kvmarm.lists.cs.columbia.edu archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	joro@8bytes.org, alex.williamson@redhat.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
	jean-philippe.brucker@arm.com, will.deacon@arm.com,
	robin.murphy@arm.com
Cc: marc.zyngier@arm.com, kevin.tian@intel.com,
	vincent.stehle@arm.com, ashok.raj@intel.com
Subject: [PATCH v8 08/29] iommu: Introduce attach/detach_pasid_table API
Date: Sun, 26 May 2019 18:09:43 +0200	[thread overview]
Message-ID: <20190526161004.25232-9-eric.auger@redhat.com> (raw)
In-Reply-To: <20190526161004.25232-1-eric.auger@redhat.com>

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

In virtualization use case, when a guest is assigned
a PCI host device, protected by a virtual IOMMU on the guest,
the physical IOMMU must be programmed to be consistent with
the guest mappings. If the physical IOMMU supports two
translation stages it makes sense to program guest mappings
onto the first stage/level (ARM/Intel terminology) while the host
owns the stage/level 2.

In that case, it is mandated to trap on guest configuration
settings and pass those to the physical iommu driver.

This patch adds a new API to the iommu subsystem that allows
to set/unset the pasid table information.

A generic iommu_pasid_table_config struct is introduced in
a new iommu.h uapi header. This is going to be used by the VFIO
user API.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
---
 drivers/iommu/iommu.c      | 19 ++++++++++++++
 include/linux/iommu.h      | 18 +++++++++++++
 include/uapi/linux/iommu.h | 52 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 89 insertions(+)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 166adb88b014..4496ccd40a8f 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -1619,6 +1619,25 @@ int iommu_page_response(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(iommu_page_response);
 
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	if (unlikely(!domain->ops->attach_pasid_table))
+		return -ENODEV;
+
+	return domain->ops->attach_pasid_table(domain, cfg);
+}
+EXPORT_SYMBOL_GPL(iommu_attach_pasid_table);
+
+void iommu_detach_pasid_table(struct iommu_domain *domain)
+{
+	if (unlikely(!domain->ops->detach_pasid_table))
+		return;
+
+	domain->ops->detach_pasid_table(domain);
+}
+EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
+
 static void __iommu_detach_device(struct iommu_domain *domain,
 				  struct device *dev)
 {
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 950347be47f9..d3edb107980e 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -264,6 +264,8 @@ struct page_response_msg {
  * @sva_unbind: Unbind process address space from device
  * @sva_get_pasid: Get PASID associated to a SVA handle
  * @page_response: handle page request response
+ * @attach_pasid_table: attach a pasid table
+ * @detach_pasid_table: detach the pasid table
  * @pgsize_bitmap: bitmap of all possible supported page sizes
  */
 struct iommu_ops {
@@ -323,6 +325,9 @@ struct iommu_ops {
 				      void *drvdata);
 	void (*sva_unbind)(struct iommu_sva *handle);
 	int (*sva_get_pasid)(struct iommu_sva *handle);
+	int (*attach_pasid_table)(struct iommu_domain *domain,
+				  struct iommu_pasid_table_config *cfg);
+	void (*detach_pasid_table)(struct iommu_domain *domain);
 
 	int (*page_response)(struct device *dev, struct page_response_msg *msg);
 
@@ -434,6 +439,9 @@ extern int iommu_attach_device(struct iommu_domain *domain,
 			       struct device *dev);
 extern void iommu_detach_device(struct iommu_domain *domain,
 				struct device *dev);
+extern int iommu_attach_pasid_table(struct iommu_domain *domain,
+				    struct iommu_pasid_table_config *cfg);
+extern void iommu_detach_pasid_table(struct iommu_domain *domain);
 extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
 extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
 extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
@@ -947,6 +955,13 @@ iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
 	return -ENODEV;
 }
 
+static inline
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	return -ENODEV;
+}
+
 static inline struct iommu_sva *
 iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void *drvdata)
 {
@@ -968,6 +983,9 @@ static inline int iommu_sva_get_pasid(struct iommu_sva *handle)
 	return IOMMU_PASID_INVALID;
 }
 
+static inline
+void iommu_detach_pasid_table(struct iommu_domain *domain) {}
+
 #endif /* CONFIG_IOMMU_API */
 
 #ifdef CONFIG_IOMMU_DEBUGFS
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index aaa3b6a23c8e..3976767f6324 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -115,4 +115,56 @@ struct iommu_fault {
 		struct iommu_fault_page_request prm;
 	};
 };
+
+/**
+ * struct iommu_pasid_smmuv3 - ARM SMMUv3 Stream Table Entry stage 1 related
+ *     information
+ * @version: API version of this structure
+ * @s1fmt: STE s1fmt (format of the CD table: single CD, linear table
+ *         or 2-level table)
+ * @s1dss: STE s1dss (specifies the behavior when @pasid_bits != 0
+ *         and no PASID is passed along with the incoming transaction)
+ * @padding: reserved for future use (should be zero)
+ *
+ * The PASID table is referred to as the Context Descriptor (CD) table on ARM
+ * SMMUv3. Please refer to the ARM SMMU 3.x spec (ARM IHI 0070A) for full
+ * details.
+ */
+struct iommu_pasid_smmuv3 {
+#define PASID_TABLE_SMMUV3_CFG_VERSION_1 1
+	__u32	version;
+	__u8	s1fmt;
+	__u8	s1dss;
+	__u8	padding[2];
+};
+
+/**
+ * struct iommu_pasid_table_config - PASID table data used to bind guest PASID
+ *     table to the host IOMMU
+ * @version: API version to prepare for future extensions
+ * @format: format of the PASID table
+ * @base_ptr: guest physical address of the PASID table
+ * @pasid_bits: number of PASID bits used in the PASID table
+ * @config: indicates whether the guest translation stage must
+ *          be translated, bypassed or aborted.
+ * @padding: reserved for future use (should be zero)
+ * @smmuv3: table information when @format is %IOMMU_PASID_FORMAT_SMMUV3
+ */
+struct iommu_pasid_table_config {
+#define PASID_TABLE_CFG_VERSION_1 1
+	__u32	version;
+#define IOMMU_PASID_FORMAT_SMMUV3	1
+	__u32	format;
+	__u64	base_ptr;
+	__u8	pasid_bits;
+#define IOMMU_PASID_CONFIG_TRANSLATE	1
+#define IOMMU_PASID_CONFIG_BYPASS	2
+#define IOMMU_PASID_CONFIG_ABORT	3
+	__u8	config;
+	__u8    padding[6];
+	union {
+		struct iommu_pasid_smmuv3 smmuv3;
+	};
+};
+
 #endif /* _UAPI_IOMMU_H */
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2019-05-26 16:11 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-26 16:09 [PATCH v8 00/29] SMMUv3 Nested Stage Setup Eric Auger
2019-05-26 16:09 ` [PATCH v8 01/29] driver core: Add per device iommu param Eric Auger
2019-05-26 16:09 ` [PATCH v8 02/29] iommu: Introduce device fault data Eric Auger
2019-05-26 16:09 ` [PATCH v8 03/29] iommu: Introduce device fault report API Eric Auger
2019-05-26 16:09 ` [PATCH v8 04/29] iommu: Add recoverable fault reporting Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 15:48     ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 05/29] iommu: Add a timeout parameter for PRQ response Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-04 10:52     ` Jean-Philippe Brucker
2019-06-04 15:50       ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 06/29] trace/iommu: Add sva trace events Eric Auger
2019-05-26 16:09 ` [PATCH v8 07/29] iommu: Use device fault trace event Eric Auger
2019-05-26 16:09 ` Eric Auger [this message]
2019-05-26 16:09 ` [PATCH v8 09/29] iommu: Introduce cache_invalidate API Eric Auger
2019-05-26 16:09 ` [PATCH v8 10/29] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 11/29] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-05-26 16:09 ` [PATCH v8 12/29] iommu/smmuv3: Dynamically allocate s1_cfg and s2_cfg Eric Auger
2019-05-26 16:09 ` [PATCH v8 13/29] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-05-26 16:09 ` [PATCH v8 14/29] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-05-26 16:09 ` [PATCH v8 15/29] iommu/smmuv3: Introduce __arm_smmu_tlb_inv_asid/s1_range_nosync Eric Auger
2019-05-26 16:09 ` [PATCH v8 16/29] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-05-26 16:09 ` [PATCH v8 17/29] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-05-26 16:09 ` [PATCH v8 18/29] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2019-05-26 16:09 ` [PATCH v8 19/29] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2019-05-26 16:09 ` [PATCH v8 20/29] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 21/29] iommu/smmuv3: Report non recoverable faults Eric Auger
2019-05-26 16:09 ` [PATCH v8 22/29] vfio: VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-05-26 16:09 ` [PATCH v8 23/29] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-06-14 12:38   ` Liu, Yi L
2019-06-14 13:17     ` Auger Eric
2019-05-26 16:09 ` [PATCH v8 24/29] vfio: VFIO_IOMMU_BIND/UNBIND_MSI Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-07  8:30     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 25/29] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-07  8:28     ` Auger Eric
2019-06-07 12:47       ` Jean-Philippe Brucker
2019-06-07 16:29       ` Alex Williamson
2019-05-26 16:10 ` [PATCH v8 26/29] vfio-pci: Register an iommu fault handler Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-06-05 22:45       ` Jacob Pan
2019-06-06 18:54         ` Jean-Philippe Brucker
2019-06-06 20:29           ` Jacob Pan
2019-06-07  7:02             ` Auger Eric
2019-06-07 10:28             ` Jean-Philippe Brucker
2019-06-07 17:43               ` Jacob Pan
2019-06-10 12:45                 ` Jean-Philippe Brucker
2019-06-10 21:31                   ` Jacob Pan
2019-06-11 13:14                     ` Jean-Philippe Brucker
2019-06-12 18:53                       ` Jacob Pan
2019-06-18 14:04                         ` Jean-Philippe Brucker
2019-06-19  0:19                           ` Jacob Pan
2019-06-19 11:44                             ` Jean-Philippe Brucker
2019-07-11 13:07                           ` Auger Eric
2019-06-07 12:48   ` Jean-Philippe Brucker
2019-06-07 14:18     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 27/29] vfio_pci: Allow to mmap the fault queue Eric Auger
2019-05-26 16:10 ` [PATCH v8 28/29] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 29/29] vfio: Document nested stage control Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190526161004.25232-9-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=vincent.stehle@arm.com \
    --cc=will.deacon@arm.com \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).