From: Maxime Jourdan <mjourdan@baylibre.com>
To: afl1 <afl2001@gmail.com>
Cc: linux-amlogic@lists.infradead.org
Subject: Re: [PATCH] pinctrl: add tsin pins for meson-gxbb/gxl/gxm
Date: Thu, 13 Jun 2019 21:23:30 +0200 [thread overview]
Message-ID: <CAMO6naw_PvmiXpNNnF-9ASrP1DmkxqnBCKhB1UBn0m4cb_LunQ@mail.gmail.com> (raw)
In-Reply-To: <20190613175047.18176-1-afl2001@gmail.com>
Hi afl1,
On Thu, Jun 13, 2019 at 7:51 PM afl1 <afl2001@gmail.com> wrote:
>
> ---
> drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 31 ++++++++++++++++++++++
> drivers/pinctrl/meson/pinctrl-meson-gxl.c | 13 +++++++++
> 2 files changed, 44 insertions(+)
>
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> index 4edeb4cae72a..6de3d58277a1 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> @@ -237,10 +237,21 @@ static const unsigned int hdmi_hpd_pins[] = { GPIOH_0 };
> static const unsigned int hdmi_sda_pins[] = { GPIOH_1 };
> static const unsigned int hdmi_scl_pins[] = { GPIOH_2 };
>
> +static const unsigned int tsin_a_d_valid_pins[] = { GPIOY_0 };
> +static const unsigned int tsin_a_sop_pins[] = { GPIOY_1 };
> +static const unsigned int tsin_a_clk_pins[] = { GPIOY_2 };
> +static const unsigned int tsin_a_d0_pins[] = { GPIOY_3 };
> +static const unsigned int tsin_a_dp_pins[] = { GPIOY_4, GPIOY_5, GPIOY_6, GPIOY_7, GPIOY_8, GPIOY_9, GPIOY_10 };
> +static const unsigned int tsin_a_fail_pins[] = { GPIOY_11 };
> static const unsigned int i2s_out_ch23_y_pins[] = { GPIOY_8 };
> static const unsigned int i2s_out_ch45_y_pins[] = { GPIOY_9 };
> static const unsigned int i2s_out_ch67_y_pins[] = { GPIOY_10 };
>
> +static const unsigned int tsin_b_d_valid_pins[] = { GPIOX_6 };
> +static const unsigned int tsin_b_sop_pins[] = { GPIOX_7 };
> +static const unsigned int tsin_b_clk_pins[] = { GPIOX_8 };
> +static const unsigned int tsin_b_d0_pins[] = { GPIOX_9 };
> +
> static const unsigned int spdif_out_y_pins[] = { GPIOY_12 };
>
> static const unsigned int gen_clk_out_pins[] = { GPIOY_15 };
> @@ -443,8 +454,18 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
> GROUP(pwm_a_x, 3, 17),
> GROUP(pwm_e, 2, 30),
> GROUP(pwm_f_x, 3, 18),
> + GROUP(tsin_b_d_valid, 3, 9),
> + GROUP(tsin_b_sop, 3, 8),
> + GROUP(tsin_b_clk, 3, 10),
> + GROUP(tsin_b_d0, 3, 7),
>
> /* Bank Y */
> + GROUP(tsin_a_fail, 3, 3),
> + GROUP(tsin_a_d_valid, 3, 2),
> + GROUP(tsin_a_sop, 3, 1),
> + GROUP(tsin_a_clk, 3, 0),
> + GROUP(tsin_a_d0, 3, 4),
> + GROUP(tsin_a_dp, 3, 5),
> GROUP(uart_cts_c, 1, 19),
> GROUP(uart_rts_c, 1, 18),
> GROUP(uart_tx_c, 1, 17),
> @@ -607,6 +628,14 @@ static const char * const gpio_periphs_groups[] = {
> "GPIOX_20", "GPIOX_21", "GPIOX_22",
> };
>
> +static const char * const tsin_a_groups[] = {
> + "tsin_a_clk", "tsin_a_sop", "tsin_a_d_valid", "tsin_a_d0",
> + "tsin_a_dp", "tsin_a_fail",
> +};
> +static const char * const tsin_b_groups[] = {
> + "tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
> +};
> +
> static const char * const emmc_groups[] = {
> "emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
> };
> @@ -798,6 +827,8 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
> FUNCTION(i2s_out),
> FUNCTION(spdif_out),
> FUNCTION(gen_clk_out),
> + FUNCTION(tsin_a),
> + FUNCTION(tsin_b),
> };
>
> static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> index 0c0a5018102b..c14090a56b61 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> @@ -246,6 +246,10 @@ static const unsigned int tsin_a_fail_pins[] = { GPIODV_11 };
> static const unsigned int tsin_a_dp_pins[] = {
> GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
> };
> +static const unsigned int tsin_b_clk_pins[] = { GPIOH_6 };
> +static const unsigned int tsin_b_d0_pins[] = { GPIOH_7 };
> +static const unsigned int tsin_b_sop_pins[] = { GPIOH_8 };
> +static const unsigned int tsin_b_d_valid_pins[] = { GPIOH_9 };
>
> static const struct pinctrl_pin_desc meson_gxl_aobus_pins[] = {
> MESON_PIN(GPIOAO_0),
> @@ -460,6 +464,10 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
> GROUP(i2s_out_lr_clk, 6, 24),
> GROUP(i2s_out_ch01, 6, 23),
> GROUP(spdif_out_h, 6, 28),
> + GROUP(tsin_b_d0, 6, 17),
> + GROUP(tsin_b_sop, 6, 18),
> + GROUP(tsin_b_d_valid, 6, 19),
> + GROUP(tsin_b_clk, 6, 20),
>
> /* Bank DV */
> GROUP(uart_tx_b, 2, 16),
> @@ -694,6 +702,10 @@ static const char * const tsin_a_groups[] = {
> "tsin_a_d_valid", "tsin_a_d0",
> "tsin_a_dp", "tsin_a_fail",
> };
> +static const char * const tsin_b_groups[] = {
> + "tsin_b_clk", "tsin_b_sop",
> + "tsin_b_d_valid", "tsin_b_d0",
> +};
>
> static const char * const gpio_aobus_groups[] = {
> "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
> @@ -770,6 +782,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
> FUNCTION(spdif_out),
> FUNCTION(eth_led),
> FUNCTION(tsin_a),
> + FUNCTION(tsin_b),
> };
>
> static struct meson_pmx_func meson_gxl_aobus_functions[] = {
> --
> 2.17.1
>
Thank you for working on the meson pinctrl.
When sending a patch, please always make sure that:
- You are sending a full commit, including a commit message that
explains your changes. Commit your changes locally, and then you can
use something like 'git send-email'
- You are rebased on a recent iteration of the kernel (e.g latest
-rc, or even better, the amlogic arch integ tree:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git).
Your patch applies so maybe you already did that.
- You send it to the correct people / lists. You can get this
information by running './scripts/get_maintainer.pl
drivers/pinctrl/meson/'
- You sign-off the commit, by adding "Signed-off-by: afl1
<afl2001@gmail.com>" at the end of the commit description. If you have
a real name, feel free to use it :P .
- You run your patch through checkpatch, e.g './scripts/checkpatch.pl
--strict -g HEAD'
Cheers,
Maxime
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-06-13 19:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 17:50 [PATCH] pinctrl: add tsin pins for meson-gxbb/gxl/gxm afl1
2019-06-13 18:02 ` afl1
2019-06-13 19:23 ` Maxime Jourdan [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-06-13 18:38 afl1
2019-06-13 19:51 ` Kevin Hilman
2019-02-03 11:53 Add " afl1
2019-02-03 11:53 ` [PATCH] pinctrl: add " afl1
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMO6naw_PvmiXpNNnF-9ASrP1DmkxqnBCKhB1UBn0m4cb_LunQ@mail.gmail.com \
--to=mjourdan@baylibre.com \
--cc=afl2001@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).