9b4728ba98 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19103/index.html

[-- Attachment #1.2: Type: text/html, Size: 18168 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
346d389548f8 drm/nouveau/kms/nv40-/backlight: Assign prop type once
-:7: WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one

total: 0 errors, 1 warnings, 0 checks, 22 lines checked
5c960bc872b2 drm/nouveau/kms: Don't probe eDP connectors more then once
-:6: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#6: 
eDP doesn't do hotplugging, so there's no reason for us to reprobe it (unless a

-:23: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#23: FILE: drivers/gpu/drm/nouveau/nouveau_connector.c:558:
+	if (nv_connector->type == DCB_CONNECTOR_eDP &&

total: 0 errors, 1 warnings, 1 checks, 12 lines checked
f1d7c4b52e52 drm/i915/dp: Remove redundant AUX backlight frequency calculations
a50b774542f6 drm/dp: Extract i915's eDP backlight code into DRM helpers
6f41a076ae11 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
-:247: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#247: FILE: drivers/gpu/drm/nouveau/nouveau_backlight.c:299:
+	if (nv_conn->type == DCB_CONNECTOR_eDP) {

total: 0 errors, 0 warnings, 1 checks, 311 lines checked


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim sparse --fast origin/drm-tip
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
-
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16: error: incompatible types in comparison expression (different type sizes):
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:92:56: error: marked inline, but without a definition
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/a


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.DOCS: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ make htmldocs 2>&1 > /dev/null | grep i915
Error: Cannot open file ./drivers/gpu/drm/i915/gt/intel_lrc.c
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 1.7.9 -function Logical Rings, Logical Ring Contexts and Execlists ./drivers/gpu/drm/i915/gt/intel_lrc.c' failed with return code 1


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 4946 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)
URL   : https://patchwork.freedesktop.org/series/84754/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9471 -> Patchwork_19112
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/index.html

Known issues
------------

  Here are the changes found in Patchwork_19112 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@core_hotunplug@unbind-rebind:
    - fi-kbl-7500u:       [PASS][1] -> [DMESG-WARN][2] ([i915#2605]) +1 similar issue
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-kbl-7500u/igt@core_hotunplug@unbind-rebind.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-kbl-7500u/igt@core_hotunplug@unbind-rebind.html

  * igt@vgem_basic@create:
    - fi-tgl-y:           [PASS][3] -> [DMESG-WARN][4] ([i915#402]) +1 similar issue
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-tgl-y/igt@vgem_basic@create.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-tgl-y/igt@vgem_basic@create.html

  
#### Possible fixes ####

  * igt@i915_pm_rpm@module-reload:
    - fi-kbl-guc:         [SKIP][5] ([fdo#109271]) -> [PASS][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-kbl-guc/igt@i915_pm_rpm@module-reload.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-kbl-guc/igt@i915_pm_rpm@module-reload.html

  * igt@i915_selftest@live@execlists:
    - fi-apl-guc:         [DMESG-WARN][7] ([i915#1037]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-apl-guc/igt@i915_selftest@live@execlists.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-apl-guc/igt@i915_selftest@live@execlists.html

  * igt@i915_selftest@live@ring_submission:
    - fi-apl-guc:         [DMESG-WARN][9] -> [PASS][10] +8 similar issues
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-apl-guc/igt@i915_selftest@live@ring_submission.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-apl-guc/igt@i915_selftest@live@ring_submission.html

  * igt@kms_chamelium@dp-crc-fast:
    - fi-kbl-7500u:       [FAIL][11] ([i915#1161] / [i915#262]) -> [PASS][12]
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-kbl-7500u/igt@kms_chamelium@dp-crc-fast.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-kbl-7500u/igt@kms_chamelium@dp-crc-fast.html

  * igt@kms_force_connector_basic@force-connector-state:
    - fi-icl-u2:          [DMESG-WARN][13] ([i915#1226]) -> [PASS][14]
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-icl-u2/igt@kms_force_connector_basic@force-connector-state.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-icl-u2/igt@kms_force_connector_basic@force-connector-state.html

  * igt@prime_self_import@basic-with_one_bo_two_files:
    - fi-tgl-y:           [DMESG-WARN][15] ([i915#402]) -> [PASS][16] +1 similar issue
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/fi-tgl-y/igt@prime_self_import@basic-with_one_bo_two_files.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/fi-tgl-y/igt@prime_self_import@basic-with_one_bo_two_files.html

  
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [i915#1037]: https://gitlab.freedesktop.org/drm/intel/issues/1037
  [i915#1161]: https://gitlab.freedesktop.org/drm/intel/issues/1161
  [i915#1226]: https://gitlab.freedesktop.org/drm/intel/issues/1226
  [i915#2605]: https://gitlab.freedesktop.org/drm/intel/issues/2605
  [i915#262]: https://gitlab.freedesktop.org/drm/intel/issues/262
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402


Participating hosts (44 -> 40)
------------------------------

  Missing    (4): fi-ctg-p8600 fi-ilk-m540 fi-bdw-samus fi-hsw-4200u 


Build changes
-------------

  * Linux: CI_DRM_9471 -> Patchwork_19112

  CI-20190529: 20190529
  CI_DRM_9471: 1e384ea457bc2af47dc7653f8ebbcae21fbac5fc @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5887: 7d87d0f1a22544e6a78dc0920b3f54b64144a029 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19112: 6f41a076ae113f11503a7c3f5ec25940cc6cbe37 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

6f41a076ae11 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
a50b774542f6 drm/dp: Extract i915's eDP backlight code into DRM helpers
f1d7c4b52e52 drm/i915/dp: Remove redundant AUX backlight frequency calculations
5c960bc872b2 drm/nouveau/kms: Don't probe eDP connectors more then once
346d389548f8 drm/nouveau/kms/nv40-/backlight: Assign prop type once

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/index.html

[-- Attachment #1.2: Type: text/html, Size: 5834 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.IGT: failure for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 12081 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev2)
URL   : https://patchwork.freedesktop.org/series/84754/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9471_full -> Patchwork_19112_full
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_19112_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_19112_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_19112_full:

### IGT changes ###

#### Possible regressions ####

  * igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
    - shard-glk:          [PASS][1] -> [FAIL][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-glk1/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-glk7/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic.html

  
Known issues
------------

  Here are the changes found in Patchwork_19112_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_ctx_persistence@legacy-engines-mixed-process:
    - shard-hsw:          NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#1099]) +2 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-hsw4/igt@gem_ctx_persistence@legacy-engines-mixed-process.html

  * igt@gem_huc_copy@huc-copy:
    - shard-tglb:         [PASS][4] -> [SKIP][5] ([i915#2190])
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-tglb2/igt@gem_huc_copy@huc-copy.html
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-tglb6/igt@gem_huc_copy@huc-copy.html

  * igt@gem_workarounds@suspend-resume:
    - shard-kbl:          [PASS][6] -> [DMESG-WARN][7] ([i915#180])
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-kbl2/igt@gem_workarounds@suspend-resume.html
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-kbl6/igt@gem_workarounds@suspend-resume.html

  * igt@i915_pm_dc@dc5-psr:
    - shard-skl:          [PASS][8] -> [INCOMPLETE][9] ([i915#198])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl1/igt@i915_pm_dc@dc5-psr.html
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl5/igt@i915_pm_dc@dc5-psr.html

  * igt@i915_pm_rpm@gem-execbuf-stress-pc8:
    - shard-hsw:          NOTRUN -> [SKIP][10] ([fdo#109271]) +53 similar issues
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-hsw4/igt@i915_pm_rpm@gem-execbuf-stress-pc8.html

  * igt@kms_async_flips@alternate-sync-async-flip:
    - shard-apl:          [PASS][11] -> [FAIL][12] ([i915#2521])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-apl1/igt@kms_async_flips@alternate-sync-async-flip.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-apl7/igt@kms_async_flips@alternate-sync-async-flip.html

  * igt@kms_chamelium@hdmi-audio:
    - shard-skl:          NOTRUN -> [SKIP][13] ([fdo#109271] / [fdo#111827]) +1 similar issue
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl5/igt@kms_chamelium@hdmi-audio.html

  * igt@kms_color@pipe-b-ctm-0-75:
    - shard-skl:          [PASS][14] -> [DMESG-WARN][15] ([i915#1982])
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl8/igt@kms_color@pipe-b-ctm-0-75.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl2/igt@kms_color@pipe-b-ctm-0-75.html

  * igt@kms_color_chamelium@pipe-a-ctm-blue-to-red:
    - shard-hsw:          NOTRUN -> [SKIP][16] ([fdo#109271] / [fdo#111827]) +3 similar issues
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-hsw4/igt@kms_color_chamelium@pipe-a-ctm-blue-to-red.html

  * igt@kms_cursor_crc@pipe-c-cursor-256x85-sliding:
    - shard-skl:          [PASS][17] -> [FAIL][18] ([i915#54])
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl4/igt@kms_cursor_crc@pipe-c-cursor-256x85-sliding.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl1/igt@kms_cursor_crc@pipe-c-cursor-256x85-sliding.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@c-edp1:
    - shard-skl:          [PASS][19] -> [FAIL][20] ([i915#79])
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl9/igt@kms_flip@flip-vs-expired-vblank-interruptible@c-edp1.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl3/igt@kms_flip@flip-vs-expired-vblank-interruptible@c-edp1.html

  * igt@kms_flip@flip-vs-suspend@b-hdmi-a1:
    - shard-hsw:          NOTRUN -> [INCOMPLETE][21] ([i915#2055] / [i915#2295])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-hsw4/igt@kms_flip@flip-vs-suspend@b-hdmi-a1.html

  * igt@kms_frontbuffer_tracking@fbc-2p-rte:
    - shard-skl:          NOTRUN -> [SKIP][22] ([fdo#109271]) +4 similar issues
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl5/igt@kms_frontbuffer_tracking@fbc-2p-rte.html

  * igt@kms_hdr@bpc-switch-dpms:
    - shard-skl:          [PASS][23] -> [FAIL][24] ([i915#1188])
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl4/igt@kms_hdr@bpc-switch-dpms.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl1/igt@kms_hdr@bpc-switch-dpms.html

  * igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
    - shard-tglb:         [PASS][25] -> [INCOMPLETE][26] ([i915#2411] / [i915#456])
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-tglb7/igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-tglb2/igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes.html

  * igt@kms_psr@psr2_cursor_plane_onoff:
    - shard-iclb:         [PASS][27] -> [SKIP][28] ([fdo#109441])
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-iclb1/igt@kms_psr@psr2_cursor_plane_onoff.html

  
#### Possible fixes ####

  * igt@kms_cursor_crc@pipe-c-cursor-128x128-random:
    - shard-skl:          [FAIL][29] ([i915#54]) -> [PASS][30]
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl8/igt@kms_cursor_crc@pipe-c-cursor-128x128-random.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl6/igt@kms_cursor_crc@pipe-c-cursor-128x128-random.html

  * igt@kms_flip@flip-vs-suspend@b-edp1:
    - shard-skl:          [INCOMPLETE][31] ([i915#198]) -> [PASS][32]
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl5/igt@kms_flip@flip-vs-suspend@b-edp1.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl4/igt@kms_flip@flip-vs-suspend@b-edp1.html

  * igt@kms_psr2_su@frontbuffer:
    - shard-iclb:         [SKIP][33] ([fdo#109642] / [fdo#111068]) -> [PASS][34] +1 similar issue
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-iclb3/igt@kms_psr2_su@frontbuffer.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-iclb2/igt@kms_psr2_su@frontbuffer.html

  * igt@perf@blocking:
    - shard-skl:          [FAIL][35] ([i915#1542]) -> [PASS][36]
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl6/igt@perf@blocking.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl7/igt@perf@blocking.html

  * igt@perf@polling-parameterized:
    - shard-tglb:         [FAIL][37] ([i915#1542]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-tglb7/igt@perf@polling-parameterized.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-tglb5/igt@perf@polling-parameterized.html

  * igt@sysfs_heartbeat_interval@mixed@bcs0:
    - shard-skl:          [FAIL][39] ([i915#1731]) -> [PASS][40]
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-skl2/igt@sysfs_heartbeat_interval@mixed@bcs0.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-skl10/igt@sysfs_heartbeat_interval@mixed@bcs0.html

  
#### Warnings ####

  * igt@i915_pm_rc6_residency@rc6-fence:
    - shard-iclb:         [WARN][41] ([i915#1804] / [i915#2684]) -> [WARN][42] ([i915#2681] / [i915#2684]) +1 similar issue
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-iclb7/igt@i915_pm_rc6_residency@rc6-fence.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-iclb1/igt@i915_pm_rc6_residency@rc6-fence.html

  * igt@runner@aborted:
    - shard-hsw:          [FAIL][43] ([i915#2295]) -> [FAIL][44] ([i915#2295] / [i915#483])
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-hsw4/igt@runner@aborted.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-hsw1/igt@runner@aborted.html
    - shard-kbl:          [FAIL][45] ([i915#2295] / [i915#2722]) -> ([FAIL][46], [FAIL][47]) ([i915#2295] / [i915#2722] / [i915#483])
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9471/shard-kbl7/igt@runner@aborted.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-kbl6/igt@runner@aborted.html
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/shard-kbl2/igt@runner@aborted.html

  
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
  [i915#1731]: https://gitlab.freedesktop.org/drm/intel/issues/1731
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1804]: https://gitlab.freedesktop.org/drm/intel/issues/1804
  [i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
  [i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
  [i915#2295]: https://gitlab.freedesktop.org/drm/intel/issues/2295
  [i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
  [i915#2521]: https://gitlab.freedesktop.org/drm/intel/issues/2521
  [i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
  [i915#2684]: https://gitlab.freedesktop.org/drm/intel/issues/2684
  [i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
  [i915#456]: https://gitlab.freedesktop.org/drm/intel/issues/456
  [i915#483]: https://gitlab.freedesktop.org/drm/intel/issues/483
  [i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
  [i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79


Participating hosts (10 -> 10)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * Linux: CI_DRM_9471 -> Patchwork_19112

  CI-20190529: 20190529
  CI_DRM_9471: 1e384ea457bc2af47dc7653f8ebbcae21fbac5fc @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5887: 7d87d0f1a22544e6a78dc0920b3f54b64144a029 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19112: 6f41a076ae113f11503a7c3f5ec25940cc6cbe37 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19112/index.html

[-- Attachment #1.2: Type: text/html, Size: 14300 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
cfc42e455a86 drm/nouveau/kms/nv40-/backlight: Assign prop type once
-:7: WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one

total: 0 errors, 1 warnings, 0 checks, 22 lines checked
945b0c32e7e2 drm/nouveau/kms: Don't probe eDP connectors more then once
-:6: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#6: 
eDP doesn't do hotplugging, so there's no reason for us to reprobe it (unless a

-:23: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#23: FILE: drivers/gpu/drm/nouveau/nouveau_connector.c:558:
+	if (nv_connector->type == DCB_CONNECTOR_eDP &&

total: 0 errors, 1 warnings, 1 checks, 12 lines checked
f4762128551a drm/i915/dp: Remove redundant AUX backlight frequency calculations
f4bf871fa73a drm/dp: Extract i915's eDP backlight code into DRM helpers
e9d81787a6e7 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
-:247: CHECK:CAMELCASE: Avoid CamelCase: <DCB_CONNECTOR_eDP>
#247: FILE: drivers/gpu/drm/nouveau/nouveau_backlight.c:299:
+	if (nv_conn->type == DCB_CONNECTOR_eDP) {

total: 0 errors, 0 warnings, 1 checks, 311 lines checked


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ dim sparse --fast origin/drm-tip
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
-
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgv_sriovmsg.h:261:49: error: static assertion failed: "amd_sriov_msg_pf2vf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1398:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1399:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1458:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16: error: incompatible types in comparison expression (different type sizes):
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:268:16:    unsigned long long *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:276:25:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:277:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17: error: incompatible types in comparison expression (different address spaces):
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17:    struct dma_fence *
+drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:331:17:    struct dma_fence [noderef] __rcu *
+drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:92:56: error: marked inline, but without a definition
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h:257:49: error: static assertion failed: "amd_sriov_msg_vf2pf_info must be 1 KB"
+drivers/gpu/drm/amd/amdgpu/a


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.DOCS: warning for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)

[Patchwork]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)
URL   : https://patchwork.freedesktop.org/series/84754/
State : warning

== Summary ==

$ make htmldocs 2>&1 > /dev/null | grep i915
Error: Cannot open file ./drivers/gpu/drm/i915/gt/intel_lrc.c
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 1.7.9 -function Logical Rings, Logical Ring Contexts and Execlists ./drivers/gpu/drm/i915/gt/intel_lrc.c' failed with return code 1


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 3212 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)
URL   : https://patchwork.freedesktop.org/series/84754/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9473 -> Patchwork_19117
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/index.html

Known issues
------------

  Here are the changes found in Patchwork_19117 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@fbdev@read:
    - fi-tgl-y:           [PASS][1] -> [DMESG-WARN][2] ([i915#402])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/fi-tgl-y/igt@fbdev@read.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/fi-tgl-y/igt@fbdev@read.html

  * igt@i915_selftest@live@coherency:
    - fi-gdg-551:         [PASS][3] -> [DMESG-FAIL][4] ([i915#1748])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/fi-gdg-551/igt@i915_selftest@live@coherency.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/fi-gdg-551/igt@i915_selftest@live@coherency.html

  
#### Possible fixes ####

  * igt@debugfs_test@read_all_entries:
    - fi-apl-guc:         [DMESG-WARN][5] ([i915#62]) -> [PASS][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/fi-apl-guc/igt@debugfs_test@read_all_entries.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/fi-apl-guc/igt@debugfs_test@read_all_entries.html

  * igt@gem_exec_suspend@basic-s0:
    - fi-apl-guc:         [DMESG-WARN][7] ([i915#180] / [i915#62]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/fi-apl-guc/igt@gem_exec_suspend@basic-s0.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/fi-apl-guc/igt@gem_exec_suspend@basic-s0.html

  
  [i915#1748]: https://gitlab.freedesktop.org/drm/intel/issues/1748
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
  [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62


Participating hosts (44 -> 40)
------------------------------

  Missing    (4): fi-ctg-p8600 fi-ilk-m540 fi-bdw-samus fi-hsw-4200u 


Build changes
-------------

  * Linux: CI_DRM_9473 -> Patchwork_19117

  CI-20190529: 20190529
  CI_DRM_9473: c64377fd4f00a839c5b25b9e3bae1052fee113b5 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5888: c79d4e88f4162905da400360b6fa4940122f3a2c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19117: e9d81787a6e79b5b7cd1caaf750cd18d35d4cb8c @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

e9d81787a6e7 drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
f4bf871fa73a drm/dp: Extract i915's eDP backlight code into DRM helpers
f4762128551a drm/i915/dp: Remove redundant AUX backlight frequency calculations
945b0c32e7e2 drm/nouveau/kms: Don't probe eDP connectors more then once
cfc42e455a86 drm/nouveau/kms/nv40-/backlight: Assign prop type once

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/index.html

[-- Attachment #1.2: Type: text/html, Size: 3997 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.IGT: success for drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 11690 bytes --]

== Series Details ==

Series: drm: Extract DPCD backlight helpers from i915, add support in nouveau (rev3)
URL   : https://patchwork.freedesktop.org/series/84754/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9473_full -> Patchwork_19117_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Known issues
------------

  Here are the changes found in Patchwork_19117_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@kms_ccs@pipe-c-crc-sprite-planes-basic:
    - shard-skl:          NOTRUN -> [SKIP][1] ([fdo#109271] / [fdo#111304])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl7/igt@kms_ccs@pipe-c-crc-sprite-planes-basic.html

  * igt@kms_color@pipe-d-ctm-max:
    - shard-skl:          NOTRUN -> [SKIP][2] ([fdo#109271]) +27 similar issues
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl2/igt@kms_color@pipe-d-ctm-max.html

  * igt@kms_color_chamelium@pipe-c-ctm-0-25:
    - shard-skl:          NOTRUN -> [SKIP][3] ([fdo#109271] / [fdo#111827]) +3 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl7/igt@kms_color_chamelium@pipe-c-ctm-0-25.html

  * igt@kms_cursor_crc@pipe-a-cursor-dpms:
    - shard-skl:          [PASS][4] -> [FAIL][5] ([i915#54]) +3 similar issues
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl5/igt@kms_cursor_crc@pipe-a-cursor-dpms.html
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl2/igt@kms_cursor_crc@pipe-a-cursor-dpms.html

  * igt@kms_flip@flip-vs-expired-vblank@a-edp1:
    - shard-tglb:         [PASS][6] -> [FAIL][7] ([i915#2598])
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-tglb6/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-tglb5/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html

  * igt@kms_flip@flip-vs-expired-vblank@c-dp1:
    - shard-kbl:          [PASS][8] -> [FAIL][9] ([i915#79])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-kbl7/igt@kms_flip@flip-vs-expired-vblank@c-dp1.html
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-kbl3/igt@kms_flip@flip-vs-expired-vblank@c-dp1.html

  * igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
    - shard-skl:          [PASS][10] -> [FAIL][11] ([fdo#108145] / [i915#265])
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl5/igt@kms_plane_alpha_blend@pipe-a-coverage-7efc.html
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl2/igt@kms_plane_alpha_blend@pipe-a-coverage-7efc.html

  * igt@kms_properties@connector-properties-legacy:
    - shard-kbl:          [PASS][12] -> [DMESG-WARN][13] ([i915#165] / [i915#180] / [i915#78])
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-kbl7/igt@kms_properties@connector-properties-legacy.html
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-kbl2/igt@kms_properties@connector-properties-legacy.html

  * igt@kms_psr@psr2_sprite_blt:
    - shard-iclb:         [PASS][14] -> [SKIP][15] ([fdo#109441]) +1 similar issue
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-iclb2/igt@kms_psr@psr2_sprite_blt.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-iclb3/igt@kms_psr@psr2_sprite_blt.html

  * igt@perf@polling-parameterized:
    - shard-iclb:         [PASS][16] -> [FAIL][17] ([i915#1542])
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-iclb7/igt@perf@polling-parameterized.html
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-iclb2/igt@perf@polling-parameterized.html

  * igt@sysfs_timeslice_duration@invalid@vecs0:
    - shard-hsw:          NOTRUN -> [SKIP][18] ([fdo#109271]) +9 similar issues
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-hsw8/igt@sysfs_timeslice_duration@invalid@vecs0.html

  
#### Possible fixes ####

  * igt@gem_exec_reloc@basic-many-active@rcs0:
    - shard-apl:          [FAIL][19] ([i915#2389]) -> [PASS][20]
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-apl7/igt@gem_exec_reloc@basic-many-active@rcs0.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-apl4/igt@gem_exec_reloc@basic-many-active@rcs0.html

  * igt@kms_cursor_crc@pipe-a-cursor-64x21-sliding:
    - shard-skl:          [FAIL][21] ([i915#54]) -> [PASS][22] +3 similar issues
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl1/igt@kms_cursor_crc@pipe-a-cursor-64x21-sliding.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl9/igt@kms_cursor_crc@pipe-a-cursor-64x21-sliding.html

  * igt@kms_cursor_legacy@flip-vs-cursor-atomic:
    - shard-skl:          [FAIL][23] ([i915#2346]) -> [PASS][24]
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl9/igt@kms_cursor_legacy@flip-vs-cursor-atomic.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl3/igt@kms_cursor_legacy@flip-vs-cursor-atomic.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1:
    - shard-tglb:         [FAIL][25] ([i915#2598]) -> [PASS][26]
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-tglb1/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-tglb8/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2:
    - shard-glk:          [FAIL][27] ([i915#79]) -> [PASS][28]
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-glk1/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-glk2/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2.html

  * igt@kms_flip@flip-vs-suspend-interruptible@b-edp1:
    - shard-skl:          [INCOMPLETE][29] ([i915#198]) -> [PASS][30]
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl5/igt@kms_flip@flip-vs-suspend-interruptible@b-edp1.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl2/igt@kms_flip@flip-vs-suspend-interruptible@b-edp1.html

  * igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1:
    - shard-hsw:          [INCOMPLETE][31] ([i915#2055] / [i915#2295]) -> [PASS][32]
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-hsw6/igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-hsw8/igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1.html

  * igt@kms_hdr@bpc-switch-suspend:
    - shard-skl:          [FAIL][33] ([i915#1188]) -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl6/igt@kms_hdr@bpc-switch-suspend.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl6/igt@kms_hdr@bpc-switch-suspend.html

  * igt@kms_plane_lowres@pipe-a-tiling-y:
    - shard-glk:          [FAIL][35] ([i915#899]) -> [PASS][36]
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-glk3/igt@kms_plane_lowres@pipe-a-tiling-y.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-glk3/igt@kms_plane_lowres@pipe-a-tiling-y.html

  * igt@kms_psr2_su@frontbuffer:
    - shard-iclb:         [SKIP][37] ([fdo#109642] / [fdo#111068]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-iclb7/igt@kms_psr2_su@frontbuffer.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-iclb2/igt@kms_psr2_su@frontbuffer.html

  * igt@kms_psr@psr2_sprite_mmap_gtt:
    - shard-iclb:         [SKIP][39] ([fdo#109441]) -> [PASS][40] +1 similar issue
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-iclb5/igt@kms_psr@psr2_sprite_mmap_gtt.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html

  
#### Warnings ####

  * igt@i915_pm_rc6_residency@rc6-idle:
    - shard-iclb:         [WARN][41] ([i915#2681] / [i915#2684]) -> [WARN][42] ([i915#1804] / [i915#2684])
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-iclb8/igt@i915_pm_rc6_residency@rc6-idle.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-iclb6/igt@i915_pm_rc6_residency@rc6-idle.html

  * igt@runner@aborted:
    - shard-skl:          ([FAIL][43], [FAIL][44]) ([i915#1814] / [i915#2029] / [i915#2295] / [i915#2722] / [i915#483]) -> [FAIL][45] ([i915#2295] / [i915#2722] / [i915#483])
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl7/igt@runner@aborted.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9473/shard-skl3/igt@runner@aborted.html
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/shard-skl5/igt@runner@aborted.html

  
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
  [fdo#111304]: https://bugs.freedesktop.org/show_bug.cgi?id=111304
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
  [i915#165]: https://gitlab.freedesktop.org/drm/intel/issues/165
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1804]: https://gitlab.freedesktop.org/drm/intel/issues/1804
  [i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
  [i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
  [i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
  [i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
  [i915#2295]: https://gitlab.freedesktop.org/drm/intel/issues/2295
  [i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
  [i915#2389]: https://gitlab.freedesktop.org/drm/intel/issues/2389
  [i915#2598]: https://gitlab.freedesktop.org/drm/intel/issues/2598
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
  [i915#2684]: https://gitlab.freedesktop.org/drm/intel/issues/2684
  [i915#2722]: https://gitlab.freedesktop.org/drm/intel/issues/2722
  [i915#483]: https://gitlab.freedesktop.org/drm/intel/issues/483
  [i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
  [i915#78]: https://gitlab.freedesktop.org/drm/intel/issues/78
  [i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
  [i915#899]: https://gitlab.freedesktop.org/drm/intel/issues/899


Participating hosts (10 -> 10)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * Linux: CI_DRM_9473 -> Patchwork_19117

  CI-20190529: 20190529
  CI_DRM_9473: c64377fd4f00a839c5b25b9e3bae1052fee113b5 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5888: c79d4e88f4162905da400360b6fa4940122f3a2c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19117: e9d81787a6e79b5b7cd1caaf750cd18d35d4cb8c @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19117/index.html

[-- Attachment #1.2: Type: text/html, Size: 13643 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx