KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	joro@8bytes.org, alex.williamson@redhat.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
	jean-philippe.brucker@arm.com, will.deacon@arm.com,
	robin.murphy@arm.com
Cc: marc.zyngier@arm.com, kevin.tian@intel.com,
	vincent.stehle@arm.com, ashok.raj@intel.com
Subject: [PATCH v8 21/29] iommu/smmuv3: Report non recoverable faults
Date: Sun, 26 May 2019 18:09:56 +0200
Message-ID: <20190526161004.25232-22-eric.auger@redhat.com> (raw)
In-Reply-To: <20190526161004.25232-1-eric.auger@redhat.com>

When a stage 1 related fault event is read from the event queue,
let's propagate it to potential external fault listeners, ie. users
who registered a fault handler.

Signed-off-by: Eric Auger <eric.auger@redhat.com>

---
v8 -> v9:
- adapt to the removal of IOMMU_FAULT_UNRECOV_PERM_VALID:
  only look at IOMMU_FAULT_UNRECOV_ADDR_VALID which comes with
  perm
- do not advertise IOMMU_FAULT_UNRECOV_PASID_VALID faults for
  translation faults
- trace errors if !master
- test nested before calling iommu_report_device_fault
- call the fault handler unconditionnally in non nested mode

v4 -> v5:
- s/IOMMU_FAULT_PERM_INST/IOMMU_FAULT_PERM_EXEC
---
 drivers/iommu/arm-smmu-v3.c | 182 +++++++++++++++++++++++++++++++++---
 1 file changed, 171 insertions(+), 11 deletions(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 3de07950e89e..4b56c76a0a40 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -169,6 +169,26 @@
 #define ARM_SMMU_PRIQ_IRQ_CFG1		0xd8
 #define ARM_SMMU_PRIQ_IRQ_CFG2		0xdc
 
+/* Events */
+#define ARM_SMMU_EVT_F_UUT		0x01
+#define ARM_SMMU_EVT_C_BAD_STREAMID	0x02
+#define ARM_SMMU_EVT_F_STE_FETCH	0x03
+#define ARM_SMMU_EVT_C_BAD_STE		0x04
+#define ARM_SMMU_EVT_F_BAD_ATS_TREQ	0x05
+#define ARM_SMMU_EVT_F_STREAM_DISABLED	0x06
+#define ARM_SMMU_EVT_F_TRANSL_FORBIDDEN	0x07
+#define ARM_SMMU_EVT_C_BAD_SUBSTREAMID	0x08
+#define ARM_SMMU_EVT_F_CD_FETCH		0x09
+#define ARM_SMMU_EVT_C_BAD_CD		0x0a
+#define ARM_SMMU_EVT_F_WALK_EABT	0x0b
+#define ARM_SMMU_EVT_F_TRANSLATION	0x10
+#define ARM_SMMU_EVT_F_ADDR_SIZE	0x11
+#define ARM_SMMU_EVT_F_ACCESS		0x12
+#define ARM_SMMU_EVT_F_PERMISSION	0x13
+#define ARM_SMMU_EVT_F_TLB_CONFLICT	0x20
+#define ARM_SMMU_EVT_F_CFG_CONFLICT	0x21
+#define ARM_SMMU_EVT_E_PAGE_REQUEST	0x24
+
 /* Common MSI config fields */
 #define MSI_CFG0_ADDR_MASK		GENMASK_ULL(51, 2)
 #define MSI_CFG2_SH			GENMASK(5, 4)
@@ -341,6 +361,15 @@
 #define EVTQ_MAX_SZ_SHIFT		7
 
 #define EVTQ_0_ID			GENMASK_ULL(7, 0)
+#define EVTQ_0_SSV			GENMASK_ULL(11, 11)
+#define EVTQ_0_SUBSTREAMID		GENMASK_ULL(31, 12)
+#define EVTQ_0_STREAMID			GENMASK_ULL(63, 32)
+#define EVTQ_1_PNU			GENMASK_ULL(33, 33)
+#define EVTQ_1_IND			GENMASK_ULL(34, 34)
+#define EVTQ_1_RNW			GENMASK_ULL(35, 35)
+#define EVTQ_1_S2			GENMASK_ULL(39, 39)
+#define EVTQ_1_CLASS			GENMASK_ULL(40, 41)
+#define EVTQ_3_FETCH_ADDR		GENMASK_ULL(51, 3)
 
 /* PRI queue */
 #define PRIQ_ENT_DWORDS			2
@@ -645,6 +674,57 @@ struct arm_smmu_domain {
 	spinlock_t			devices_lock;
 };
 
+/* fault propagation */
+struct arm_smmu_fault_propagation_data {
+	enum iommu_fault_reason reason;
+	bool s1_check;
+	u32 fields; /* IOMMU_FAULT_UNRECOV_*_VALID bits */
+};
+
+/*
+ * Describes how SMMU faults translate into generic IOMMU faults
+ * and if they need to be reported externally
+ */
+static const struct arm_smmu_fault_propagation_data fault_propagation[] = {
+[ARM_SMMU_EVT_F_UUT]			= { },
+[ARM_SMMU_EVT_C_BAD_STREAMID]		= { },
+[ARM_SMMU_EVT_F_STE_FETCH]		= { },
+[ARM_SMMU_EVT_C_BAD_STE]		= { },
+[ARM_SMMU_EVT_F_BAD_ATS_TREQ]		= { },
+[ARM_SMMU_EVT_F_STREAM_DISABLED]	= { },
+[ARM_SMMU_EVT_F_TRANSL_FORBIDDEN]	= { },
+[ARM_SMMU_EVT_C_BAD_SUBSTREAMID]	= {IOMMU_FAULT_REASON_PASID_INVALID,
+					   false,
+					   IOMMU_FAULT_UNRECOV_PASID_VALID
+					  },
+[ARM_SMMU_EVT_F_CD_FETCH]		= {IOMMU_FAULT_REASON_PASID_FETCH,
+					   false,
+					   IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_C_BAD_CD]			= {IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+					   false,
+					  },
+[ARM_SMMU_EVT_F_WALK_EABT]		= {IOMMU_FAULT_REASON_WALK_EABT, true,
+					   IOMMU_FAULT_UNRECOV_ADDR_VALID |
+					   IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_F_TRANSLATION]		= {IOMMU_FAULT_REASON_PTE_FETCH, true,
+					   IOMMU_FAULT_UNRECOV_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_F_ADDR_SIZE]		= {IOMMU_FAULT_REASON_OOR_ADDRESS, true,
+					   IOMMU_FAULT_UNRECOV_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_F_ACCESS]			= {IOMMU_FAULT_REASON_ACCESS, true,
+					   IOMMU_FAULT_UNRECOV_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_F_PERMISSION]		= {IOMMU_FAULT_REASON_PERMISSION, true,
+					   IOMMU_FAULT_UNRECOV_ADDR_VALID
+					  },
+[ARM_SMMU_EVT_F_TLB_CONFLICT]		= { },
+[ARM_SMMU_EVT_F_CFG_CONFLICT]		= { },
+[ARM_SMMU_EVT_E_PAGE_REQUEST]		= { },
+};
+
 struct arm_smmu_option_prop {
 	u32 opt;
 	const char *prop;
@@ -1322,7 +1402,6 @@ static int arm_smmu_init_l2_strtab(struct arm_smmu_device *smmu, u32 sid)
 	return 0;
 }
 
-__maybe_unused
 static struct arm_smmu_master *
 arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid)
 {
@@ -1348,24 +1427,105 @@ arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid)
 	return master;
 }
 
+/* Populates the record fields according to the input SMMU event */
+static bool arm_smmu_transcode_fault(u64 *evt, u8 type,
+				     struct iommu_fault_unrecoverable *record)
+{
+	const struct arm_smmu_fault_propagation_data *data;
+	u32 fields;
+
+	if (type >= ARRAY_SIZE(fault_propagation))
+		return false;
+
+	data = &fault_propagation[type];
+	if (!data->reason)
+		return false;
+
+	fields = data->fields;
+
+	if (data->s1_check & FIELD_GET(EVTQ_1_S2, evt[1]))
+		return false; /* S2 related fault, don't propagate */
+
+	if (fields & IOMMU_FAULT_UNRECOV_PASID_VALID)
+		record->pasid = FIELD_GET(EVTQ_0_SUBSTREAMID, evt[0]);
+	else {
+		/* all other transcoded errors have SSV */
+		if (FIELD_GET(EVTQ_0_SSV, evt[0])) {
+			record->pasid = FIELD_GET(EVTQ_0_SUBSTREAMID, evt[0]);
+			fields |= IOMMU_FAULT_UNRECOV_PASID_VALID;
+		}
+	}
+
+	if (fields & IOMMU_FAULT_UNRECOV_ADDR_VALID) {
+		if (FIELD_GET(EVTQ_1_RNW, evt[1]))
+			record->perm = IOMMU_FAULT_PERM_READ;
+		else
+			record->perm = IOMMU_FAULT_PERM_WRITE;
+		if (FIELD_GET(EVTQ_1_PNU, evt[1]))
+			record->perm |= IOMMU_FAULT_PERM_PRIV;
+		if (FIELD_GET(EVTQ_1_IND, evt[1]))
+			record->perm |= IOMMU_FAULT_PERM_EXEC;
+		record->addr = evt[2];
+	}
+
+	if (fields & IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID)
+		record->fetch_addr = FIELD_GET(EVTQ_3_FETCH_ADDR, evt[3]);
+
+	record->flags = fields;
+	record->reason = data->reason;
+	return true;
+}
+
+static void arm_smmu_report_event(struct arm_smmu_device *smmu, u64 *evt)
+{
+	u32 sid = FIELD_GET(EVTQ_0_STREAMID, evt[0]);
+	u8 type = FIELD_GET(EVTQ_0_ID, evt[0]);
+	struct arm_smmu_master *master;
+	struct iommu_fault_event event = {};
+	bool nested;
+	int i;
+
+	master = arm_smmu_find_master(smmu, sid);
+	if (!master || !master->domain)
+		goto out;
+
+	event.fault.type = IOMMU_FAULT_DMA_UNRECOV;
+
+	nested = (master->domain->stage == ARM_SMMU_DOMAIN_NESTED);
+
+	if (nested) {
+		if (arm_smmu_transcode_fault(evt, type, &event.fault.event)) {
+			/*
+			 * Only S1 related faults should be reported to the
+			 * guest and must not flood the host log.
+			 * Also a fault handler should have been registered
+			 * to guarantee the full nested functionality
+			 */
+			WARN_ON_ONCE(iommu_report_device_fault(master->dev,
+							       &event));
+			return;
+		}
+	} else {
+		iommu_report_device_fault(master->dev, &event);
+	}
+out:
+	dev_info(smmu->dev, "event 0x%02x received:\n", type);
+	for (i = 0; i < EVTQ_ENT_DWORDS; ++i) {
+		dev_info(smmu->dev, "\t0x%016llx\n",
+			 (unsigned long long)evt[i]);
+	}
+}
+
 /* IRQ and event handlers */
 static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)
 {
-	int i;
 	struct arm_smmu_device *smmu = dev;
 	struct arm_smmu_queue *q = &smmu->evtq.q;
 	u64 evt[EVTQ_ENT_DWORDS];
 
 	do {
-		while (!queue_remove_raw(q, evt)) {
-			u8 id = FIELD_GET(EVTQ_0_ID, evt[0]);
-
-			dev_info(smmu->dev, "event 0x%02x received:\n", id);
-			for (i = 0; i < ARRAY_SIZE(evt); ++i)
-				dev_info(smmu->dev, "\t0x%016llx\n",
-					 (unsigned long long)evt[i]);
-
-		}
+		while (!queue_remove_raw(q, evt))
+			arm_smmu_report_event(smmu, evt);
 
 		/*
 		 * Not much we can do on overflow, so scream and pretend we're
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-26 16:09 [PATCH v8 00/29] SMMUv3 Nested Stage Setup Eric Auger
2019-05-26 16:09 ` [PATCH v8 01/29] driver core: Add per device iommu param Eric Auger
2019-05-26 16:09 ` [PATCH v8 02/29] iommu: Introduce device fault data Eric Auger
2019-05-26 16:09 ` [PATCH v8 03/29] iommu: Introduce device fault report API Eric Auger
2019-05-26 16:09 ` [PATCH v8 04/29] iommu: Add recoverable fault reporting Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 15:48     ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 05/29] iommu: Add a timeout parameter for PRQ response Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-04 10:52     ` Jean-Philippe Brucker
2019-06-04 15:50       ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 06/29] trace/iommu: Add sva trace events Eric Auger
2019-05-26 16:09 ` [PATCH v8 07/29] iommu: Use device fault trace event Eric Auger
2019-05-26 16:09 ` [PATCH v8 08/29] iommu: Introduce attach/detach_pasid_table API Eric Auger
2019-05-26 16:09 ` [PATCH v8 09/29] iommu: Introduce cache_invalidate API Eric Auger
2019-05-26 16:09 ` [PATCH v8 10/29] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 11/29] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-05-26 16:09 ` [PATCH v8 12/29] iommu/smmuv3: Dynamically allocate s1_cfg and s2_cfg Eric Auger
2019-05-26 16:09 ` [PATCH v8 13/29] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-05-26 16:09 ` [PATCH v8 14/29] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-05-26 16:09 ` [PATCH v8 15/29] iommu/smmuv3: Introduce __arm_smmu_tlb_inv_asid/s1_range_nosync Eric Auger
2019-05-26 16:09 ` [PATCH v8 16/29] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-05-26 16:09 ` [PATCH v8 17/29] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-05-26 16:09 ` [PATCH v8 18/29] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2019-05-26 16:09 ` [PATCH v8 19/29] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2019-05-26 16:09 ` [PATCH v8 20/29] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` Eric Auger [this message]
2019-05-26 16:09 ` [PATCH v8 22/29] vfio: VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-05-26 16:09 ` [PATCH v8 23/29] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-06-14 12:38   ` Liu, Yi L
2019-06-14 13:17     ` Auger Eric
2019-05-26 16:09 ` [PATCH v8 24/29] vfio: VFIO_IOMMU_BIND/UNBIND_MSI Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-07  8:30     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 25/29] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-07  8:28     ` Auger Eric
2019-06-07 12:47       ` Jean-Philippe Brucker
2019-06-07 16:29       ` Alex Williamson
2019-05-26 16:10 ` [PATCH v8 26/29] vfio-pci: Register an iommu fault handler Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-06-05 22:45       ` Jacob Pan
2019-06-06 18:54         ` Jean-Philippe Brucker
2019-06-06 20:29           ` Jacob Pan
2019-06-07  7:02             ` Auger Eric
2019-06-07 10:28             ` Jean-Philippe Brucker
2019-06-07 17:43               ` Jacob Pan
2019-06-10 12:45                 ` Jean-Philippe Brucker
2019-06-10 21:31                   ` Jacob Pan
2019-06-11 13:14                     ` Jean-Philippe Brucker
2019-06-12 18:53                       ` Jacob Pan
2019-06-18 14:04                         ` Jean-Philippe Brucker
2019-06-19  0:19                           ` Jacob Pan
2019-06-19 11:44                             ` Jean-Philippe Brucker
2019-07-11 13:07                           ` Auger Eric
2019-06-07 12:48   ` Jean-Philippe Brucker
2019-06-07 14:18     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 27/29] vfio_pci: Allow to mmap the fault queue Eric Auger
2019-05-26 16:10 ` [PATCH v8 28/29] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 29/29] vfio: Document nested stage control Eric Auger

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190526161004.25232-22-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=vincent.stehle@arm.com \
    --cc=will.deacon@arm.com \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu kvmarm@archiver.kernel.org
	public-inbox-index kvmarm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox