kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Xiaoyao Li <xiaoyao.li@intel.com>
Subject: [PATCH v2 00/66] KVM: x86: Introduce KVM cpu caps
Date: Mon,  2 Mar 2020 15:56:03 -0800	[thread overview]
Message-ID: <20200302235709.27467-1-sean.j.christopherson@intel.com> (raw)

Introduce what is effectively a KVM-specific copy of the x86_capabilities
array in boot_cpu_data, kvm_cpu_caps.  kvm_cpu_caps is initialized by
copying boot_cpu_data.x86_capabilities before ->hardware_setup().  It is
then updated by KVM's CPUID logic (both common x86 and VMX/SVM specific)
to adjust the caps to reflect the CPU that KVM will expose to the guest.

Quick synopsis:
  1. Refactor the KVM_GET_SUPPORTED_CPUID stack to consolidate code,
     remove crustiness, and set the stage for introducing kvm_cpu_caps.

  2. Introduce cpuid_entry_*() accessors/mutators to automatically
     handle retrieving the correct reg from a CPUID entry, and to audit
     that the entry matches the reserve CPUID lookup entry.  The
     cpuid_entry_*() helpers make moving the code from common x86 to
     vendor code much less risky.

  3. Move CPUID adjustments to vendor code in preparation for kvm_cpu_caps,
     which will be initialized at load time before the kvm_x86_ops hooks
     are ready to be used, i.e. before ->hardware_setup().

  4. Introduce kvm_cpu_caps and move all the CPUID code over to kvm_cpu_caps.

  5. Use kvm_cpu_cap_has() to kill off a bunch of ->*_supported() hooks.

  6. Additional cleanup in tangentially related areas to kill off even more
     ->*_supported() hooks, including ->set_supported_cpuid().

Tested by verifying the output of KVM_GET_SUPPORTED_CPUID is identical
before and after on every patch on a Haswell and Coffee Lake, and for the
"before vs. after" output on Ice Lake.

Verified correctness when hiding features via Qemu (running this version
of KVM in L1), e.g. that UMIP is correctly emulated for L2 when it's
hidden from L1, on relevant patches.

Boot tested and ran kvm-unit-tests at key points, e.g. large page
handling.

All AMD patches are build-tested only.

v2:
  - Opportunistically remove bare "unsigned" usgae. [Vitaly]
  - Remove CPUID auditing (Vitaly and Paolo suggested making it
    unconditional, then I realized it would trigger false positives).
  - Fix a bug in the series that broke SVM features enumeration.
  - Only advertise SVM features when nested SVM is enabled. [Paolo]
  - Fully remove support for stateful CPUID.0x2. [Vitaly, Paolo]
  - Call out in patch 01's changelog that it technically breaks the
    ABI, but that no known VMM is affected. [Vitaly, Paolo]
  - Use @function instead of hardcoding "2" for thes stateful code (which
    eventually gets tossed anyways). [Vitaly]
  - Move 0x8000000A into common code and kill ->set_supported_cpuid().
    [Vitaly]
  - Call out the subtle emulation handling in ->set_supported_cpuid(),
    which also gets tossed :-).  [Vitaly]
  - Fix the BUILG_BUG_ON() in patch 38. [Vitaly]
  - Use !! to explicitly cast a u32 to a bool. [Vitaly, Paolo]
  - Sort kvm_cpu_cap_mask() calls by leaf number, ascending. [Vitaly]
  - Collect reviews. [Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Vitaly,
    Vitaly, Vitaly, Vitaly, Vitaly, Vitaly, Xiaoyao, Xiaoyao, Xiaoyao]

Sean Christopherson (66):
  KVM: x86: Return -E2BIG when KVM_GET_SUPPORTED_CPUID hits max entries
  KVM: x86: Refactor loop around do_cpuid_func() to separate helper
  KVM: x86: Simplify handling of Centaur CPUID leafs
  KVM: x86: Clean up error handling in kvm_dev_ioctl_get_cpuid()
  KVM: x86: Check userapce CPUID array size after validating sub-leaf
  KVM: x86: Move CPUID 0xD.1 handling out of the index>0 loop
  KVM: x86: Check for CPUID 0xD.N support before validating array size
  KVM: x86: Warn on zero-size save state for valid CPUID 0xD.N sub-leaf
  KVM: x86: Refactor CPUID 0xD.N sub-leaf entry creation
  KVM: x86: Clean up CPUID 0x7 sub-leaf loop
  KVM: x86: Drop the explicit @index from do_cpuid_7_mask()
  KVM: x86: Drop redundant boot cpu checks on SSBD feature bits
  KVM: x86: Consolidate CPUID array max num entries checking
  KVM: x86: Hoist loop counter and terminator to top of
    __do_cpuid_func()
  KVM: x86: Refactor CPUID 0x4 and 0x8000001d handling
  KVM: x86: Encapsulate CPUID entries and metadata in struct
  KVM: x86: Drop redundant array size check
  KVM: x86: Use common loop iterator when handling CPUID 0xD.N
  KVM: VMX: Add helpers to query Intel PT mode
  KVM: x86: Calculate the supported xcr0 mask at load time
  KVM: x86: Use supported_xcr0 to detect MPX support
  KVM: x86: Make kvm_mpx_supported() an inline function
  KVM: x86: Clear output regs for CPUID 0x14 if PT isn't exposed to
    guest
  KVM: x86: Drop explicit @func param from ->set_supported_cpuid()
  KVM: x86: Use u32 for holding CPUID register value in helpers
  KVM: x86: Replace bare "unsigned" with "unsigned int" in cpuid helpers
  KVM: x86: Introduce cpuid_entry_{get,has}() accessors
  KVM: x86: Introduce cpuid_entry_{change,set,clear}() mutators
  KVM: x86: Refactor cpuid_mask() to auto-retrieve the register
  KVM: x86: Handle MPX CPUID adjustment in VMX code
  KVM: x86: Handle INVPCID CPUID adjustment in VMX code
  KVM: x86: Handle UMIP emulation CPUID adjustment in VMX code
  KVM: x86: Handle PKU CPUID adjustment in VMX code
  KVM: x86: Handle RDTSCP CPUID adjustment in VMX code
  KVM: x86: Handle Intel PT CPUID adjustment in VMX code
  KVM: x86: Handle GBPAGE CPUID adjustment for EPT in VMX code
  KVM: x86: Refactor handling of XSAVES CPUID adjustment
  KVM: x86: Introduce kvm_cpu_caps to replace runtime CPUID masking
  KVM: SVM: Convert feature updates from CPUID to KVM cpu caps
  KVM: VMX: Convert feature updates from CPUID to KVM cpu caps
  KVM: x86: Move XSAVES CPUID adjust to VMX's KVM cpu cap update
  KVM: x86: Add a helper to check kernel support when setting cpu cap
  KVM: x86: Use KVM cpu caps to mark CR4.LA57 as not-reserved
  KVM: x86: Use KVM cpu caps to track UMIP emulation
  KVM: x86: Fold CPUID 0x7 masking back into __do_cpuid_func()
  KVM: x86: Remove the unnecessary loop on CPUID 0x7 sub-leafs
  KVM: x86: Squash CPUID 0x2.0 insanity for modern CPUs
  KVM: x86: Remove stateful CPUID handling
  KVM: x86: Do host CPUID at load time to mask KVM cpu caps
  KVM: x86: Override host CPUID results with kvm_cpu_caps
  KVM: x86: Set emulated/transmuted feature bits via kvm_cpu_caps
  KVM: x86: Use kvm_cpu_caps to detect Intel PT support
  KVM: x86: Do kvm_cpuid_array capacity checks in terminal functions
  KVM: x86: Use KVM cpu caps to detect MSR_TSC_AUX virt support
  KVM: VMX: Directly use VMX capabilities helper to detect RDTSCP
    support
  KVM: x86: Check for Intel PT MSR virtualization using KVM cpu caps
  KVM: VMX: Directly query Intel PT mode when refreshing PMUs
  KVM: SVM: Refactor logging of NPT enabled/disabled
  KVM: x86/mmu: Merge kvm_{enable,disable}_tdp() into a common function
  KVM: x86/mmu: Configure max page level during hardware setup
  KVM: x86: Don't propagate MMU lpage support to memslot.disallow_lpage
  KVM: Drop largepages_enabled and its accessor/mutator
  KVM: x86: Move VMX's host_efer to common x86 code
  KVM: nSVM: Expose SVM features to L1 iff nested is enabled
  KVM: nSVM: Advertise and enable NRIPS for L1 iff nrips is enabled
  KVM: x86: Move nSVM CPUID 0x8000000A handing into common x86 code

 Documentation/virt/kvm/api.rst  |  22 +-
 arch/x86/include/asm/kvm_host.h |  15 +-
 arch/x86/kvm/cpuid.c            | 874 +++++++++++++++-----------------
 arch/x86/kvm/cpuid.h            | 134 ++++-
 arch/x86/kvm/mmu/mmu.c          |  29 +-
 arch/x86/kvm/svm.c              | 130 ++---
 arch/x86/kvm/vmx/capabilities.h |  25 +-
 arch/x86/kvm/vmx/nested.c       |   2 +-
 arch/x86/kvm/vmx/pmu_intel.c    |   2 +-
 arch/x86/kvm/vmx/vmx.c          | 121 +++--
 arch/x86/kvm/vmx/vmx.h          |   5 +-
 arch/x86/kvm/x86.c              |  48 +-
 arch/x86/kvm/x86.h              |  10 +-
 include/linux/kvm_host.h        |   2 -
 virt/kvm/kvm_main.c             |  13 -
 15 files changed, 695 insertions(+), 737 deletions(-)

-- 
2.24.1


             reply	other threads:[~2020-03-03  0:03 UTC|newest]

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-02 23:56 Sean Christopherson [this message]
2020-03-02 23:56 ` [PATCH v2 01/66] KVM: x86: Return -E2BIG when KVM_GET_SUPPORTED_CPUID hits max entries Sean Christopherson
2020-03-03 14:16   ` Paolo Bonzini
2020-03-03 15:17     ` Sean Christopherson
2020-03-03 19:47   ` Jim Mattson
2020-03-02 23:56 ` [PATCH v2 02/66] KVM: x86: Refactor loop around do_cpuid_func() to separate helper Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 03/66] KVM: x86: Simplify handling of Centaur CPUID leafs Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 04/66] KVM: x86: Clean up error handling in kvm_dev_ioctl_get_cpuid() Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 05/66] KVM: x86: Check userapce CPUID array size after validating sub-leaf Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 06/66] KVM: x86: Move CPUID 0xD.1 handling out of the index>0 loop Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 07/66] KVM: x86: Check for CPUID 0xD.N support before validating array size Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 08/66] KVM: x86: Warn on zero-size save state for valid CPUID 0xD.N sub-leaf Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 09/66] KVM: x86: Refactor CPUID 0xD.N sub-leaf entry creation Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 10/66] KVM: x86: Clean up CPUID 0x7 sub-leaf loop Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 11/66] KVM: x86: Drop the explicit @index from do_cpuid_7_mask() Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 12/66] KVM: x86: Drop redundant boot cpu checks on SSBD feature bits Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 13/66] KVM: x86: Consolidate CPUID array max num entries checking Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 14/66] KVM: x86: Hoist loop counter and terminator to top of __do_cpuid_func() Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 15/66] KVM: x86: Refactor CPUID 0x4 and 0x8000001d handling Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 16/66] KVM: x86: Encapsulate CPUID entries and metadata in struct Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 17/66] KVM: x86: Drop redundant array size check Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 18/66] KVM: x86: Use common loop iterator when handling CPUID 0xD.N Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 19/66] KVM: VMX: Add helpers to query Intel PT mode Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 20/66] KVM: x86: Calculate the supported xcr0 mask at load time Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 21/66] KVM: x86: Use supported_xcr0 to detect MPX support Sean Christopherson
2020-03-03 14:34   ` Paolo Bonzini
2020-03-02 23:56 ` [PATCH v2 22/66] KVM: x86: Make kvm_mpx_supported() an inline function Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 23/66] KVM: x86: Clear output regs for CPUID 0x14 if PT isn't exposed to guest Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 24/66] KVM: x86: Drop explicit @func param from ->set_supported_cpuid() Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 25/66] KVM: x86: Use u32 for holding CPUID register value in helpers Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 26/66] KVM: x86: Replace bare "unsigned" with "unsigned int" in cpuid helpers Sean Christopherson
2020-03-03 15:43   ` Vitaly Kuznetsov
2020-03-02 23:56 ` [PATCH v2 27/66] KVM: x86: Introduce cpuid_entry_{get,has}() accessors Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 28/66] KVM: x86: Introduce cpuid_entry_{change,set,clear}() mutators Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 29/66] KVM: x86: Refactor cpuid_mask() to auto-retrieve the register Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 30/66] KVM: x86: Handle MPX CPUID adjustment in VMX code Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 31/66] KVM: x86: Handle INVPCID " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 32/66] KVM: x86: Handle UMIP emulation " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 33/66] KVM: x86: Handle PKU " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 34/66] KVM: x86: Handle RDTSCP " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 35/66] KVM: x86: Handle Intel PT " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 36/66] KVM: x86: Handle GBPAGE CPUID adjustment for EPT " Sean Christopherson
2020-03-03 14:59   ` Paolo Bonzini
2020-03-03 15:35     ` Sean Christopherson
2020-03-03 15:40       ` Paolo Bonzini
2020-03-03 15:44         ` Sean Christopherson
2020-03-03 15:47           ` Paolo Bonzini
2020-03-03 15:54             ` Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 37/66] KVM: x86: Refactor handling of XSAVES CPUID adjustment Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 38/66] KVM: x86: Introduce kvm_cpu_caps to replace runtime CPUID masking Sean Christopherson
2020-03-03 15:51   ` Vitaly Kuznetsov
2020-03-02 23:56 ` [PATCH v2 39/66] KVM: SVM: Convert feature updates from CPUID to KVM cpu caps Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 40/66] KVM: VMX: " Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 41/66] KVM: x86: Move XSAVES CPUID adjust to VMX's KVM cpu cap update Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 42/66] KVM: x86: Add a helper to check kernel support when setting cpu cap Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 43/66] KVM: x86: Use KVM cpu caps to mark CR4.LA57 as not-reserved Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 44/66] KVM: x86: Use KVM cpu caps to track UMIP emulation Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 45/66] KVM: x86: Fold CPUID 0x7 masking back into __do_cpuid_func() Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 46/66] KVM: x86: Remove the unnecessary loop on CPUID 0x7 sub-leafs Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 47/66] KVM: x86: Squash CPUID 0x2.0 insanity for modern CPUs Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 48/66] KVM: x86: Remove stateful CPUID handling Sean Christopherson
2020-03-03 15:59   ` Vitaly Kuznetsov
2020-03-03 19:23   ` Jim Mattson
2020-03-02 23:56 ` [PATCH v2 49/66] KVM: x86: Do host CPUID at load time to mask KVM cpu caps Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 50/66] KVM: x86: Override host CPUID results with kvm_cpu_caps Sean Christopherson
2020-03-03 15:22   ` Paolo Bonzini
2020-03-03 15:56     ` Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 51/66] KVM: x86: Set emulated/transmuted feature bits via kvm_cpu_caps Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 52/66] KVM: x86: Use kvm_cpu_caps to detect Intel PT support Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 53/66] KVM: x86: Do kvm_cpuid_array capacity checks in terminal functions Sean Christopherson
2020-03-03 16:03   ` Vitaly Kuznetsov
2020-03-02 23:56 ` [PATCH v2 54/66] KVM: x86: Use KVM cpu caps to detect MSR_TSC_AUX virt support Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 55/66] KVM: VMX: Directly use VMX capabilities helper to detect RDTSCP support Sean Christopherson
2020-03-02 23:56 ` [PATCH v2 56/66] KVM: x86: Check for Intel PT MSR virtualization using KVM cpu caps Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 57/66] KVM: VMX: Directly query Intel PT mode when refreshing PMUs Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 58/66] KVM: SVM: Refactor logging of NPT enabled/disabled Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 59/66] KVM: x86/mmu: Merge kvm_{enable,disable}_tdp() into a common function Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 60/66] KVM: x86/mmu: Configure max page level during hardware setup Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 61/66] KVM: x86: Don't propagate MMU lpage support to memslot.disallow_lpage Sean Christopherson
2020-03-03 15:31   ` Paolo Bonzini
2020-03-03 16:00     ` Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 62/66] KVM: Drop largepages_enabled and its accessor/mutator Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 63/66] KVM: x86: Move VMX's host_efer to common x86 code Sean Christopherson
2020-03-02 23:57 ` [PATCH v2 64/66] KVM: nSVM: Expose SVM features to L1 iff nested is enabled Sean Christopherson
2020-03-03 16:12   ` Vitaly Kuznetsov
2020-03-03 18:37   ` Jim Mattson
2020-03-02 23:57 ` [PATCH v2 65/66] KVM: nSVM: Advertise and enable NRIPS for L1 iff nrips " Sean Christopherson
2020-03-03 16:14   ` Vitaly Kuznetsov
2020-03-02 23:57 ` [PATCH v2 66/66] KVM: x86: Move nSVM CPUID 0x8000000A handing into common x86 code Sean Christopherson
2020-03-03 15:35   ` Paolo Bonzini
2020-03-03 15:37     ` Sean Christopherson
2020-03-03 16:48 ` [PATCH v2 00/66] KVM: x86: Introduce KVM cpu caps Vitaly Kuznetsov
2020-03-06  8:27 ` Paolo Bonzini
2020-03-09 20:11   ` Sean Christopherson
2020-03-11 18:37     ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200302235709.27467-1-sean.j.christopherson@intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    --cc=xiaoyao.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).