* [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
@ 2009-04-04 3:02 SourceForge.net
0 siblings, 0 replies; 5+ messages in thread
From: SourceForge.net @ 2009-04-04 3:02 UTC (permalink / raw)
To: noreply
Bugs item #2729621, was opened at 2009-04-03 21:02
Message generated for change (Tracker Item Submitted) made by byron_clark
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails
Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003
I get the following error:
usb_linux_update_endp_table: Broken pipe
strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2) = 27
fcntl(27, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27) = 0
cpu:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 2194.427
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 4388.85
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
host distribution: debian sid
bitness: 64
guest distribution: windows xp
bitness: 32
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
@ 2011-03-03 11:39 SourceForge.net
0 siblings, 0 replies; 5+ messages in thread
From: SourceForge.net @ 2011-03-03 11:39 UTC (permalink / raw)
To: noreply
Bugs item #2729621, was opened at 2009-04-04 05:02
Message generated for change (Comment added) made by jessorensen
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails
Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003
I get the following error:
usb_linux_update_endp_table: Broken pipe
strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2) = 27
fcntl(27, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27) = 0
cpu:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 2194.427
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 4388.85
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
host distribution: debian sid
bitness: 64
guest distribution: windows xp
bitness: 32
----------------------------------------------------------------------
>Comment By: Jes Sorensen (jessorensen)
Date: 2011-03-03 12:39
Message:
Last comment is a bit unclear - can you confirm that this actually works?
Thanks,
Jes
----------------------------------------------------------------------
Comment By: Nicholas J Kreucher (kreucher)
Date: 2009-12-03 20:18
Message:
Scratch the hal comment... it actually works perfectly :)
----------------------------------------------------------------------
Comment By: Nicholas J Kreucher (kreucher)
Date: 2009-12-03 20:05
Message:
Perhaps this is a usb serial device? Seems there is a workaround for such
devices here:
http://ubuntuforums.org/archive/index.php/t-910796.html
See IntuitiveNipple's Sep 7th post. The patch worked for me (sort of, the
guest device now exists and works, but the hal properties don't seem to be
populated correctly).
----------------------------------------------------------------------
Comment By: Byron Clark (byron_clark)
Date: 2009-04-04 05:08
Message:
kvm-84, kernel 2.6.29.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
@ 2009-12-03 19:18 SourceForge.net
0 siblings, 0 replies; 5+ messages in thread
From: SourceForge.net @ 2009-12-03 19:18 UTC (permalink / raw)
To: noreply
Bugs item #2729621, was opened at 2009-04-03 23:02
Message generated for change (Comment added) made by kreucher
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails
Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003
I get the following error:
usb_linux_update_endp_table: Broken pipe
strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2) = 27
fcntl(27, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27) = 0
cpu:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 2194.427
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 4388.85
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
host distribution: debian sid
bitness: 64
guest distribution: windows xp
bitness: 32
----------------------------------------------------------------------
Comment By: Nicholas J Kreucher (kreucher)
Date: 2009-12-03 14:18
Message:
Scratch the hal comment... it actually works perfectly :)
----------------------------------------------------------------------
Comment By: Nicholas J Kreucher (kreucher)
Date: 2009-12-03 14:05
Message:
Perhaps this is a usb serial device? Seems there is a workaround for such
devices here:
http://ubuntuforums.org/archive/index.php/t-910796.html
See IntuitiveNipple's Sep 7th post. The patch worked for me (sort of, the
guest device now exists and works, but the hal properties don't seem to be
populated correctly).
----------------------------------------------------------------------
Comment By: Byron Clark (byron_clark)
Date: 2009-04-03 23:08
Message:
kvm-84, kernel 2.6.29.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
@ 2009-12-03 19:05 SourceForge.net
0 siblings, 0 replies; 5+ messages in thread
From: SourceForge.net @ 2009-12-03 19:05 UTC (permalink / raw)
To: noreply
Bugs item #2729621, was opened at 2009-04-03 23:02
Message generated for change (Comment added) made by kreucher
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails
Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003
I get the following error:
usb_linux_update_endp_table: Broken pipe
strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2) = 27
fcntl(27, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27) = 0
cpu:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 2194.427
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 4388.85
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
host distribution: debian sid
bitness: 64
guest distribution: windows xp
bitness: 32
----------------------------------------------------------------------
Comment By: Nicholas J Kreucher (kreucher)
Date: 2009-12-03 14:05
Message:
Perhaps this is a usb serial device? Seems there is a workaround for such
devices here:
http://ubuntuforums.org/archive/index.php/t-910796.html
See IntuitiveNipple's Sep 7th post. The patch worked for me (sort of, the
guest device now exists and works, but the hal properties don't seem to be
populated correctly).
----------------------------------------------------------------------
Comment By: Byron Clark (byron_clark)
Date: 2009-04-03 23:08
Message:
kvm-84, kernel 2.6.29.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ kvm-Bugs-2729621 ] usb_add on garmin gps fails
@ 2009-04-04 3:08 SourceForge.net
0 siblings, 0 replies; 5+ messages in thread
From: SourceForge.net @ 2009-04-04 3:08 UTC (permalink / raw)
To: noreply
Bugs item #2729621, was opened at 2009-04-03 21:02
Message generated for change (Comment added) made by byron_clark
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: qemu
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Byron Clark (byron_clark)
Assigned to: Nobody/Anonymous (nobody)
Summary: usb_add on garmin gps fails
Initial Comment:
When I attempt to usb_add my Garmin Venture HC GPS with this command:
usb_add host:091e:0003
I get the following error:
usb_linux_update_endp_table: Broken pipe
strace log:
write(1, "husb: open device 5.3\n", 22) = 22
open("/proc/bus/usb/005/003", O_RDWR|O_NONBLOCK) = 26
read(26, "\22\1\20\1\377\377\377@\36\t\3\0\1\0\0\0\0\1\t\2'\0\1\1\0\300\0\t\4\0\0\3"..., 1024) = 57
write(1, "husb: config #1 need -1\n", 24) = 24
ioctl(26, USBDEVFS_IOCTL, 0x7fff0bb74300) = -1 ENODATA (No data available)
ioctl(26, USBDEVFS_CLAIMINTERFACE, 0x7fff0bb7431c) = 0
write(1, "husb: 1 interfaces claimed for c"..., 47) = 47
ioctl(26, USBDEVFS_CONNECTINFO, 0x7fff0bb74750) = 0
write(1, "husb: grabbed usb device 5.3\n", 29) = 29
ioctl(26, USBDEVFS_CONTROL, 0x7fff0bb742f0) = -1 EPIPE (Broken pipe)
dup(2) = 27
fcntl(27, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fstat(27, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4e03b67000
lseek(27, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(27, "usb_linux_update_endp_table: Bro"..., 41) = 41
close(27) = 0
cpu:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
stepping : 11
cpu MHz : 2194.427
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority
bogomips : 4388.85
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
host distribution: debian sid
bitness: 64
guest distribution: windows xp
bitness: 32
----------------------------------------------------------------------
>Comment By: Byron Clark (byron_clark)
Date: 2009-04-03 21:08
Message:
kvm-84, kernel 2.6.29.
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2729621&group_id=180599
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-03-03 11:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-04-04 3:02 [ kvm-Bugs-2729621 ] usb_add on garmin gps fails SourceForge.net
2009-04-04 3:08 SourceForge.net
2009-12-03 19:05 SourceForge.net
2009-12-03 19:18 SourceForge.net
2011-03-03 11:39 SourceForge.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).