Re: [PATCH kvm/queue v2 2/3] perf: x86/core: Add interface to query perfmon_event_map[] directly

["Liang, Kan" <kan.liang@linux.intel.com>]

On 2/10/2022 11:34 AM, Jim Mattson wrote:
> On Thu, Feb 10, 2022 at 7:34 AM Liang, Kan <kan.liang@linux.intel.com> wrote:
>>
>>
>>
>> On 2/9/2022 2:24 PM, David Dunn wrote:
>>> Dave,
>>>
>>> In my opinion, the right policy depends on what the host owner and
>>> guest owner are trying to achieve.
>>>
>>> If the PMU is being used to locate places where performance could be
>>> improved in the system, there are two sub scenarios:
>>>      - The host and guest are owned by same entity that is optimizing
>>> overall system.  In this case, the guest doesn't need PMU access and
>>> better information is provided by profiling the entire system from the
>>> host.
>>>      - The host and guest are owned by different entities.  In this
>>> case, profiling from the host can identify perf issues in the guest.
>>> But what action can be taken?  The host entity must communicate issues
>>> back to the guest owner through some sort of out-of-band information
>>> channel.  On the other hand, preempting the host PMU to give the guest
>>> a fully functional PMU serves this use case well.
>>>
>>> TDX and SGX (outside of debug mode) strongly assume different
>>> entities.  And Intel is doing this to reduce insight of the host into
>>> guest operations.  So in my opinion, preemption makes sense.
>>>
>>> There are also scenarios where the host owner is trying to identify
>>> systemwide impacts of guest actions.  For example, detecting memory
>>> bandwidth consumption or split locks.  In this case, host control
>>> without preemption is necessary.
>>>
>>> To address these various scenarios, it seems like the host needs to be
>>> able to have policy control on whether it is willing to have the PMU
>>> preempted by the guest.
>>>
>>> But I don't see what scenario is well served by the current situation
>>> in KVM.  Currently the guest will either be told it has no PMU (which
>>> is fine) or that it has full control of a PMU.  If the guest is told
>>> it has full control of the PMU, it actually doesn't.  But instead of
>>> losing counters on well defined events (from the guest perspective),
>>> they simply stop counting depending on what the host is doing with the
>>> PMU.
>>
>> For the current perf subsystem, a PMU should be shared among different
>> users via the multiplexing mechanism if the resource is limited. No one
>> has full control of a PMU for lifetime. A user can only have the PMU in
>> its given period. I think the user can understand how long it runs via
>> total_time_enabled and total_time_running.
> 
> For most clients, yes. For kvm, no. KVM currently tosses
> total_time_enabled and total_time_running in the bitbucket. It could
> extrapolate, but that would result in loss of precision. Some guest
> uses of the PMU would not be able to cope (e.g.
> https://github.com/rr-debugger/rr).
> 
>> For a guest, it should rely on the host to tell whether the PMU resource
>> is available. But unfortunately, I don't think we have such a
>> notification mechanism in KVM. The guest has the wrong impression that
>> the guest can have full control of the PMU.
> 
> That is the only impression that the architectural specification
> allows the guest to have. On Intel, we can mask off individual fixed
> counters, and we can reduce the number of GP counters, but AMD offers
> us no such freedom. Whatever resources we advertise to the guest must
> be available for its use whenever it wants. Otherwise, PMU
> virtualization is simply broken.
> 
>> In my opinion, we should add the notification mechanism in KVM. When the
>> PMU resource is limited, the guest can know whether it's multiplexing or
>> can choose to reschedule the event.
> 
> That sounds like a paravirtual perf mechanism, rather than PMU
> virtualization. Are you suggesting that we not try to virtualize the
> PMU? Unfortunately, PMU virtualization is what we have customers
> clamoring for. No one is interested in a paravirtual perf mechanism.
> For example, when will VTune in the guest know how to use your
> proposed paravirtual interface?

OK. If KVM cannot notify the guest, maybe guest can query the usage of 
counters before using a counter. There is a IA32_PERF_GLOBAL_INUSE MSR 
introduced with Arch perfmon v4. The MSR provides an "InUse" bit for 
each counters. But it cannot guarantee that the counter can always be 
owned by the guest unless the host treats the guest as a super-user and 
agrees to not touch its counter. This should only works for the Intel 
platforms.

> 
>> But seems the notification mechanism may not work for TDX case?
>>>
>>> On the other hand, if we flip it around the semantics are more clear.
>>> A guest will be told it has no PMU (which is fine) or that it has full
>>> control of the PMU.  If the guest is told that it has full control of
>>> the PMU, it does.  And the host (which is the thing that granted the
>>> full PMU to the guest) knows that events inside the guest are not
>>> being measured.  This results in all entities seeing something that
>>> can be reasoned about from their perspective.
>>>
>>
>> I assume that this is for the TDX case (where the notification mechanism
>>    doesn't work). The host still control all the PMU resources. The TDX
>> guest is treated as a super-user who can 'own' a PMU. The admin in the
>> host can configure/change the owned PMUs of the TDX. Personally, I think
>> it makes sense. But please keep in mind that the counters are not
>> identical. There are some special events that can only run on a specific
>> counter. If the special counter is assigned to TDX, other entities can
>> never run some events. We should let other entities know if it happens.
>> Or we should never let non-host entities own the special counter.
> 
> Right; the counters are not fungible. Ideally, when the guest requests
> a particular counter, that is the counter it gets. If it is given a
> different counter, the counter it is given must provide the same
> behavior as the requested counter for the event in question.

Ideally, Yes, but sometimes KVM/host may not know whether they can use 
another counter to replace the requested counter, because KVM/host 
cannot retrieve the event constraint information from guest.

For example, we have Precise Distribution (PDist) feature enabled only 
for the GP counter 0 on SPR. Perf uses the precise_level 3 (a SW 
variable) to indicate the feature. For the KVM/host, they never know 
whether the guest apply the PDist feature.

I have a patch that forces the perf scheduler starts from the regular 
counters, which may mitigates the issue, but cannot fix it. (I will post 
the patch separately.)

Or we should never let the guest own the special counters. Although the 
guest has to lose some special events, I guess the host may more likely 
be willing to let the guest own a regular counter.


Thanks,
Kan

> 
>>
>> Thanks,
>> Kan
>>
>>> Thanks,
>>>
>>> Dave Dunn
>>>
>>> On Wed, Feb 9, 2022 at 10:57 AM Dave Hansen <dave.hansen@intel.com> wrote:
>>>
>>>>> I was referring to gaps in the collection of data that the host perf
>>>>> subsystem doesn't know about if ATTRIBUTES.PERFMON is set for a TDX
>>>>> guest. This can potentially be a problem if someone is trying to
>>>>> measure events per unit of time.
>>>>
>>>> Ahh, that makes sense.
>>>>
>>>> Does SGX cause problem for these people?  It can create some of the same
>>>> collection gaps:
>>>>
>>>>           performance monitoring activities are suppressed when entering
>>>>           an opt-out (of performance monitoring) enclave.