[PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...)

[PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...)

[Julien Masson]

This patch series aims to clean-up differents parts of the drm meson
code source.

Couple macros have been defined and used to set several registers
instead of using magic constants.

I also took the opportunity to:
- add/remove/update comments
- remove useless code
- minor fix/improvment

Julien Masson (9):
  drm: meson: mask value when writing bits relaxed
  drm: meson: crtc: use proper macros instead of magic constants
  drm: meson: drv: use macro when initializing vpu
  drm: meson: vpp: use proper macros instead of magic constants
  drm: meson: viu: use proper macros instead of magic constants
  drm: meson: venc: use proper macros instead of magic constants
  drm: meson: global clean-up
  drm: meson: add macro used to enable HDMI PLL
  drm: meson: venc: set the correct macrovision max amplitude value

 drivers/gpu/drm/meson/meson_crtc.c      |  17 ++-
 drivers/gpu/drm/meson/meson_drv.c       |  26 +++-
 drivers/gpu/drm/meson/meson_dw_hdmi.c   |   2 +
 drivers/gpu/drm/meson/meson_dw_hdmi.h   |  12 +-
 drivers/gpu/drm/meson/meson_plane.c     |   2 +-
 drivers/gpu/drm/meson/meson_registers.h | 136 ++++++++++++++++---
 drivers/gpu/drm/meson/meson_vclk.c      |   7 +-
 drivers/gpu/drm/meson/meson_venc.c      | 169 ++++++++++++++++++------
 drivers/gpu/drm/meson/meson_venc_cvbs.c |   3 +-
 drivers/gpu/drm/meson/meson_viu.c       |  82 ++++++------
 drivers/gpu/drm/meson/meson_vpp.c       |  27 ++--
 11 files changed, 362 insertions(+), 121 deletions(-)

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/9] drm: meson: mask value when writing bits relaxed

[Julien Masson]

The value used in the macro writel_bits_relaxed has to be masked since
we don't want change the bits outside the mask.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_registers.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index cfaf90501bb1..c7dfbd7454e5 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -20,7 +20,7 @@
 #define _REG(reg)	((reg) << 2)
 
 #define writel_bits_relaxed(mask, val, addr) \
-	writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr)
+	writel_relaxed((readl_relaxed(addr) & ~(mask)) | ((val) & (mask)), addr)
 
 /* vpp2 */
 #define VPP2_DUMMY_DATA 0x1900
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/9] drm: meson: crtc: use proper macros instead of magic constants

[Julien Masson]

This patch add new macros which describe couple bits field of the
following registers:
- VD1_BLEND_SRC_CTRL
- VPP_SC_MISC

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_crtc.c      | 17 +++++++++++------
 drivers/gpu/drm/meson/meson_registers.h | 16 ++++++++++++++++
 2 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
index aa8ea107524e..6f7d6d258615 100644
--- a/drivers/gpu/drm/meson/meson_crtc.c
+++ b/drivers/gpu/drm/meson/meson_crtc.c
@@ -267,11 +267,11 @@ static void meson_crtc_enable_vd1(struct meson_drm *priv)
 
 static void meson_g12a_crtc_enable_vd1(struct meson_drm *priv)
 {
-	writel_relaxed(((1 << 16) | /* post bld premult*/
-			(1 << 8) | /* post src */
-			(1 << 4) | /* pre bld premult*/
-			(1 << 0)),
-			priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
+	writel_relaxed(VD_BLEND_PREBLD_SRC_VD1 |
+		       VD_BLEND_PREBLD_PREMULT_EN |
+		       VD_BLEND_POSTBLD_SRC_VD1 |
+		       VD_BLEND_POSTBLD_PREMULT_EN,
+		       priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
 }
 
 void meson_crtc_irq(struct meson_drm *priv)
@@ -489,7 +489,12 @@ void meson_crtc_irq(struct meson_drm *priv)
 		writel_relaxed(priv->viu.vd1_range_map_cr,
 				priv->io_base + meson_crtc->viu_offset +
 				_REG(VD1_IF0_RANGE_MAP_CR));
-		writel_relaxed(0x78404,
+		writel_relaxed(VPP_VSC_BANK_LENGTH(4) |
+			       VPP_HSC_BANK_LENGTH(4) |
+			       VPP_SC_VD_EN_ENABLE |
+			       VPP_SC_TOP_EN_ENABLE |
+			       VPP_SC_HSC_EN_ENABLE |
+			       VPP_SC_VSC_EN_ENABLE,
 				priv->io_base + _REG(VPP_SC_MISC));
 		writel_relaxed(priv->viu.vpp_pic_in_height,
 				priv->io_base + _REG(VPP_PIC_IN_HEIGHT));
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index c7dfbd7454e5..55f5fe21ff5e 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -370,6 +370,12 @@
 #define VPP_HSC_REGION4_PHASE_SLOPE 0x1d17
 #define VPP_HSC_PHASE_CTRL 0x1d18
 #define VPP_SC_MISC 0x1d19
+#define		VPP_SC_VD_EN_ENABLE             BIT(15)
+#define		VPP_SC_TOP_EN_ENABLE            BIT(16)
+#define		VPP_SC_HSC_EN_ENABLE            BIT(17)
+#define		VPP_SC_VSC_EN_ENABLE            BIT(18)
+#define		VPP_VSC_BANK_LENGTH(length)     (length & 0x7)
+#define		VPP_HSC_BANK_LENGTH(length)     ((length & 0x7) << 8)
 #define VPP_PREBLEND_VD1_H_START_END 0x1d1a
 #define VPP_PREBLEND_VD1_V_START_END 0x1d1b
 #define VPP_POSTBLEND_VD1_H_START_END 0x1d1c
@@ -1638,6 +1644,16 @@
 #define VPP_SLEEP_CTRL 0x1dfa
 #define VD1_BLEND_SRC_CTRL 0x1dfb
 #define VD2_BLEND_SRC_CTRL 0x1dfc
+#define		VD_BLEND_PREBLD_SRC_VD1         (1 << 0)
+#define		VD_BLEND_PREBLD_SRC_VD2         (2 << 0)
+#define		VD_BLEND_PREBLD_SRC_OSD1        (3 << 0)
+#define		VD_BLEND_PREBLD_SRC_OSD2        (4 << 0)
+#define		VD_BLEND_PREBLD_PREMULT_EN      BIT(4)
+#define		VD_BLEND_POSTBLD_SRC_VD1        (1 << 8)
+#define		VD_BLEND_POSTBLD_SRC_VD2        (2 << 8)
+#define		VD_BLEND_POSTBLD_SRC_OSD1       (3 << 8)
+#define		VD_BLEND_POSTBLD_SRC_OSD2       (4 << 8)
+#define		VD_BLEND_POSTBLD_PREMULT_EN     BIT(16)
 #define OSD1_BLEND_SRC_CTRL 0x1dfd
 #define OSD2_BLEND_SRC_CTRL 0x1dfe
 
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/9] drm: meson: drv: use macro when initializing vpu

[Julien Masson]

This patch add new macro which is used to set WRARB/RDARB mode of
the VPU.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_drv.c       | 26 +++++++++++++++++++++----
 drivers/gpu/drm/meson/meson_registers.h |  1 +
 2 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 2310c96fff46..50096697adc3 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -149,10 +149,28 @@ static struct regmap_config meson_regmap_config = {
 
 static void meson_vpu_init(struct meson_drm *priv)
 {
-	writel_relaxed(0x210000, priv->io_base + _REG(VPU_RDARB_MODE_L1C1));
-	writel_relaxed(0x10000, priv->io_base + _REG(VPU_RDARB_MODE_L1C2));
-	writel_relaxed(0x900000, priv->io_base + _REG(VPU_RDARB_MODE_L2C1));
-	writel_relaxed(0x20000, priv->io_base + _REG(VPU_WRARB_MODE_L2C1));
+	u32 value;
+
+	/*
+	 * Slave dc0 and dc5 connected to master port 1.
+	 * By default other slaves are connected to master port 0.
+	 */
+	value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1) |
+		VPU_RDARB_SLAVE_TO_MASTER_PORT(5, 1);
+	writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C1));
+
+	/* Slave dc0 connected to master port 1 */
+	value = VPU_RDARB_SLAVE_TO_MASTER_PORT(0, 1);
+	writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L1C2));
+
+	/* Slave dc4 and dc7 connected to master port 1 */
+	value = VPU_RDARB_SLAVE_TO_MASTER_PORT(4, 1) |
+		VPU_RDARB_SLAVE_TO_MASTER_PORT(7, 1);
+	writel_relaxed(value, priv->io_base + _REG(VPU_RDARB_MODE_L2C1));
+
+	/* Slave dc1 connected to master port 1 */
+	value = VPU_RDARB_SLAVE_TO_MASTER_PORT(1, 1);
+	writel_relaxed(value, priv->io_base + _REG(VPU_WRARB_MODE_L2C1));
 }
 
 static void meson_remove_framebuffers(void)
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 55f5fe21ff5e..a9db49e5bdd6 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -1496,6 +1496,7 @@
 #define VPU_RDARB_MODE_L1C2 0x2799
 #define VPU_RDARB_MODE_L2C1 0x279d
 #define VPU_WRARB_MODE_L2C1 0x27a2
+#define		VPU_RDARB_SLAVE_TO_MASTER_PORT(dc, port) (port << (16 + dc))
 
 /* osd super scale */
 #define OSDSR_HV_SIZEIN 0x3130
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 4/9] drm: meson: vpp: use proper macros instead of magic constants

[Julien Masson]

This patch add new macros which are used to set the following
registers:
- VPP_OSD_SCALE_COEF_IDX
- VPP_DOLBY_CTRL
- VPP_OFIFO_SIZE
- VPP_HOLD_LINES
- VPP_SC_MISC
- VPP_VADJ_CTRL

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_registers.h |  8 ++++++++
 drivers/gpu/drm/meson/meson_vpp.c       | 27 ++++++++++++++++---------
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index a9db49e5bdd6..172f0794e0cd 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -349,6 +349,7 @@
 #define VPP_LINE_IN_LENGTH 0x1d01
 #define VPP_PIC_IN_HEIGHT 0x1d02
 #define VPP_SCALE_COEF_IDX 0x1d03
+#define		VPP_SCALE_HORIZONTAL_COEF       BIT(8)
 #define VPP_SCALE_COEF 0x1d04
 #define VPP_VSC_REGION12_STARTP 0x1d05
 #define VPP_VSC_REGION34_STARTP 0x1d06
@@ -385,6 +386,8 @@
 #define VPP_PREBLEND_H_SIZE 0x1d20
 #define VPP_POSTBLEND_H_SIZE 0x1d21
 #define VPP_HOLD_LINES 0x1d22
+#define		VPP_POSTBLEND_HOLD_LINES(lines) (lines & 0xf)
+#define		VPP_PREBLEND_HOLD_LINES(lines)  ((lines & 0xf) << 8)
 #define VPP_BLEND_ONECOLOR_CTRL 0x1d23
 #define VPP_PREBLEND_CURRENT_XY 0x1d24
 #define VPP_POSTBLEND_CURRENT_XY 0x1d25
@@ -403,6 +406,8 @@
 #define		VPP_OSD2_PREBLEND	BIT(17)
 #define		VPP_COLOR_MNG_ENABLE	BIT(28)
 #define VPP_OFIFO_SIZE 0x1d27
+#define		VPP_OFIFO_SIZE_MASK             GENMASK(13, 0)
+#define		VPP_OFIFO_SIZE_DEFAULT          (0xfff << 20 | 0x1000)
 #define VPP_FIFO_STATUS 0x1d28
 #define VPP_SMOKE_CTRL 0x1d29
 #define VPP_SMOKE1_VAL 0x1d2a
@@ -418,6 +423,8 @@
 #define VPP_HSC_PHASE_CTRL1 0x1d34
 #define VPP_HSC_INI_PAT_CTRL 0x1d35
 #define VPP_VADJ_CTRL 0x1d40
+#define		VPP_MINUS_BLACK_LVL_VADJ1_ENABLE BIT(1)
+
 #define VPP_VADJ1_Y 0x1d41
 #define VPP_VADJ1_MA_MB 0x1d42
 #define VPP_VADJ1_MC_MD 0x1d43
@@ -477,6 +484,7 @@
 #define VPP_PEAKING_VGAIN 0x1d92
 #define VPP_PEAKING_NLP_1 0x1d93
 #define VPP_DOLBY_CTRL 0x1d93
+#define VPP_PPS_DUMMY_DATA_MODE (1 << 17)
 #define VPP_PEAKING_NLP_2 0x1d94
 #define VPP_PEAKING_NLP_3 0x1d95
 #define VPP_PEAKING_NLP_4 0x1d96
diff --git a/drivers/gpu/drm/meson/meson_vpp.c b/drivers/gpu/drm/meson/meson_vpp.c
index bfee30fa6e34..c2aaf81b0101 100644
--- a/drivers/gpu/drm/meson/meson_vpp.c
+++ b/drivers/gpu/drm/meson/meson_vpp.c
@@ -57,7 +57,7 @@ static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv,
 {
 	int i;
 
-	writel_relaxed(is_horizontal ? BIT(8) : 0,
+	writel_relaxed(is_horizontal ? VPP_SCALE_HORIZONTAL_COEF : 0,
 			priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX));
 	for (i = 0; i < 33; i++)
 		writel_relaxed(coefs[i],
@@ -82,7 +82,7 @@ static void meson_vpp_write_vd_scaling_filter_coefs(struct meson_drm *priv,
 {
 	int i;
 
-	writel_relaxed(is_horizontal ? BIT(8) : 0,
+	writel_relaxed(is_horizontal ? VPP_SCALE_HORIZONTAL_COEF : 0,
 			priv->io_base + _REG(VPP_SCALE_COEF_IDX));
 	for (i = 0; i < 33; i++)
 		writel_relaxed(coefs[i],
@@ -97,20 +97,22 @@ void meson_vpp_init(struct meson_drm *priv)
 	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
 		writel_bits_relaxed(0xff << 16, 0xff << 16,
 				    priv->io_base + _REG(VIU_MISC_CTRL1));
-		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
-		writel_relaxed(0x1020080,
+		writel_relaxed(VPP_PPS_DUMMY_DATA_MODE,
+			       priv->io_base + _REG(VPP_DOLBY_CTRL));
+		writel_relaxed(0x108080,
 				priv->io_base + _REG(VPP_DUMMY_DATA1));
 	} else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
 		writel_relaxed(0xf, priv->io_base + _REG(DOLBY_PATH_CTRL));
 
 	/* Initialize vpu fifo control registers */
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
-		writel_relaxed(0xfff << 20 | 0x1000,
+		writel_relaxed(VPP_OFIFO_SIZE_DEFAULT,
 			       priv->io_base + _REG(VPP_OFIFO_SIZE));
 	else
-		writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) |
-				0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE));
-	writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES));
+		writel_bits_relaxed(VPP_OFIFO_SIZE_MASK, 0x77f,
+				    priv->io_base + _REG(VPP_OFIFO_SIZE));
+	writel_relaxed(VPP_POSTBLEND_HOLD_LINES(4) | VPP_PREBLEND_HOLD_LINES(4),
+		       priv->io_base + _REG(VPP_HOLD_LINES));
 
 	if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
 		/* Turn off preblend */
@@ -138,10 +140,15 @@ void meson_vpp_init(struct meson_drm *priv)
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
-	writel_relaxed(4 | (4 << 8) | BIT(15),
+
+	/* Set horizontal/vertical bank length and enable video scale out */
+	writel_relaxed(VPP_VSC_BANK_LENGTH(4) | VPP_HSC_BANK_LENGTH(4) |
+		       VPP_SC_VD_EN_ENABLE,
 		       priv->io_base + _REG(VPP_SC_MISC));
 
-	writel_relaxed(1, priv->io_base + _REG(VPP_VADJ_CTRL));
+	/* Enable minus black level for vadj1 */
+	writel_relaxed(VPP_MINUS_BLACK_LVL_VADJ1_ENABLE,
+		       priv->io_base + _REG(VPP_VADJ_CTRL));
 
 	/* Write in the proper filter coefficients. */
 	meson_vpp_write_scaling_filter_coefs(priv,
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/9] drm: meson: vpp: use proper macros instead of magic constants

[Kevin Hilman]

Julien Masson <jmasson@baylibre.com> writes:

> This patch add new macros which are used to set the following
> registers:
> - VPP_OSD_SCALE_COEF_IDX
> - VPP_DOLBY_CTRL
> - VPP_OFIFO_SIZE
> - VPP_HOLD_LINES
> - VPP_SC_MISC
> - VPP_VADJ_CTRL
>
> Signed-off-by: Julien Masson <jmasson@baylibre.com>

[...]

> @@ -97,20 +97,22 @@ void meson_vpp_init(struct meson_drm *priv)
>  	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
>  		writel_bits_relaxed(0xff << 16, 0xff << 16,
>  				    priv->io_base + _REG(VIU_MISC_CTRL1));
> -		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
> -		writel_relaxed(0x1020080,
> +		writel_relaxed(VPP_PPS_DUMMY_DATA_MODE,
> +			       priv->io_base + _REG(VPP_DOLBY_CTRL));
> +		writel_relaxed(0x108080,

nit: still a magic constant here, and it's not obvious why it's
different from the current one.

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 4/9] drm: meson: vpp: use proper macros instead of magic constants

[Neil Armstrong]

On 25/06/2019 01:15, Kevin Hilman wrote:
> Julien Masson <jmasson@baylibre.com> writes:
> 
>> This patch add new macros which are used to set the following
>> registers:
>> - VPP_OSD_SCALE_COEF_IDX
>> - VPP_DOLBY_CTRL
>> - VPP_OFIFO_SIZE
>> - VPP_HOLD_LINES
>> - VPP_SC_MISC
>> - VPP_VADJ_CTRL
>>
>> Signed-off-by: Julien Masson <jmasson@baylibre.com>
> 
> [...]
> 
>> @@ -97,20 +97,22 @@ void meson_vpp_init(struct meson_drm *priv)
>>  	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
>>  		writel_bits_relaxed(0xff << 16, 0xff << 16,
>>  				    priv->io_base + _REG(VIU_MISC_CTRL1));
>> -		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
>> -		writel_relaxed(0x1020080,
>> +		writel_relaxed(VPP_PPS_DUMMY_DATA_MODE,
>> +			       priv->io_base + _REG(VPP_DOLBY_CTRL));
>> +		writel_relaxed(0x108080,
> 
> nit: still a magic constant here, and it's not obvious why it's
> different from the current one.

This is a magic constant, it's a color, but indeed it should not change.

0x1020080 is the 10bit variant of 0x108080, on purpose.

Neil

> 
> Kevin
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 5/9] drm: meson: viu: use proper macros instead of magic constants

[Julien Masson]

This patch add new macros which are used to set the following
registers:
- VIU_SW_RESET
- VIU_OSD1_CTRL_STAT
- VIU_OSD2_CTRL_STAT
- VIU_OSD1_FIFO_CTRL_STAT
- VIU_OSD2_FIFO_CTRL_STAT
- VIU_MISC_CTRL0
- VIU_OSD_BLEND_CTRL
- OSD1_BLEND_SRC_CTRL
- OSD2_BLEND_SRC_CTRL
- DOLBY_PATH_CTRL

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_plane.c     |  2 +-
 drivers/gpu/drm/meson/meson_registers.h | 27 ++++++++
 drivers/gpu/drm/meson/meson_viu.c       | 82 +++++++++++++------------
 3 files changed, 72 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index d90427b93a51..f2b2be1e8088 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -318,7 +318,7 @@ static void meson_plane_atomic_disable(struct drm_plane *plane,
 
 	/* Disable OSD1 */
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
-		writel_bits_relaxed(3 << 8, 0,
+		writel_bits_relaxed(VIU_OSD1_POSTBLD_SRC_OSD1, 0,
 				    priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
 	else
 		writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 172f0794e0cd..7a52aac7e28a 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -146,11 +146,19 @@
 #define VIU_ADDR_START 0x1a00
 #define VIU_ADDR_END 0x1aff
 #define VIU_SW_RESET 0x1a01
+#define		VIU_SW_RESET_OSD1               BIT(0)
 #define VIU_MISC_CTRL0 0x1a06
+#define		VIU_CTRL0_VD1_AFBC_MASK         0x170000
 #define VIU_MISC_CTRL1 0x1a07
 #define D2D3_INTF_LENGTH 0x1a08
 #define D2D3_INTF_CTRL0 0x1a09
 #define VIU_OSD1_CTRL_STAT 0x1a10
+#define		VIU_OSD1_OSD_BLK_ENABLE         BIT(0)
+#define		VIU_OSD1_POSTBLD_SRC_VD1        (1 << 8)
+#define		VIU_OSD1_POSTBLD_SRC_VD2        (2 << 8)
+#define		VIU_OSD1_POSTBLD_SRC_OSD1       (3 << 8)
+#define		VIU_OSD1_POSTBLD_SRC_OSD2       (4 << 8)
+#define		VIU_OSD1_OSD_ENABLE             BIT(21)
 #define VIU_OSD1_CTRL_STAT2 0x1a2d
 #define VIU_OSD1_COLOR_ADDR 0x1a11
 #define VIU_OSD1_COLOR 0x1a12
@@ -240,6 +248,12 @@
 #define VIU_OSD3_MALI_UNPACK_CTRL 0x3d9f
 #define VIU_OSD3_DIMM_CTRL 0x3da0
 
+#define VIU_OSD_DDR_PRIORITY_URGENT      BIT(0)
+#define VIU_OSD_HOLD_FIFO_LINES(lines)   ((lines & 0x1f) << 5)
+#define VIU_OSD_FIFO_DEPTH_VAL(val)      ((val & 0x7f) << 12)
+#define VIU_OSD_WORDS_PER_BURST(words)   (((words & 0x4) >> 1) << 22)
+#define VIU_OSD_FIFO_LIMITS(size)        ((size & 0xf) << 24)
+
 #define VD1_IF0_GEN_REG 0x1a50
 #define VD1_IF0_CANVAS0 0x1a51
 #define VD1_IF0_CANVAS1 0x1a52
@@ -1620,10 +1634,18 @@
 #define VPU_MAFBC_PREFETCH_CFG_S3 0x3a7c
 
 #define DOLBY_PATH_CTRL 0x1a0c
+#define		DOLBY_BYPASS_EN(val)            (val & 0xf)
 #define OSD_PATH_MISC_CTRL 0x1a0e
 #define MALI_AFBCD_TOP_CTRL 0x1a0f
 
 #define VIU_OSD_BLEND_CTRL 0x39b0
+#define		VIU_OSD_BLEND_REORDER(dest, src)      ((src) << (dest * 4))
+#define		VIU_OSD_BLEND_DIN_EN(bits)            ((bits & 0xf) << 20)
+#define		VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1   BIT(24)
+#define		VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2  BIT(25)
+#define		VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0    BIT(26)
+#define		VIU_OSD_BLEND_BLEN2_PREMULT_EN(input) ((input & 0x3) << 27)
+#define		VIU_OSD_BLEND_HOLD_LINES(lines)       ((lines & 0x7) << 29)
 #define VIU_OSD_BLEND_CTRL1 0x39c0
 #define VIU_OSD_BLEND_DIN0_SCOPE_H 0x39b1
 #define VIU_OSD_BLEND_DIN0_SCOPE_V 0x39b2
@@ -1665,6 +1687,11 @@
 #define		VD_BLEND_POSTBLD_PREMULT_EN     BIT(16)
 #define OSD1_BLEND_SRC_CTRL 0x1dfd
 #define OSD2_BLEND_SRC_CTRL 0x1dfe
+#define		OSD_BLEND_POSTBLD_SRC_VD1       (1 << 8)
+#define		OSD_BLEND_POSTBLD_SRC_VD2       (2 << 8)
+#define		OSD_BLEND_POSTBLD_SRC_OSD1      (3 << 8)
+#define		OSD_BLEND_POSTBLD_SRC_OSD2      (4 << 8)
+#define		OSD_BLEND_PATH_SEL_ENABLE       BIT(20)
 
 #define VPP_POST_BLEND_BLEND_DUMMY_DATA 0x3968
 #define VPP_POST_BLEND_DUMMY_ALPHA 0x3969
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index 4b2b3024d371..8b7fde2de489 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -323,9 +323,9 @@ void meson_viu_osd1_reset(struct meson_drm *priv)
 				priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
 
 	/* Reset OSD1 */
-	writel_bits_relaxed(BIT(0), BIT(0),
+	writel_bits_relaxed(VIU_SW_RESET_OSD1, VIU_SW_RESET_OSD1,
 			    priv->io_base + _REG(VIU_SW_RESET));
-	writel_bits_relaxed(BIT(0), 0,
+	writel_bits_relaxed(VIU_SW_RESET_OSD1, 0,
 			    priv->io_base + _REG(VIU_SW_RESET));
 
 	/* Rewrite these registers state lost in the reset */
@@ -338,15 +338,22 @@ void meson_viu_osd1_reset(struct meson_drm *priv)
 	meson_viu_load_matrix(priv);
 }
 
+static inline uint32_t meson_viu_osd_burst_length_reg(uint32_t length)
+{
+	uint32_t val = (((length & 0x80) % 24) / 12);
+
+	return (((val & 0x3) << 10) | (((val & 0x4) >> 2) << 31));
+}
+
 void meson_viu_init(struct meson_drm *priv)
 {
 	uint32_t reg;
 
 	/* Disable OSDs */
-	writel_bits_relaxed(BIT(0) | BIT(21), 0,
-			priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
-	writel_bits_relaxed(BIT(0) | BIT(21), 0,
-			priv->io_base + _REG(VIU_OSD2_CTRL_STAT));
+	writel_bits_relaxed(VIU_OSD1_OSD_BLK_ENABLE | VIU_OSD1_OSD_ENABLE, 0,
+			    priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
+	writel_bits_relaxed(VIU_OSD1_OSD_BLK_ENABLE | VIU_OSD1_OSD_ENABLE, 0,
+			    priv->io_base + _REG(VIU_OSD2_CTRL_STAT));
 
 	/* On GXL/GXM, Use the 10bit HDR conversion matrix */
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
@@ -357,19 +364,17 @@ void meson_viu_init(struct meson_drm *priv)
 					       true);
 
 	/* Initialize OSD1 fifo control register */
-	reg = BIT(0) |	/* Urgent DDR request priority */
-	      (4 << 5); /* hold_fifo_lines */
+	reg = VIU_OSD_DDR_PRIORITY_URGENT |
+		VIU_OSD_HOLD_FIFO_LINES(4) |
+		VIU_OSD_FIFO_DEPTH_VAL(32) | /* fifo_depth_val: 32*8=256 */
+		VIU_OSD_WORDS_PER_BURST(4) | /* 4 words in 1 burst */
+		VIU_OSD_FIFO_LIMITS(2);      /* fifo_lim: 2*16=32 */
+
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
-		reg |= (1 << 10) | /* burst length 32 */
-		       (32 << 12) | /* fifo_depth_val: 32*8=256 */
-		       (2 << 22) | /* 4 words in 1 burst */
-		       (2 << 24) |
-		       (1 << 31);
+		reg |= meson_viu_osd_burst_length_reg(32);
 	else
-		reg |= (3 << 10) | /* burst length 64 */
-		       (32 << 12) | /* fifo_depth_val: 32*8=256 */
-		       (2 << 22) | /* 4 words in 1 burst */
-		       (2 << 24);
+		reg |= meson_viu_osd_burst_length_reg(64);
+
 	writel_relaxed(reg, priv->io_base + _REG(VIU_OSD1_FIFO_CTRL_STAT));
 	writel_relaxed(reg, priv->io_base + _REG(VIU_OSD2_FIFO_CTRL_STAT));
 
@@ -382,12 +387,9 @@ void meson_viu_init(struct meson_drm *priv)
 			    priv->io_base + _REG(VIU_OSD2_CTRL_STAT2));
 
 	/* Disable VD1 AFBC */
-	/* di_mif0_en=0 mif0_to_vpp_en=0 di_mad_en=0 */
-	writel_bits_relaxed(0x7 << 16, 0,
-			priv->io_base + _REG(VIU_MISC_CTRL0));
-	/* afbc vd1 set=0 */
-	writel_bits_relaxed(BIT(20), 0,
-			priv->io_base + _REG(VIU_MISC_CTRL0));
+	/* di_mif0_en=0 mif0_to_vpp_en=0 di_mad_en=0 and afbc vd1 set=0*/
+	writel_bits_relaxed(VIU_CTRL0_VD1_AFBC_MASK, 0,
+			    priv->io_base + _REG(VIU_MISC_CTRL0));
 	writel_relaxed(0, priv->io_base + _REG(AFBC_ENABLE));
 
 	writel_relaxed(0x00FF00C0,
@@ -396,27 +398,31 @@ void meson_viu_init(struct meson_drm *priv)
 			priv->io_base + _REG(VD2_IF0_LUMA_FIFO_SIZE));
 
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
-		writel_relaxed(4 << 29 |
-				1 << 27 |
-				1 << 26 | /* blend_din0 input to blend0 */
-				1 << 25 | /* blend1_dout to blend2 */
-				1 << 24 | /* blend1_din3 input to blend1 */
-				1 << 20 |
-				0 << 16 |
-				1,
-				priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
-		writel_relaxed(1 << 20,
-				priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
-		writel_relaxed(1 << 20,
-				priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
+		writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
+			       VIU_OSD_BLEND_REORDER(1, 0) |
+			       VIU_OSD_BLEND_REORDER(2, 0) |
+			       VIU_OSD_BLEND_REORDER(3, 0) |
+			       VIU_OSD_BLEND_DIN_EN(1) |
+			       VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 |
+			       VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 |
+			       VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 |
+			       VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) |
+			       VIU_OSD_BLEND_HOLD_LINES(4),
+			       priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
+
+		writel_relaxed(VIU_OSD1_POSTBLD_SRC_OSD1,
+			       priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
+		writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE,
+			       priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
 		writel_relaxed(0, priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
 		writel_relaxed(0, priv->io_base + _REG(VD2_BLEND_SRC_CTRL));
 		writel_relaxed(0,
 				priv->io_base + _REG(VIU_OSD_BLEND_DUMMY_DATA0));
 		writel_relaxed(0,
 				priv->io_base + _REG(VIU_OSD_BLEND_DUMMY_ALPHA));
-		writel_bits_relaxed(0x3 << 2, 0x3 << 2,
-				priv->io_base + _REG(DOLBY_PATH_CTRL));
+
+		writel_bits_relaxed(DOLBY_BYPASS_EN(0xc), DOLBY_BYPASS_EN(0xc),
+				    priv->io_base + _REG(DOLBY_PATH_CTRL));
 	}
 
 	priv->viu.osd1_enabled = false;
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 6/9] drm: meson: venc: use proper macros instead of magic constants

[Julien Masson]

This patch add new macros which are used to set the following
registers:
- ENCI_CFILT_CTRL
- ENCI_CFILT_CTRL2
- ENCI_MACV_MAX_AMP
- ENCI_VIDEO_MODE_ADV
- ENCI_VFIFO2VD_CTL
- ENCI_VIDEO_EN
- ENCP_VIDEO_MODE
- VPU_HDMI_SETTING
- VENC_UPSAMPLE_CTRL0
- VENC_UPSAMPLE_CTRL1
- VENC_UPSAMPLE_CTRL2
- VENC_VDAC_FIFO_CTRL
- VENC_VDAC_DAC0_FILT_CTRL0
- VENC_INTCTRL

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_registers.h |  51 ++++++++
 drivers/gpu/drm/meson/meson_venc.c      | 155 +++++++++++++++++++-----
 drivers/gpu/drm/meson/meson_venc_cvbs.c |   3 +-
 3 files changed, 177 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 7a52aac7e28a..537a779492bd 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -742,6 +742,25 @@
 #define VENC_UPSAMPLE_CTRL0 0x1b64
 #define VENC_UPSAMPLE_CTRL1 0x1b65
 #define VENC_UPSAMPLE_CTRL2 0x1b66
+#define		VENC_UPSAMPLE_CTRL_F0_2_CLK_RATIO        BIT(0)
+#define		VENC_UPSAMPLE_CTRL_F1_EN                 BIT(5)
+#define		VENC_UPSAMPLE_CTRL_F1_UPSAMPLE_EN        BIT(6)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_HIGH_LUMA   (0x0 << 12)
+#define		VENC_UPSAMPLE_CTRL_CVBS                  (0x1 << 12)
+#define		VENC_UPSAMPLE_CTRL_S_VIDEO_LUMA          (0x2 << 12)
+#define		VENC_UPSAMPLE_CTRL_S_VIDEO_CHROMA        (0x3 << 12)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_PB          (0x4 << 12)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_PR          (0x5 << 12)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_R           (0x6 << 12)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_G           (0x7 << 12)
+#define		VENC_UPSAMPLE_CTRL_INTERLACE_B           (0x8 << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_Y         (0x9 << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_PB        (0xa << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_PR        (0xb << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_R         (0xc << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_G         (0xd << 12)
+#define		VENC_UPSAMPLE_CTRL_PROGRESSIVE_B         (0xe << 12)
+#define		VENC_UPSAMPLE_CTRL_VDAC_TEST_VALUE       (0xf << 12)
 #define TCON_INVERT_CTL 0x1b67
 #define VENC_VIDEO_PROG_MODE 0x1b68
 #define VENC_ENCI_LINE 0x1b69
@@ -750,6 +769,7 @@
 #define VENC_ENCP_PIXEL 0x1b6c
 #define VENC_STATA 0x1b6d
 #define VENC_INTCTRL 0x1b6e
+#define		VENC_INTCTRL_ENCI_LNRST_INT_EN  BIT(1)
 #define VENC_INTFLAG 0x1b6f
 #define VENC_VIDEO_TST_EN 0x1b70
 #define VENC_VIDEO_TST_MDSEL 0x1b71
@@ -760,6 +780,7 @@
 #define VENC_VIDEO_TST_CLRBAR_WIDTH 0x1b76
 #define VENC_VIDEO_TST_VDCNT_STSET 0x1b77
 #define VENC_VDAC_DACSEL0 0x1b78
+#define		VENC_VDAC_SEL_ATV_DMD           BIT(5)
 #define VENC_VDAC_DACSEL1 0x1b79
 #define VENC_VDAC_DACSEL2 0x1b7a
 #define VENC_VDAC_DACSEL3 0x1b7b
@@ -780,6 +801,7 @@
 #define VENC_VDAC_DAC5_GAINCTRL 0x1bfa
 #define VENC_VDAC_DAC5_OFFSET 0x1bfb
 #define VENC_VDAC_FIFO_CTRL 0x1bfc
+#define		VENC_VDAC_FIFO_EN_ENCI_ENABLE   BIT(13)
 #define ENCL_TCON_INVERT_CTL 0x1bfd
 #define ENCP_VIDEO_EN 0x1b80
 #define ENCP_VIDEO_SYNC_MODE 0x1b81
@@ -795,6 +817,7 @@
 #define ENCP_VIDEO_SYNC_OFFST 0x1b8b
 #define ENCP_VIDEO_MACV_OFFST 0x1b8c
 #define ENCP_VIDEO_MODE 0x1b8d
+#define		ENCP_VIDEO_MODE_DE_V_HIGH       BIT(14)
 #define ENCP_VIDEO_MODE_ADV 0x1b8e
 #define ENCP_DBG_PX_RST 0x1b90
 #define ENCP_DBG_LN_RST 0x1b91
@@ -873,6 +896,11 @@
 #define C656_FS_LNED 0x1be7
 #define ENCI_VIDEO_MODE 0x1b00
 #define ENCI_VIDEO_MODE_ADV 0x1b01
+#define		ENCI_VIDEO_MODE_ADV_DMXMD(val)          (val & 0x3)
+#define		ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22   BIT(2)
+#define		ENCI_VIDEO_MODE_ADV_YBW_MEDIUM          (0 << 4)
+#define		ENCI_VIDEO_MODE_ADV_YBW_LOW             (0x1 << 4)
+#define		ENCI_VIDEO_MODE_ADV_YBW_HIGH            (0x2 << 4)
 #define ENCI_VIDEO_FSC_ADJ 0x1b02
 #define ENCI_VIDEO_BRIGHT 0x1b03
 #define ENCI_VIDEO_CONT 0x1b04
@@ -943,13 +971,17 @@
 #define ENCI_DBG_MAXPX 0x1b4c
 #define ENCI_DBG_MAXLN 0x1b4d
 #define ENCI_MACV_MAX_AMP 0x1b50
+#define		ENCI_MACV_MAX_AMP_ENABLE_CHANGE BIT(15)
+#define		ENCI_MACV_MAX_AMP_VAL(val)      (val & 0x83ff)
 #define ENCI_MACV_PULSE_LO 0x1b51
 #define ENCI_MACV_PULSE_HI 0x1b52
 #define ENCI_MACV_BKP_MAX 0x1b53
 #define ENCI_CFILT_CTRL 0x1b54
+#define		ENCI_CFILT_CMPT_SEL_HIGH        BIT(1)
 #define ENCI_CFILT7 0x1b55
 #define ENCI_YC_DELAY 0x1b56
 #define ENCI_VIDEO_EN 0x1b57
+#define		ENCI_VIDEO_EN_ENABLE            BIT(0)
 #define ENCI_DVI_HSO_BEGIN 0x1c00
 #define ENCI_DVI_HSO_END 0x1c01
 #define ENCI_DVI_VSO_BLINE_EVN 0x1c02
@@ -961,6 +993,10 @@
 #define ENCI_DVI_VSO_END_EVN 0x1c08
 #define ENCI_DVI_VSO_END_ODD 0x1c09
 #define ENCI_CFILT_CTRL2 0x1c0a
+#define		ENCI_CFILT_CMPT_CR_DLY(delay)   (delay & 0xf)
+#define		ENCI_CFILT_CMPT_CB_DLY(delay)   ((delay & 0xf) << 4)
+#define		ENCI_CFILT_CVBS_CR_DLY(delay)   ((delay & 0xf) << 8)
+#define		ENCI_CFILT_CVBS_CB_DLY(delay)   ((delay & 0xf) << 12)
 #define ENCI_DACSEL_0 0x1c0b
 #define ENCI_DACSEL_1 0x1c0c
 #define ENCP_DACSEL_0 0x1c0d
@@ -975,6 +1011,8 @@
 #define ENCI_TST_CLRBAR_WIDTH 0x1c16
 #define ENCI_TST_VDCNT_STSET 0x1c17
 #define ENCI_VFIFO2VD_CTL 0x1c18
+#define		ENCI_VFIFO2VD_CTL_ENABLE        BIT(0)
+#define		ENCI_VFIFO2VD_CTL_VD_SEL(val)   ((val & 0xff) << 8)
 #define ENCI_VFIFO2VD_PIXEL_START 0x1c19
 #define ENCI_VFIFO2VD_PIXEL_END 0x1c1a
 #define ENCI_VFIFO2VD_LINE_TOP_START 0x1c1b
@@ -1037,6 +1075,7 @@
 #define VENC_VDAC_DAC5_FILT_CTRL0 0x1c56
 #define VENC_VDAC_DAC5_FILT_CTRL1 0x1c57
 #define VENC_VDAC_DAC0_FILT_CTRL0 0x1c58
+#define		VENC_VDAC_DAC0_FILT_CTRL0_EN    BIT(0)
 #define VENC_VDAC_DAC0_FILT_CTRL1 0x1c59
 #define VENC_VDAC_DAC1_FILT_CTRL0 0x1c5a
 #define VENC_VDAC_DAC1_FILT_CTRL1 0x1c5b
@@ -1442,6 +1481,18 @@
 #define		VIU2_SEL_VENC_ENCP	(2 << 2)
 #define		VIU2_SEL_VENC_ENCT	(3 << 2)
 #define VPU_HDMI_SETTING 0x271b
+#define		VPU_HDMI_ENCI_DATA_TO_HDMI      BIT(0)
+#define		VPU_HDMI_ENCP_DATA_TO_HDMI      BIT(1)
+#define		VPU_HDMI_INV_HSYNC              BIT(2)
+#define		VPU_HDMI_INV_VSYNC              BIT(3)
+#define		VPU_HDMI_OUTPUT_CRYCB           (0 << 5)
+#define		VPU_HDMI_OUTPUT_YCBCR           (1 << 5)
+#define		VPU_HDMI_OUTPUT_YCRCB           (2 << 5)
+#define		VPU_HDMI_OUTPUT_CBCRY           (3 << 5)
+#define		VPU_HDMI_OUTPUT_CBYCR           (4 << 5)
+#define		VPU_HDMI_OUTPUT_CRCBY           (5 << 5)
+#define		VPU_HDMI_WR_RATE(rate)          (((rate & 0x1f) - 1) << 8)
+#define		VPU_HDMI_RD_RATE(rate)          (((rate & 0x1f) - 1) << 12)
 #define ENCI_INFO_READ 0x271c
 #define ENCP_INFO_READ 0x271d
 #define ENCT_INFO_READ 0x271e
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 7b7a0d8d737c..918df02d2aef 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -976,6 +976,7 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 	unsigned int eof_lines;
 	unsigned int sof_lines;
 	unsigned int vsync_lines;
+	u32 reg;
 
 	/* Use VENCI for 480i and 576i and double HDMI pixels */
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
@@ -1048,8 +1049,11 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		unsigned int lines_f1;
 
 		/* CVBS Filter settings */
-		writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
-		writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+		writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+			       priv->io_base + _REG(ENCI_CFILT_CTRL));
+		writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+			       ENCI_CFILT_CMPT_CB_DLY(1),
+			       priv->io_base + _REG(ENCI_CFILT_CTRL2));
 
 		/* Digital Video Select : Interlace, clk27 clk, external */
 		writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1071,8 +1075,9 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 				priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));
 
 		/* Macrovision max amplitude change */
-		writel_relaxed(vmode->enci.macv_max_amp,
-				priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+		writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+			       ENCI_MACV_MAX_AMP_VAL(vmode->enci.macv_max_amp),
+			       priv->io_base + _REG(ENCI_MACV_MAX_AMP));
 
 		/* Video mode */
 		writel_relaxed(vmode->enci.video_prog_mode,
@@ -1088,7 +1093,10 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		 * Bypass luma low pass filter
 		 * No macrovision on CSYNC
 		 */
-		writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+		writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+			       ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+			       ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+			       priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
 
 		writel(vmode->enci.sch_adjust,
 				priv->io_base + _REG(ENCI_VIDEO_SCH));
@@ -1104,8 +1112,17 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		/* UNreset Interlaced TV Encoder */
 		writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));
 
-		/* Enable Vfifo2vd, Y_Cb_Y_Cr select */
-		writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+		/*
+		 * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+		 * Corresponding value:
+		 * Y  => 00 or 10
+		 * Cb => 01
+		 * Cr => 11
+		 * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+		 */
+		writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+			       ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+			       priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
 
 		/* Timings */
 		writel_relaxed(vmode->enci.pixel_start,
@@ -1127,7 +1144,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);
 
 		/* Interlace video enable */
-		writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+		writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+			       priv->io_base + _REG(ENCI_VIDEO_EN));
 
 		lines_f0 = mode->vtotal >> 1;
 		lines_f1 = lines_f0 + 1;
@@ -1374,7 +1392,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
 
 		/* Set DE signal’s polarity is active high */
-		writel_bits_relaxed(BIT(14), BIT(14),
+		writel_bits_relaxed(ENCP_VIDEO_MODE_DE_V_HIGH,
+				    ENCP_VIDEO_MODE_DE_V_HIGH,
 				    priv->io_base + _REG(ENCP_VIDEO_MODE));
 
 		/* Program DE timing */
@@ -1493,13 +1512,39 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCP);
 	}
 
-	writel_relaxed((use_enci ? 1 : 2) |
-		       (mode->flags & DRM_MODE_FLAG_PHSYNC ? 1 << 2 : 0) |
-		       (mode->flags & DRM_MODE_FLAG_PVSYNC ? 1 << 3 : 0) |
-		       4 << 5 |
-		       (venc_repeat ? 1 << 8 : 0) |
-		       (hdmi_repeat ? 1 << 12 : 0),
-		       priv->io_base + _REG(VPU_HDMI_SETTING));
+	/* Set VPU HDMI setting */
+	/* Select ENCP or ENCI data to HDMI */
+	if (use_enci)
+		reg = VPU_HDMI_ENCI_DATA_TO_HDMI;
+	else
+		reg = VPU_HDMI_ENCP_DATA_TO_HDMI;
+
+	/* Invert polarity of HSYNC from VENC */
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		reg |= VPU_HDMI_INV_HSYNC;
+
+	/* Invert polarity of VSYNC from VENC */
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		reg |= VPU_HDMI_INV_VSYNC;
+
+	/* Output data format: CbYCr */
+	reg |= VPU_HDMI_OUTPUT_CBYCR;
+
+	/*
+	 * Write rate to the async FIFO between VENC and HDMI.
+	 * One write every 2 wr_clk.
+	 */
+	if (venc_repeat)
+		reg |= VPU_HDMI_WR_RATE(2);
+
+	/*
+	 * Read rate to the async FIFO between VENC and HDMI.
+	 * One read every 2 wr_clk.
+	 */
+	if (hdmi_repeat)
+		reg |= VPU_HDMI_RD_RATE(2);
+
+	writel_relaxed(reg, priv->io_base + _REG(VPU_HDMI_SETTING));
 
 	priv->venc.hdmi_repeat = hdmi_repeat;
 	priv->venc.venc_repeat = venc_repeat;
@@ -1512,12 +1557,17 @@ EXPORT_SYMBOL_GPL(meson_venc_hdmi_mode_set);
 void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			       struct meson_cvbs_enci_mode *mode)
 {
+	u32 reg;
+
 	if (mode->mode_tag == priv->venc.current_mode)
 		return;
 
 	/* CVBS Filter settings */
-	writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
-	writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+	writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+		       priv->io_base + _REG(ENCI_CFILT_CTRL));
+	writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+		       ENCI_CFILT_CMPT_CB_DLY(1),
+		       priv->io_base + _REG(ENCI_CFILT_CTRL2));
 
 	/* Digital Video Select : Interlace, clk27 clk, external */
 	writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1539,8 +1589,9 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));
 
 	/* Macrovision max amplitude change */
-	writel_relaxed(0x8100 + mode->macv_max_amp,
-			priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+	writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+		       ENCI_MACV_MAX_AMP_VAL(mode->macv_max_amp),
+		       priv->io_base + _REG(ENCI_MACV_MAX_AMP));
 
 	/* Video mode */
 	writel_relaxed(mode->video_prog_mode,
@@ -1556,7 +1607,10 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	 * Bypass luma low pass filter
 	 * No macrovision on CSYNC
 	 */
-	writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+	writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+		       ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+		       ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+		       priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
 
 	writel(mode->sch_adjust, priv->io_base + _REG(ENCI_VIDEO_SCH));
 
@@ -1588,16 +1642,50 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	/* UNreset Interlaced TV Encoder */
 	writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));
 
-	/* Enable Vfifo2vd, Y_Cb_Y_Cr select */
-	writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+	/*
+	 * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+	 * Corresponding value:
+	 * Y  => 00 or 10
+	 * Cb => 01
+	 * Cr => 11
+	 * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+	 */
+	writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+		       ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+		       priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
 
 	/* Power UP Dacs */
 	writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_SETTING));
 
 	/* Video Upsampling */
-	writel_relaxed(0x0061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
-	writel_relaxed(0x4061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
-	writel_relaxed(0x5061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));
+	/*
+	 * CTRL0, CTRL1 and CTRL2:
+	 * Filter0: input data sample every 2 cloks
+	 * Filter1: filtering and upsample enable
+	 */
+	reg = VENC_UPSAMPLE_CTRL_F0_2_CLK_RATIO | VENC_UPSAMPLE_CTRL_F1_EN |
+		VENC_UPSAMPLE_CTRL_F1_UPSAMPLE_EN;
+
+	/*
+	 * Upsample CTRL0:
+	 * Interlace High Bandwidth Luma
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_HIGH_LUMA | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
+
+	/*
+	 * Upsample CTRL1:
+	 * Interlace Pb
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PB | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
+
+	/*
+	 * Upsample CTRL2:
+	 * Interlace R
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PR | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));
 
 	/* Select Interlace Y DACs */
 	writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
@@ -1611,14 +1699,16 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);
 
 	/* Enable ENCI FIFO */
-	writel_relaxed(0x2000, priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));
+	writel_relaxed(VENC_VDAC_FIFO_EN_ENCI_ENABLE,
+		       priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));
 
 	/* Select ENCI DACs 0, 1, 4, and 5 */
 	writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_0));
 	writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_1));
 
 	/* Interlace video enable */
-	writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+	writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+		       priv->io_base + _REG(ENCI_VIDEO_EN));
 
 	/* Configure Video Saturation / Contrast / Brightness / Hue */
 	writel_relaxed(mode->video_saturation,
@@ -1631,7 +1721,8 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			priv->io_base + _REG(ENCI_VIDEO_HUE));
 
 	/* Enable DAC0 Filter */
-	writel_relaxed(0x1, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
+	writel_relaxed(VENC_VDAC_DAC0_FILT_CTRL0_EN,
+		       priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
 	writel_relaxed(0xfc48, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL1));
 
 	/* 0 in Macrovision register 0 */
@@ -1652,7 +1743,8 @@ unsigned int meson_venci_get_field(struct meson_drm *priv)
 
 void meson_venc_enable_vsync(struct meson_drm *priv)
 {
-	writel_relaxed(2, priv->io_base + _REG(VENC_INTCTRL));
+	writel_relaxed(VENC_INTCTRL_ENCI_LNRST_INT_EN,
+		       priv->io_base + _REG(VENC_INTCTRL));
 	regmap_update_bits(priv->hhi, HHI_GCLK_MPEG2, BIT(25), BIT(25));
 }
 
@@ -1680,7 +1772,8 @@ void meson_venc_init(struct meson_drm *priv)
 	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0);
 
 	/* Disable HDMI */
-	writel_bits_relaxed(0x3, 0,
+	writel_bits_relaxed(VPU_HDMI_ENCI_DATA_TO_HDMI |
+			    VPU_HDMI_ENCP_DATA_TO_HDMI, 0,
 			    priv->io_base + _REG(VPU_HDMI_SETTING));
 
 	/* Disable all encoders */
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 6313a519f257..7ecc6bb6c8f8 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -172,7 +172,8 @@ static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
 	struct meson_drm *priv = meson_venc_cvbs->priv;
 
 	/* VDAC0 source is not from ATV */
-	writel_bits_relaxed(BIT(5), 0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
+	writel_bits_relaxed(VENC_VDAC_SEL_ATV_DMD, 0,
+			    priv->io_base + _REG(VENC_VDAC_DACSEL0));
 
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu")) {
 		regmap_write(priv->hhi, HHI_VDAC_CNTL0, 1);
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 7/9] drm: meson: global clean-up

[Julien Masson]

This patch aims to:
- Add general and TODO comments
- Respect coding style for multi-line comments
- Align macro definitions
- Remove useless macro

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c   |  2 ++
 drivers/gpu/drm/meson/meson_dw_hdmi.h   | 12 ++++++----
 drivers/gpu/drm/meson/meson_registers.h | 31 +++++++++++--------------
 drivers/gpu/drm/meson/meson_vclk.c      |  4 +++-
 drivers/gpu/drm/meson/meson_venc.c      | 10 ++++----
 5 files changed, 33 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index df3f9ddd2234..1579ff76c1ed 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -428,6 +428,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	/* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */
 	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
 			       0x3, 0x3);
+
+	/* Enable cec_clk and hdcp22_tmdsclk_en */
 	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
 			       0x3 << 4, 0x3 << 4);
 
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.h b/drivers/gpu/drm/meson/meson_dw_hdmi.h
index 1b2ef043eb5c..08e1c14e4ea0 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.h
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.h
@@ -100,7 +100,8 @@
 #define HDMITX_TOP_INTR_RXSENSE_RISE	BIT(6)
 #define HDMITX_TOP_INTR_RXSENSE_FALL	BIT(7)
 
-/* Bit 14:12 RW tmds_sel: 3'b000=Output zero; 3'b001=Output normal TMDS data;
+/*
+ * Bit 14:12 RW tmds_sel: 3'b000=Output zero; 3'b001=Output normal TMDS data;
  *     3'b010=Output PRBS data; 3'b100=Output shift pattern. Default 0.
  * Bit 11: 9 RW shift_pttn_repeat: 0=New pattern every clk cycle; 1=New pattern
  *     every 2 clk cycles; ...; 7=New pattern every 8 clk cycles. Default 0.
@@ -135,7 +136,8 @@
 /* Bit  9: 0 RW tmds_clk_pttn[29:20]. Default 0. */
 #define HDMITX_TOP_TMDS_CLK_PTTN_23             (0x00B)
 
-/* Bit 1 RW shift_tmds_clk_pttn:1=Enable shifting clk pattern,
+/*
+ * Bit 1 RW shift_tmds_clk_pttn:1=Enable shifting clk pattern,
  * used when TMDS CLK rate = TMDS character rate /4. Default 0.
  * Bit 0 R  Reserved. Default 0.
  * [	1] shift_tmds_clk_pttn
@@ -143,12 +145,14 @@
  */
 #define HDMITX_TOP_TMDS_CLK_PTTN_CNTL           (0x00C)
 
-/* Bit 0 RW revocmem_wr_fail: Read back 1 to indicate Host write REVOC MEM
+/*
+ * Bit 0 RW revocmem_wr_fail: Read back 1 to indicate Host write REVOC MEM
  * failure, write 1 to clear the failure flag.  Default 0.
  */
 #define HDMITX_TOP_REVOCMEM_STAT                (0x00D)
 
-/* Bit	   1 R	filtered RxSense status
+/*
+ * Bit	   1 R	filtered RxSense status
  * Bit     0 R  filtered HPD status.
  */
 #define HDMITX_TOP_STAT0                        (0x00E)
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 537a779492bd..3581fb3d9727 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -406,19 +406,19 @@
 #define VPP_PREBLEND_CURRENT_XY 0x1d24
 #define VPP_POSTBLEND_CURRENT_XY 0x1d25
 #define VPP_MISC 0x1d26
-#define		VPP_PREBLEND_ENABLE	BIT(6)
-#define		VPP_POSTBLEND_ENABLE	BIT(7)
-#define		VPP_OSD2_ALPHA_PREMULT	BIT(8)
-#define		VPP_OSD1_ALPHA_PREMULT	BIT(9)
-#define		VPP_VD1_POSTBLEND	BIT(10)
-#define		VPP_VD2_POSTBLEND	BIT(11)
-#define		VPP_OSD1_POSTBLEND	BIT(12)
-#define		VPP_OSD2_POSTBLEND	BIT(13)
-#define		VPP_VD1_PREBLEND	BIT(14)
-#define		VPP_VD2_PREBLEND	BIT(15)
-#define		VPP_OSD1_PREBLEND	BIT(16)
-#define		VPP_OSD2_PREBLEND	BIT(17)
-#define		VPP_COLOR_MNG_ENABLE	BIT(28)
+#define		VPP_PREBLEND_ENABLE             BIT(6)
+#define		VPP_POSTBLEND_ENABLE            BIT(7)
+#define		VPP_OSD2_ALPHA_PREMULT          BIT(8)
+#define		VPP_OSD1_ALPHA_PREMULT          BIT(9)
+#define		VPP_VD1_POSTBLEND               BIT(10)
+#define		VPP_VD2_POSTBLEND               BIT(11)
+#define		VPP_OSD1_POSTBLEND              BIT(12)
+#define		VPP_OSD2_POSTBLEND              BIT(13)
+#define		VPP_VD1_PREBLEND                BIT(14)
+#define		VPP_VD2_PREBLEND                BIT(15)
+#define		VPP_OSD1_PREBLEND               BIT(16)
+#define		VPP_OSD2_PREBLEND               BIT(17)
+#define		VPP_COLOR_MNG_ENABLE            BIT(28)
 #define VPP_OFIFO_SIZE 0x1d27
 #define		VPP_OFIFO_SIZE_MASK             GENMASK(13, 0)
 #define		VPP_OFIFO_SIZE_DEFAULT          (0xfff << 20 | 0x1000)
@@ -629,6 +629,7 @@
 #define OSD34_SCI_WH_M1 0x3d29
 #define OSD34_SCO_H_START_END 0x3d2a
 #define OSD34_SCO_V_START_END 0x3d2b
+
 /* viu2 */
 #define VIU2_ADDR_START 0x1e00
 #define VIU2_ADDR_END 0x1eff
@@ -1611,7 +1612,6 @@
 #define OSD1_AFBCD_STATUS 0x31a8
 #define OSD1_AFBCD_PIXEL_HSCOPE 0x31a9
 #define OSD1_AFBCD_PIXEL_VSCOPE 0x31aa
-#define VIU_MISC_CTRL1 0x1a07
 
 /* add for gxm and 962e dv core2 */
 #define DOLBY_CORE2A_SWAP_CTRL1	0x3434
@@ -1626,8 +1626,6 @@
 #define VPU_MAFBC_COMMAND 0x3a05
 #define VPU_MAFBC_STATUS 0x3a06
 #define VPU_MAFBC_SURFACE_CFG 0x3a07
-
-/* osd afbc on g12a */
 #define VPU_MAFBC_HEADER_BUF_ADDR_LOW_S0 0x3a10
 #define VPU_MAFBC_HEADER_BUF_ADDR_HIGH_S0 0x3a11
 #define VPU_MAFBC_FORMAT_SPECIFIER_S0 0x3a12
@@ -1748,6 +1746,5 @@
 #define VPP_POST_BLEND_DUMMY_ALPHA 0x3969
 #define VPP_RDARB_MODE 0x3978
 #define VPP_RDARB_REQEN_SLV 0x3979
-#define VPU_RDARB_MODE_L2C1 0x279d
 
 #endif /* __MESON_REGISTERS_H */
diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index 26732f038d19..e7c2b439d0f7 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -495,6 +495,7 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
 		regmap_write(priv->hhi, HHI_HDMI_PLL_CNTL, 0x0b3a0400 | m);
 
 		/* Enable and reset */
+		/* TODO: add specific macro for g12a here */
 		regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
 				   0x3 << 28, 0x3 << 28);
 
@@ -969,7 +970,8 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
 		meson_venci_cvbs_clock_config(priv);
 		return;
 	} else if (target == MESON_VCLK_TARGET_DMT) {
-		/* The DMT clock path is fixed after the PLL:
+		/*
+		 * The DMT clock path is fixed after the PLL:
 		 * - automatic PLL freq + OD management
 		 * - vid_pll_div = VID_PLL_DIV_5
 		 * - vclk_div = 2
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 918df02d2aef..2835133ab676 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -61,9 +61,9 @@
 /* HHI Registers */
 #define HHI_GCLK_MPEG2		0x148 /* 0x52 offset in data sheet */
 #define HHI_VDAC_CNTL0		0x2F4 /* 0xbd offset in data sheet */
-#define HHI_VDAC_CNTL0_G12A	0x2EC /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A	0x2EC /* 0xbb offset in data sheet */
 #define HHI_VDAC_CNTL1		0x2F8 /* 0xbe offset in data sheet */
-#define HHI_VDAC_CNTL1_G12A	0x2F0 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A	0x2F0 /* 0xbc offset in data sheet */
 #define HHI_HDMI_PHY_CNTL0	0x3a0 /* 0xe8 offset in data sheet */
 
 struct meson_cvbs_enci_mode meson_cvbs_enci_pal = {
@@ -1085,7 +1085,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		writel_relaxed(vmode->enci.video_mode,
 				priv->io_base + _REG(ENCI_VIDEO_MODE));
 
-		/* Advanced Video Mode :
+		/*
+		 * Advanced Video Mode :
 		 * Demux shifting 0x2
 		 * Blank line end at line17/22
 		 * High bandwidth Luma Filter
@@ -1599,7 +1600,8 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	writel_relaxed(mode->video_mode,
 			priv->io_base + _REG(ENCI_VIDEO_MODE));
 
-	/* Advanced Video Mode :
+	/*
+	 * Advanced Video Mode :
 	 * Demux shifting 0x2
 	 * Blank line end at line17/22
 	 * High bandwidth Luma Filter
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 8/9] drm: meson: add macro used to enable HDMI PLL

[Julien Masson]

This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable
HDMI PLL.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_vclk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index e7c2b439d0f7..be6e152fc75a 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -96,6 +96,7 @@
 #define HHI_VDAC_CNTL1		0x2F8 /* 0xbe offset in data sheet */
 
 #define HHI_HDMI_PLL_CNTL	0x320 /* 0xc8 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL_EN	BIT(30)
 #define HHI_HDMI_PLL_CNTL2	0x324 /* 0xc9 offset in data sheet */
 #define HHI_HDMI_PLL_CNTL3	0x328 /* 0xca offset in data sheet */
 #define HHI_HDMI_PLL_CNTL4	0x32C /* 0xcb offset in data sheet */
@@ -468,7 +469,7 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
 
 		/* Enable and unreset */
 		regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
-				   0x7 << 28, 0x4 << 28);
+				   0x7 << 28, HHI_HDMI_PLL_CNTL_EN);
 
 		/* Poll for lock bit */
 		regmap_read_poll_timeout(priv->hhi, HHI_HDMI_PLL_CNTL,
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 8/9] drm: meson: add macro used to enable HDMI PLL

[Kevin Hilman]

Julien Masson <jmasson@baylibre.com> writes:

> This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable
> HDMI PLL.
>
> Signed-off-by: Julien Masson <jmasson@baylibre.com>
> ---
>  drivers/gpu/drm/meson/meson_vclk.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
> index e7c2b439d0f7..be6e152fc75a 100644
> --- a/drivers/gpu/drm/meson/meson_vclk.c
> +++ b/drivers/gpu/drm/meson/meson_vclk.c
> @@ -96,6 +96,7 @@
>  #define HHI_VDAC_CNTL1		0x2F8 /* 0xbe offset in data sheet */
>  
>  #define HHI_HDMI_PLL_CNTL	0x320 /* 0xc8 offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL_EN	BIT(30)
>  #define HHI_HDMI_PLL_CNTL2	0x324 /* 0xc9 offset in data sheet */
>  #define HHI_HDMI_PLL_CNTL3	0x328 /* 0xca offset in data sheet */
>  #define HHI_HDMI_PLL_CNTL4	0x32C /* 0xcb offset in data sheet */
> @@ -468,7 +469,7 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
>  
>  		/* Enable and unreset */
>  		regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
> -				   0x7 << 28, 0x4 << 28);
> +				   0x7 << 28, HHI_HDMI_PLL_CNTL_EN);

still using a magic const for the mask.  Can use GENMASK() for this?

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 8/9] drm: meson: add macro used to enable HDMI PLL

[Neil Armstrong]

On 25/06/2019 01:20, Kevin Hilman wrote:
> Julien Masson <jmasson@baylibre.com> writes:
> 
>> This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable
>> HDMI PLL.
>>
>> Signed-off-by: Julien Masson <jmasson@baylibre.com>
>> ---
>>  drivers/gpu/drm/meson/meson_vclk.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
>> index e7c2b439d0f7..be6e152fc75a 100644
>> --- a/drivers/gpu/drm/meson/meson_vclk.c
>> +++ b/drivers/gpu/drm/meson/meson_vclk.c
>> @@ -96,6 +96,7 @@
>>  #define HHI_VDAC_CNTL1		0x2F8 /* 0xbe offset in data sheet */
>>  
>>  #define HHI_HDMI_PLL_CNTL	0x320 /* 0xc8 offset in data sheet */
>> +#define HHI_HDMI_PLL_CNTL_EN	BIT(30)
>>  #define HHI_HDMI_PLL_CNTL2	0x324 /* 0xc9 offset in data sheet */
>>  #define HHI_HDMI_PLL_CNTL3	0x328 /* 0xca offset in data sheet */
>>  #define HHI_HDMI_PLL_CNTL4	0x32C /* 0xcb offset in data sheet */
>> @@ -468,7 +469,7 @@ void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m,
>>  
>>  		/* Enable and unreset */
>>  		regmap_update_bits(priv->hhi, HHI_HDMI_PLL_CNTL,
>> -				   0x7 << 28, 0x4 << 28);
>> +				   0x7 << 28, HHI_HDMI_PLL_CNTL_EN);

I'll do a pass on the PLL part since it needs much more work than a cleanup,
it's ok for me.

Neil

> 
> still using a magic const for the mask.  Can use GENMASK() for this?
> 
> Kevin
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 9/9] drm: meson: venc: set the correct macrovision max amplitude value

[Julien Masson]

According to the register description of ENCI_MACV_MAX_AMP, the
macrovision max amplitude value should be:
- hdmi 480i => 0xb
- hdmi 576i => 0x7

The max value is 0x7ff (10 bits).

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_venc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 2835133ab676..acad16ff7371 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -192,7 +192,7 @@ union meson_hdmi_venc_mode meson_hdmi_enci_mode_480i = {
 		.hso_end = 129,
 		.vso_even = 3,
 		.vso_odd = 260,
-		.macv_max_amp = 0x810b,
+		.macv_max_amp = 0xb,
 		.video_prog_mode = 0xf0,
 		.video_mode = 0x8,
 		.sch_adjust = 0x20,
@@ -212,7 +212,7 @@ union meson_hdmi_venc_mode meson_hdmi_enci_mode_576i = {
 		.hso_end = 129,
 		.vso_even = 3,
 		.vso_odd = 260,
-		.macv_max_amp = 8107,
+		.macv_max_amp = 0x7,
 		.video_prog_mode = 0xff,
 		.video_mode = 0x13,
 		.sch_adjust = 0x28,
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...)

[Kevin Hilman]

Julien Masson <jmasson@baylibre.com> writes:

> This patch series aims to clean-up differents parts of the drm meson
> code source.
>
> Couple macros have been defined and used to set several registers
> instead of using magic constants.
>
> I also took the opportunity to:
> - add/remove/update comments
> - remove useless code
> - minor fix/improvment

Nice set of cleanups, thanks!  I especially like the extra in-code
comments.

Could you also add to the cover-letter how this was tested, and on what
platforms so we know it's not going to introduce any regressions.

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...)

[Neil Armstrong]

On 25/06/2019 01:24, Kevin Hilman wrote:
> Julien Masson <jmasson@baylibre.com> writes:
> 
>> This patch series aims to clean-up differents parts of the drm meson
>> code source.
>>
>> Couple macros have been defined and used to set several registers
>> instead of using magic constants.
>>
>> I also took the opportunity to:
>> - add/remove/update comments
>> - remove useless code
>> - minor fix/improvment
> 
> Nice set of cleanups, thanks!  I especially like the extra in-code
> comments.
> 
> Could you also add to the cover-letter how this was tested, and on what
> platforms so we know it's not going to introduce any regressions.
> 
> Thanks,
> 
> Kevin
> 

Apart the wrong magic value in patch 4 that I'll fix while applying,
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

I'll run a few tests on all the supported SoC versions:
- GXBB
- GXL
- GXM
- G12A/G12B

and push to drm-misc-next.

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...)

[Neil Armstrong]

Hi Julien,

On 08/08/2019 16:12, Neil Armstrong wrote:
> On 25/06/2019 01:24, Kevin Hilman wrote:
>> Julien Masson <jmasson@baylibre.com> writes:
>>
>>> This patch series aims to clean-up differents parts of the drm meson
>>> code source.
>>>
>>> Couple macros have been defined and used to set several registers
>>> instead of using magic constants.
>>>
>>> I also took the opportunity to:
>>> - add/remove/update comments
>>> - remove useless code
>>> - minor fix/improvment
>>
>> Nice set of cleanups, thanks!  I especially like the extra in-code
>> comments.
>>
>> Could you also add to the cover-letter how this was tested, and on what
>> platforms so we know it's not going to introduce any regressions.
>>
>> Thanks,
>>
>> Kevin
>>
> 
> Apart the wrong magic value in patch 4 that I'll fix while applying,
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> I'll run a few tests on all the supported SoC versions:
> - GXBB
> - GXL
> - GXM
> - G12A/G12B

Tested on :
- 1024x768x60 DVI Dell monitor
- 3840x2160x60 HDMI2.0 Samsung TV

Tested :
- Simple DMT mode
- Advanced HDMI2.0 4k60 mode with SCDC negotiation and scrambling
- OSD layer and scaling
- Video layer and scaling

SoCs:
- GXBB: meson-gxbb-odroidc2
modetest -M meson -s 32:1024x768-60 -P 33@37:1024x768@AR24 -P 35@37:1024x768@NV12
modetest -M meson -s 32:1024x768-60 -P 33@37:1024x768@AR24 -P 35@37:1024x768*2@NV12
modetest -M meson -s 32:1024x768-60 -P 33@37:512x384*2@AR24 -P 35@37:2048x1536*0.5@NV12

modetest -M meson -s 32:3840x2160-60 -P 33@37:3840x2160@AR24 -P 35@37:3840x2160@NV12
modetest -M meson -s 32:3840x2160-60 -P 33@37:1920x1080*2@AR24 -P 35@37:3840x2160*0.8@NV12

No visual issues

- GXL: meson-gxl-s905x-libretech-cc
modetest -M meson -s 34:1024x768-60 -P 35@39:1024x768@AR24 -P 37@39:1024x768@NV12
modetest -M meson -s 34:1024x768-60 -P 35@39:1024x768@AR24 -P 37@39:1024x768*2@NV12
modetest -M meson -s 34:1024x768-60 -P 35@39:512x384*2@AR24 -P 37@39:2048x1536*0.5@NV12
modetest -M meson -s 34:3840x2160-60 -P 35@39:3840x2160@AR24 -P 37@39:3840x2160@NV12
modetest -M meson -s 34:3840x2160-60 -P 35@39:1920x1080*2@AR24 -P 37@39:3840x2160*0.8@NV12

No visual issues

- GXM: meson-gxm-khadas-vim2
modetest -M meson -s 32:1024x768-60 -P 33@37:1024x768@AR24 -P 35@37:1024x768@NV12
modetest -M meson -s 32:1024x768-60 -P 33@37:1024x768@AR24 -P 35@37:1024x768*2@NV12
modetest -M meson -s 32:1024x768-60 -P 33@37:512x384*2@AR24 -P 35@37:2048x1536*0.5@NV12

modetest -M meson -s 32:3840x2160-60 -P 33@37:3840x2160@AR24 -P 35@37:3840x2160@NV12
modetest -M meson -s 32:3840x2160-60 -P 33@37:1920x1080*2@AR24 -P 35@37:3840x2160*0.8@NV12

With the following fix on patch 4:
========><====================================
--- a/drivers/gpu/drm/meson/meson_vpp.c
+++ b/drivers/gpu/drm/meson/meson_vpp.c
@@ -98,7 +98,7 @@ void meson_vpp_init(struct meson_drm *priv)
                                    priv->io_base + _REG(VIU_MISC_CTRL1));
                writel_relaxed(VPP_PPS_DUMMY_DATA_MODE,
                               priv->io_base + _REG(VPP_DOLBY_CTRL));
-               writel_relaxed(0x108080,
+               writel_relaxed(0x1020080,
                                priv->io_base + _REG(VPP_DUMMY_DATA1));
        } else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
                writel_relaxed(0xf, priv->io_base + _REG(DOLBY_PATH_CTRL));
========><====================================

No visual issues

- G12A/G12B: meson-g12a-sei510

Issue found in patch 5, the following fix will be applied while applying onto drm-misc-next :
========><====================================
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -407,7 +407,7 @@ void meson_viu_init(struct meson_drm *priv)
                               VIU_OSD_BLEND_HOLD_LINES(4),
                               priv->io_base + _REG(VIU_OSD_BLEND_CTRL));

-               writel_relaxed(VIU_OSD1_POSTBLD_SRC_OSD1,
+               writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE,
                               priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
                writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE,
                               priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
========><====================================

modetest -M meson -s 34:800x600 -P 35@39:800x600@AR24 -P 37@39:800x600@NV12
modetest -M meson -s 34:800x600 -P 35@39:800x600@AR24 -P 37@39:800x600*2@NV12
modetest -M meson -s 34:800x600 -P 35@39:400x300*2@AR24 -P 37@39:1600x600*0.5@NV12
modetest -M meson -s 34:3840x2160-60 -P 35@39:3840x2160@AR24 -P 37@39:3840x2160@NV12
modetest -M meson -s 34:3840x2160-60 -P 35@39:1920x1080*2@AR24 -P 37@39:3840x2160*0.8@NV12

No visual issues

> 
> and push to drm-misc-next.
> 
> Neil
> 

Applying to drm-misc-next with the fixes

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic