From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, "Andy Lutomirski" <luto@kernel.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
kvm@vger.kernel.org, "Jason A. Donenfeld" <Jason@zx2c4.com>,
"Rik van Riel" <riel@surriel.com>,
"Dave Hansen" <dave.hansen@linux.intel.com>,
"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>
Subject: [PATCH 11/27] x86/fpu: Make get_xsave_field_ptr() and get_xsave_addr() use feature number instead of mask
Date: Wed, 3 Apr 2019 18:41:40 +0200 [thread overview]
Message-ID: <20190403164156.19645-12-bigeasy@linutronix.de> (raw)
In-Reply-To: <20190403164156.19645-1-bigeasy@linutronix.de>
After changing the argument of __raw_xsave_addr() from a mask to number
Dave suggested to check if it makes sense to do the same for
get_xsave_addr(). As it turns out it does. Only get_xsave_addr() needs
the mask to check if the requested feature is part of what is
support/saved and then uses the number again. The shift operation is
cheaper compared to "find last bit set". Also, the feature number uses
less opcode space compared to the mask :)
Make get_xsave_addr() argument a xfeature number instead of mask and fix
up its callers.
As part of this use xfeature_nr and xfeature_mask consistently.
This results in changes to the kvm code as:
feature -> xfeature_mask
index -> xfeature_nr
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
arch/x86/include/asm/fpu/xstate.h | 4 ++--
arch/x86/kernel/fpu/xstate.c | 22 ++++++++++------------
arch/x86/kernel/traps.c | 2 +-
arch/x86/kvm/x86.c | 28 ++++++++++++++--------------
arch/x86/mm/mpx.c | 6 +++---
5 files changed, 30 insertions(+), 32 deletions(-)
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index 48581988d78c7..fbe41f808e5d8 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -46,8 +46,8 @@ extern void __init update_regset_xstate_info(unsigned int size,
u64 xstate_mask);
void fpu__xstate_clear_all_cpu_caps(void);
-void *get_xsave_addr(struct xregs_state *xsave, int xstate);
-const void *get_xsave_field_ptr(int xstate_field);
+void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr);
+const void *get_xsave_field_ptr(int xfeature_nr);
int using_compacted_format(void);
int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
int copy_xstate_to_user(void __user *ubuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 4f7f3c5d0d0cf..9c459fd1d38e6 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -830,15 +830,14 @@ static void *__raw_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
*
* Inputs:
* xstate: the thread's storage area for all FPU data
- * xstate_feature: state which is defined in xsave.h (e.g.
- * XFEATURE_MASK_FP, XFEATURE_MASK_SSE, etc...)
+ * xfeature_nr: state which is defined in xsave.h (e.g. XFEATURE_FP,
+ * XFEATURE_SSE, etc...)
* Output:
* address of the state in the xsave area, or NULL if the
* field is not present in the xsave buffer.
*/
-void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
+void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
{
- int xfeature_nr;
/*
* Do we even *have* xsave state?
*/
@@ -850,11 +849,11 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
* have not enabled. Remember that pcntxt_mask is
* what we write to the XCR0 register.
*/
- WARN_ONCE(!(xfeatures_mask & xstate_feature),
+ WARN_ONCE(!(xfeatures_mask & BIT_ULL(xfeature_nr)),
"get of unsupported state");
/*
* This assumes the last 'xsave*' instruction to
- * have requested that 'xstate_feature' be saved.
+ * have requested that 'xfeature_nr' be saved.
* If it did not, we might be seeing and old value
* of the field in the buffer.
*
@@ -863,10 +862,9 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
* or because the "init optimization" caused it
* to not be saved.
*/
- if (!(xsave->header.xfeatures & xstate_feature))
+ if (!(xsave->header.xfeatures & BIT_ULL(xfeature_nr)))
return NULL;
- xfeature_nr = fls64(xstate_feature) - 1;
return __raw_xsave_addr(xsave, xfeature_nr);
}
EXPORT_SYMBOL_GPL(get_xsave_addr);
@@ -882,13 +880,13 @@ EXPORT_SYMBOL_GPL(get_xsave_addr);
* Note that this only works on the current task.
*
* Inputs:
- * @xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP,
- * XFEATURE_MASK_SSE, etc...)
+ * @xfeature_nr: state which is defined in xsave.h (e.g. XFEATURE_FP,
+ * XFEATURE_SSE, etc...)
* Output:
* address of the state in the xsave area or NULL if the state
* is not present or is in its 'init state'.
*/
-const void *get_xsave_field_ptr(int xsave_state)
+const void *get_xsave_field_ptr(int xfeature_nr)
{
struct fpu *fpu = ¤t->thread.fpu;
@@ -898,7 +896,7 @@ const void *get_xsave_field_ptr(int xsave_state)
*/
fpu__save(fpu);
- return get_xsave_addr(&fpu->state.xsave, xsave_state);
+ return get_xsave_addr(&fpu->state.xsave, xfeature_nr);
}
#ifdef CONFIG_ARCH_HAS_PKEYS
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d26f9e9c3d830..8b6d03e55d2f7 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -456,7 +456,7 @@ dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
* which is all zeros which indicates MPX was not
* responsible for the exception.
*/
- bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+ bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
if (!bndcsr)
goto exit_trap;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 099b851dabafd..8022e7769b3a1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3674,15 +3674,15 @@ static void fill_xsave(u8 *dest, struct kvm_vcpu *vcpu)
*/
valid = xstate_bv & ~XFEATURE_MASK_FPSSE;
while (valid) {
- u64 feature = valid & -valid;
- int index = fls64(feature) - 1;
- void *src = get_xsave_addr(xsave, feature);
+ u64 xfeature_mask = valid & -valid;
+ int xfeature_nr = fls64(xfeature_mask) - 1;
+ void *src = get_xsave_addr(xsave, xfeature_nr);
if (src) {
u32 size, offset, ecx, edx;
- cpuid_count(XSTATE_CPUID, index,
+ cpuid_count(XSTATE_CPUID, xfeature_nr,
&size, &offset, &ecx, &edx);
- if (feature == XFEATURE_MASK_PKRU)
+ if (xfeature_nr == XFEATURE_PKRU)
memcpy(dest + offset, &vcpu->arch.pkru,
sizeof(vcpu->arch.pkru));
else
@@ -3690,7 +3690,7 @@ static void fill_xsave(u8 *dest, struct kvm_vcpu *vcpu)
}
- valid -= feature;
+ valid -= xfeature_mask;
}
}
@@ -3717,22 +3717,22 @@ static void load_xsave(struct kvm_vcpu *vcpu, u8 *src)
*/
valid = xstate_bv & ~XFEATURE_MASK_FPSSE;
while (valid) {
- u64 feature = valid & -valid;
- int index = fls64(feature) - 1;
- void *dest = get_xsave_addr(xsave, feature);
+ u64 xfeature_mask = valid & -valid;
+ int xfeature_nr = fls64(xfeature_mask) - 1;
+ void *dest = get_xsave_addr(xsave, xfeature_nr);
if (dest) {
u32 size, offset, ecx, edx;
- cpuid_count(XSTATE_CPUID, index,
+ cpuid_count(XSTATE_CPUID, xfeature_nr,
&size, &offset, &ecx, &edx);
- if (feature == XFEATURE_MASK_PKRU)
+ if (xfeature_nr == XFEATURE_PKRU)
memcpy(&vcpu->arch.pkru, src + offset,
sizeof(vcpu->arch.pkru));
else
memcpy(dest, src + offset, size);
}
- valid -= feature;
+ valid -= xfeature_mask;
}
}
@@ -8850,11 +8850,11 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
if (init_event)
kvm_put_guest_fpu(vcpu);
mpx_state_buffer = get_xsave_addr(&vcpu->arch.guest_fpu->state.xsave,
- XFEATURE_MASK_BNDREGS);
+ XFEATURE_BNDREGS);
if (mpx_state_buffer)
memset(mpx_state_buffer, 0, sizeof(struct mpx_bndreg_state));
mpx_state_buffer = get_xsave_addr(&vcpu->arch.guest_fpu->state.xsave,
- XFEATURE_MASK_BNDCSR);
+ XFEATURE_BNDCSR);
if (mpx_state_buffer)
memset(mpx_state_buffer, 0, sizeof(struct mpx_bndcsr));
if (init_event)
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index c805db6236b47..59726aaf46713 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -142,7 +142,7 @@ int mpx_fault_info(struct mpx_fault_info *info, struct pt_regs *regs)
goto err_out;
}
/* get bndregs field from current task's xsave area */
- bndregs = get_xsave_field_ptr(XFEATURE_MASK_BNDREGS);
+ bndregs = get_xsave_field_ptr(XFEATURE_BNDREGS);
if (!bndregs) {
err = -EINVAL;
goto err_out;
@@ -190,7 +190,7 @@ static __user void *mpx_get_bounds_dir(void)
* The bounds directory pointer is stored in a register
* only accessible if we first do an xsave.
*/
- bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+ bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
if (!bndcsr)
return MPX_INVALID_BOUNDS_DIR;
@@ -376,7 +376,7 @@ static int do_mpx_bt_fault(void)
const struct mpx_bndcsr *bndcsr;
struct mm_struct *mm = current->mm;
- bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
+ bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
if (!bndcsr)
return -EINVAL;
/*
--
2.20.1
next prev parent reply other threads:[~2019-04-03 16:41 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-03 16:41 [PATCH v9 00/27] x86: load FPU registers on return to userland Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 01/27] x86/fpu: Remove fpu->initialized usage in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-13 20:46 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 02/27] x86/fpu: Remove fpu__restore() Sebastian Andrzej Siewior
2019-04-13 20:47 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 03/27] x86/fpu: Remove preempt_disable() in fpu__clear() Sebastian Andrzej Siewior
2019-04-13 20:48 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 04/27] x86/fpu: Always init the `state' " Sebastian Andrzej Siewior
2019-04-13 20:48 ` [tip:x86/fpu] x86/fpu: Always init the state " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 05/27] x86/fpu: Remove fpu->initialized usage in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 20:49 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 06/27] x86/fpu: Don't save fxregs for ia32 frames " Sebastian Andrzej Siewior
2019-04-13 20:50 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 07/27] x86/fpu: Remove fpu->initialized Sebastian Andrzej Siewior
2019-04-13 20:50 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 08/27] x86/fpu: Remove user_fpu_begin() Sebastian Andrzej Siewior
2019-04-13 20:51 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 09/27] x86/fpu: Add (__)make_fpregs_active helpers Sebastian Andrzej Siewior
2019-04-13 20:52 ` [tip:x86/fpu] x86/fpu: Add an __fpregs_load_activate() internal helper tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 10/27] x86/fpu: Make __raw_xsave_addr() use feature number instead of mask Sebastian Andrzej Siewior
2019-04-13 20:52 ` [tip:x86/fpu] x86/fpu: Make __raw_xsave_addr() use a " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` Sebastian Andrzej Siewior [this message]
2019-04-13 20:53 ` [tip:x86/fpu] x86/fpu: Use a feature number instead of mask in two more helpers tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 12/27] x86/pkru: Provide .*_pkru_ins() functions Sebastian Andrzej Siewior
2019-04-10 16:36 ` Borislav Petkov
2019-04-10 16:52 ` Borislav Petkov
2019-04-10 21:25 ` Sebastian Andrzej Siewior
2019-04-10 21:29 ` Dave Hansen
2019-04-11 13:24 ` Borislav Petkov
2019-04-13 20:54 ` [tip:x86/fpu] x86/pkeys: Provide *pkru() helpers tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 13/27] x86/fpu: Only write PKRU if it is different from current Sebastian Andrzej Siewior
2019-04-13 20:55 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 14/27] x86/pkeys: Don't check if PKRU is zero before writting it Sebastian Andrzej Siewior
2019-04-13 20:55 ` [tip:x86/fpu] x86/pkeys: Don't check if PKRU is zero before writing it tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 15/27] x86/fpu: Eager switch PKRU state Sebastian Andrzej Siewior
2019-04-13 20:56 ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 16/27] x86/entry: Add TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-04-13 20:57 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 17/27] x86/fpu: Always store the registers in copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 20:57 ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 18/27] x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD Sebastian Andrzej Siewior
2019-04-13 20:58 ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 19/27] x86/fpu: Update xstate's PKRU value on write_pkru() Sebastian Andrzej Siewior
2019-04-08 18:14 ` Dave Hansen
2019-04-08 20:03 ` Sebastian Andrzej Siewior
2019-04-13 20:59 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 20/27] x86/fpu: Inline copy_user_to_fpregs_zeroing() Sebastian Andrzej Siewior
2019-04-13 21:00 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 21/27] x86/fpu: Let __fpu__restore_sig() restore the !32bit+fxsr frame from kernel memory Sebastian Andrzej Siewior
2019-04-13 21:00 ` [tip:x86/fpu] x86/fpu: Restore from kernel memory on the 64-bit path too tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 22/27] x86/fpu: Merge the two code paths in __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-13 21:01 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 23/27] x86/fpu: Defer FPU state load until return to userspace Sebastian Andrzej Siewior
2019-04-12 14:36 ` Borislav Petkov
2019-04-12 15:24 ` Sebastian Andrzej Siewior
2019-04-12 16:22 ` Borislav Petkov
2019-04-12 16:37 ` Sebastian Andrzej Siewior
2019-04-12 16:48 ` Borislav Petkov
2019-04-12 17:19 ` Sebastian Andrzej Siewior
2019-04-12 17:29 ` Borislav Petkov
2019-04-15 9:14 ` Sebastian Andrzej Siewior
2019-04-13 21:02 ` [tip:x86/fpu] " tip-bot for Rik van Riel
2019-04-03 16:41 ` [PATCH 24/27] x86/fpu: Add a fastpath to __fpu__restore_sig() Sebastian Andrzej Siewior
2019-04-08 17:05 ` Thomas Gleixner
2019-04-08 20:02 ` Sebastian Andrzej Siewior
2019-04-09 7:27 ` Thomas Gleixner
2019-04-12 17:17 ` Borislav Petkov
2019-04-12 17:27 ` Sebastian Andrzej Siewior
2019-04-13 21:02 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 25/27] x86/fpu: Add a fastpath to copy_fpstate_to_sigframe() Sebastian Andrzej Siewior
2019-04-13 21:03 ` [tip:x86/fpu] " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 26/27] x86/fpu: Restore FPU register in copy_fpstate_to_sigframe() in order to use the fastpath Sebastian Andrzej Siewior
2019-04-13 21:04 ` [tip:x86/fpu] x86/fpu: Restore regs " tip-bot for Sebastian Andrzej Siewior
2019-04-03 16:41 ` [PATCH 27/27] x86/pkeys: add PKRU value to init_fpstate Sebastian Andrzej Siewior
2019-04-13 21:05 ` [tip:x86/fpu] x86/pkeys: Add " tip-bot for Sebastian Andrzej Siewior
2019-04-04 14:01 ` [PATCH v9 00/27] x86: load FPU registers on return to userland David Laight
2019-04-04 14:14 ` 'Sebastian Andrzej Siewior'
2019-04-04 14:26 ` Andy Lutomirski
2019-04-04 14:31 ` Sebastian Andrzej Siewior
2019-04-04 15:10 ` David Laight
2019-04-08 17:08 ` Thomas Gleixner
2019-04-12 18:30 ` Borislav Petkov
2019-04-15 8:58 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190403164156.19645-12-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=Jason@zx2c4.com \
--cc=dave.hansen@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=pbonzini@redhat.com \
--cc=riel@surriel.com \
--cc=rkrcmar@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).