Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] arm64: dts: meson: add support for MeCool KII-Pro/KIII-Pro
@ 2021-03-29 15:47 Christian Hewitt
  2021-03-29 15:47 ` [PATCH 1/3] dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings Christian Hewitt
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Christian Hewitt @ 2021-03-29 15:47 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt, Drazen Spio

This series adds support for the MeCool (Videostrong) KII Pro (GXL)
and KIII Pro (GXM) Android STB devices. These are quite popular due
to the embedded multi-standard tuner card (which is sadly not-yet
supported in the kernel). Both devices closely follow the Amlogic
reference designs with keys/buttons/LED details taken from known-
working vendor kernel device-trees.

Testing was made by Drazen Spio via the LibreELEC forums [0] as I
don't own either device. Since dts files were added to LibreELEC
nightly test images I've seen the number of active installs grow
without reported issues.

[0] https://forum.libreelec.tv/thread/23590-nightbuild-on-mecool-kiii-pro/

Christian Hewitt (3):
  dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
  arm64: dts: meson: add initial device-tree for MeCool KII Pro
  arm64: dts: meson: add initial device-tree for MeCool KIII Pro

 .../devicetree/bindings/arm/amlogic.yaml      |   2 +
 arch/arm64/boot/dts/amlogic/Makefile          |   2 +
 .../meson-gxl-s905d-mecool-kii-pro.dts        |  86 +++++++++++++
 .../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++
 4 files changed, 203 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-29 15:47 [PATCH 0/3] arm64: dts: meson: add support for MeCool KII-Pro/KIII-Pro Christian Hewitt
2021-03-29 15:47 ` [PATCH 1/3] dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings Christian Hewitt
2021-03-30 22:20   ` Rob Herring
2021-03-29 15:47 ` [PATCH 2/3] arm64: dts: meson: add initial device-tree for MeCool KII Pro Christian Hewitt
2021-03-30 15:25   ` Neil Armstrong
2021-03-29 15:47 ` [PATCH 3/3] arm64: dts: meson: add initial device-tree for MeCool KIII Pro Christian Hewitt
2021-03-30 15:25   ` Neil Armstrong
2021-03-31 21:43 ` [PATCH 0/3] arm64: dts: meson: add support for MeCool KII-Pro/KIII-Pro Kevin Hilman
2021-04-07 16:17 ` Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git