kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pierre Morel <pmorel@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, frankja@linux.ibm.com,
	david@redhat.com, thuth@redhat.com, cohuck@redhat.com
Subject: [kvm-unit-tests PATCH v7 12/12] s390x: css: ping pong
Date: Mon, 18 May 2020 18:07:31 +0200	[thread overview]
Message-ID: <1589818051-20549-13-git-send-email-pmorel@linux.ibm.com> (raw)
In-Reply-To: <1589818051-20549-1-git-send-email-pmorel@linux.ibm.com>

To test a write command with the SSCH instruction we need a QEMU device,
with control unit type 0xC0CA. The PONG device is such a device.

This type of device responds to PONG_WRITE requests by incrementing an
integer, stored as a string at offset 0 of the CCW data.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
 s390x/css.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/s390x/css.c b/s390x/css.c
index c94a916..da80574 100644
--- a/s390x/css.c
+++ b/s390x/css.c
@@ -21,6 +21,12 @@
 #include <css.h>
 
 #define PONG_CU_TYPE		0xc0ca
+/* Channel Commands for PONG device */
+#define PONG_WRITE	0x21 /* Write */
+#define PONG_READ	0x22 /* Read buffer */
+
+#define BUFSZ	9
+static char buffer[BUFSZ];
 
 struct lowcore *lowcore = (void *)0x0;
 
@@ -274,6 +280,53 @@ unreg_cb:
 	unregister_io_int_func(irq_io);
 }
 
+static void test_ping(void)
+{
+	int success, result;
+	int cnt = 0, max = 4;
+
+	if (senseid.cu_type != PONG_CU) {
+		report_skip("Device is not a pong device.");
+		return;
+	}
+
+	result = register_io_int_func(irq_io);
+	if (result) {
+		report(0, "Could not register IRQ handler");
+		return;
+	}
+
+	while (cnt++ < max) {
+		snprintf(buffer, BUFSZ, "%08x\n", cnt);
+		success = start_subchannel(PONG_WRITE, buffer, BUFSZ, 0);
+		if (!success) {
+			report(0, "start_subchannel failed");
+			goto unreg_cb;
+		}
+
+		wait_for_interrupt(PSW_MASK_IO);
+
+		success = start_subchannel(PONG_READ, buffer, BUFSZ, 0);
+		if (!success) {
+			report(0, "start_subchannel failed");
+			goto unreg_cb;
+		}
+
+		wait_for_interrupt(PSW_MASK_IO);
+
+		result = atol(buffer);
+		if (result != (cnt + 1)) {
+			report(0, "Bad answer from pong: %08x - %08x",
+			       cnt, result);
+			goto unreg_cb;
+		}
+	}
+	report(1, "ping-pong count 0x%08x", cnt);
+
+unreg_cb:
+	unregister_io_int_func(irq_io);
+}
+
 static struct {
 	const char *name;
 	void (*func)(void);
@@ -281,6 +334,7 @@ static struct {
 	{ "enumerate (stsch)", test_enumerate },
 	{ "enable (msch)", test_enable },
 	{ "sense (ssch/tsch)", test_sense },
+	{ "ping-pong (ssch/tsch)", test_ping },
 	{ NULL, NULL }
 };
 
-- 
2.25.1


      parent reply	other threads:[~2020-05-18 16:07 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-18 16:07 [kvm-unit-tests PATCH v7 00/12] s390x: Testing the Channel Subsystem I/O Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 01/12] s390x: saving regs for interrupts Pierre Morel
2020-05-26 10:30   ` Janosch Frank
2020-05-26 11:39     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 02/12] s390x: Use PSW bits definitions in cstart Pierre Morel
2020-05-26 10:17   ` Janosch Frank
2020-05-26 11:40     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 03/12] s390x: Move control register bit definitions and add AFP to them Pierre Morel
2020-05-25 18:57   ` Thomas Huth
2020-05-26 11:51     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 04/12] s390x: interrupt registration Pierre Morel
2020-05-26 18:08   ` Thomas Huth
2020-05-27 15:54     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 05/12] s390x: export the clock get_clock_ms() utility Pierre Morel
2020-05-26 18:10   ` Thomas Huth
2020-06-04  6:49     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 06/12] s390x: use get_clock_ms() to calculate a delay in ms Pierre Morel
2020-05-26 18:16   ` Thomas Huth
2020-06-04  7:21     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 07/12] s390x: Library resources for CSS tests Pierre Morel
2020-05-26 16:30   ` Cornelia Huck
2020-06-04  7:42     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 08/12] s390x: css: stsch, enumeration test Pierre Morel
2020-05-25 19:12   ` Thomas Huth
2020-05-26 10:41     ` Janosch Frank
2020-05-26 10:49       ` Thomas Huth
2020-05-26 11:38         ` Pierre Morel
2020-05-27  8:55   ` Cornelia Huck
2020-06-04 11:35     ` Pierre Morel
2020-06-04 11:45       ` Thomas Huth
2020-06-04 12:27         ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 09/12] s390x: css: msch, enable test Pierre Morel
2020-05-27  9:42   ` Cornelia Huck
2020-06-04 12:46     ` Pierre Morel
2020-06-04 13:29       ` Cornelia Huck
2020-06-05  7:37         ` Pierre Morel
2020-06-05  8:24           ` Pierre Morel
2020-06-05  9:00             ` Cornelia Huck
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 10/12] s390x: define function to wait for interrupt Pierre Morel
2020-05-26 10:42   ` Janosch Frank
2020-05-26 11:40     ` Pierre Morel
2020-05-27  9:45   ` Cornelia Huck
2020-06-04 12:47     ` Pierre Morel
2020-05-18 16:07 ` [kvm-unit-tests PATCH v7 11/12] s390x: css: ssch/tsch with sense and interrupt Pierre Morel
2020-05-27 10:09   ` Cornelia Huck
2020-06-05  7:37     ` Pierre Morel
2020-06-05  9:02       ` Cornelia Huck
2020-05-18 16:07 ` Pierre Morel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589818051-20549-13-git-send-email-pmorel@linux.ibm.com \
    --to=pmorel@linux.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).