* [Intel-gfx] udldrmfb: causes WARN in i915 on X60 (x86-32)
@ 2021-02-24 20:09 Pavel Machek
2021-02-25 8:11 ` Thomas Zimmermann
0 siblings, 1 reply; 7+ messages in thread
From: Pavel Machek @ 2021-02-24 20:09 UTC (permalink / raw)
To: kernel list, jani.nikula, joonas.lahtinen, rodrigo.vivi,
intel-gfx, airlied, sean, tzimmermann, dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 4041 bytes --]
Hi!
This is in -next, but I get same behaviour on 5.11; and no, udl does
not work, but monitor is detected:
pavel@amd:~/g/tui/crashled$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 246mm x 185mm
1024x768 50.00*+ 60.00 40.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
DVI-1-0 connected 1024x768+0+0 304mm x 228mm
1024x768 60.00*+ 75.03
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
1024x768 (0x45) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x47) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
640x480 (0x49) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
pavel@amd:~/g/tui/crashled$
[13957.499755] wlan0: associated
[13962.906368] udl 1-5:1.0: [drm] fb1: udldrmfb frame buffer device
[13972.585101] ------------[ cut here ]------------
[13972.585117] WARNING: CPU: 0 PID: 3159 at kernel/dma/mapping.c:192 dma_map_sg_attrs+0x38/0x50
[13972.585137] Modules linked in:
[13972.585149] CPU: 0 PID: 3159 Comm: Xorg Not tainted 5.11.0-next-20210223+ #176
[13972.585158] Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
[13972.585166] EIP: dma_map_sg_attrs+0x38/0x50
[13972.585176] Code: f0 01 00 00 00 74 23 ff 75 0c 53 e8 72 1b 00 00 5a 59 85 c0 78 1c 8b 5d fc c9 c3 8d b4 26 00 00 00 00 0f 0b 8d b6 00 00 00 00 <0f> 0b 31 c0 eb e6 66 90 0f 0b 8d b4 26 00 00 00 00 8d b4 26 00 00
[13972.585186] EAX: c296c41c EBX: 00000000 ECX: 00000055 EDX: dbbc4800
[13972.585194] ESI: c69f9ea0 EDI: d2c313c0 EBP: c5cbdda8 ESP: c5cbdda4
[13972.585202] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246
[13972.585211] CR0: 80050033 CR2: b6b99000 CR3: 05d42000 CR4: 000006b0
[13972.585219] Call Trace:
[13972.585227] i915_gem_map_dma_buf+0xee/0x160
[13972.585240] dma_buf_map_attachment+0xb8/0x140
[13972.585251] drm_gem_prime_import_dev.part.0+0x33/0xc0
[13972.585262] ? drm_gem_shmem_create+0x10/0x10
[13972.585271] drm_gem_prime_import_dev+0x22/0x70
[13972.585280] drm_gem_prime_fd_to_handle+0x186/0x1c0
[13972.585289] ? drm_gem_prime_import_dev+0x70/0x70
[13972.585298] ? drm_prime_destroy_file_private+0x20/0x20
[13972.585307] drm_prime_fd_to_handle_ioctl+0x1c/0x30
[13972.585315] drm_ioctl_kernel+0x8e/0xe0
[13972.585325] ? drm_prime_destroy_file_private+0x20/0x20
[13972.585334] drm_ioctl+0x1fd/0x380
[13972.585343] ? drm_prime_destroy_file_private+0x20/0x20
[13972.585352] ? ksys_write+0x5c/0xd0
[13972.585363] ? vfs_write+0xeb/0x3f0
[13972.585371] ? drm_ioctl_kernel+0xe0/0xe0
[13972.585380] __ia32_sys_ioctl+0x369/0x7d0
[13972.585389] ? exit_to_user_mode_prepare+0x4e/0x170
[13972.585398] do_int80_syscall_32+0x2c/0x40
[13972.585409] entry_INT80_32+0x111/0x111
[13972.585419] EIP: 0xb7f68092
[13972.585427] Code: 00 00 00 e9 90 ff ff ff ff a3 24 00 00 00 68 30 00 00 00 e9 80 ff ff ff ff a3 e8 ff ff ff 66 90 00 00 00 00 00 00 00 00 cd 80 <c3> 8d b4 26 00 00 00 00 8d b6 00 00 00 00 8b 1c 24 c3 8d b4 26 00
[13972.585436] EAX: ffffffda EBX: 00000030 ECX: c00c642e EDX: bfaeda30
[13972.585444] ESI: 00915790 EDI: c00c642e EBP: 00000030 ESP: bfaed9e4
[13972.585452] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00200296
[13972.585461] ? asm_exc_nmi+0xcc/0x2bc
[13972.585470] ---[ end trace 46a21fad0595bc89 ]---
pavel@amd:~/g/tui/crashled$
Any ideas?
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [Intel-gfx] udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-24 20:09 [Intel-gfx] udldrmfb: causes WARN in i915 on X60 (x86-32) Pavel Machek
@ 2021-02-25 8:11 ` Thomas Zimmermann
2021-02-25 9:53 ` [Intel-gfx] udldrm does not recover from powersave? " Pavel Machek
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Zimmermann @ 2021-02-25 8:11 UTC (permalink / raw)
To: Pavel Machek, kernel list, jani.nikula, joonas.lahtinen,
rodrigo.vivi, intel-gfx, airlied, sean, dri-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 4654 bytes --]
Hi
Am 24.02.21 um 21:09 schrieb Pavel Machek:
> Hi!
>
> This is in -next, but I get same behaviour on 5.11; and no, udl does
Thanks for reporting. We are in the process of fixing the issue. The
latest patch is at [1].
Best regards
Thomas
[1]
https://lore.kernel.org/dri-devel/b44307cf-25f9-acd0-eb35-92e8716205de@suse.de/T/#m74795744a58836dcba055fdcd6a0697811b8c14b
> not work, but monitor is detected:
>
> pavel@amd:~/g/tui/crashled$ xrandr
> Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
> LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 246mm x 185mm
> 1024x768 50.00*+ 60.00 40.00
> 800x600 60.32 56.25
> 640x480 59.94
> VGA1 disconnected (normal left inverted right x axis y axis)
> DVI-1-0 connected 1024x768+0+0 304mm x 228mm
> 1024x768 60.00*+ 75.03
> 800x600 75.00 60.32
> 640x480 75.00 59.94
> 720x400 70.08
> 1024x768 (0x45) 65.000MHz -HSync -VSync
> h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
> v: height 768 start 771 end 777 total 806 clock 60.00Hz
> 800x600 (0x47) 40.000MHz +HSync +VSync
> h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
> v: height 600 start 601 end 605 total 628 clock 60.32Hz
> 640x480 (0x49) 25.175MHz -HSync -VSync
> h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
> v: height 480 start 490 end 492 total 525 clock 59.94Hz
> pavel@amd:~/g/tui/crashled$
>
>
> [13957.499755] wlan0: associated
> [13962.906368] udl 1-5:1.0: [drm] fb1: udldrmfb frame buffer device
> [13972.585101] ------------[ cut here ]------------
> [13972.585117] WARNING: CPU: 0 PID: 3159 at kernel/dma/mapping.c:192 dma_map_sg_attrs+0x38/0x50
> [13972.585137] Modules linked in:
> [13972.585149] CPU: 0 PID: 3159 Comm: Xorg Not tainted 5.11.0-next-20210223+ #176
> [13972.585158] Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011
> [13972.585166] EIP: dma_map_sg_attrs+0x38/0x50
> [13972.585176] Code: f0 01 00 00 00 74 23 ff 75 0c 53 e8 72 1b 00 00 5a 59 85 c0 78 1c 8b 5d fc c9 c3 8d b4 26 00 00 00 00 0f 0b 8d b6 00 00 00 00 <0f> 0b 31 c0 eb e6 66 90 0f 0b 8d b4 26 00 00 00 00 8d b4 26 00 00
> [13972.585186] EAX: c296c41c EBX: 00000000 ECX: 00000055 EDX: dbbc4800
> [13972.585194] ESI: c69f9ea0 EDI: d2c313c0 EBP: c5cbdda8 ESP: c5cbdda4
> [13972.585202] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246
> [13972.585211] CR0: 80050033 CR2: b6b99000 CR3: 05d42000 CR4: 000006b0
> [13972.585219] Call Trace:
> [13972.585227] i915_gem_map_dma_buf+0xee/0x160
> [13972.585240] dma_buf_map_attachment+0xb8/0x140
> [13972.585251] drm_gem_prime_import_dev.part.0+0x33/0xc0
> [13972.585262] ? drm_gem_shmem_create+0x10/0x10
> [13972.585271] drm_gem_prime_import_dev+0x22/0x70
> [13972.585280] drm_gem_prime_fd_to_handle+0x186/0x1c0
> [13972.585289] ? drm_gem_prime_import_dev+0x70/0x70
> [13972.585298] ? drm_prime_destroy_file_private+0x20/0x20
> [13972.585307] drm_prime_fd_to_handle_ioctl+0x1c/0x30
> [13972.585315] drm_ioctl_kernel+0x8e/0xe0
> [13972.585325] ? drm_prime_destroy_file_private+0x20/0x20
> [13972.585334] drm_ioctl+0x1fd/0x380
> [13972.585343] ? drm_prime_destroy_file_private+0x20/0x20
> [13972.585352] ? ksys_write+0x5c/0xd0
> [13972.585363] ? vfs_write+0xeb/0x3f0
> [13972.585371] ? drm_ioctl_kernel+0xe0/0xe0
> [13972.585380] __ia32_sys_ioctl+0x369/0x7d0
> [13972.585389] ? exit_to_user_mode_prepare+0x4e/0x170
> [13972.585398] do_int80_syscall_32+0x2c/0x40
> [13972.585409] entry_INT80_32+0x111/0x111
> [13972.585419] EIP: 0xb7f68092
> [13972.585427] Code: 00 00 00 e9 90 ff ff ff ff a3 24 00 00 00 68 30 00 00 00 e9 80 ff ff ff ff a3 e8 ff ff ff 66 90 00 00 00 00 00 00 00 00 cd 80 <c3> 8d b4 26 00 00 00 00 8d b6 00 00 00 00 8b 1c 24 c3 8d b4 26 00
> [13972.585436] EAX: ffffffda EBX: 00000030 ECX: c00c642e EDX: bfaeda30
> [13972.585444] ESI: 00915790 EDI: c00c642e EBP: 00000030 ESP: bfaed9e4
> [13972.585452] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00200296
> [13972.585461] ? asm_exc_nmi+0xcc/0x2bc
> [13972.585470] ---[ end trace 46a21fad0595bc89 ]---
> pavel@amd:~/g/tui/crashled$
>
> Any ideas?
>
> Best regards,
>
> Pavel
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Intel-gfx] udldrm does not recover from powersave? Re: udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-25 8:11 ` Thomas Zimmermann
@ 2021-02-25 9:53 ` Pavel Machek
2021-02-25 10:02 ` Thomas Zimmermann
2021-02-26 8:48 ` Thomas Zimmermann
0 siblings, 2 replies; 7+ messages in thread
From: Pavel Machek @ 2021-02-25 9:53 UTC (permalink / raw)
To: Thomas Zimmermann; +Cc: intel-gfx, kernel list, dri-devel, airlied
[-- Attachment #1.1: Type: text/plain, Size: 548 bytes --]
Hi!
> >This is in -next, but I get same behaviour on 5.11; and no, udl does
>
> Thanks for reporting. We are in the process of fixing the issue. The latest
> patch is at [1].
>
Thank you, that fixes the DMA issue, and I can use the udl.
...for a while. Then screensaver blanks laptop screen, udl screen
blanks too. Upon hitting a key, internal screen shows up, udl does
not.
I try rerunning xrandr ... --auto, but could not recover it.
Any ideas?
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Intel-gfx] udldrm does not recover from powersave? Re: udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-25 9:53 ` [Intel-gfx] udldrm does not recover from powersave? " Pavel Machek
@ 2021-02-25 10:02 ` Thomas Zimmermann
2021-02-25 10:15 ` Pavel Machek
2021-02-25 17:07 ` Pavel Machek
2021-02-26 8:48 ` Thomas Zimmermann
1 sibling, 2 replies; 7+ messages in thread
From: Thomas Zimmermann @ 2021-02-25 10:02 UTC (permalink / raw)
To: Pavel Machek; +Cc: intel-gfx, kernel list, dri-devel, airlied
[-- Attachment #1.1.1: Type: text/plain, Size: 1193 bytes --]
Hi
Am 25.02.21 um 10:53 schrieb Pavel Machek:
> Hi!
>
>>> This is in -next, but I get same behaviour on 5.11; and no, udl does
>>
>> Thanks for reporting. We are in the process of fixing the issue. The latest
>> patch is at [1].
>>
>
> Thank you, that fixes the DMA issue, and I can use the udl.
>
> ...for a while. Then screensaver blanks laptop screen, udl screen
> blanks too. Upon hitting a key, internal screen shows up, udl does
> not.
>
> I try rerunning xrandr ... --auto, but could not recover it.
>
> Any ideas?
Did it work before the regression?
For testing, could you please remove the fix and then do
git revert 6eb0233ec2d0
This would restore the old version. Please report back on the results.
Best regards
Thomas
>
> Best regards,
> Pavel
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Intel-gfx] udldrm does not recover from powersave? Re: udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-25 10:02 ` Thomas Zimmermann
@ 2021-02-25 10:15 ` Pavel Machek
2021-02-25 17:07 ` Pavel Machek
1 sibling, 0 replies; 7+ messages in thread
From: Pavel Machek @ 2021-02-25 10:15 UTC (permalink / raw)
To: Thomas Zimmermann; +Cc: intel-gfx, kernel list, dri-devel, airlied
[-- Attachment #1.1: Type: text/plain, Size: 744 bytes --]
Hi!
> > Thank you, that fixes the DMA issue, and I can use the udl.
> >
> > ...for a while. Then screensaver blanks laptop screen, udl screen
> > blanks too. Upon hitting a key, internal screen shows up, udl does
> > not.
> >
> > I try rerunning xrandr ... --auto, but could not recover it.
> >
> > Any ideas?
>
> Did it work before the regression?
I don't know. I'm trying to get it to work, I basically did not use it before.
> For testing, could you please remove the fix and then do
>
> git revert 6eb0233ec2d0
>
> This would restore the old version. Please report back on the results.
I doubt this is related, but I can try.
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Intel-gfx] udldrm does not recover from powersave? Re: udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-25 10:02 ` Thomas Zimmermann
2021-02-25 10:15 ` Pavel Machek
@ 2021-02-25 17:07 ` Pavel Machek
1 sibling, 0 replies; 7+ messages in thread
From: Pavel Machek @ 2021-02-25 17:07 UTC (permalink / raw)
To: Thomas Zimmermann; +Cc: intel-gfx, kernel list, dri-devel, airlied
[-- Attachment #1.1: Type: text/plain, Size: 1816 bytes --]
Hi!
> > > > This is in -next, but I get same behaviour on 5.11; and no, udl does
> > >
> > > Thanks for reporting. We are in the process of fixing the issue. The latest
> > > patch is at [1].
> > >
> >
> > Thank you, that fixes the DMA issue, and I can use the udl.
> >
> > ...for a while. Then screensaver blanks laptop screen, udl screen
> > blanks too. Upon hitting a key, internal screen shows up, udl does
> > not.
> >
> > I try rerunning xrandr ... --auto, but could not recover it.
> >
> > Any ideas?
>
> Did it work before the regression?
>
> For testing, could you please remove the fix and then do
>
> git revert 6eb0233ec2d0
>
> This would restore the old version. Please report back on the
> results.
Ok, I went to 7f206cf3ec2b with 6eb0233ec2d0 reverted. That fails to
build:
drivers/usb/core/message.c: In function ‘usb_set_configuration’:
drivers/usb/core/message.c:2100:12: error: ‘struct device’ has no member named ‘dma_pfn_offset’
2100 | intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
| ^
drivers/usb/core/message.c:2100:38: error: ‘struct device’ has no member named ‘dma_pfn_offset’
2100 | intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
| ^
CC drivers/net/ethernet/intel/e1000e/param.o
make[3]: *** [scripts/Makefile.build:271: drivers/usb/core/message.o]
Error 1
So I tried to go to bad commit's parent:
git checkout 6eb0233ec2d0^
git log
commit cf141ae989e2ff119cd320326da5923b480d1641
ARM/keystone: move the DMA offset handling under ifdef CONFIG_ARM_LPAE
But that resulted in lockup soon after "--setprovidersource" command
was isued.
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Intel-gfx] udldrm does not recover from powersave? Re: udldrmfb: causes WARN in i915 on X60 (x86-32)
2021-02-25 9:53 ` [Intel-gfx] udldrm does not recover from powersave? " Pavel Machek
2021-02-25 10:02 ` Thomas Zimmermann
@ 2021-02-26 8:48 ` Thomas Zimmermann
1 sibling, 0 replies; 7+ messages in thread
From: Thomas Zimmermann @ 2021-02-26 8:48 UTC (permalink / raw)
To: Pavel Machek; +Cc: intel-gfx, kernel list, dri-devel, airlied
[-- Attachment #1.1.1: Type: text/plain, Size: 1240 bytes --]
Hi
Am 25.02.21 um 10:53 schrieb Pavel Machek:
> Hi!
>
>>> This is in -next, but I get same behaviour on 5.11; and no, udl does
>>
>> Thanks for reporting. We are in the process of fixing the issue. The latest
>> patch is at [1].
>>
>
> Thank you, that fixes the DMA issue, and I can use the udl.
>
> ...for a while. Then screensaver blanks laptop screen, udl screen
> blanks too. Upon hitting a key, internal screen shows up, udl does
> not.
>
> I try rerunning xrandr ... --auto, but could not recover it.
>
> Any ideas?
Seems unrelated. I tested for the issue with the last good revision and
with the latest fix applied. I use Gnome/X11.
With both kernels, the udl adapter's display came back after suspending.
So I'd attribute the problem to something else.
Best regards
Thomas
>
> Best regards,
> Pavel
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-02-26 8:48 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-24 20:09 [Intel-gfx] udldrmfb: causes WARN in i915 on X60 (x86-32) Pavel Machek
2021-02-25 8:11 ` Thomas Zimmermann
2021-02-25 9:53 ` [Intel-gfx] udldrm does not recover from powersave? " Pavel Machek
2021-02-25 10:02 ` Thomas Zimmermann
2021-02-25 10:15 ` Pavel Machek
2021-02-25 17:07 ` Pavel Machek
2021-02-26 8:48 ` Thomas Zimmermann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).