* [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
@ 2019-08-30 18:45 Thomas Huth
2019-09-06 9:43 ` David Hildenbrand
2019-09-10 14:50 ` Paolo Bonzini
0 siblings, 2 replies; 6+ messages in thread
From: Thomas Huth @ 2019-08-30 18:45 UTC (permalink / raw)
To: kvm, Radim Krčmář, Paolo Bonzini
Cc: David Hildenbrand, Drew Jones, Laurent Vivier, Alex Bennée
Currently the tests at the end of the .travis.yml script are ignored,
since we can not use KVM in the Travis containers. But we can actually
run of some of the kvm-unit-tests with TCG instead, to make sure that
the binaries are not completely broken.
Thus introduce a new TESTS variable that lists the tests which we can
run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
need some extra love: The ppc64 version only works with the additional
"cap-htm=off" setting. And the s390x package lacks the firmware and
refuses to work unless we provide a fake firmware file here. Any file
works since the firmware is skipped when "-kernel" is used, so we can
simply use one of the pre-existing files in the source tree.
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
.travis.yml | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/.travis.yml b/.travis.yml
index a4a165d..6c14953 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -20,24 +20,40 @@ env:
matrix:
- CONFIG=""
BUILD_DIR="."
+ TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
+ vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
- CONFIG=""
BUILD_DIR="x86-builddir"
+ TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
+ tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
- CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
BUILD_DIR="."
+ TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
- CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
BUILD_DIR="arm-buildir"
+ TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
- CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
BUILD_DIR="."
+ TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
- CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
BUILD_DIR="arm64-buildir"
+ TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
- CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
BUILD_DIR="."
+ TESTS="spapr_hcall emulator rtas-set-time-of-day"
+ ACCEL="tcg,cap-htm=off"
- CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
BUILD_DIR="ppc64le-buildir"
+ TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
+ ACCEL="tcg,cap-htm=off"
- CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
BUILD_DIR="."
+ TESTS="diag10 diag308"
+ ACCEL="tcg,firmware=s390x/run"
- CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
BUILD_DIR="s390x-builddir"
+ TESTS="sieve"
+ ACCEL="tcg,firmware=s390x/run"
before_script:
- mkdir -p $BUILD_DIR && cd $BUILD_DIR
@@ -45,4 +61,5 @@ before_script:
- if [ -e ../configure ]; then ../configure $CONFIG ; fi
script:
- make -j3
- - ./run_tests.sh || true
+ - ACCEL="${ACCEL:-tcg}" ./run_tests.sh -v $TESTS | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
--
2.18.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
2019-08-30 18:45 [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG Thomas Huth
@ 2019-09-06 9:43 ` David Hildenbrand
2019-09-06 9:54 ` Thomas Huth
2019-09-10 14:50 ` Paolo Bonzini
1 sibling, 1 reply; 6+ messages in thread
From: David Hildenbrand @ 2019-09-06 9:43 UTC (permalink / raw)
To: Thomas Huth, kvm, Radim Krčmář, Paolo Bonzini
Cc: Drew Jones, Laurent Vivier, Alex Bennée
On 30.08.19 20:45, Thomas Huth wrote:
> Currently the tests at the end of the .travis.yml script are ignored,
> since we can not use KVM in the Travis containers. But we can actually
> run of some of the kvm-unit-tests with TCG instead, to make sure that
> the binaries are not completely broken.
> Thus introduce a new TESTS variable that lists the tests which we can
> run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
> need some extra love: The ppc64 version only works with the additional
> "cap-htm=off" setting. And the s390x package lacks the firmware and
> refuses to work unless we provide a fake firmware file here. Any file
> works since the firmware is skipped when "-kernel" is used, so we can
> simply use one of the pre-existing files in the source tree.
>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
> .travis.yml | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/.travis.yml b/.travis.yml
> index a4a165d..6c14953 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -20,24 +20,40 @@ env:
> matrix:
> - CONFIG=""
> BUILD_DIR="."
> + TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
> + vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
> - CONFIG=""
> BUILD_DIR="x86-builddir"
> + TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
> + tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
> BUILD_DIR="."
> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
> BUILD_DIR="arm-buildir"
> + TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
> BUILD_DIR="."
> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
> BUILD_DIR="arm64-buildir"
> + TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
> BUILD_DIR="."
> + TESTS="spapr_hcall emulator rtas-set-time-of-day"
> + ACCEL="tcg,cap-htm=off"
> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
> BUILD_DIR="ppc64le-buildir"
> + TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
> + ACCEL="tcg,cap-htm=off"
> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
> BUILD_DIR="."
> + TESTS="diag10 diag308"
> + ACCEL="tcg,firmware=s390x/run"
> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
> BUILD_DIR="s390x-builddir"
> + TESTS="sieve"
> + ACCEL="tcg,firmware=s390x/run"
What about the other s390x tests? (is the QEMU binary too old to make
them pass?)
The issue with TCG is that you can easily get false negatives in case
the QEMU binary changes (e.g., new Ubuntu release).
"to make sure that the binaries are not completely broken" - while I
understand the intuition behind that, I wonder if this is relevant in
practice (especially, somebody committing changes without testing them,
especially, under KVM). As long as the false negatives here don't hurt,
I guess this change is fine.
>
> before_script:
> - mkdir -p $BUILD_DIR && cd $BUILD_DIR
> @@ -45,4 +61,5 @@ before_script:
> - if [ -e ../configure ]; then ../configure $CONFIG ; fi
> script:
> - make -j3
> - - ./run_tests.sh || true
> + - ACCEL="${ACCEL:-tcg}" ./run_tests.sh -v $TESTS | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
>
--
Thanks,
David / dhildenb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
2019-09-06 9:43 ` David Hildenbrand
@ 2019-09-06 9:54 ` Thomas Huth
2019-09-06 10:02 ` David Hildenbrand
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Huth @ 2019-09-06 9:54 UTC (permalink / raw)
To: David Hildenbrand, kvm, Radim Krčmář, Paolo Bonzini
Cc: Drew Jones, Laurent Vivier, Alex Bennée
On 06/09/2019 11.43, David Hildenbrand wrote:
> On 30.08.19 20:45, Thomas Huth wrote:
>> Currently the tests at the end of the .travis.yml script are ignored,
>> since we can not use KVM in the Travis containers. But we can actually
>> run of some of the kvm-unit-tests with TCG instead, to make sure that
>> the binaries are not completely broken.
>> Thus introduce a new TESTS variable that lists the tests which we can
>> run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
>> need some extra love: The ppc64 version only works with the additional
>> "cap-htm=off" setting. And the s390x package lacks the firmware and
>> refuses to work unless we provide a fake firmware file here. Any file
>> works since the firmware is skipped when "-kernel" is used, so we can
>> simply use one of the pre-existing files in the source tree.
>>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>> .travis.yml | 19 ++++++++++++++++++-
>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>
>> diff --git a/.travis.yml b/.travis.yml
>> index a4a165d..6c14953 100644
>> --- a/.travis.yml
>> +++ b/.travis.yml
>> @@ -20,24 +20,40 @@ env:
>> matrix:
>> - CONFIG=""
>> BUILD_DIR="."
>> + TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
>> + vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
>> - CONFIG=""
>> BUILD_DIR="x86-builddir"
>> + TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
>> + tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>> BUILD_DIR="."
>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>> BUILD_DIR="arm-buildir"
>> + TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>> BUILD_DIR="."
>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>> BUILD_DIR="arm64-buildir"
>> + TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>> BUILD_DIR="."
>> + TESTS="spapr_hcall emulator rtas-set-time-of-day"
>> + ACCEL="tcg,cap-htm=off"
>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>> BUILD_DIR="ppc64le-buildir"
>> + TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
>> + ACCEL="tcg,cap-htm=off"
>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>> BUILD_DIR="."
>> + TESTS="diag10 diag308"
>> + ACCEL="tcg,firmware=s390x/run"
>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>> BUILD_DIR="s390x-builddir"
>> + TESTS="sieve"
>> + ACCEL="tcg,firmware=s390x/run"
>
> What about the other s390x tests? (is the QEMU binary too old to make
> them pass?)
Yes. All the others are failing.
> The issue with TCG is that you can easily get false negatives in case
> the QEMU binary changes (e.g., new Ubuntu release).
That should not be a big deal, since the Ubuntu version is locked to a
certain release in the travis.yml file. So we should not get a new
version of QEMU by accident here, only if we explicitly update the
"dist:" line in the yml file.
> "to make sure that the binaries are not completely broken" - while I
> understand the intuition behind that, I wonder if this is relevant in
> practice
Well, the test coverage here is certainly far from being perfect, but
it's still better than nothing. Imagine one of the patches changes
common code in the lib/ folder and it only works on one architecture
that the author tested. Chances are quite good that we detect that
problem with this patch now.
Thomas
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
2019-09-06 9:54 ` Thomas Huth
@ 2019-09-06 10:02 ` David Hildenbrand
2019-09-06 10:10 ` Thomas Huth
0 siblings, 1 reply; 6+ messages in thread
From: David Hildenbrand @ 2019-09-06 10:02 UTC (permalink / raw)
To: Thomas Huth, kvm, Radim Krčmář, Paolo Bonzini
Cc: Drew Jones, Laurent Vivier, Alex Bennée
On 06.09.19 11:54, Thomas Huth wrote:
> On 06/09/2019 11.43, David Hildenbrand wrote:
>> On 30.08.19 20:45, Thomas Huth wrote:
>>> Currently the tests at the end of the .travis.yml script are ignored,
>>> since we can not use KVM in the Travis containers. But we can actually
>>> run of some of the kvm-unit-tests with TCG instead, to make sure that
>>> the binaries are not completely broken.
>>> Thus introduce a new TESTS variable that lists the tests which we can
>>> run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
>>> need some extra love: The ppc64 version only works with the additional
>>> "cap-htm=off" setting. And the s390x package lacks the firmware and
>>> refuses to work unless we provide a fake firmware file here. Any file
>>> works since the firmware is skipped when "-kernel" is used, so we can
>>> simply use one of the pre-existing files in the source tree.
>>>
>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>> ---
>>> .travis.yml | 19 ++++++++++++++++++-
>>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/.travis.yml b/.travis.yml
>>> index a4a165d..6c14953 100644
>>> --- a/.travis.yml
>>> +++ b/.travis.yml
>>> @@ -20,24 +20,40 @@ env:
>>> matrix:
>>> - CONFIG=""
>>> BUILD_DIR="."
>>> + TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
>>> + vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
>>> - CONFIG=""
>>> BUILD_DIR="x86-builddir"
>>> + TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
>>> + tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
>>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>>> BUILD_DIR="."
>>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>>> BUILD_DIR="arm-buildir"
>>> + TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
>>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>>> BUILD_DIR="."
>>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>>> BUILD_DIR="arm64-buildir"
>>> + TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
>>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>>> BUILD_DIR="."
>>> + TESTS="spapr_hcall emulator rtas-set-time-of-day"
>>> + ACCEL="tcg,cap-htm=off"
>>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>>> BUILD_DIR="ppc64le-buildir"
>>> + TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
>>> + ACCEL="tcg,cap-htm=off"
>>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>>> BUILD_DIR="."
>>> + TESTS="diag10 diag308"
>>> + ACCEL="tcg,firmware=s390x/run"
>>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>>> BUILD_DIR="s390x-builddir"
>>> + TESTS="sieve"
>>> + ACCEL="tcg,firmware=s390x/run"
>>
>> What about the other s390x tests? (is the QEMU binary too old to make
>> them pass?)
>
> Yes. All the others are failing.
So the QEMU versions is that old that not even the selftest works? :/ Is
there a more recent distribution we can use?
>
>> The issue with TCG is that you can easily get false negatives in case
>> the QEMU binary changes (e.g., new Ubuntu release).
>
> That should not be a big deal, since the Ubuntu version is locked to a
> certain release in the travis.yml file. So we should not get a new
> version of QEMU by accident here, only if we explicitly update the
> "dist:" line in the yml file.
Or if the dist updates QEMU. Not sure how often that happens in QEMU.
(but as not even the selfest passes, it cannot really get any worse :D )
>
>> "to make sure that the binaries are not completely broken" - while I
>> understand the intuition behind that, I wonder if this is relevant in
>> practice
> Well, the test coverage here is certainly far from being perfect, but
> it's still better than nothing. Imagine one of the patches changes
> common code in the lib/ folder and it only works on one architecture
> that the author tested. Chances are quite good that we detect that
> problem with this patch now.
Better than nothing I guess.
--
Thanks,
David / dhildenb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
2019-09-06 10:02 ` David Hildenbrand
@ 2019-09-06 10:10 ` Thomas Huth
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Huth @ 2019-09-06 10:10 UTC (permalink / raw)
To: David Hildenbrand, kvm, Radim Krčmář, Paolo Bonzini
Cc: Drew Jones, Laurent Vivier, Alex Bennée
On 06/09/2019 12.02, David Hildenbrand wrote:
> On 06.09.19 11:54, Thomas Huth wrote:
>> On 06/09/2019 11.43, David Hildenbrand wrote:
>>> On 30.08.19 20:45, Thomas Huth wrote:
>>>> Currently the tests at the end of the .travis.yml script are ignored,
>>>> since we can not use KVM in the Travis containers. But we can actually
>>>> run of some of the kvm-unit-tests with TCG instead, to make sure that
>>>> the binaries are not completely broken.
>>>> Thus introduce a new TESTS variable that lists the tests which we can
>>>> run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
>>>> need some extra love: The ppc64 version only works with the additional
>>>> "cap-htm=off" setting. And the s390x package lacks the firmware and
>>>> refuses to work unless we provide a fake firmware file here. Any file
>>>> works since the firmware is skipped when "-kernel" is used, so we can
>>>> simply use one of the pre-existing files in the source tree.
>>>>
>>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>>> ---
>>>> .travis.yml | 19 ++++++++++++++++++-
>>>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/.travis.yml b/.travis.yml
>>>> index a4a165d..6c14953 100644
>>>> --- a/.travis.yml
>>>> +++ b/.travis.yml
>>>> @@ -20,24 +20,40 @@ env:
>>>> matrix:
>>>> - CONFIG=""
>>>> BUILD_DIR="."
>>>> + TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
>>>> + vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
>>>> - CONFIG=""
>>>> BUILD_DIR="x86-builddir"
>>>> + TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
>>>> + tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
>>>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>>>> BUILD_DIR="."
>>>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>>>> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
>>>> BUILD_DIR="arm-buildir"
>>>> + TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
>>>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>>>> BUILD_DIR="."
>>>> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
>>>> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
>>>> BUILD_DIR="arm64-buildir"
>>>> + TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
>>>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>>>> BUILD_DIR="."
>>>> + TESTS="spapr_hcall emulator rtas-set-time-of-day"
>>>> + ACCEL="tcg,cap-htm=off"
>>>> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
>>>> BUILD_DIR="ppc64le-buildir"
>>>> + TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
>>>> + ACCEL="tcg,cap-htm=off"
>>>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>>>> BUILD_DIR="."
>>>> + TESTS="diag10 diag308"
>>>> + ACCEL="tcg,firmware=s390x/run"
>>>> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
>>>> BUILD_DIR="s390x-builddir"
>>>> + TESTS="sieve"
>>>> + ACCEL="tcg,firmware=s390x/run"
>>>
>>> What about the other s390x tests? (is the QEMU binary too old to make
>>> them pass?)
>>
>> Yes. All the others are failing.
>
> So the QEMU versions is that old that not even the selftest works? :/ Is
> there a more recent distribution we can use?
I already tested with "dist: bionic", and that's all I've got to get
working there. According to
https://docs.travis-ci.com/user/reference/overview/ there are no newer
distros available yet.
>>> The issue with TCG is that you can easily get false negatives in case
>>> the QEMU binary changes (e.g., new Ubuntu release).
>>
>> That should not be a big deal, since the Ubuntu version is locked to a
>> certain release in the travis.yml file. So we should not get a new
>> version of QEMU by accident here, only if we explicitly update the
>> "dist:" line in the yml file.
>
> Or if the dist updates QEMU. Not sure how often that happens in QEMU.
> (but as not even the selfest passes, it cannot really get any worse :D )
I don't think that they will update the QEMU version during the
life-cycle of a certain release - they likely only apply some bug fixes,
which won't change much of the behavior here. Remember that
qemu-system-s390x is almost completely broken in these Ubuntu versions
since they do not ship the firmware image in the package. I only got
something running by luck with that "firmware=..." trick.
Thomas
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG
2019-08-30 18:45 [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG Thomas Huth
2019-09-06 9:43 ` David Hildenbrand
@ 2019-09-10 14:50 ` Paolo Bonzini
1 sibling, 0 replies; 6+ messages in thread
From: Paolo Bonzini @ 2019-09-10 14:50 UTC (permalink / raw)
To: Thomas Huth, kvm, Radim Krčmář
Cc: David Hildenbrand, Drew Jones, Laurent Vivier, Alex Bennée
On 30/08/19 20:45, Thomas Huth wrote:
> Currently the tests at the end of the .travis.yml script are ignored,
> since we can not use KVM in the Travis containers. But we can actually
> run of some of the kvm-unit-tests with TCG instead, to make sure that
> the binaries are not completely broken.
> Thus introduce a new TESTS variable that lists the tests which we can
> run with TCG. Unfortunately, the ppc64 and s390x QEMUs in Ubuntu also
> need some extra love: The ppc64 version only works with the additional
> "cap-htm=off" setting. And the s390x package lacks the firmware and
> refuses to work unless we provide a fake firmware file here. Any file
> works since the firmware is skipped when "-kernel" is used, so we can
> simply use one of the pre-existing files in the source tree.
>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
> .travis.yml | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/.travis.yml b/.travis.yml
> index a4a165d..6c14953 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -20,24 +20,40 @@ env:
> matrix:
> - CONFIG=""
> BUILD_DIR="."
> + TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
> + vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
> - CONFIG=""
> BUILD_DIR="x86-builddir"
> + TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
> + tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
> BUILD_DIR="."
> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
> - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
> BUILD_DIR="arm-buildir"
> + TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
> BUILD_DIR="."
> + TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
> - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
> BUILD_DIR="arm64-buildir"
> + TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
> BUILD_DIR="."
> + TESTS="spapr_hcall emulator rtas-set-time-of-day"
> + ACCEL="tcg,cap-htm=off"
> - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
> BUILD_DIR="ppc64le-buildir"
> + TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
> + ACCEL="tcg,cap-htm=off"
> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
> BUILD_DIR="."
> + TESTS="diag10 diag308"
> + ACCEL="tcg,firmware=s390x/run"
> - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
> BUILD_DIR="s390x-builddir"
> + TESTS="sieve"
> + ACCEL="tcg,firmware=s390x/run"
>
> before_script:
> - mkdir -p $BUILD_DIR && cd $BUILD_DIR
> @@ -45,4 +61,5 @@ before_script:
> - if [ -e ../configure ]; then ../configure $CONFIG ; fi
> script:
> - make -j3
> - - ./run_tests.sh || true
> + - ACCEL="${ACCEL:-tcg}" ./run_tests.sh -v $TESTS | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
>
Queued, thanks.
Paolo
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-09-10 14:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-30 18:45 [kvm-unit-tests PATCH] travis.yml: Enable running of tests with TCG Thomas Huth
2019-09-06 9:43 ` David Hildenbrand
2019-09-06 9:54 ` Thomas Huth
2019-09-06 10:02 ` David Hildenbrand
2019-09-06 10:10 ` Thomas Huth
2019-09-10 14:50 ` Paolo Bonzini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).