* [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding
@ 2023-03-24 22:51 Heiner Kallweit
2023-03-25 11:18 ` Krzysztof Kozlowski
0 siblings, 1 reply; 5+ messages in thread
From: Heiner Kallweit @ 2023-03-24 22:51 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-gpio
Convert Amlogic Meson pin controller binding to yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- consider that more than one compatible can be set
- remove bus part from example
v3:
- remove minItem/maxItem properties for compatible
v4:
- split patch to be able to deal with the different reg/reg-names
v5:
- remove compatible definition from common yaml
- move pincfg-node and pinmux-node definition to meson-gpio object definition
v6:
- add meson-pins definition
- change usage of unevaluatedProperties
v7:
- add unevaluatedProperties to meson-gpio references under patternProperties
---
.../pinctrl/amlogic,meson-pinctrl-a1.yaml | 67 +++++++++++++
.../pinctrl/amlogic,meson-pinctrl-common.yaml | 57 +++++++++++
.../amlogic,meson-pinctrl-g12a-aobus.yaml | 68 ++++++++++++++
.../amlogic,meson-pinctrl-g12a-periphs.yaml | 72 ++++++++++++++
.../pinctrl/amlogic,meson8-pinctrl-aobus.yaml | 76 +++++++++++++++
.../pinctrl/amlogic,meson8-pinctrl-cbus.yaml | 78 +++++++++++++++
.../bindings/pinctrl/meson,pinctrl.txt | 94 -------------------
7 files changed, 418 insertions(+), 94 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
new file mode 100644
index 000000000..1a8f2d248
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson A1 pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-a1-periphs-pinctrl
+ - amlogic,meson-s4-periphs-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: mux
+ - const: gpio
+
+ unevaluatedProperties: false
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ periphs_pinctrl: pinctrl {
+ compatible = "amlogic,meson-a1-periphs-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@400 {
+ reg = <0x0400 0x003c>,
+ <0x0480 0x0118>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 62>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
new file mode 100644
index 000000000..a7b29ef0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ ranges: true
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+required:
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
+
+$defs:
+ meson-gpio:
+ type: object
+
+ properties:
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+ meson-pins:
+ type: object
+ additionalProperties:
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
new file mode 100644
index 000000000..6fd3d88f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 AOBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-aobus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ properties:
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: mux
+ - const: ds
+ - const: gpio
+
+ unevaluatedProperties: false
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ ao_pinctrl: pinctrl {
+ compatible = "amlogic,meson-g12a-aobus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@14 {
+ reg = <0x14 0x8>,
+ <0x1c 0x8>,
+ <0x24 0x14>;
+ reg-names = "mux", "ds", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ao_pinctrl 0 0 15>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
new file mode 100644
index 000000000..b68d1bb06
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 PERIPHS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-periphs-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ properties:
+ reg:
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: pull
+ - const: pull-enable
+ - const: mux
+ - const: ds
+
+ unevaluatedProperties: false
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ periphs_pinctrl: pinctrl {
+ compatible = "amlogic,meson-g12a-periphs-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@40 {
+ reg = <0x40 0x4c>,
+ <0xe8 0x18>,
+ <0x120 0x18>,
+ <0x2c0 0x40>,
+ <0x340 0x1c>;
+ reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 86>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
new file mode 100644
index 000000000..f529ecf8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 AOBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,meson8-aobus-pinctrl
+ - amlogic,meson8b-aobus-pinctrl
+ - amlogic,meson-gxbb-aobus-pinctrl
+ - amlogic,meson-gxl-aobus-pinctrl
+ - amlogic,meson-axg-aobus-pinctrl
+ - items:
+ - const: amlogic,meson8m2-aobus-pinctrl
+ - const: amlogic,meson8-aobus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ properties:
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: mux
+ - const: pull
+ - const: gpio
+
+ unevaluatedProperties: false
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ pinctrl_aobus: pinctrl {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 16>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
new file mode 100644
index 000000000..c12f9ec58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 CBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,meson8-cbus-pinctrl
+ - amlogic,meson8b-cbus-pinctrl
+ - amlogic,meson-gxbb-periphs-pinctrl
+ - amlogic,meson-gxl-periphs-pinctrl
+ - amlogic,meson-axg-periphs-pinctrl
+ - items:
+ - const: amlogic,meson8m2-cbus-pinctrl
+ - const: amlogic,meson8-cbus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ properties:
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: mux
+ - const: pull
+ - const: pull-enable
+ - const: gpio
+
+ unevaluatedProperties: false
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ pinctrl_cbus: pinctrl {
+ compatible = "amlogic,meson8-cbus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 120>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
deleted file mode 100644
index 8146193bd..000000000
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-== Amlogic Meson pinmux controller ==
-
-Required properties for the root node:
- - compatible: one of "amlogic,meson8-cbus-pinctrl"
- "amlogic,meson8b-cbus-pinctrl"
- "amlogic,meson8m2-cbus-pinctrl"
- "amlogic,meson8-aobus-pinctrl"
- "amlogic,meson8b-aobus-pinctrl"
- "amlogic,meson8m2-aobus-pinctrl"
- "amlogic,meson-gxbb-periphs-pinctrl"
- "amlogic,meson-gxbb-aobus-pinctrl"
- "amlogic,meson-gxl-periphs-pinctrl"
- "amlogic,meson-gxl-aobus-pinctrl"
- "amlogic,meson-axg-periphs-pinctrl"
- "amlogic,meson-axg-aobus-pinctrl"
- "amlogic,meson-g12a-periphs-pinctrl"
- "amlogic,meson-g12a-aobus-pinctrl"
- "amlogic,meson-a1-periphs-pinctrl"
- "amlogic,meson-s4-periphs-pinctrl"
- - reg: address and size of registers controlling irq functionality
-
-=== GPIO sub-nodes ===
-
-The GPIO bank for the controller is represented as a sub-node and it acts as a
-GPIO controller.
-
-Required properties for sub-nodes are:
- - reg: should contain a list of address and size, one tuple for each entry
- in reg-names.
- - reg-names: an array of strings describing the "reg" entries.
- Must contain "mux" and "gpio".
- May contain "pull", "pull-enable" and "ds" when appropriate.
- - gpio-controller: identifies the node as a gpio controller
- - #gpio-cells: must be 2
-
-=== Other sub-nodes ===
-
-Child nodes without the "gpio-controller" represent some desired
-configuration for a pin or a group. Those nodes can be pinmux nodes or
-configuration nodes.
-
-Required properties for pinmux nodes are:
- - groups: a list of pinmux groups. The list of all available groups
- depends on the SoC and can be found in driver sources.
- - function: the name of a function to activate for the specified set
- of groups. The list of all available functions depends on the SoC
- and can be found in driver sources.
-
-Required properties for configuration nodes:
- - pins: a list of pin names
-
-Configuration nodes support the following generic properties, as
-described in file pinctrl-bindings.txt:
- - "bias-disable"
- - "bias-pull-up"
- - "bias-pull-down"
- - "output-enable"
- - "output-disable"
- - "output-low"
- - "output-high"
-
-Optional properties :
- - drive-strength-microamp: Drive strength for the specified pins in uA.
- This property is only valid for G12A and newer.
-
-=== Example ===
-
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-cbus-pinctrl";
- reg = <0xc1109880 0x10>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio: banks@c11080b0 {
- reg = <0xc11080b0 0x28>,
- <0xc11080e8 0x18>,
- <0xc1108120 0x18>,
- <0xc1108030 0x30>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- nand {
- mux {
- groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
- "nand_io_rb0", "nand_ale", "nand_cle",
- "nand_wen_clk", "nand_ren_clk", "nand_dqs",
- "nand_ce2", "nand_ce3";
- function = "nand";
- };
- };
- };
--
2.40.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding
2023-03-24 22:51 [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
@ 2023-03-25 11:18 ` Krzysztof Kozlowski
2023-03-25 11:41 ` Heiner Kallweit
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2023-03-25 11:18 UTC (permalink / raw)
To: Heiner Kallweit, Rob Herring, Krzysztof Kozlowski,
Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-gpio
On 24/03/2023 23:51, Heiner Kallweit wrote:
> Convert Amlogic Meson pin controller binding to yaml.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - consider that more than one compatible can be set
> - remove bus part from example
> v3:
> - remove minItem/maxItem properties for compatible
> v4:
> - split patch to be able to deal with the different reg/reg-names
> v5:
> - remove compatible definition from common yaml
> - move pincfg-node and pinmux-node definition to meson-gpio object definition
> v6:
> - add meson-pins definition
> - change usage of unevaluatedProperties
> v7:
> - add unevaluatedProperties to meson-gpio references under patternProperties
> ---
> .../pinctrl/amlogic,meson-pinctrl-a1.yaml | 67 +++++++++++++
> .../pinctrl/amlogic,meson-pinctrl-common.yaml | 57 +++++++++++
> .../amlogic,meson-pinctrl-g12a-aobus.yaml | 68 ++++++++++++++
> .../amlogic,meson-pinctrl-g12a-periphs.yaml | 72 ++++++++++++++
> .../pinctrl/amlogic,meson8-pinctrl-aobus.yaml | 76 +++++++++++++++
> .../pinctrl/amlogic,meson8-pinctrl-cbus.yaml | 78 +++++++++++++++
> .../bindings/pinctrl/meson,pinctrl.txt | 94 -------------------
> 7 files changed, 418 insertions(+), 94 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
> new file mode 100644
> index 000000000..1a8f2d248
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson A1 pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: amlogic,meson-pinctrl-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-a1-periphs-pinctrl
> + - amlogic,meson-s4-periphs-pinctrl
> +
> +required:
> + - compatible
> +
> +patternProperties:
> + "^bank@[0-9a-z]+$":
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
> +
> + properties:
> + reg:
> + maxItems: 2
> +
> + reg-names:
> + items:
> + - const: mux
> + - const: gpio
> +
> + unevaluatedProperties: false
> +
> +unevaluatedProperties:
> + type: object
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
> +
> +examples:
> + - |
> + periphs_pinctrl: pinctrl {
> + compatible = "amlogic,meson-a1-periphs-pinctrl";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + bank@400 {
> + reg = <0x0400 0x003c>,
> + <0x0480 0x0118>;
> + reg-names = "mux", "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&periphs_pinctrl 0 0 62>;
> + };
> +
> + cec_ao_a_h_pins: cec_ao_a_h {
> + mux {
> + groups = "cec_ao_a_h";
> + function = "cec_ao_a_h";
> + bias-disable;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> new file mode 100644
> index 000000000..a7b29ef0b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: pinctrl.yaml#
> +
> +properties:
> + ranges: true
> +
> + "#address-cells":
> + enum: [1, 2]
> +
> + "#size-cells":
> + enum: [1, 2]
> +
> +required:
> + - ranges
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: true
> +
> +$defs:
> + meson-gpio:
> + type: object
> +
> + properties:
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + required:
> + - reg
> + - reg-names
> + - gpio-controller
> + - "#gpio-cells"
> + - gpio-ranges
> +
> + meson-pins:
> + type: object
> + additionalProperties:
> + type: object
> + allOf:
> + - $ref: pincfg-node.yaml#
> + - $ref: pinmux-node.yaml#
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
> new file mode 100644
> index 000000000..6fd3d88f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson G12 AOBUS pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: amlogic,meson-pinctrl-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-g12a-aobus-pinctrl
> +
> +required:
> + - compatible
> +
> +patternProperties:
> + "^bank@[0-9a-z]+$":
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
> +
> + properties:
> + reg:
> + maxItems: 3
> +
> + reg-names:
> + items:
> + - const: mux
> + - const: ds
> + - const: gpio
> +
> + unevaluatedProperties: false
> +
> +unevaluatedProperties:
> + type: object
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
> +
> +examples:
> + - |
> + ao_pinctrl: pinctrl {
> + compatible = "amlogic,meson-g12a-aobus-pinctrl";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + bank@14 {
> + reg = <0x14 0x8>,
> + <0x1c 0x8>,
> + <0x24 0x14>;
> + reg-names = "mux", "ds", "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&ao_pinctrl 0 0 15>;
> + };
> +
> + cec_ao_a_h_pins: cec_ao_a_h {
> + mux {
> + groups = "cec_ao_a_h";
> + function = "cec_ao_a_h";
> + bias-disable;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
> new file mode 100644
> index 000000000..b68d1bb06
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson G12 PERIPHS pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: amlogic,meson-pinctrl-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-g12a-periphs-pinctrl
> +
> +required:
> + - compatible
> +
> +patternProperties:
> + "^bank@[0-9a-z]+$":
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
> +
> + properties:
> + reg:
> + maxItems: 5
> +
> + reg-names:
> + items:
> + - const: gpio
> + - const: pull
> + - const: pull-enable
> + - const: mux
> + - const: ds
> +
> + unevaluatedProperties: false
> +
> +unevaluatedProperties:
> + type: object
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
> +
> +examples:
> + - |
> + periphs_pinctrl: pinctrl {
> + compatible = "amlogic,meson-g12a-periphs-pinctrl";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + bank@40 {
> + reg = <0x40 0x4c>,
> + <0xe8 0x18>,
> + <0x120 0x18>,
> + <0x2c0 0x40>,
> + <0x340 0x1c>;
> + reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&periphs_pinctrl 0 0 86>;
> + };
> +
> + cec_ao_a_h_pins: cec_ao_a_h {
> + mux {
> + groups = "cec_ao_a_h";
> + function = "cec_ao_a_h";
> + bias-disable;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
> new file mode 100644
> index 000000000..f529ecf8e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson8 AOBUS pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: amlogic,meson-pinctrl-common.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - amlogic,meson8-aobus-pinctrl
> + - amlogic,meson8b-aobus-pinctrl
> + - amlogic,meson-gxbb-aobus-pinctrl
> + - amlogic,meson-gxl-aobus-pinctrl
> + - amlogic,meson-axg-aobus-pinctrl
> + - items:
> + - const: amlogic,meson8m2-aobus-pinctrl
> + - const: amlogic,meson8-aobus-pinctrl
> +
> +required:
> + - compatible
> +
> +patternProperties:
> + "^bank@[0-9a-z]+$":
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
> +
> + properties:
> + reg:
> + maxItems: 3
> +
> + reg-names:
> + items:
> + - const: mux
> + - const: pull
> + - const: gpio
> +
> + unevaluatedProperties: false
> +
> +unevaluatedProperties:
> + type: object
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
> +
> +examples:
> + - |
> + pinctrl_aobus: pinctrl {
> + compatible = "amlogic,meson8-aobus-pinctrl";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + bank@14 {
> + reg = <0x14 0x4>,
> + <0x2c 0x4>,
> + <0x24 0x8>;
> + reg-names = "mux", "pull", "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pinctrl_aobus 0 0 16>;
> + };
> +
> + cec_ao_a_h_pins: cec_ao_a_h {
> + mux {
> + groups = "cec_ao_a_h";
> + function = "cec_ao_a_h";
> + bias-disable;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
> new file mode 100644
> index 000000000..c12f9ec58
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson8 CBUS pinmux controller
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +allOf:
> + - $ref: amlogic,meson-pinctrl-common.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - amlogic,meson8-cbus-pinctrl
> + - amlogic,meson8b-cbus-pinctrl
> + - amlogic,meson-gxbb-periphs-pinctrl
> + - amlogic,meson-gxl-periphs-pinctrl
> + - amlogic,meson-axg-periphs-pinctrl
> + - items:
> + - const: amlogic,meson8m2-cbus-pinctrl
> + - const: amlogic,meson8-cbus-pinctrl
> +
> +required:
> + - compatible
> +
> +patternProperties:
> + "^bank@[0-9a-z]+$":
> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
> +
> + properties:
> + reg:
> + maxItems: 4
> +
> + reg-names:
> + items:
> + - const: mux
> + - const: pull
> + - const: pull-enable
> + - const: gpio
> +
> + unevaluatedProperties: false
Wrong placement. Rob asked you to put it after $ref and the review was
conditional based on this. Don't add review-tag if you do not follow the
comment.
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding
2023-03-25 11:18 ` Krzysztof Kozlowski
@ 2023-03-25 11:41 ` Heiner Kallweit
2023-03-25 11:50 ` Krzysztof Kozlowski
0 siblings, 1 reply; 5+ messages in thread
From: Heiner Kallweit @ 2023-03-25 11:41 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-gpio
On 25.03.2023 12:18, Krzysztof Kozlowski wrote:
> On 24/03/2023 23:51, Heiner Kallweit wrote:
>> Convert Amlogic Meson pin controller binding to yaml.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> v2:
>> - consider that more than one compatible can be set
>> - remove bus part from example
>> v3:
>> - remove minItem/maxItem properties for compatible
>> v4:
>> - split patch to be able to deal with the different reg/reg-names
>> v5:
>> - remove compatible definition from common yaml
>> - move pincfg-node and pinmux-node definition to meson-gpio object definition
>> v6:
>> - add meson-pins definition
>> - change usage of unevaluatedProperties
>> v7:
>> - add unevaluatedProperties to meson-gpio references under patternProperties
>> ---
>> .../pinctrl/amlogic,meson-pinctrl-a1.yaml | 67 +++++++++++++
>> .../pinctrl/amlogic,meson-pinctrl-common.yaml | 57 +++++++++++
>> .../amlogic,meson-pinctrl-g12a-aobus.yaml | 68 ++++++++++++++
>> .../amlogic,meson-pinctrl-g12a-periphs.yaml | 72 ++++++++++++++
>> .../pinctrl/amlogic,meson8-pinctrl-aobus.yaml | 76 +++++++++++++++
>> .../pinctrl/amlogic,meson8-pinctrl-cbus.yaml | 78 +++++++++++++++
>> .../bindings/pinctrl/meson,pinctrl.txt | 94 -------------------
>> 7 files changed, 418 insertions(+), 94 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
>> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
>> new file mode 100644
>> index 000000000..1a8f2d248
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
>> @@ -0,0 +1,67 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson A1 pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: amlogic,meson-pinctrl-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - amlogic,meson-a1-periphs-pinctrl
>> + - amlogic,meson-s4-periphs-pinctrl
>> +
>> +required:
>> + - compatible
>> +
>> +patternProperties:
>> + "^bank@[0-9a-z]+$":
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>> +
>> + properties:
>> + reg:
>> + maxItems: 2
>> +
>> + reg-names:
>> + items:
>> + - const: mux
>> + - const: gpio
>> +
>> + unevaluatedProperties: false
>> +
>> +unevaluatedProperties:
>> + type: object
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
>> +
>> +examples:
>> + - |
>> + periphs_pinctrl: pinctrl {
>> + compatible = "amlogic,meson-a1-periphs-pinctrl";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + bank@400 {
>> + reg = <0x0400 0x003c>,
>> + <0x0480 0x0118>;
>> + reg-names = "mux", "gpio";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&periphs_pinctrl 0 0 62>;
>> + };
>> +
>> + cec_ao_a_h_pins: cec_ao_a_h {
>> + mux {
>> + groups = "cec_ao_a_h";
>> + function = "cec_ao_a_h";
>> + bias-disable;
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
>> new file mode 100644
>> index 000000000..a7b29ef0b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
>> @@ -0,0 +1,57 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: pinctrl.yaml#
>> +
>> +properties:
>> + ranges: true
>> +
>> + "#address-cells":
>> + enum: [1, 2]
>> +
>> + "#size-cells":
>> + enum: [1, 2]
>> +
>> +required:
>> + - ranges
>> + - "#address-cells"
>> + - "#size-cells"
>> +
>> +additionalProperties: true
>> +
>> +$defs:
>> + meson-gpio:
>> + type: object
>> +
>> + properties:
>> + gpio-controller: true
>> +
>> + "#gpio-cells":
>> + const: 2
>> +
>> + gpio-ranges:
>> + maxItems: 1
>> +
>> + required:
>> + - reg
>> + - reg-names
>> + - gpio-controller
>> + - "#gpio-cells"
>> + - gpio-ranges
>> +
>> + meson-pins:
>> + type: object
>> + additionalProperties:
>> + type: object
>> + allOf:
>> + - $ref: pincfg-node.yaml#
>> + - $ref: pinmux-node.yaml#
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
>> new file mode 100644
>> index 000000000..6fd3d88f0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
>> @@ -0,0 +1,68 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson G12 AOBUS pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: amlogic,meson-pinctrl-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - amlogic,meson-g12a-aobus-pinctrl
>> +
>> +required:
>> + - compatible
>> +
>> +patternProperties:
>> + "^bank@[0-9a-z]+$":
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>> +
>> + properties:
>> + reg:
>> + maxItems: 3
>> +
>> + reg-names:
>> + items:
>> + - const: mux
>> + - const: ds
>> + - const: gpio
>> +
>> + unevaluatedProperties: false
>> +
>> +unevaluatedProperties:
>> + type: object
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
>> +
>> +examples:
>> + - |
>> + ao_pinctrl: pinctrl {
>> + compatible = "amlogic,meson-g12a-aobus-pinctrl";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + bank@14 {
>> + reg = <0x14 0x8>,
>> + <0x1c 0x8>,
>> + <0x24 0x14>;
>> + reg-names = "mux", "ds", "gpio";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&ao_pinctrl 0 0 15>;
>> + };
>> +
>> + cec_ao_a_h_pins: cec_ao_a_h {
>> + mux {
>> + groups = "cec_ao_a_h";
>> + function = "cec_ao_a_h";
>> + bias-disable;
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
>> new file mode 100644
>> index 000000000..b68d1bb06
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson G12 PERIPHS pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: amlogic,meson-pinctrl-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - amlogic,meson-g12a-periphs-pinctrl
>> +
>> +required:
>> + - compatible
>> +
>> +patternProperties:
>> + "^bank@[0-9a-z]+$":
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>> +
>> + properties:
>> + reg:
>> + maxItems: 5
>> +
>> + reg-names:
>> + items:
>> + - const: gpio
>> + - const: pull
>> + - const: pull-enable
>> + - const: mux
>> + - const: ds
>> +
>> + unevaluatedProperties: false
>> +
>> +unevaluatedProperties:
>> + type: object
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
>> +
>> +examples:
>> + - |
>> + periphs_pinctrl: pinctrl {
>> + compatible = "amlogic,meson-g12a-periphs-pinctrl";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + bank@40 {
>> + reg = <0x40 0x4c>,
>> + <0xe8 0x18>,
>> + <0x120 0x18>,
>> + <0x2c0 0x40>,
>> + <0x340 0x1c>;
>> + reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&periphs_pinctrl 0 0 86>;
>> + };
>> +
>> + cec_ao_a_h_pins: cec_ao_a_h {
>> + mux {
>> + groups = "cec_ao_a_h";
>> + function = "cec_ao_a_h";
>> + bias-disable;
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
>> new file mode 100644
>> index 000000000..f529ecf8e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
>> @@ -0,0 +1,76 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson8 AOBUS pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: amlogic,meson-pinctrl-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - enum:
>> + - amlogic,meson8-aobus-pinctrl
>> + - amlogic,meson8b-aobus-pinctrl
>> + - amlogic,meson-gxbb-aobus-pinctrl
>> + - amlogic,meson-gxl-aobus-pinctrl
>> + - amlogic,meson-axg-aobus-pinctrl
>> + - items:
>> + - const: amlogic,meson8m2-aobus-pinctrl
>> + - const: amlogic,meson8-aobus-pinctrl
>> +
>> +required:
>> + - compatible
>> +
>> +patternProperties:
>> + "^bank@[0-9a-z]+$":
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>> +
>> + properties:
>> + reg:
>> + maxItems: 3
>> +
>> + reg-names:
>> + items:
>> + - const: mux
>> + - const: pull
>> + - const: gpio
>> +
>> + unevaluatedProperties: false
>> +
>> +unevaluatedProperties:
>> + type: object
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
>> +
>> +examples:
>> + - |
>> + pinctrl_aobus: pinctrl {
>> + compatible = "amlogic,meson8-aobus-pinctrl";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + bank@14 {
>> + reg = <0x14 0x4>,
>> + <0x2c 0x4>,
>> + <0x24 0x8>;
>> + reg-names = "mux", "pull", "gpio";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&pinctrl_aobus 0 0 16>;
>> + };
>> +
>> + cec_ao_a_h_pins: cec_ao_a_h {
>> + mux {
>> + groups = "cec_ao_a_h";
>> + function = "cec_ao_a_h";
>> + bias-disable;
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
>> new file mode 100644
>> index 000000000..c12f9ec58
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
>> @@ -0,0 +1,78 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Meson8 CBUS pinmux controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +allOf:
>> + - $ref: amlogic,meson-pinctrl-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - enum:
>> + - amlogic,meson8-cbus-pinctrl
>> + - amlogic,meson8b-cbus-pinctrl
>> + - amlogic,meson-gxbb-periphs-pinctrl
>> + - amlogic,meson-gxl-periphs-pinctrl
>> + - amlogic,meson-axg-periphs-pinctrl
>> + - items:
>> + - const: amlogic,meson8m2-cbus-pinctrl
>> + - const: amlogic,meson8-cbus-pinctrl
>> +
>> +required:
>> + - compatible
>> +
>> +patternProperties:
>> + "^bank@[0-9a-z]+$":
>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>> +
>> + properties:
>> + reg:
>> + maxItems: 4
>> +
>> + reg-names:
>> + items:
>> + - const: mux
>> + - const: pull
>> + - const: pull-enable
>> + - const: gpio
>> +
>> + unevaluatedProperties: false
>
> Wrong placement. Rob asked you to put it after $ref and the review was
> conditional based on this. Don't add review-tag if you do not follow the
> comment.
>
I wasn't aware that this makes a difference, and in e.g. samsung,pinctrl.yaml
I found it at the end of the patternProperties block.
Thanks for the hint, then I will correct this and resubmit.
patternProperties:
"^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
$ref: samsung,pinctrl-pins-cfg.yaml
properties:
samsung,pins:
description: See samsung,pinctrl-pins-cfg.yaml
$ref: /schemas/types.yaml#/definitions/string-array
maxItems: 1
required:
- samsung,pins
unevaluatedProperties: false
> Best regards,
> Krzysztof
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding
2023-03-25 11:41 ` Heiner Kallweit
@ 2023-03-25 11:50 ` Krzysztof Kozlowski
2023-03-25 12:17 ` Heiner Kallweit
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2023-03-25 11:50 UTC (permalink / raw)
To: Heiner Kallweit, Rob Herring, Krzysztof Kozlowski,
Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-gpio
On 25/03/2023 12:41, Heiner Kallweit wrote:
> On 25.03.2023 12:18, Krzysztof Kozlowski wrote:
>> On 24/03/2023 23:51, Heiner Kallweit wrote:
>>> Convert Amlogic Meson pin controller binding to yaml.
>>>
>>> +patternProperties:
>>> + "^bank@[0-9a-z]+$":
>>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>>> +
>>> + properties:
>>> + reg:
>>> + maxItems: 4
>>> +
>>> + reg-names:
>>> + items:
>>> + - const: mux
>>> + - const: pull
>>> + - const: pull-enable
>>> + - const: gpio
>>> +
>>> + unevaluatedProperties: false
>>
>> Wrong placement. Rob asked you to put it after $ref and the review was
>> conditional based on this. Don't add review-tag if you do not follow the
>> comment.
>>
> I wasn't aware that this makes a difference, and in e.g. samsung,pinctrl.yaml
> I found it at the end of the patternProperties block.
> Thanks for the hint, then I will correct this and resubmit.
But Rob asks for it, so regardless whether it makes difference or not,
you ignore the comment?
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding
2023-03-25 11:50 ` Krzysztof Kozlowski
@ 2023-03-25 12:17 ` Heiner Kallweit
0 siblings, 0 replies; 5+ messages in thread
From: Heiner Kallweit @ 2023-03-25 12:17 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-gpio
On 25.03.2023 12:50, Krzysztof Kozlowski wrote:
> On 25/03/2023 12:41, Heiner Kallweit wrote:
>> On 25.03.2023 12:18, Krzysztof Kozlowski wrote:
>>> On 24/03/2023 23:51, Heiner Kallweit wrote:
>>>> Convert Amlogic Meson pin controller binding to yaml.
>>>>
>
>
>>>> +patternProperties:
>>>> + "^bank@[0-9a-z]+$":
>>>> + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
>>>> +
>>>> + properties:
>>>> + reg:
>>>> + maxItems: 4
>>>> +
>>>> + reg-names:
>>>> + items:
>>>> + - const: mux
>>>> + - const: pull
>>>> + - const: pull-enable
>>>> + - const: gpio
>>>> +
>>>> + unevaluatedProperties: false
>>>
>>> Wrong placement. Rob asked you to put it after $ref and the review was
>>> conditional based on this. Don't add review-tag if you do not follow the
>>> comment.
>>>
>> I wasn't aware that this makes a difference, and in e.g. samsung,pinctrl.yaml
>> I found it at the end of the patternProperties block.
>> Thanks for the hint, then I will correct this and resubmit.
>
> But Rob asks for it, so regardless whether it makes difference or not,
> you ignore the comment?
>
I understood the comment as: It needs to be in the block, somewhere after the $ref.
My bad.
> Best regards,
> Krzysztof
>
Heiner
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-03-25 12:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-24 22:51 [PATCH v7] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-03-25 11:18 ` Krzysztof Kozlowski
2023-03-25 11:41 ` Heiner Kallweit
2023-03-25 11:50 ` Krzysztof Kozlowski
2023-03-25 12:17 ` Heiner Kallweit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).