* [PATCH] drm/meson: enable runtime PM
@ 2019-09-25 19:31 Kevin Hilman
2019-09-30 8:20 ` Neil Armstrong
0 siblings, 1 reply; 4+ messages in thread
From: Kevin Hilman @ 2019-09-25 19:31 UTC (permalink / raw)
To: Neil Armstrong, dri-devel; +Cc: linux-amlogic, Kevin Hilman
From: Kevin Hilman <khilman@baylibre.com>
On some SoCs, the VPU is in a power-domain and needs runtime PM
enabled and used in order to keep the power domain on.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
drivers/gpu/drm/meson/meson_drv.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 2310c96fff46..256b6a0e9c6b 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/component.h>
#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
@@ -274,6 +275,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
/* Hardware Initialization */
+ pm_runtime_get_sync(dev);
meson_vpu_init(priv);
meson_venc_init(priv);
meson_vpp_init(priv);
@@ -416,6 +418,7 @@ static int meson_drv_probe(struct platform_device *pdev)
struct device_node *ep, *remote;
int count = 0;
+ pm_runtime_enable(&pdev->dev);
for_each_endpoint_of_node(np, ep) {
remote = of_graph_get_remote_port_parent(ep);
if (!remote || !of_device_is_available(remote)) {
@@ -440,6 +443,7 @@ static int meson_drv_probe(struct platform_device *pdev)
}
/* If no output endpoints were available, simply bail out */
+ pm_runtime_disable(&pdev->dev);
return 0;
};
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/meson: enable runtime PM
2019-09-25 19:31 [PATCH] drm/meson: enable runtime PM Kevin Hilman
@ 2019-09-30 8:20 ` Neil Armstrong
2019-09-30 15:34 ` Kevin Hilman
0 siblings, 1 reply; 4+ messages in thread
From: Neil Armstrong @ 2019-09-30 8:20 UTC (permalink / raw)
To: Kevin Hilman, dri-devel; +Cc: linux-amlogic, Kevin Hilman
Hi Kevin,
On 25/09/2019 21:31, Kevin Hilman wrote:
> From: Kevin Hilman <khilman@baylibre.com>
>
> On some SoCs, the VPU is in a power-domain and needs runtime PM
> enabled and used in order to keep the power domain on.
>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> drivers/gpu/drm/meson/meson_drv.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
> index 2310c96fff46..256b6a0e9c6b 100644
> --- a/drivers/gpu/drm/meson/meson_drv.c
> +++ b/drivers/gpu/drm/meson/meson_drv.c
> @@ -14,6 +14,7 @@
> #include <linux/platform_device.h>
> #include <linux/component.h>
> #include <linux/of_graph.h>
> +#include <linux/pm_runtime.h>
>
> #include <drm/drmP.h>
> #include <drm/drm_atomic.h>
> @@ -274,6 +275,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
>
> /* Hardware Initialization */
>
> + pm_runtime_get_sync(dev);
> meson_vpu_init(priv);
> meson_venc_init(priv);
> meson_vpp_init(priv);
> @@ -416,6 +418,7 @@ static int meson_drv_probe(struct platform_device *pdev)
> struct device_node *ep, *remote;
> int count = 0;
>
> + pm_runtime_enable(&pdev->dev);
> for_each_endpoint_of_node(np, ep) {
> remote = of_graph_get_remote_port_parent(ep);
> if (!remote || !of_device_is_available(remote)) {
> @@ -440,6 +443,7 @@ static int meson_drv_probe(struct platform_device *pdev)
> }
>
> /* If no output endpoints were available, simply bail out */
> + pm_runtime_disable(&pdev->dev);
> return 0;
> };
>
>
I'll rather implement true runtime PM instead,
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/meson: enable runtime PM
2019-09-30 8:20 ` Neil Armstrong
@ 2019-09-30 15:34 ` Kevin Hilman
2019-10-01 8:41 ` Neil Armstrong
0 siblings, 1 reply; 4+ messages in thread
From: Kevin Hilman @ 2019-09-30 15:34 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, dri-devel; +Cc: linux-amlogic
Neil Armstrong <narmstrong@baylibre.com> writes:
> Hi Kevin,
>
> On 25/09/2019 21:31, Kevin Hilman wrote:
>> From: Kevin Hilman <khilman@baylibre.com>
>>
>> On some SoCs, the VPU is in a power-domain and needs runtime PM
>> enabled and used in order to keep the power domain on.
>>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> drivers/gpu/drm/meson/meson_drv.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
>> index 2310c96fff46..256b6a0e9c6b 100644
>> --- a/drivers/gpu/drm/meson/meson_drv.c
>> +++ b/drivers/gpu/drm/meson/meson_drv.c
>> @@ -14,6 +14,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/component.h>
>> #include <linux/of_graph.h>
>> +#include <linux/pm_runtime.h>
>>
>> #include <drm/drmP.h>
>> #include <drm/drm_atomic.h>
>> @@ -274,6 +275,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
>>
>> /* Hardware Initialization */
>>
>> + pm_runtime_get_sync(dev);
>> meson_vpu_init(priv);
>> meson_venc_init(priv);
>> meson_vpp_init(priv);
>> @@ -416,6 +418,7 @@ static int meson_drv_probe(struct platform_device *pdev)
>> struct device_node *ep, *remote;
>> int count = 0;
>>
>> + pm_runtime_enable(&pdev->dev);
>> for_each_endpoint_of_node(np, ep) {
>> remote = of_graph_get_remote_port_parent(ep);
>> if (!remote || !of_device_is_available(remote)) {
>> @@ -440,6 +443,7 @@ static int meson_drv_probe(struct platform_device *pdev)
>> }
>>
>> /* If no output endpoints were available, simply bail out */
>> + pm_runtime_disable(&pdev->dev);
>> return 0;
>> };
>>
>>
>
> I'll rather implement true runtime PM instead,
While this is a minimum implementation, can you explain what you mean by
"true" runtime PM?
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/meson: enable runtime PM
2019-09-30 15:34 ` Kevin Hilman
@ 2019-10-01 8:41 ` Neil Armstrong
0 siblings, 0 replies; 4+ messages in thread
From: Neil Armstrong @ 2019-10-01 8:41 UTC (permalink / raw)
To: Kevin Hilman, Kevin Hilman, dri-devel; +Cc: linux-amlogic
On 30/09/2019 17:34, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
>
>> Hi Kevin,
>>
>> On 25/09/2019 21:31, Kevin Hilman wrote:
>>> From: Kevin Hilman <khilman@baylibre.com>
>>>
>>> On some SoCs, the VPU is in a power-domain and needs runtime PM
>>> enabled and used in order to keep the power domain on.
>>>
>>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>>> ---
>>> drivers/gpu/drm/meson/meson_drv.c | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
>>> index 2310c96fff46..256b6a0e9c6b 100644
>>> --- a/drivers/gpu/drm/meson/meson_drv.c
>>> +++ b/drivers/gpu/drm/meson/meson_drv.c
>>> @@ -14,6 +14,7 @@
>>> #include <linux/platform_device.h>
>>> #include <linux/component.h>
>>> #include <linux/of_graph.h>
>>> +#include <linux/pm_runtime.h>
>>>
>>> #include <drm/drmP.h>
>>> #include <drm/drm_atomic.h>
>>> @@ -274,6 +275,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
>>>
>>> /* Hardware Initialization */
>>>
>>> + pm_runtime_get_sync(dev);
>>> meson_vpu_init(priv);
>>> meson_venc_init(priv);
>>> meson_vpp_init(priv);
>>> @@ -416,6 +418,7 @@ static int meson_drv_probe(struct platform_device *pdev)
>>> struct device_node *ep, *remote;
>>> int count = 0;
>>>
>>> + pm_runtime_enable(&pdev->dev);
>>> for_each_endpoint_of_node(np, ep) {
>>> remote = of_graph_get_remote_port_parent(ep);
>>> if (!remote || !of_device_is_available(remote)) {
>>> @@ -440,6 +443,7 @@ static int meson_drv_probe(struct platform_device *pdev)
>>> }
>>>
>>> /* If no output endpoints were available, simply bail out */
>>> + pm_runtime_disable(&pdev->dev);
>>> return 0;
>>> };
>>>
>>>
>>
>> I'll rather implement true runtime PM instead,
>
> While this is a minimum implementation, can you explain what you mean by
> "true" runtime PM?
Implementing runtime_sync()/_put when the display is used/unused.
ARM did a good job in their malidp driver.
Neil
>
> Kevin
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-01 8:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-25 19:31 [PATCH] drm/meson: enable runtime PM Kevin Hilman
2019-09-30 8:20 ` Neil Armstrong
2019-09-30 15:34 ` Kevin Hilman
2019-10-01 8:41 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).