Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: bigeasy@linutronix.de (Sebastian Andrzej Siewior)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 13/16] tty: serial: 8250_dma: add pm runtime
Date: Wed, 10 Sep 2014 21:30:08 +0200
Message-ID: <1410377411-26656-14-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1410377411-26656-1-git-send-email-bigeasy@linutronix.de>

There is nothing to do for RPM in the RX path. If the HW goes off then it
won't assert the DMA line and the transfer won't happen. So we hope that
the HW does not go off for RX to work (DMA or PIO makes no difference
here).

For TX the situation is slightly different. RPM is enabled on
start_tx(). We can't disable RPM on DMA complete callback because there
is still data in the FIFO which is being sent. We have to wait until
the FIFO is empty before we disable it.
For this to happen we fake a TX sent error and enable THRI. Once the
FIFO is empty we receive an interrupt and since the TTY-buffer is still
empty we "put RPM" via __stop_tx(). Should it been filed then in the
start_tx() path we should program the DMA transfer and remove the error
flag and the THRI bit.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/tty/serial/8250/8250_dma.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 898a6781d0b3..e8850219b150 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -21,6 +21,7 @@ static void __dma_tx_complete(void *param)
 	struct uart_8250_dma	*dma = p->dma;
 	struct circ_buf		*xmit = &p->port.state->xmit;
 	unsigned long	flags;
+	bool en_thri = false;
 
 	dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
 				UART_XMIT_SIZE, DMA_TO_DEVICE);
@@ -40,11 +41,16 @@ static void __dma_tx_complete(void *param)
 		int ret;
 
 		ret = serial8250_tx_dma(p);
-		if (ret) {
-			dma->tx_err = 1;
-			p->ier |= UART_IER_THRI;
-			serial_port_out(&p->port, UART_IER, p->ier);
-		}
+		if (ret)
+			en_thri = true;
+
+	} else if (p->capabilities & UART_CAP_RPM)
+		en_thri = true;
+
+	if (en_thri) {
+		dma->tx_err = 1;
+		p->ier |= UART_IER_THRI;
+		serial_port_out(&p->port, UART_IER, p->ier);
 	}
 
 	spin_unlock_irqrestore(&p->port.lock, flags);
-- 
2.1.0

  parent reply index

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-10 19:29 [PATCH 00/16 v9] omap 8250 based uart + DMA Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 01/16] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 02/16] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-29  9:46   ` Frans Klaver
2014-09-29 13:39     ` Sebastian Andrzej Siewior
2014-09-10 19:29 ` [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2015-02-09 13:34   ` Nicolas Schichan
2015-02-09 23:34     ` Peter Hurley
2015-02-10  9:32       ` Sebastian Andrzej Siewior
2015-02-10 12:04       ` Nicolas Schichan
2015-02-10 17:46         ` Peter Hurley
2015-02-11 20:01           ` Peter Hurley
2015-02-11 20:03             ` Tony Lindgren
2015-02-11 20:42               ` Peter Hurley
2015-02-12  8:45                 ` Sebastian Andrzej Siewior
2015-02-12  9:40                   ` Russell King - ARM Linux
2015-02-12 16:32                   ` Peter Hurley
2015-02-12 19:23                     ` Sebastian Andrzej Siewior
2015-02-12 19:55                       ` Peter Hurley
2015-02-12 20:34                         ` Sebastian Andrzej Siewior
2015-02-13 18:51                         ` Sebastian Andrzej Siewior
2015-02-13 23:15                           ` Russell King - ARM Linux
2015-02-15 17:32                             ` [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Sebastian Andrzej Siewior
2015-05-12 20:25                               ` Tony Lindgren
2014-09-10 19:29 ` [PATCH 04/16] tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 05/16] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-11 11:19   ` Heikki Krogerus
2014-09-10 19:30 ` [PATCH 06/16] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-11 11:57   ` Peter Hurley
2014-09-16 17:01     ` Sebastian Andrzej Siewior
2014-09-29  9:38   ` Frans Klaver
2014-09-29 13:27     ` Sebastian Andrzej Siewior
2014-09-29 13:34       ` Frans Klaver
2014-09-10 19:30 ` [PATCH 07/16] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 08/16] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-11 11:17   ` Heikki Krogerus
2014-09-11 11:42     ` Sebastian Andrzej Siewior
2014-09-11 12:32       ` Peter Hurley
2014-09-11 12:50         ` Sebastian Andrzej Siewior
2014-09-11 14:35           ` Peter Hurley
2014-09-15 17:01             ` Sebastian Andrzej Siewior
2014-09-16 16:55               ` Sebastian Andrzej Siewior
2014-09-17 12:20                 ` Peter Hurley
2014-09-17 16:25                   ` Sebastian Andrzej Siewior
2014-09-29 16:15                   ` Sebastian Andrzej Siewior
2014-09-11 15:11           ` Frans Klaver
2014-09-11 16:04             ` Sebastian Andrzej Siewior
2014-09-11 17:04               ` Frans Klaver
2014-09-12  7:23                 ` Sebastian Andrzej Siewior
     [not found]                   ` <20140912094010.GE28458@ci00147.xsens-tech.local>
2014-09-12  9:51                     ` Sebastian Andrzej Siewior
2014-09-12 10:28                       ` Frans Klaver
2014-09-15 16:42                         ` Sebastian Andrzej Siewior
2014-09-16  9:05                           ` Frans Klaver
2014-09-16 12:42                             ` Frans Klaver
2014-09-16 14:23                               ` Frans Klaver
2014-09-17 10:28                           ` Frans Klaver
2014-09-21 20:41                             ` Sebastian Andrzej Siewior
2014-09-22  9:28                               ` Frans Klaver
2014-09-24  7:56                                 ` Sebastian Andrzej Siewior
2014-09-25 15:14                                 ` Sebastian Andrzej Siewior
2014-09-25 15:18                                   ` Frans Klaver
2014-09-29  8:50                                   ` Frans Klaver
2014-09-29  9:54                                     ` Sebastian Andrzej Siewior
2014-09-29 10:30                                       ` Frans Klaver
2014-09-30  8:44                                         ` Frans Klaver
2014-10-02 10:27                                           ` Sebastian Andrzej Siewior
2014-10-13 14:55                                             ` Frans Klaver
2014-09-23 17:03                               ` Peter Hurley
2014-09-24  7:53                                 ` Sebastian Andrzej Siewior
2014-09-25 10:42                                   ` Sebastian Andrzej Siewior
2014-09-25 11:31                                     ` Peter Hurley
2014-09-25 13:11                                       ` Sebastian Andrzej Siewior
2014-09-17 16:34       ` Sebastian Andrzej Siewior
2014-09-19 10:22         ` Heikki Krogerus
2014-09-19 10:58           ` Sebastian Andrzej Siewior
2014-09-19 11:25             ` Peter Hurley
2014-09-22  7:46             ` Heikki Krogerus
2014-09-25  9:24               ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 11/16] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 12/16] tty: serial: 8250_dma: handle the UART RDI event while DMA remains idle Sebastian Andrzej Siewior
2014-09-29  9:23   ` Frans Klaver
2014-09-10 19:30 ` Sebastian Andrzej Siewior [this message]
2014-09-29  9:26   ` [PATCH 13/16] tty: serial: 8250_dma: add pm runtime Frans Klaver
2014-09-29  9:56     ` Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 14/16] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 15/16] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-09-10 19:30 ` [PATCH 16/16] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-12 22:43 ` [PATCH 00/16 v9] omap 8250 based uart + DMA Tony Lindgren
2014-09-15 11:50   ` Sebastian Andrzej Siewior
2014-09-16 12:57     ` Sebastian Andrzej Siewior
2014-09-16 16:48       ` Tony Lindgren
2014-09-16 21:30         ` Tony Lindgren
2014-09-17  8:38           ` Sebastian Andrzej Siewior
2014-09-17  9:05 ` Sebastian Andrzej Siewior
2014-09-26 16:02   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410377411-26656-14-git-send-email-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git