linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [v1, 1/1] gpio: dts: aspeed: Add SGPIO driver
@ 2019-09-24 19:07 Hongwei Zhang
  2019-09-25  7:31 ` Bartosz Golaszewski
  2019-09-25 19:19 ` Hongwei Zhang
  0 siblings, 2 replies; 3+ messages in thread
From: Hongwei Zhang @ 2019-09-24 19:07 UTC (permalink / raw)
  To: Andrew Jeffery, Linus Walleij, linux-gpio, Joel Stanley
  Cc: Mark Rutland, devicetree, Arnd Bergmann, linux-aspeed,
	Ard Biesheuvel, Masahiro Yamada, linux-kernel, Russell King,
	Mike Rapoport, Bartosz Golaszewski, Rob Herring,
	Benjamin Gaignard, Mauro Carvalho Chehab, Doug Anderson,
	Andrew Morton, Hongwei Zhang, linux-arm-kernel

Add SGPIO driver support for Aspeed AST2500 SoC.

Signed-off-by: Hongwei Zhang <hongweiz@ami.com>
---
 arch/arm/Kconfig                 |  2 ++
 arch/arm/boot/dts/aspeed-g5.dtsi | 16 +++++++++++++++-
 drivers/gpio/Kconfig             |  8 ++++++++
 drivers/gpio/Makefile            |  1 +
 4 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2436021..c9f08ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1460,6 +1460,8 @@ config ARCH_NR_GPIO
 	default 416 if ARCH_SUNXI
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
+	default 312 if MACH_ASPEED_G5
+	default 304 if MACH_ASPEED_G4
 	default 288 if ARCH_ROCKCHIP
 	default 264 if MACH_H4700
 	default 0
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 00f05bd..85da7ea 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -311,7 +311,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				compatible = "aspeed,ast2500-gpio";
-				reg = <0x1e780000 0x1000>;
+				reg = <0x1e780000 0x200>;
 				interrupts = <20>;
 				gpio-ranges = <&pinctrl 0 0 232>;
 				clocks = <&syscon ASPEED_CLK_APB>;
@@ -319,6 +319,20 @@
 				#interrupt-cells = <2>;
 			};
 
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				ngpios = <8>;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+			};
+
 			rtc: rtc@1e781000 {
 				compatible = "aspeed,ast2500-rtc";
 				reg = <0x1e781000 0x18>;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bb13c26..e94f903 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -120,6 +120,14 @@ config GPIO_ASPEED
 	help
 	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
 
+config SGPIO_ASPEED
+	bool "Aspeed SGPIO support"
+	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Aspeed AST2500 SGPIO functionality.
+
 config GPIO_ATH79
 	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
 	default y if ATH79
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a4e9117..bebbd82 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_GPIO_AMD_FCH)		+= gpio-amd-fch.o
 obj-$(CONFIG_GPIO_AMDPT)		+= gpio-amdpt.o
 obj-$(CONFIG_GPIO_ARIZONA)		+= gpio-arizona.o
 obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
+obj-$(CONFIG_SGPIO_ASPEED)		+= sgpio-aspeed.o
 obj-$(CONFIG_GPIO_ATH79)		+= gpio-ath79.o
 obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-09-25 19:20 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-24 19:07 [v1, 1/1] gpio: dts: aspeed: Add SGPIO driver Hongwei Zhang
2019-09-25  7:31 ` Bartosz Golaszewski
2019-09-25 19:19 ` Hongwei Zhang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).