KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	joro@8bytes.org, alex.williamson@redhat.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
	jean-philippe.brucker@arm.com, will.deacon@arm.com,
	robin.murphy@arm.com
Cc: marc.zyngier@arm.com, kevin.tian@intel.com,
	vincent.stehle@arm.com, ashok.raj@intel.com
Subject: [PATCH v8 02/29] iommu: Introduce device fault data
Date: Sun, 26 May 2019 18:09:37 +0200
Message-ID: <20190526161004.25232-3-eric.auger@redhat.com> (raw)
In-Reply-To: <20190526161004.25232-1-eric.auger@redhat.com>

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.

The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.

We only care about non internal faults that are likely to be reported
to an external subsystem.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
 include/linux/iommu.h      |  44 ++++++++++++++
 include/uapi/linux/iommu.h | 118 +++++++++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 include/uapi/linux/iommu.h

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index a815cf6f6f47..7890a92e496a 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <uapi/linux/iommu.h>
 
 #define IOMMU_READ	(1 << 0)
 #define IOMMU_WRITE	(1 << 1)
@@ -49,6 +50,7 @@ struct device;
 struct iommu_domain;
 struct notifier_block;
 struct iommu_sva;
+struct iommu_fault_event;
 
 /* iommu fault flags */
 #define IOMMU_FAULT_READ	0x0
@@ -58,6 +60,7 @@ typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
 			struct device *, unsigned long, int, void *);
 typedef int (*iommu_mm_exit_handler_t)(struct device *dev, struct iommu_sva *,
 				       void *);
+typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *, void *);
 
 struct iommu_domain_geometry {
 	dma_addr_t aperture_start; /* First address that can be mapped    */
@@ -301,6 +304,46 @@ struct iommu_device {
 	struct device *dev;
 };
 
+/**
+ * struct iommu_fault_event - Generic fault event
+ *
+ * Can represent recoverable faults such as a page requests or
+ * unrecoverable faults such as DMA or IRQ remapping faults.
+ *
+ * @fault: fault descriptor
+ * @iommu_private: used by the IOMMU driver for storing fault-specific
+ *                 data. Users should not modify this field before
+ *                 sending the fault response.
+ */
+struct iommu_fault_event {
+	struct iommu_fault fault;
+	u64 iommu_private;
+};
+
+/**
+ * struct iommu_fault_param - per-device IOMMU fault data
+ * @dev_fault_handler: Callback function to handle IOMMU faults at device level
+ * @data: handler private data
+ *
+ */
+struct iommu_fault_param {
+	iommu_dev_fault_handler_t handler;
+	void *data;
+};
+
+/**
+ * struct iommu_param - collection of per-device IOMMU data
+ *
+ * @fault_param: IOMMU detected device fault reporting data
+ *
+ * TODO: migrate other per device data pointers under iommu_dev_data, e.g.
+ *	struct iommu_group	*iommu_group;
+ *	struct iommu_fwspec	*iommu_fwspec;
+ */
+struct iommu_param {
+	struct iommu_fault_param *fault_param;
+};
+
 int  iommu_device_register(struct iommu_device *iommu);
 void iommu_device_unregister(struct iommu_device *iommu);
 int  iommu_device_sysfs_add(struct iommu_device *iommu,
@@ -504,6 +547,7 @@ struct iommu_ops {};
 struct iommu_group {};
 struct iommu_fwspec {};
 struct iommu_device {};
+struct iommu_fault_param {};
 
 static inline bool iommu_present(struct bus_type *bus)
 {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
new file mode 100644
index 000000000000..aaa3b6a23c8e
--- /dev/null
+++ b/include/uapi/linux/iommu.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * IOMMU user API definitions
+ */
+
+#ifndef _UAPI_IOMMU_H
+#define _UAPI_IOMMU_H
+
+#include <linux/types.h>
+
+#define IOMMU_FAULT_PERM_READ	(1 << 0) /* read */
+#define IOMMU_FAULT_PERM_WRITE	(1 << 1) /* write */
+#define IOMMU_FAULT_PERM_EXEC	(1 << 2) /* exec */
+#define IOMMU_FAULT_PERM_PRIV	(1 << 3) /* privileged */
+
+/* Generic fault types, can be expanded IRQ remapping fault */
+enum iommu_fault_type {
+	IOMMU_FAULT_DMA_UNRECOV = 1,	/* unrecoverable fault */
+	IOMMU_FAULT_PAGE_REQ,		/* page request fault */
+};
+
+enum iommu_fault_reason {
+	IOMMU_FAULT_REASON_UNKNOWN = 0,
+
+	/* Could not access the PASID table (fetch caused external abort) */
+	IOMMU_FAULT_REASON_PASID_FETCH,
+
+	/* PASID entry is invalid or has configuration errors */
+	IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+
+	/*
+	 * PASID is out of range (e.g. exceeds the maximum PASID
+	 * supported by the IOMMU) or disabled.
+	 */
+	IOMMU_FAULT_REASON_PASID_INVALID,
+
+	/*
+	 * An external abort occurred fetching (or updating) a translation
+	 * table descriptor
+	 */
+	IOMMU_FAULT_REASON_WALK_EABT,
+
+	/*
+	 * Could not access the page table entry (Bad address),
+	 * actual translation fault
+	 */
+	IOMMU_FAULT_REASON_PTE_FETCH,
+
+	/* Protection flag check failed */
+	IOMMU_FAULT_REASON_PERMISSION,
+
+	/* access flag check failed */
+	IOMMU_FAULT_REASON_ACCESS,
+
+	/* Output address of a translation stage caused Address Size fault */
+	IOMMU_FAULT_REASON_OOR_ADDRESS,
+};
+
+/**
+ * struct iommu_fault_unrecoverable - Unrecoverable fault data
+ * @reason: reason of the fault, from &enum iommu_fault_reason
+ * @flags: parameters of this fault (IOMMU_FAULT_UNRECOV_* values)
+ * @pasid: Process Address Space ID
+ * @perm: Requested permission access using by the incoming transaction
+ *        (IOMMU_FAULT_PERM_* values)
+ * @addr: offending page address
+ * @fetch_addr: address that caused a fetch abort, if any
+ */
+struct iommu_fault_unrecoverable {
+	__u32	reason;
+#define IOMMU_FAULT_UNRECOV_PASID_VALID		(1 << 0)
+#define IOMMU_FAULT_UNRECOV_ADDR_VALID		(1 << 1)
+#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID	(1 << 2)
+	__u32	flags;
+	__u32	pasid;
+	__u32	perm;
+	__u64	addr;
+	__u64	fetch_addr;
+};
+
+/**
+ * struct iommu_fault_page_request - Page Request data
+ * @flags: encodes whether the corresponding fields are valid and whether this
+ *         is the last page in group (IOMMU_FAULT_PAGE_REQUEST_* values)
+ * @pasid: Process Address Space ID
+ * @grpid: Page Request Group Index
+ * @perm: requested page permissions (IOMMU_FAULT_PERM_* values)
+ * @addr: page address
+ * @private_data: device-specific private information
+ */
+struct iommu_fault_page_request {
+#define IOMMU_FAULT_PAGE_REQUEST_PASID_VALID	(1 << 0)
+#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE	(1 << 1)
+#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA	(1 << 2)
+	__u32	flags;
+	__u32	pasid;
+	__u32	grpid;
+	__u32	perm;
+	__u64	addr;
+	__u64	private_data[2];
+};
+
+/**
+ * struct iommu_fault - Generic fault data
+ * @type: fault type from &enum iommu_fault_type
+ * @padding: reserved for future use (should be zero)
+ * @event: Fault event, when @type is %IOMMU_FAULT_DMA_UNRECOV
+ * @prm: Page Request message, when @type is %IOMMU_FAULT_PAGE_REQ
+ */
+struct iommu_fault {
+	__u32	type;
+	__u32	padding;
+	union {
+		struct iommu_fault_unrecoverable event;
+		struct iommu_fault_page_request prm;
+	};
+};
+#endif /* _UAPI_IOMMU_H */
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply index

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-26 16:09 [PATCH v8 00/29] SMMUv3 Nested Stage Setup Eric Auger
2019-05-26 16:09 ` [PATCH v8 01/29] driver core: Add per device iommu param Eric Auger
2019-05-26 16:09 ` Eric Auger [this message]
2019-05-26 16:09 ` [PATCH v8 03/29] iommu: Introduce device fault report API Eric Auger
2019-05-26 16:09 ` [PATCH v8 04/29] iommu: Add recoverable fault reporting Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 15:48     ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 05/29] iommu: Add a timeout parameter for PRQ response Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-04 10:52     ` Jean-Philippe Brucker
2019-06-04 15:50       ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 06/29] trace/iommu: Add sva trace events Eric Auger
2019-05-26 16:09 ` [PATCH v8 07/29] iommu: Use device fault trace event Eric Auger
2019-05-26 16:09 ` [PATCH v8 08/29] iommu: Introduce attach/detach_pasid_table API Eric Auger
2019-05-26 16:09 ` [PATCH v8 09/29] iommu: Introduce cache_invalidate API Eric Auger
2019-05-26 16:09 ` [PATCH v8 10/29] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 11/29] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-05-26 16:09 ` [PATCH v8 12/29] iommu/smmuv3: Dynamically allocate s1_cfg and s2_cfg Eric Auger
2019-05-26 16:09 ` [PATCH v8 13/29] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-05-26 16:09 ` [PATCH v8 14/29] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-05-26 16:09 ` [PATCH v8 15/29] iommu/smmuv3: Introduce __arm_smmu_tlb_inv_asid/s1_range_nosync Eric Auger
2019-05-26 16:09 ` [PATCH v8 16/29] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-05-26 16:09 ` [PATCH v8 17/29] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-05-26 16:09 ` [PATCH v8 18/29] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2019-05-26 16:09 ` [PATCH v8 19/29] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2019-05-26 16:09 ` [PATCH v8 20/29] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 21/29] iommu/smmuv3: Report non recoverable faults Eric Auger
2019-05-26 16:09 ` [PATCH v8 22/29] vfio: VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-05-26 16:09 ` [PATCH v8 23/29] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-06-14 12:38   ` Liu, Yi L
2019-06-14 13:17     ` Auger Eric
2019-05-26 16:09 ` [PATCH v8 24/29] vfio: VFIO_IOMMU_BIND/UNBIND_MSI Eric Auger
2019-06-03 22:32   ` Alex Williamson
2019-06-07  8:30     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 25/29] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-07  8:28     ` Auger Eric
2019-06-07 12:47       ` Jean-Philippe Brucker
2019-06-07 16:29       ` Alex Williamson
2019-05-26 16:10 ` [PATCH v8 26/29] vfio-pci: Register an iommu fault handler Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-06-05 22:45       ` Jacob Pan
2019-06-06 18:54         ` Jean-Philippe Brucker
2019-06-06 20:29           ` Jacob Pan
2019-06-07  7:02             ` Auger Eric
2019-06-07 10:28             ` Jean-Philippe Brucker
2019-06-07 17:43               ` Jacob Pan
2019-06-10 12:45                 ` Jean-Philippe Brucker
2019-06-10 21:31                   ` Jacob Pan
2019-06-11 13:14                     ` Jean-Philippe Brucker
2019-06-12 18:53                       ` Jacob Pan
2019-06-18 14:04                         ` Jean-Philippe Brucker
2019-06-19  0:19                           ` Jacob Pan
2019-06-19 11:44                             ` Jean-Philippe Brucker
2019-07-11 13:07                           ` Auger Eric
2019-06-07 12:48   ` Jean-Philippe Brucker
2019-06-07 14:18     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 27/29] vfio_pci: Allow to mmap the fault queue Eric Auger
2019-05-26 16:10 ` [PATCH v8 28/29] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-06-03 22:31   ` Alex Williamson
2019-06-04 16:11     ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 29/29] vfio: Document nested stage control Eric Auger

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190526161004.25232-3-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=vincent.stehle@arm.com \
    --cc=will.deacon@arm.com \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu kvmarm@archiver.kernel.org
	public-inbox-index kvmarm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox