From: Jerome Brunet <jbrunet@baylibre.com>
To: Dmitry Rokosov <ddrokosov@sberdevices.ru>,
neil.armstrong@linaro.org, mturquette@baylibre.com,
sboyd@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, khilman@baylibre.com,
martin.blumenstingl@googlemail.com
Cc: jian.hu@amlogic.com, kernel@sberdevices.ru, rockosov@gmail.com,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v11 3/5] dt-bindings: clock: meson: add A1 PLL and Peripherals clkcs bindings
Date: Mon, 27 Mar 2023 11:51:21 +0200 [thread overview]
Message-ID: <1jmt3yo5r0.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20230321193014.26349-4-ddrokosov@sberdevices.ru>
On Tue 21 Mar 2023 at 22:30, Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
> Add the documentation for Amlogic A1 PLL and Amlogic A1 Peripherals
> clock drivers.
> Introduce Amlogic A1 PLL and Amlogic A1 Peripherals device tree
> bindings and include them to MAINTAINERS.
>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> ---
> .../bindings/clock/amlogic,a1-clkc.yaml | 73 +++++++++++
> .../bindings/clock/amlogic,a1-pll-clkc.yaml | 59 +++++++++
> MAINTAINERS | 1 +
> include/dt-bindings/clock/amlogic,a1-clkc.h | 113 ++++++++++++++++++
> .../dt-bindings/clock/amlogic,a1-pll-clkc.h | 21 ++++
> 5 files changed, 267 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
There is two drivers (and 2 independent patches). There should be 2
bindings patches as well.
> create mode 100644 include/dt-bindings/clock/amlogic,a1-clkc.h
> create mode 100644 include/dt-bindings/clock/amlogic,a1-pll-clkc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
> new file mode 100644
> index 000000000000..cb6d8f4eb959
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson A/C serials Peripheral Clock Control Unit
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> + - Jerome Brunet <jbrunet@baylibre.com>
> + - Jian Hu <jian.hu@jian.hu.com>
> + - Dmitry Rokosov <ddrokosov@sberdevices.ru>
> +
> +properties:
> + compatible:
> + const: amlogic,a1-clkc
> +
> + '#clock-cells':
> + const: 1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: input fixed pll div2
> + - description: input fixed pll div3
> + - description: input fixed pll div5
> + - description: input fixed pll div7
> + - description: input hifi pll
> + - description: input oscillator (usually at 24MHz)
> +
> + clock-names:
> + items:
> + - const: fclk_div2
> + - const: fclk_div3
> + - const: fclk_div5
> + - const: fclk_div7
> + - const: hifi_pll
> + - const: xtal
> +
> +required:
> + - compatible
> + - '#clock-cells'
> + - reg
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
> + apb {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clock-controller@800 {
> + compatible = "amlogic,a1-clkc";
> + reg = <0 0x800 0 0x104>;
> + #clock-cells = <1>;
> + clocks = <&clkc_pll CLKID_FCLK_DIV2>,
> + <&clkc_pll CLKID_FCLK_DIV3>,
> + <&clkc_pll CLKID_FCLK_DIV5>,
> + <&clkc_pll CLKID_FCLK_DIV7>,
> + <&clkc_pll CLKID_HIFI_PLL>,
> + <&xtal>;
> + clock-names = "fclk_div2", "fclk_div3",
> + "fclk_div5", "fclk_div7",
> + "hifi_pll", "xtal";
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> new file mode 100644
> index 000000000000..77a13b1f9d5a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson A/C serials PLL Clock Control Unit
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> + - Jerome Brunet <jbrunet@baylibre.com>
> + - Jian Hu <jian.hu@jian.hu.com>
> + - Dmitry Rokosov <ddrokosov@sberdevices.ru>
> +
> +properties:
> + compatible:
> + const: amlogic,a1-pll-clkc
> +
> + '#clock-cells':
> + const: 1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: input fixpll_in
> + - description: input hifipll_in
> +
> + clock-names:
> + items:
> + - const: fixpll_in
> + - const: hifipll_in
> +
> +required:
> + - compatible
> + - '#clock-cells'
> + - reg
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/amlogic,a1-clkc.h>
> + apb {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clock-controller@7c80 {
> + compatible = "amlogic,a1-pll-clkc";
> + reg = <0 0x7c80 0 0x18c>;
> + #clock-cells = <1>;
> + clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
> + <&clkc_periphs CLKID_HIFIPLL_IN>;
> + clock-names = "fixpll_in", "hifipll_in";
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 39ff1a717625..8438bc9bd636 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1895,6 +1895,7 @@ L: linux-amlogic@lists.infradead.org
> S: Maintained
> F: Documentation/devicetree/bindings/clock/amlogic*
> F: drivers/clk/meson/
> +F: include/dt-bindings/clock/a1*
> F: include/dt-bindings/clock/gxbb*
> F: include/dt-bindings/clock/meson*
>
> diff --git a/include/dt-bindings/clock/amlogic,a1-clkc.h b/include/dt-bindings/clock/amlogic,a1-clkc.h
> new file mode 100644
> index 000000000000..95131779982c
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,a1-clkc.h
> @@ -0,0 +1,113 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + * Author: Jian Hu <jian.hu@amlogic.com>
> + *
> + * Copyright (c) 2023, SberDevices. All Rights Reserved.
> + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> + */
> +
> +#ifndef __A1_CLKC_H
> +#define __A1_CLKC_H
> +
> +#define CLKID_FIXPLL_IN 0
> +#define CLKID_USB_PHY_IN 1
> +#define CLKID_USB_CTRL_IN 2
> +#define CLKID_HIFIPLL_IN 3
> +#define CLKID_SYSPLL_IN 4
> +#define CLKID_DDS_IN 5
> +#define CLKID_SYS 6
> +#define CLKID_CLKTREE 7
> +#define CLKID_RESET_CTRL 8
> +#define CLKID_ANALOG_CTRL 9
> +#define CLKID_PWR_CTRL 10
> +#define CLKID_PAD_CTRL 11
> +#define CLKID_SYS_CTRL 12
> +#define CLKID_TEMP_SENSOR 13
> +#define CLKID_AM2AXI_DIV 14
> +#define CLKID_SPICC_B 15
> +#define CLKID_SPICC_A 16
> +#define CLKID_MSR 17
> +#define CLKID_AUDIO 18
> +#define CLKID_JTAG_CTRL 19
> +#define CLKID_SARADC_EN 20
> +#define CLKID_PWM_EF 21
> +#define CLKID_PWM_CD 22
> +#define CLKID_PWM_AB 23
> +#define CLKID_CEC 24
> +#define CLKID_I2C_S 25
> +#define CLKID_IR_CTRL 26
> +#define CLKID_I2C_M_D 27
> +#define CLKID_I2C_M_C 28
> +#define CLKID_I2C_M_B 29
> +#define CLKID_I2C_M_A 30
> +#define CLKID_ACODEC 31
> +#define CLKID_OTP 32
> +#define CLKID_SD_EMMC_A 33
> +#define CLKID_USB_PHY 34
> +#define CLKID_USB_CTRL 35
> +#define CLKID_SYS_DSPB 36
> +#define CLKID_SYS_DSPA 37
> +#define CLKID_DMA 38
> +#define CLKID_IRQ_CTRL 39
> +#define CLKID_NIC 40
> +#define CLKID_GIC 41
> +#define CLKID_UART_C 42
> +#define CLKID_UART_B 43
> +#define CLKID_UART_A 44
> +#define CLKID_SYS_PSRAM 45
> +#define CLKID_RSA 46
> +#define CLKID_CORESIGHT 47
> +#define CLKID_AM2AXI_VAD 48
> +#define CLKID_AUDIO_VAD 49
> +#define CLKID_AXI_DMC 50
> +#define CLKID_AXI_PSRAM 51
> +#define CLKID_RAMB 52
> +#define CLKID_RAMA 53
> +#define CLKID_AXI_SPIFC 54
> +#define CLKID_AXI_NIC 55
> +#define CLKID_AXI_DMA 56
> +#define CLKID_CPU_CTRL 57
> +#define CLKID_ROM 58
> +#define CLKID_PROC_I2C 59
> +#define CLKID_DSPA_EN 60
> +#define CLKID_DSPA_EN_NIC 61
> +#define CLKID_DSPB_EN 62
> +#define CLKID_DSPB_EN_NIC 63
> +#define CLKID_RTC 64
> +#define CLKID_CECA_32K 65
> +#define CLKID_CECB_32K 66
> +#define CLKID_24M 67
> +#define CLKID_12M 68
> +#define CLKID_FCLK_DIV2_DIVN 69
> +#define CLKID_GEN 70
> +#define CLKID_SARADC 71
> +#define CLKID_PWM_A 72
> +#define CLKID_PWM_B 73
> +#define CLKID_PWM_C 74
> +#define CLKID_PWM_D 75
> +#define CLKID_PWM_E 76
> +#define CLKID_PWM_F 77
> +#define CLKID_SPICC 78
> +#define CLKID_TS 79
> +#define CLKID_SPIFC 80
> +#define CLKID_USB_BUS 81
> +#define CLKID_SD_EMMC 82
> +#define CLKID_PSRAM 83
> +#define CLKID_DMC 84
> +#define CLKID_GEN_SEL 85
> +#define CLKID_PWM_A_SEL 86
> +#define CLKID_PWM_B_SEL 87
> +#define CLKID_PWM_C_SEL 88
> +#define CLKID_PWM_D_SEL 89
> +#define CLKID_PWM_E_SEL 90
> +#define CLKID_PWM_F_SEL 91
> +#define CLKID_DSPA_A_SEL 92
> +#define CLKID_DSPA_B_SEL 93
> +#define CLKID_DSPB_A_SEL 94
> +#define CLKID_DSPB_B_SEL 95
> +#define CLKID_CECA_32K_SEL 96
> +#define CLKID_CECB_32K_SEL 97
> +#define NR_CLKS 98
> +
> +#endif /* __A1_CLKC_H */
> diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> new file mode 100644
> index 000000000000..740fe8c4db5d
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + * Author: Jian Hu <jian.hu@amlogic.com>
> + *
> + * Copyright (c) 2023, SberDevices. All Rights Reserved.
> + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> + */
> +
> +#ifndef __A1_PLL_CLKC_H
> +#define __A1_PLL_CLKC_H
> +
> +#define CLKID_FIXED_PLL 0
> +#define CLKID_FCLK_DIV2 1
> +#define CLKID_FCLK_DIV3 2
> +#define CLKID_FCLK_DIV5 3
> +#define CLKID_FCLK_DIV7 4
> +#define CLKID_HIFI_PLL 5
> +#define NR_PLL_CLKS 6
> +
> +#endif /* __A1_PLL_CLKC_H */
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-03-27 10:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-21 19:30 [PATCH v11 0/5] add Amlogic A1 clock controller drivers Dmitry Rokosov
2023-03-21 19:30 ` [PATCH v11 1/5] clk: meson: make pll rst bit as optional Dmitry Rokosov
2023-03-21 19:30 ` [PATCH v11 2/5] clk: meson: introduce new pll power-on sequence for A1 SoC family Dmitry Rokosov
2023-03-21 19:30 ` [PATCH v11 3/5] dt-bindings: clock: meson: add A1 PLL and Peripherals clkcs bindings Dmitry Rokosov
2023-03-27 9:51 ` Jerome Brunet [this message]
2023-03-27 10:51 ` Dmitry Rokosov
2023-03-27 11:39 ` Jerome Brunet
2023-03-27 12:03 ` neil.armstrong
2023-03-27 13:19 ` Dmitry Rokosov
2023-03-27 13:22 ` Dmitry Rokosov
2023-03-27 13:55 ` neil.armstrong
2023-03-27 14:02 ` Dmitry Rokosov
2023-03-27 13:41 ` Krzysztof Kozlowski
2023-03-27 13:46 ` Dmitry Rokosov
2023-03-27 13:59 ` Jerome Brunet
2023-03-27 15:28 ` Rob Herring
2023-03-21 19:30 ` [PATCH v11 4/5] clk: meson: a1: add Amlogic A1 PLL clock controller driver Dmitry Rokosov
2023-03-21 19:30 ` [PATCH v11 5/5] clk: meson: a1: add Amlogic A1 Peripherals " Dmitry Rokosov
2023-03-27 9:58 ` Jerome Brunet
2023-03-27 13:27 ` Dmitry Rokosov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1jmt3yo5r0.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=ddrokosov@sberdevices.ru \
--cc=devicetree@vger.kernel.org \
--cc=jian.hu@amlogic.com \
--cc=kernel@sberdevices.ru \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=rockosov@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).