IO-Uring Archive on
 help / color / Atom feed
* shutdown not affecting connection?
@ 2020-02-08 13:55 Glauber Costa
  2020-02-08 14:26 ` Pavel Begunkov
  2020-02-08 18:48 ` Andres Freund
  0 siblings, 2 replies; 10+ messages in thread
From: Glauber Costa @ 2020-02-08 13:55 UTC (permalink / raw)
  To: io-uring, Jens Axboe, Avi Kivity


I've been trying to make sense of some weird behavior with the seastar
implementation of io_uring, and started to suspect a bug in io_uring's

The situation is as follows:

- A connect() call is issued (and in the backend I can choose if I use
uring or not)
- The connection is supposed to take a while to establish.
- I call shutdown on the file descriptor

If io_uring is not used:
- connect() starts by  returning EINPROGRESS as expected, and after
the shutdown the file descriptor is finally made ready for epoll. I
call getsockopt(SOL_SOCKET, SO_ERROR), and see the error (104)

if io_uring is used:
- if the SQE has the IOSQE_ASYNC flag on, connect() never returns.
- if the SQE *does not* have the IOSQE_ASYNC flag on, then most of the
time the test works as intended and connect() returns 104, but
occasionally it hangs too. Note that, seastar may choose not to call
io_uring_enter immediately and batch sqes.

Sounds like some kind of race?

I know C++ probably stinks like the devil for you guys, but if you are
curious to see the code, this fails one of our unit tests:
See test_connection_attempt_is_shutdown
(above is the master seastar tree, not including the io_uring implementation)

Please let me know if this rings a bell and if there is anything I
should be verifying here

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-08 13:55 shutdown not affecting connection? Glauber Costa
2020-02-08 14:26 ` Pavel Begunkov
2020-02-08 18:42   ` Glauber Costa
2020-02-08 18:48     ` Avi Kivity
2020-02-08 18:57       ` Glauber Costa
2020-02-08 20:20         ` Glauber Costa
2020-02-08 20:28           ` Avi Kivity
2020-02-08 20:43             ` Glauber Costa
2020-02-08 18:48 ` Andres Freund
2020-02-08 18:54   ` Glauber Costa

IO-Uring Archive on

Archives are clonable:
	git clone --mirror io-uring/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 io-uring io-uring/ \
	public-inbox-index io-uring

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone